Correlation between ambient temperature and animal body temperature

Correlation between ambient temperature and animal body temperature, Total:318 items.

The international standard classification for "Correlation between ambient temperature and animal body temperature" includes: Test conditions and procedures in general , Environmental testing , Fiber and cables , Optical equipment , Radiation measurements , Mechanical testing , Metrology and measurement in general .

The Chinese standard classification for "Correlation between ambient temperature and animal body temperature" includes: Environmental Condition and General Test Method , Basic standards and general methods , Optical communication equipment , Optical instrument in general , Nuclear instrument for exploration mining and technological detection , Mechanical vibration, impact equipment and dynamic balancing machine , Electrical system and equipment , Comprehensive Technology .

Military Standard of the People's Republic of China-General Armament Department

GJB 150.25-1992 Environmental test methods for military equipment vibration-noise-temperature test
GJB 573.20-1988 Fuze environment and performance test methods tactical use vibration-temperature test
GJB 573.17-1988 Fuze environment and performance test methods Transportation vibration-temperature test
GJB 150.24-1992 Environmental test methods for military equipment Temperature-humidity-vibration-height test
GJB 573.2-1988 Fuze environment and performance test methods Temperature and humidity test
GJB 595.8-1988 Environmental test methods for artillery optical instruments Temperature-humidity-vibration test
GJB 898-1990 General medical requirements for work cabin (room) temperature environment
GJB 898A-2004 General medical requirements and evaluation of temperature environment of work cabin (room)
GJB 573.7-1988 Fuze environment and performance test methods High and low temperature storage test

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 2423.63-2019 Environmental testing—Part 2:Test methods—Test:combined temperature(cold and heat)/low air pressure/vibration(mixed mode)
GB/T 4797.4-2019 Classification of environmental conditions—Environmental conditions appearing in nature—Solar radiation and temperature

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12085.15-1995 Optics and optical instruments－Environmental test methods－Combined ramdom vibration wideband－Reproducibility medium, in dry heat or cold
GB/T 8404.2-1987 Test methods for environmental properties of optical fibres--Temperature cycling
GB 10263.2-1988 Basic requirements and methods for environmental testing of radiation detectors Temperature testing
GB/T 10263.2-1988 Basic enviromental testing procedures for radiation detectors-Temperature test
GB/T 2424.22-1986 Basic environmental testing procedures for electric and electronic products - Guidance for combined temperature (cold and heat) vibration (sinusoidal) tests
GB/T 2424.24-1995 Basic environmental testing procedures for electric and electronic products Guidance for combined temperature(cold and heat)/low air pressure/vibration (sinusoidal)test
GB/T 12085.23-2022 Optics and photonics—Environmental test methods—Part 23：Low pressure combined with cold,ambient temperature and dry or damp heat
GB/T 12085.22-2022 Optics and photonics—Environmental test methods—Part 22：Combined cold,dry heat or temperature change with bump or random vibration
GB/T 12085.10-1989 Optics and optical instruments--Environmental test methods--Combined sinusoidal vibration,dry heat,cold
GB/T 4797.4-1989 Environmental conditions appearing in nature for electric and electronic products--Solar radiation and temperature
GB/T 4797.4-2006 Environmental conditions appearing in nature for electric and electronic products - Solar radiation and temperature

未注明发布机构

DIN ISO 9022-23:2015-03 Optics and photonics - Environmental test methods - Part 23: Low pressure combined with cold, ambient temperature and dry or damp heat
ASTM RR-G04-1000 2009 G0086-Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
DIN EN 843-1:1995 Mechanical properties at room temperature

Professional Standard - Agriculture

GB/T 44279-2024 Temperature-humdity-vibration-low pressure combined environmental testing system

Professional Standard - Aviation

HB 7256-1995 Ambient Temperature and Height Range of Aircrafts Self Cooling and Air Cooling Electrical Equipments
HB 6388-1990 Environmental conditions and test methods for airborne equipment Temperature-humidity-vibration

Taiwan Provincial Standard of the People's Republic of China

CNS 3376.4-2002 Electrical apparatus for explosive gas atmospheres-Part 4: Method of test for ignition temperature
CNS 3376-4-2002 Electrical apparatus for explosive gas atmospheres-Part 4: Method of test for ignition temperature
CNS 5070-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Cycle Test for Temperature)
CNS 4448-1992 Method of Test for Stiffness in Torsion of Plastics as a Function of Temperature
CNS 5071-1988 Environmental Testing Methods and Endurance Testing Methods for Discrete Semiconductor Devices (Cycle Test for Temperature & Humidity)

National Metrological Technical Specifications of the People's Republic of China

JJF 1270-2010 Calibration Specification for Temperature/Humidity/Vibration Combined Environmental Testing System

国家文物局

WW/T 0104-2020 Monitoring for museum environment - Monitoring terminal - Temperature and humidity

Group Standards of the People's Republic of China

T/HBEACA 004-2023 Fuel cell system startup test method based on ambient temperature and coolant temperature

Korean Agency for Technology and Standards (KATS)

KS W 0935-2018 Aerospace — Nuts, hexagonal, slotted(castellated), normal height, normal across flats, with MJ threads, classifications: 600 MPa(at ambient temperature)/120 ℃, 600 MPa(at ambient temperature)/ 235 ℃,
KS W ISO 9618:2007 Aerospace－Nuts, hexagonal, slotted(castellated), reduced height,normal across flats, with MJ threads, classifications：450 MPa (at ambient temperature)/120 ℃,450 MPa (at ambient temperature)/235 ℃,600 MPa (at ambient temperature)/425 ℃,900 MPa (at ambient
KS W ISO 12273-2016 Aerospace－Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 8940:2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS C 0076-1990(2017) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS W ISO 12272:2016 Aerospace－Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications：900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 12273:2005 Aerospace-Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 12273:2016 Aerospace－Nuts, anchor, self-locking, floating, self-aligning,two lug, with MJ threads, classifications: 900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and900 MPa(at ambient temperature)/425 ℃－Dimensions
KS W ISO 12272:2005 Aerospace-Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications:900 MPa(at ambient temperature)/235 ℃, 900 MPa(at ambient temperature)/315 ℃ and 900 MPa(at ambient temperature)/425 ℃-Dimensions
KS W ISO 7332:2009 Aerospace－Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications：1 100 MPa (at ambient temperature)/235 ℃, 1 100 MPa (at ambient temperature)/315 ℃ and 1 100 MPa (at ambient temperature)/425 ℃－Di
KS B ISO 9022-19-2022 Optics and optical instruments－Environmental test methods－Part 19：Temperature cycles combined with sinusoidal or random vibration
KS C 0076-2022 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
KS C 0076-1990(2022) Methods for determining distribution temperature and colour temperature or correlated co1our temperature of light sources
KS V 0824-2023 Temperature environmental test procedure for compressors and pumps under cryogenic condition
KS V 0824-2011(2021) Temperature environmental test procedure for compressors and pumps under cryogenic condition
KS W ISO 9156:2020 Aerospace — Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications:1 100 MPa (at ambient temperature)/235 °C,1 100 MPa (at ambient temperatur
KS C IEC 60068-2-39-2023 Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS M ISO 4672:2013 Rubber and plastics hoses-Sub-ambient temperature flexibility tests
KS M ISO 4672:2008 Rubber and plastics hoses－Sub-ambient temperature flexibility tests
KS C IEC 60079-4-2007(2022) Explosive atmospheres－Part 4：Method of test for ignition temperature
KS K ISO 6925-2007(2017) Textile floor coverings－Burning behaviour－Tablet test at ambient temperature
KS C IEC 60079-4-2007(2017) Explosive atmospheres－Part 4：Method of test for ignition temperature
KS C IEC 60079-4-2022 Explosive atmospheres－Part 4：Method of test for ignition temperature
KS M ISO 3384-2014 Rubber, vulcanized or thermoplastic－Determination of stress relaxation in compression at ambient and at elevated temperatures

International Organization for Standardization (ISO)

ISO 8279:1997 Aerospace - Nuts, hexagonal, plain, normal height, normal across flats, with MJ threads, classifications: 600 MPa (at ambient temperature)/120 °C, 600 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient tempe
ISO 9199:1998 Aerospace - Nuts, bihexagonal, self-locking, MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/730 °C, 1550 MPa (at
ISO 9618:1996 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (
ISO 9609:1996 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 °C, 450 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/425 °C, 900 MPa (at ambient tempe
ISO 13589:1998 Aerospace - Nuts, bihexagonal, self-locking, with counterbore and MJ threads, classifications: 1100 MPa (at ambient temperature)/425 °C, 1100 MPa (at ambient temperature)/650 °C, 1210 MPa (at ambient temperature)/425 °C, 1210 MPa (at ambient temperature)/
ISO 9609:2016 Aerospace - Nuts, hexagonal, plain, reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature) /120 degrees C, 450 MPa (at ambient temperature) /235 degrees C, 600 MPa (at ambient temperature) /425 degrees C, 9
ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
ISO 10096:1997 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, reduced across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa
ISO 12268:1997 Aerospace - Nuts, hexagonal, plain, reduced height, reduced across flats, with MJ threads; classifications: 450 MPa (at ambient temperature)/425 °C, 600 MPa (at ambient temperature)/235 °C, 600 MPa (at ambient temperature)/315 °C, 600 MPa (at ambient temp
ISO 12278:1999 Aerospace - Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/235 °C, 1250 MPa (at ambient temperature)/235 °C and 1550 MPa (at ambient tempera
ISO 12277:2000 Aerospace - Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1100 MPa (at ambient temperature)/120 °C, 1100 MPa (at ambient temperature)/235 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3209:2016 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/425
ISO 3224:1998 Aerospace - Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3209:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12274:1997 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads; classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12273:1997 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads; classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 7332:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 12273:2010 Aerospace - Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimensions
ISO 12272:1998 Aerospace - Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/315 °C and 900 MPa (at ambient temperature)/425 °C - Dimen
ISO 3168:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3223:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 8538:1999 Aerospace - Nuts, hexagonal, self-locking, with counterbore and captive washer, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 3221:1998 Aerospace - Nuts, anchor, self-locking, fixed, 90° corner, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - Dimensions
ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
ISO 3225:1998 Aerospace - Nuts, anchor, self-locking, fixed, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C - D
ISO 3191:1998 Aerospace - Nuts, anchor, self-locking, fixed, single lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425 °C
ISO 18338:2015 Metallic materials - Torsion test at ambient temperature
ISO 3222:1998 Aerospace - Nuts, anchor, self-locking, fixed, closed corner, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235 °C, 1100 MPa (at ambient temperature)/315 °C and 1100 MPa (at ambient temperature)/425
ISO 471:1977 Title missing - Legacy paper document
ISO 3384:1986 Rubber, vulcanized; Determination of stress relaxation in compression at ambient and at elevated temperatures
ISO 471:1995 Rubber - Temperatures, humidities and times for conditioning and testing
ISO 14068:2023 Greenhouse gas management and climate change management and related activities

BE-NBN

NBN X 10-005-1986 Moderate thermal environments - Determination of the PMV and PDD indices and specification of the conditions for thermal confort
NBN-ISO 815:1994 Rubber, vulcanized or thermoplastic. Determination of compression set at ambient, elevated or low temperatures
NBN-EN 24672-1993 Rubber and plastics hoses. Sub-ambiant temperature flexibility tests (ISO 4672:1988)
NBN X 10-002-1986 Specifications relating to the appliances and methods

British Standards Institution (BSI)

BS ISO 9618:2016 Aerospace - Nuts, hexagonal, slotted (castellated), reduced height, normal across flats, with MJ threads, classifications: 450 MPa (at ambient temperature)/120 degrees C, 450 MPa (at ambient temperature)/235 degrees C, 600 MPa (at ambient temperature)/425
BS A 359:2000 Nuts, barrel, self-locking, floating, with MJ threads, classifications. 900 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/235°C, 1250 MPa (at ambient temperature)/235°C, 1550 MPa (at ambient temperature)/235°C. Dimensions
BS A 337:1999 Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
BS ISO 9022-19:1995 Optics and optical instruments. Environmental test methods. Temperature cycles combined with sinusoidal or random vibration
BS EN 13485:2023 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
BS EN 60068-3-5:2002 Environmental testing - Guidance - Confirmation of the performance of temperature chambers
22/30454351 DC BS EN 13485. Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Tests, performance, suitability
BS ISO 12273:2010 Aerospace. Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 °C, 900 MPa (at ambient temperature)/ 315 °C and 900 MPa (at ambient temperature)/425 °C. Dimensions
BS A 321:1997 Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C and 900 MPa (at ambient temperature)/425°C. Dimensions
BS ISO 9022-23:2023 Optics and photonics. Environmental test methods. Low pressure combined with cold, ambient temperature and dry or damp heat
BS EN ISO 14505-2:2006 Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles. Determination of equivalent temperature
BS EN 13486:2023 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
BS EN 60068-2-39:2016 Environmental testing. Tests. Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BS A 330:1999 Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/235°C, 900 MPa (at ambient temperature)/315°C and 900 MPa (at ambient temperature)/425°C. Dimensions
BS EN 60068-3-6:2002 Environmental testing - Guidance - Confirmation of the performance of temperature/humidity chambers
BS A 339:1999 Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature)/235°C, 1100 MPa (at ambient temperature)/315°C and 1100 MPa (at ambient temperature)/425°C. Dimensions
22/30454354 DC BS EN 13486. Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods. Periodic verification
BS 7527-2.1:1991 Classification of environmental conditions - Environmental conditions appearing in nature - Temperature and humidity
BS EN 60721-2-1:2014 Classification of environmental conditions. Environmental conditions appearing in nature. Temperature and Humidity
22/30454721 DC BS EN 16214-3. Sustainability and greenhouse gas emission saving criteria for biomass for energy applications. Principles, criteria, indicators and verifiers - Part 3. Sustainability criteria related to environmental aspects
BS ISO 14505-4:2021 Ergonomics of the thermal environment. Evaluation of thermal environments in vehicles - Determination of the equivalent temperature by means of a numerical manikin
BS ISO 19212:2006 Adhesives - Determination of temperature dependence of shear strength
BS ISO 18338:2015 Metallic materials. Torsion test at ambient temperature
BS 1902-4.6:1985 Methods of testing refractory materials - Properties measured under an applied stress - Determination of resistance to abrasion at ambient temperature (abradability index at ambient temperature) (method 1902-406)
BS EN 60068-3-5:2018 Environmental testing. Supporting documentation and guidance. Confirmation of the performance of temperature chambers
DD CEN/TS 15922:2009 Fertilizers. Extraction of soluble phosphorus according to Petermann at ambient temperature
BS EN ISO 14644-2:2015 Cleanrooms and associated controlled environments. Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration

HU-MSZT

MSZ 8881/3-1970 Labeling of environment-related concepts and environment-related products
MSZ 8888/3-1971 Environmentally related testing. Humidity, heat test
MI 8884/5-1971 Environmentally related product raw material testing
MI 8884/3-1971 Classification of environmentally relevant product materials Metals
MI 8881-1985 Special climate markings for environmentally relevant products

American Welding Society (AWS)

WRC 575:2019 Revisiting the Bree Diagram: Derivation with Temperature Dependent Properties
WRC 503:2019 Compendium of Temperature-Dependent Physical Properties for Pressure Vessels, Piping and Tankage Materials
WRC 086:1963 Welding Of Steel At Low Ambient Temperatures
WRC 035:1957 The Tensile Properties of Selected Steels as a Function of Temperature
WRC 205:1975 Fracture Toughness and Related Characteristics of the Cryogenic Nickel Steels

GSO

GSO ISO 12278:2013 Aerospace -- Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature) / 235 degrees C, 1100 MPa (at ambient temperature) / 235 degrees C, 1250 MPa (at ambient temperature) / 235 degrees C a...
OS GSO ISO 12278:2013 Aerospace -- Nuts, barrel, self-locking, floating, self-aligning, with MJ threads, classifications: 900 MPa (at ambient temperature) / 235 degrees C, 1100 MPa (at ambient temperature) / 235 degrees C, 1250 MPa (at ambient temperature) / 235 degrees C a...
BH GSO ISO 3224:2016 Aerospace -- Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature )/235 degrees C, 1100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)...
GSO ISO 3224:2013 Aerospace -- Nuts, anchor, self-locking, floating, single lug, with counterbore, with MJ threads, classifications: 1100 MPa (at ambient temperature )/235 degrees C, 1100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)...
GSO ISO 12274:2013 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degr...
BH GSO ISO 12272:2016 Aerospace -- Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperatur...
GSO ISO 8940:2013 Aerospace -- Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/120 degrees C, 900 MPa (at ambient temperature)/175 degrees C and 900 MPa (at ambient temperature)...
GSO ISO 12277:2013 Aerospace -- Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1 100 MPa (at ambient temperature) / 120 degrees C, 1 100 MPa (at ambient temperature) / 235 degrees C and 1 100 MPa (at ambient temperature) / 425 d...
OS GSO ISO 12272:2013 Aerospace -- Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperatur...
BH GSO ISO 12274:2016 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, single lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degr...
BH GSO ISO 8940:2016 Aerospace -- Nuts, anchor, self-locking, sealing, floating, two-lug, with counterbore, with MJ threads, classifications: 900 MPa (at ambient temperature)/120 degrees C, 900 MPa (at ambient temperature)/175 degrees C and 900 MPa (at ambient temperature)...
BH GSO ISO 12277:2016 Aerospace -- Gang channel, self-locking, floating, standard series, with counterbore, classifications: 1 100 MPa (at ambient temperature) / 120 degrees C, 1 100 MPa (at ambient temperature) / 235 degrees C and 1 100 MPa (at ambient temperature) / 425 d...
GSO ISO 12272:2013 Aerospace -- Nuts, anchor, self-locking, floating, two lug, with incremental counterbore, with MJ threads classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperatur...
BH GSO ISO 12273:2016 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees...
GSO ISO 12273:2013 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees...
OS GSO ISO 12273:2013 Aerospace -- Nuts, anchor, self-locking, floating, self-aligning, two lug, with MJ threads, classifications: 900 MPa (at ambient temperature)/235 degrees C, 900 MPa (at ambient temperature)/315 degrees C and 900 MPa (at ambient temperature)/425 degrees...
GSO ISO 6925:2013 Textile floor coverings -- Burning behaviour -- Tablet test at ambient temperature
OS GSO ISO 3209:2015 Aerospace -- Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/...
GSO ISO 3209:2015 Aerospace -- Nuts, anchor, self-locking, floating, two lug, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature )/235 degrees C, 1 100 MPa (at ambient temperature )/315 degrees C and 1 100 MPa (at ambient temperature)/...
BH GSO ISO 7332:2016 Aerospace -- Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient...
OS GSO ISO 7332:2013 Aerospace -- Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient...
GSO ISO 7332:2013 Aerospace -- Nuts, anchor, self-locking, floating, two lug, reduced series, with counterbore, with MJ threads, classifications: 1 100 MPa (at ambient temperature)/235 degrees C, 1 100 MPa (at ambient temperature)/315 degrees C and 1 100 MPa (at ambient...
GSO IEC 60068-2-39:2021 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
BH GSO IEC 60068-2-39:2022 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
OS GSO ISO 6892:2007 Metallic Materials – Tensile Testing at Ambient Temperature
GSO ISO/TS 13732-2:2017 Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 2: Human contact with surfaces at moderate temperature
OS GSO ISO/TS 13732-2:2017 Ergonomics of the thermal environment -- Methods for the assessment of human responses to contact with surfaces -- Part 2: Human contact with surfaces at moderate temperature

SCC

BS ISO 9022-19:1994 Optics and optical instruments. Environmental test methods-Temperature cycles combined with sinusoidal or random vibration
AENOR UNE 53511:2001 Elastomers. Determination of the remaining deformation due to compression at constant deformation at ambient, high or low temperatures.
NS 3656:1993 Concrete testing - Rate of reaction as a function of temperature
VDI 2310 BLATT 12-2004 Maximum emission values for the protection of humans — Maximum emission concentrations for nitrogen dioxide
UNE 20325:1977 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES. METHOD OF TEST FOR IGNITION TEMPERATURE
UNE 20325/1C:1981 ELECTRICAL APPARATUS FOR EXPLOSIVE GAS ATMOSPHERES. METHOD OF TEST FOR IGNITION TEMPERATURE
DANSK DS/ISO 6925:1985 Textile floor coverings - Burning behavior - Tablet test at ambient temperature
BS 903-A42:1992 Physical testing of rubber-Method for determination of stress relaxation in compression at ambient and at elevated temperatures
UNE 53511:2001 Rubber, vulcanized or thermoplastic. Determination of compresion set at ambient, elevates or low temperatures.
BS PD ISO/TS 13732-2:2001 Ergonomics of the thermal environment. Methods for the assessment of human responses to contact with surfaces-Human contact with surfaces at moderate temperature
DIN 51563 E:2010 Draft Document - Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
CEI EN 60068-2-39:2017 Environmental testing Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
DANSK DS/EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
AENOR UNE 20327:1977 ELECTRICAL EQUIPMENT FOR EXPLOSIVE ATMOSPHERES. CLASSIFICATION OF MAXIMUM SURFACE TEMPERATURES
NEMA WD 50000-2023 High Ambient Temperature Test Procedure for Wiring Devices
IEC 60079-8:1969 Electrical apparatus for explosive gas atmospheres - Part 8: Classification of maximum surface temperatures
NS-ISO 4672:1988 Rubber and plastics hoses — Sub-ambient temperature flexibility tests
DANSK DS/EN 15922:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature
CEI 75-2:1997 Classificazione delle condizioni ambientali - Parte 2: Condizioni ambientali presenti in natura - Temperatura e umidità
AENOR UNE-EN 15922:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature
UNE-CEN/TS 15922:2010 EX Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature
NS-EN 15922:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature
SN-CEN/TS 15922:2009 Fertilizers — Extraction of soluble phosphorus according to Petermann at ambient temperature
BS ISO 3384:2005 Rubber, vulcanized or thermoplastic. Determination of stress relaxationi n compression at ambient and at elevated temperatures
DANSK DS/ISO 14097:2021 Greenhouse gas management and related activities – Framework including principles and requirements for assessing and reporting investments and financing activities related to climate change
AENOR UNE 85220 IN:1986 Criteria for choosing window characteristics related to their location and environmental aspects.
AENOR UNE 85220 ERTA:1987 Criteria for choosing window characteristics related to their location and environmental aspects.
IEC 60079-4:1966 Electrical apparatus for explosive gas atmospheres - Part 4: Method of test for ignition temperature
11/30255443 DC BS EN 60068-2-39. Environmental testing. Part 2-39. Tests and Guidance. Combined temperature or temperature and humidity with low air pressure tests
DIN IEC 60068-2-53:1986 Electrical engineering; basic environmental testing procedures; guidance to tests Z/AFc and Z/BFc: combined temperature (cold and dry heat) and vibration (sinusoidal) tests; identical with IEC 60068-2-53, edition 1984

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE AT-01-1-4-2001 Radiant Panel Surface Temperature Over a Range of Ambient Temperatures
ASHRAE OR-94-14-1994 Thermal Comfort in Warm Environments
ASHRAE LO-09-070-2009 Functional Exergy Efficiency at Near-Environmental Temperatures

European Committee for Standardization (CEN)

EN 13485:2023 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability
DD ENV 12788-1998 Advanced Technical Ceramics - Mechanical Properties of Ceramic Composites at High Temperature under Inert Atmosphere - Determination of Flexural Strength
EN 13486:2023 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification
FprEN 16214-3 Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 3: Sustainability criteria related to environmental aspects
HD 478.2.1 S1-1989 Classification of environmental conditions; part 2: environmental conditions appearing in nature; temperature and humidity
EN 843-1:1995 Advanced Technical Ceramics - Monolithic Ceramics - Mechanical Properties at Room Temperature Part 1: Determination of Flexural Strength
EN 843-1:2006 Advanced technical ceramics - Mechanical properties of monolithic ceramics at room temperature - Part 1: Determination of flexural strength
EN 24672:1993 Rubber and plastics hoses; sub-ambiant temperature flexibility tests (ISO 4672:1988)

BR-ABNT

ABNT MB-72-1972 Mb-72. Ambient temperature elasticity detection

German Institute for Standardization

DIN EN 13485:2022-08 Thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Tests, performance, suitability; German and English version prEN 13485:2022 / Note: Date of issue 2022-07-15*Int...
DIN EN 13486:2022-08 Temperature recorders and thermometers for measuring the ambient or internal temperature for the transport, storage and distribution of temperature sensitive goods - Periodic verification; German and English version prEN 13486:2022 / Note: Date of issu...
DIN EN 16214-3:2022-08 Sustainability and greenhouse gas emission saving criteria for biomass for energy applications - Principles, criteria, indicators and verifiers - Part 3: Sustainability criteria related to environmental aspects; German and English version prEN 16214-3:...
DIN 51563:2011-04 Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
DIN ISO 815:2000 Rubber, vulcanized or thermoplastic - Determination of compression set at ambient, elevated or low temperatures (ISO 815:1991 + ISO 815:1991/Cor.1:1993)
DIN 51563:1976 Testing of Mineral Oils and Related Materials; Determination of Viscosity Temperature Relation; Slope m
DIN 51563:2011 Testing of Mineral Oils and Related Materials - Determination of Viscosity Temperature Relation - Slope m
DIN EN 15922:2011-08 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature; German version EN 15922:2011

American Society for Testing and Materials (ASTM)

ASTM E344-06 Terminology Relating to Thermometry and Hydrometry
ASTM C634-02 Standard Terminology Relating to Environmental Acoustics
ASTM C634-02e1 Standard Terminology Relating to Building and Environmental Acoustics
ASTM E943-00a Standard Terminology Relating to Biological Effects and Environmental Fate
ASTM E943-04 Standard Terminology Relating to Biological Effects and Environmental Fate
ASTM E943-23 Standard Terminology Relating to Biological Effects and Environmental Fate
ASTM E943-04a Standard Terminology Relating to Biological Effects and Environmental Fate
ASTM E943-08 Standard Terminology Relating to Biological Effects and Environmental Fate
ASTM D5133-05(2011) Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM D5133-12 Standard Test Method for Low Temperature, Low Shear Rate, Viscosity/Temperature Dependence of Lubricating Oils Using a Temperature-Scanning Technique
ASTM E825-98(2023) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E825-98(2016) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E344-07 Terminology Relating to Thermometry and Hydrometry
ASTM E344-19e1 Terminology Relating to Thermometry and Hydrometry
ASTM E344-08 Terminology Relating to Thermometry and Hydrometry
ASTM E344-02 Terminology Relating to Thermometry and Hydrometry
ASTM E344-19 Terminology Relating to Thermometry and Hydrometry
ASTM E825-98 Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E825-98(2003) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM E344-00 Terminology Relating to Thermometry and Hydrometry
ASTM E344-18 Terminology Relating to Thermometry and Hydrometry
ASTM E344-20 Terminology Relating to Thermometry and Hydrometry
ASTM E344-10 Terminology Relating to Thermometry and Hydrometry
ASTM E344-16 Terminology Relating to Thermometry and Hydrometry
ASTM E825-98(2009) Standard Specification for Phase Change-Type Disposable Fever Thermometer for Intermittent Determination of Human Temperature
ASTM G72/G72M-24 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM D7110-05a(2011) Standard Test Method for Determining the Viscosity-Temperature Relationship of Used and Soot-Containing Engine Oils at Low Temperatures
ASTM G72/G72M-15 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment
ASTM G72/G72M-09 Standard Test Method for Autogenous Ignition Temperature of Liquids and Solids in a High-Pressure Oxygen-Enriched Environment

CZ-CSN

CSN 03 8900 Cast.2-1-1988 Classification of environmental conditions. Environmental conditions appearing in nature. Part 2—1 Temperature and humidity

KR-KS

KS W ISO 8940-2020 Aerospace — Nuts, anchor, self-locking, sealing, floating, two-lug,with counterbore, with MJ threads, classifications:900 MPa (at ambient temperature)/120 °C,900 MPa (at ambient temperature)/175 °C an
KS C IEC 60068-2-39-2018(2023) Environmental testing — Part 2-39: Tests — Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
KS B 6614-2023 Performance test method for automatic temperature control system for heating included environmental sensor
KS W ISO 9156-2020 Aerospace — Nuts, anchor, self-locking, fixed, 90° corner, reduced series, with counterbore, with MJ threads, classifications:1 100 MPa (at ambient temperature)/235 °C,1 100 MPa (at ambient temperatur
KS M ISO 4672-2008 Rubber and plastics hoses－Sub-ambient temperature flexibility tests

RU-GOST R

GOST R 53615-2009 The influence of environmental conditions appearing in nature on the technical products. Overall performance. Solar radiation and temperature

IN-BIS

IS 2627-1979 Glossary of terms related to liquid-in-glass thermometers
IS 9676-1980 Reference ambient temperature for electrical equipment
IS 12657-1989 Rubber and Plastic Hoses—Flexibility Testing at Subambient Temperatures

NO-SN

NS 3656-1993 Concrete testing. Rate of reaction as a function o temperature

Indonesia Standards

SNI 16-7061-2004 The measurement of work climates (hot) by wet bulb globe temperature index parameters

PT-IPQ

NP 93-1956 Essential oils. Relevant freezing temperatures

Natural Gas Processor's Association (NGPA)

GPA RR-47-1981 Behavior of CH4-CO2-H2S Mixtures at Sub-Ambient Temperatures
GPA TP-8-1982 Solubility of Carbon Dioxide in Propylene Carbonate at Elevated Pressures & Higher Than Ambient Temperatures

International Electrotechnical Commission (IEC)

IEC 60721-2-1:2013 Classification of environmental conditions - Part 2-1: Environmental conditions appearing in nature - Temperature and humidity
IEC 60079-4:1975 Electrical apparatus for explosive gas atmospheres. Part 4 : Method of test for ignition temperature

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 55-1953 Guide for Temperature Correlation in the Connection of Insulated Wire and Cables to Electronic Equipment

(U.S.) Ford Automotive Standards

FORD M5B274-A-1991 CLEANER - SPRAY ALKALINE LIQUID NONFOAMING AMBIENT TEMP
FORD M5B382-A-1989 CLEANER ALKALINE SPRAY AMBIENT TEMPERATURE
FORD M5B324-A-1985 CLEANER ALKALINE SPRAY AMBIENT TEMPERATURE
FORD M5B404-A-1995 CLEANER, ALKALINE, AMBIENT TEMPERATURE

Society of Automotive Engineers (SAE)

SAE AS210-2014 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
SAE AS210-2023 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
SAE AS210-2018 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
SAE ARP210-2011 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)
SAE ARP5623-2013 Mobile Digital Infrared Pavement Surface, Ambient Air and Dew Point Temperature Sensor System

American National Standards Institute （ANSI)

ANSI B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement
ANSI/ASTM E1171:2002 Test Method for Photovoltaic Modules in Cyclic Temperature and Humidity Environments
ANSI T1.304-1997 Telecommunications - Ambient temperature and humidity requirements for network equipment in controlled environments
ANSI/ASTM D7779:2011 Test Method for Determination of Fracture Toughness of Graphite at Ambient Temperature

Japanese Industrial Standards Committee (JISC)

JIS Z 8725:1987 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
JIS Z 8725:2015 Methods for determining distribution temperature and colour temperature or correlated colour temperature of light sources
JIS Z 8725:1999 Methods for determining distribution temperature and color temperature or correlated color temperature of light sources
JIS B 9920-2:2019 Cleanrooms and associated controlled environments -- Part 2: Monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
JIS C 60068-2-39:2019 Environmental testing -- Part 2-39: Tests -- Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
JIS C 0111:1995 Classification of environmental conditions Part 2: Environmental conditions appearing in nature Temperature and humidity
JIS C 60721-2-1:1995 Classification of environmental conditions Part 2: Environmental conditions appearing in nature Temperature and humidity

American Society of Mechanical Engineers (ASME)

ASME B89.6.2-1973 Temperature and Humidity Environment for Dimensional Measurement

Association Francaise de Normalisation

NF B30-010:1967 Glass. Vocabulary of characteristic temperatures related to glass viscosities.
NF C86-818/A1:1981 Rectifier diodes at specified ambient temperature
NF X44-101-2*NF EN ISO 14644-2:2016 Cleanrooms and associated controlled environments - Part 2 : monitoring to provide evidence of cleanroom performance related to air cleanliness by particle concentration
NF G07-128:1978 Textiles - Fire behavior - Determination of the oxygen index at room temperature
NF C20-700-2-39*NF EN 60068-2-39:2016 Environmental testing - Part 2-39 : tests - Tests and guidance : combined temperature or temperature and humidity with low air pressure tests
NF X30-097*NF ISO 14097:2021 Greenhouse gas management and related activities - Framework including principles and requirements for assessing and reporting investments and financing activities related to climate change

SAE - SAE International

SAE ARP210A-2014 Definition of Commonly Used Day Types (Atmospheric Ambient Temperature Characteristics Versus Pressure Altitude)

Standard Association of Australia （SAA）

AS/NZS 60079.4:2000 Electrical apparatus for explosive gas atmospheres - Method of test for ignition temperature
AS 1391:2007/Amdt 1:2012 Tensile test of metallic materials at ambient temperature

RO-ASRO

STAS 6877/9-1976 ELECTRICAL EQUIPMENTS FOR EXPLOSIVE ATMOSPHERES Determination of ignition tcmperature of gases and. vapours
STAS 5118/14-1975 Packages DETERMINATION OF THE INFLUENCE OF HIGH AND LOW TEMPERATURES UPON PHYSICAL AND, MECHANICAL STRENGTHS

ECMA - European Association for Standardizing Information and Communication Systems

TR 70-1997 Product-Related Environmental Attributes

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 2889-2021 IEEE Guide for the Definition of Incident Power Density to Correlate Surface Temperature Elevation
IEEE 2889-2021 IEEE Guide for the Definition of Incident Power Density to Correlate Surface Temperature Elevation
IEEE Std 55-1953 IEEE Guide for Temperature Correlation in the Connection of Insulated Wire and Cables to Electronic Equipment
IEEE P2889/D0.05, August 2021 IEEE Approved Draft Guide for the Definition of Incident Power Density to Correlate Surface Temperature Elevation

IPC - Association Connecting Electronics Industries

IPC TM-650 2.4.4B-1994 Flexural Strength of Laminates (at Ambient Temperature)

WRC - Welding Research Council

BULLETIN 35-1957 THE TENSILE PROPERTIES OF SELECTED STEELS AS A FUNCTION OF TEMPERATURE
BULLETIN 205-1975 FRACTURE TOUGHNESS AND RELATED CHARACTERISTICS OF THE CRYOGENIC NICKEL STEELS

ATIS - Alliance for Telecommunications Industry Solutions

T1.304-1997 Telecommunications - Ambient Temperature and Humidity Requirements for Network Equipment in Controlled Environments

DIN

DIN ISO 9022-19:2001 Optics and optical instruments - Environmental test methods - Part 19: Temperature cycles combined with sinusoidal or random vibration (ISO 9022-19:1994)

International Telecommunication Union (ITU)

ITU-R QUESTION 2241-2001 Technical convergence with respect to terrestrial fixed, mobile, and broadcasting interactive multimedia applications and the associated regulatory environment

ES-UNE

UNE-EN ISO 14505-2:2007/AC:2009 Ergonomics of the thermal environment - Evaluation of thermal environments in vehicles - Part 2: Determination of equivalent temperature (ISO 14505-2:2006/Cor 1:2007)
UNE-EN 60068-2-39:2016 Environmental testing - Part 2-39: Tests - Tests and guidance: Combined temperature or temperature and humidity with low air pressure tests
UNE-EN 14870-1:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature
UNE-EN ISO 9241-420:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature

Danish Standards Foundation

DS/EN 24672:1993 Rubber and plastics hoses. Sub-ambient temperature flexibility tests
DS/EN 15922:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature
DS/ISO 3384:1989 Rubber, vulcanized. Determination of stress relaxation in compression at ambient and at elevated temperatures
DS/ISO 14097:2021 Greenhouse gas management and related activities – Framework including principles and requirements for assessing and reporting investments and financing activities related to climate change

YU-JUS

JUS G.S3.104-1991 Rubber and plastics hoses. Sub-ambient temperature flexibility tests

SE-SIS

SIS SS 11 23 24-1981 Metallic materials — Relaxation testing at ambient temperature

AENOR

UNE-EN 15922:2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature
UNE 40462:1983 TEXTILE FLOOR COVERINGS. BURNING BEHAVIOUR. TABLET TES AT AMBIENT TEMPERATURE

Lithuanian Standards Office

LST EN 15922-2011 Fertilizers - Extraction of soluble phosphorus according to Petermann at ambient temperature

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 5.5.4.5 Test Coupon C - Circuit Continuity, Temperature Cycling, Thermal Cycling, and Construction Integrity

US-CFR-file

CFR 40-600.116-12-2014 Protection of Environment. Part600:Fuel economy and greenhouse gas exhaust emissions of motor vehicles. Section600.116-12:Special procedures related to electric vehicles and hybrid electric vehicles.

API - American Petroleum Institute

API 32-32656- Cancerous Diseases in Aquatic Animals and Their Association With Environmental Pollutants: A Critical Review of the Literature

ZA-SANS

SANS 60079-4:1975 Electrical apparatus for explosive gas atmospheres Part 4: Method of test for ignition temperature

Others: