Gyro accuracy mm

Gyro accuracy mm, Total:109 items.

The international standard classification for "Gyro accuracy mm" includes: On-board equipment and instruments .

The Chinese standard classification for "Gyro accuracy mm" includes: Spacecraft control and guidance system .

Professional Standard - Aerospace

QJ 2318-1992 Gyro accelerometer test method
QJ 1079-1986 Gyroscope main accuracy index and test method
QJ 1079A-2004 Major precision parameters and testing methods for gyroscopes

未注明发布机构

SAE AS396B-2001 Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)

National Metrological Verification Regulations of the People's Republic of China

JJG(电子) 09007-1989 Eight mm precision rotary attenuator verification regulations

Military Standard of the People's Republic of China-General Armament Department

GJB 765-1989 Tungsten-based high-density alloy ring blank for gyro rotor

SCC

NS 486:1944 Conversion tables — Millimeters to US and English inches with 6 decimal places from 0.0001 mm to 1000 mm
ASD-STAN prEN 6025:1970 Plates - Aluminium alloy 2024 - Close-tolerance flatness - Thickness 6 mm < a <or= 55 mm - Dimensions
ASD-STAN PREN 3504:2010 Aerospace series Titanium and titanium alloys Circular tubes for fluids Close tolerances Diameter 3,2 mm ≤ D ≤ 50 mm Thickness 0,25 mm ≤ a ≤ 2 mm Dimensions
UNE 82316:1994 VERNIER CALLIPERS READING TO 0,1 MM AND 0,05 MM.
NS 1819:1969 Wing nuts — M 2,5 mm to M 24 mm
BS 6322-2:1982 Tolerances for fasteners-Specification for tolerances of bolts, screws and nuts with thread diameters from 1 mm up to 3 mm and product grade F, for fine mechanics
AENOR UNE 17054-2:1976 CALLED HEXAGONAL NUTS WITH METRIC THREAD. NOMINAL DIAMETERS FROM 42 TO 100 MM
AENOR UNE 17054-1:1976 CALLED HEXAGONAL NUTS WITH METRIC THREAD. NOMINAL DIAMETERS FROM 4 TO 39 MM
BS MA 74-1:1976 Tapers and other outboard details of propeller shafts-Specification for shafts of diameter from 16 mm to 160 mm
UNE 82317:1994 VERNIER CALLIPERS READING TO 0,002 MM.
ASD-STAN prEN 2033:1970 Strips, cold rolled in steel - Thickness 0,1 mm <or= a <or= 2,5 mm - Dimensions
BS 1888:1972 Specification for precision reels for bare and oxidized resistance wires (0.010 mm to 0.125 mm diameter inclusive)
NS-EN 3842:2001 Aerospace series — Circular tubes for fluids in corrosion resistant steel — Diameter 3,2 mm < = D < = 100 mm — Thickness 0,32 mm < = a < = 2,5 mm — Dimensions
NS-EN 2257:1997 Aerospace series — Circular tubes for structures in aluminium and aluminium alloys — Diameter 6 mm <= D <= 100 mm — Thickness 1 mm <= a <= 6 mm — Dimensions
NS 485:1944 Conversion Tables — US and English inches to millimeters to 5 decimal places from 0.0001" to 100"
BS 4656-31:1982 Accuracy of machine tools and methods of test-Specification for capstan, turret and automatic lathes, single spindle type greater than 25 mm diameter capacity
BS 3531-5:1982 Surgical implants-Specification for surgical bone screws of 4 mm, 3.5 mm and 3 mm nominal sizes, countersunk surfaces on bone plates, twist drills, taps and screwdrivers
AS 1110:1984 ISO metric hexagon precision bolts and screws
AS 1110:1980 ISO metric hexagon precision bolts and screws
DANSK DS/EN 3842:2001 Aerospace series - Circular tubes for fluids in corrosion resistant steel - Diameter 3,2 mm < D < 100 mm - Thickness 0,32 mm < a < 2,5 mm - Dimensions
DANSK DS/EN 2258:1997 Aerospace series - Circular tubes for fluids in aluminium and aluminium alloys - Diameter 3,2 mm >= D >= 100 mm - Thickness 0,6 mm >= a >= 2,5 mm - Dimensions

PL-PKN

PN M55701-1956 Machines tools -- Twist drill grinding machines with diameter above 10 mm -- Testing of accuracy
PN M54701-1959 Fine mechanics -- Taper pins with taper 1:20 with diameters from 0,25 mm to 2 mm
PN M55651-1967 Metal cutting machinetools Centr? lathes with swing over ted op to 315 mm Accuracy testing
PN M69225-1960 Gas cylinders. Whitwor?h ?hread o? 80 mm diameter
PN M55688-1964 Machin? - tools Gear hobbing machines with table diameter from 100 up to 1000 mm Testing of accuracy

CZ-CSN

CSN ON 28 0131-1963 High-precision automobile chassis. Wheelbase 1435 mm
CSN 28 0130-1956 Accuracy of truck bed with 1435 mm pitch
CSN 20 0347-1959 Surface grinder accuracy. Longitudinal width clamping area up to 630 mm
CSN ISO 4759-2:1995 Fasteners.Tolerances for fasteners.Part 2:Bolts,screws and nuts with thread diameters from 1 up to 3 mm and product grade F,for fine mechanics
CSN 20 0304-1955 Vertical lathe tool holder accuracy (material diameter up to 63 mm)
CSN 20 0346-1959 High-precision surface grinder. Lateral width clamping surface/to 315 mm
CSN 20 0305-1956 Cross head lathe tool holder accuracy (material diameter up to 63 mm)
CSN 19 8022-1995 film art. Sheath specifications and positions for film widths 70mm, 65mm, 35mm and 16mm
CSN 25 4120-1954 Thread gauges. Limit screw ring gauges for go-side, diamater 1 up to 100 mm. Metric thread

German Institute for Standardization

DIN 18723-7:1990-07 Field procedure for precision testing of surveying instruments; gyroscopes
DIN 18723-7:1990 Field procedure for precision testing of surveying instruments; gyroscopes
DIN 8605:1976-06 Machine Tools; Lathes of High Accuracy Swing up to 500 mm, Turning Length up to 1500 mm, Acceptance Conditions
DIN 13-2:1999-11 ISO general purpose metric screw threads - Part 2: Nominal sizes for 0,2 mm, 0,25 mm and 0,35 mm fine pitch threads; nominal diameter from 1 mm to 50 mm
DIN 8606:1976-06 Machine Tools; Lathes of Normal Accuracy; Swing up to 800 mm; Acceptance Conditions
DIN 13-5:1999-11 ISO general purpose metric screw threads - Part 5: Nominal sizes for 1 mm and 1,25 mm fine pitch threads; nominal diameter from 7,5 mm to 200 mm
DIN 8607:1976-06 Machine Tools; Lathes of Normal Accuracy, Swing above 800 up to 1600 mm; Acceptance Conditions

RO-ASRO

STAS 3202-1952 Precision square turnbuckle. Diameter from 10 to 300 mm
STAS 4677-1980 Non adjustable gauges for externai parallel thread SCREW RING GAUGES FOR MET- RIC THREAD WITHIN THE RANGE 1 mm, TO 100 mm DIAMETER Dimensions
STAS 10463/2-1985 ISO trapezoidal screw threads SOLID AND REFERENCE PLUG GAUGES FOR SCREW THREADS WITH DIAMETERS BETWEEN 8... 120 mm Dimensions
SR ISO 4759-3/C1:1996 Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts with nominal thread diameters from 1 mm up to and including 150 mm - Product grades A and C
STAS 4136/1-1980 SCREW PLUG GAUGES AND REFEREKCE GAUGES FOR METRIC SCREW THREADS FROM 1 TO 30 mm DIAMETERS Dimensions
STAS 4136/2-1980 SCREW PLUG GAUGES AND REFERENCE GAUGES FOR METRIC SCREW THREADS FROM 32 TO 100 mm DIAMETERS Dimensions

HU-MSZT

MNOSZ 4960-1951 Foreign steel plate size series table millimeter accuracy
MSZ 6568-1960 52-100 mm graduated thread measurer
MNOSZ 4958-1951 Foreign metal wire measurement products. mm measurement accuracy
MNOSZ 6101-1951 Large metal cutting machinery. Lathe Accuracy Standard (Dimension D
MSZ 6566-1960 30-52 mm single-sided, scale-protected, spiral-set measuring instrument
MNOSZ 6659-1951 Gold-plated double-sided screw gauge, 30.50 mm

AT-ON

ONORM M 9015-1996 Machine tools - Acceptance conditions for lathes of high accuracy - Swing up to 500 mm, turning length up to 1500 mm
ONORM M 9017-1996 Machine tools - Acceptance conditions for lathes of normal accuracy - Swing above 800 mm up to 1600 mm
ONORM M 1504-1974 ISO-metric screw thread; fine series with 0,2 mm and 0,25 mm pitch; nominal dimensions
ONORM M 9016-1996 Machine tools - Acceptance conditions for lathes of normal accuracy - Swing up to 800 mm
ONORM M 1501-1997 ISO metric screw thread - Coarse pitch threads and fine pitch threads - Nominal diameter from 1 mm to 1000 mm - Basic profil and nominal sizes
ONORM M 1505-1974 ISO metric screw thread; fine series with 0,35 mm pitch; nominal dimensions

IN-BIS

IS 1364-1967 Specification for precision and semi-precision hexagonal bolts, screws, nuts and lock nuts (diameter range 6 to 39 mm)

U.S. Air Force

AIR FORCE MIL-G-83824 NOTICE 1-1997 GYROSCOPE, RATE, TYPE I, TYPE II, AND TYPE III
AIR FORCE MIL-G-83824-1991 GYROSCOPE, RATE, TYPE I, TYPE II, AND TYPE III
AIR FORCE MIL-G-25591 E NOTICE 1-1996 GYROSCOPE, RATE, SWITCHING, TYPE MC-1
AIR FORCE MIL-T-27200 C-1975 TRANSMITTER, RATE GYROSCOPE TRU-2A/A
AIR FORCE MIL-T-27200 C (4)-1987 TRANSMITTER, RATE GYROSCOPE TRU-2A/A
AIR FORCE MIL-T-27200 C NOTICE 1-1996 TRANSMITTER, RATE GYROSCOPE TRU-2A/A
AIR FORCE MIL-T-27200 C VALID NOTICE 2-2008 TRANSMITTER, RATE GYROSCOPE TRU-2A/A

American Society of Mechanical Engineers (ASME)

ASME B89.1.9M-1984 Precision gage blocks for length measurement (through 20 in. and 500 mm)

Society of Automotive Engineers (SAE)

SAE AS396B-1958 Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)
SAE AS396B-2008 Bank and Pitch Instruments (Indicating Stabilized Type) (Gyroscopic Horizon, Attitude Gyro)
SAE AS1104-2008 Single-Degree-of-Freedom Spring-Restrained Rate Gyros
SAE AS1104-1969 Single-Degree-of-Freedom Spring-Restrained Rate Gyros

American National Standards Institute （ANSI)

ANSI/ASME B89.1.9-2002 Precision Gage Blocks for Length Measurement (through 20 Inches and 500 Millimeters)
ANSI/IEEE 292:1969 Specification Format for Single-Degree-of-Freedom Spring-Restrained Rate Gyros

YU-JUS

JUS K.T3.178-1985 GO screvv plug gauges for iSO.Metric Screvv Threads above 40 to and including 100 mm nominal dia- meter
JUS K.T3.179-1985 NOT GO screvv plug gauges for ISO Metric Screw Threads above 40 to and including 100mm nominal diameter
JUS K.T3.177-1985 NOT GO screw gauging members for ISO Metric Screw Threads above 40 to and including 100mm no- minal diameter
JUS K.T3.175-1985 NOT GO screw plug gauges for ISO Metric Screvv Threads from 1 to and including 50 mm nominal diameter
JUS K.T3.182-1985 NO TGO screvv ring gauges for ISO Metric Screw Threads from 1 to 100 mm nominal diameter
JUS M.B0.272-1977 ISO Metric trapezoidal internat screw threads from 105 to 300 mm diameter; limits
JUS M.B0.273-1977 ISO Metric trapezoidal external screw threadsfrom 8 to 100 mm diameter; limits
JUS K.T3.151-1983 Fiat plug gauges GO above 200 to and including 360 mm nominal diameter
JUS K.T3.130-1983 GO gauging members for holes over 40 up to and inckiding 120 mm nominal diameter
JUS K.T2.051-1980 One-side vernier callipers reading to 0,1 and 0,05 mm
JUS K.T2.052-1980 Two-si?e vernier callipen reading to 0,1 and 0,05 mm

Standard Association of Australia （SAA）

AS 1597.2:2013 Precast reinforced concrete box culverts Large culverts (span exceeding 1200 mm or height exceeding 1200 mm up to and including span 4200 mm and height 4200 mm)

ZA-SANS

SANS 1700-4-2:1996 Fasteners Part 4: Tolerances Section 2: Bolts, screws and nuts with thread diameters from 1 up to 3 mm and product grade F for fine mechanics

Malaysia Standards

MS 862-1983 Specification for threaded types of welded and seamless steel pipe (6 mm to 150 mm)

SE-SIS

SIS SMS 795-1963 Spiral tool, 6 edges, key widened to the extent of millimeter
SIS SMS 875-1963 Spiral tool, 6 edges, key widened to the extent of millimeter
SIS SMS 397-1932 Inches to millimeters conversion table. Exact value from 0.0001' to 10'
SIS SS-ISO 9404-1:1992 Enclosures for protection against ionizing radiation — Lead shielding units for 150 mm,200 mm and 250 mm thick walls — Part 1: Chevron units of 150 mm and200 mm thickness

AENOR

UNE 25200:1971 SELECTIVE LIST OF ALUMINIUM TUBES. EXTERNAL DIAMETERS OF 10-16 MM, 1-3 MM THICKNESS.
UNE 25199:1970 SELECTIVE LIST OF COPPER TUBES. EXTERNAL DIAMETERS OF 4-80 MM, 1-3 MM THICKNESS.

ES-UNE

UNE-EN 3146:2001 Aerospace series- Round bars, hot rolled in steel - Close tolerances - Diameter 6 mm <= D <= 250 mm - Dimensions. (Endorsed by AENOR in December of 2001.)
UNE-EN 17177:2019 Glass packaging - Crown cap - 26 mm diameter, 6 mm height crown cap.

Institute of Electrical and Electronics Engineers (IEEE)

SMPTE ST 76:1996 ST 76:1996 - SMPTE Standard - Motion-Picture Cameras — 16-mm and 8-mm Threaded Lens Mounts

British Standards Institution (BSI)

BS EN 17177:2019 Glass packaging. Crown cap. 26 mm diameter, 6 mm height crown cap

ES-AENOR

UNE 25 200 Copper pipes are available with outer diameters ranging from 4 to 80 mm and thicknesses from 1 to 3 mm.

DIN

DIN 89-2:1922 Bare hexagon nuts from 56 to 149 mm; Metric thread

Association Francaise de Normalisation

NF L66-561:1965 Photographic papers in rolls of 125 mm and 238 mm width (e.g. NF L 78-561)
NF L12-175*NF EN 2033:2017 Aerospace series - Strips, cold rolled in steel, Thickness 0,1 mm = a = 2,5 mm - Dimensions

Others: Gyroscope main accuracy index and test method,Gyroscope Accuracy,Gyroscope Accuracy Index