BICSI standard download

BICSI standard download, Total:160 items.

The international standard classification for "BICSI standard download" includes: Water quality , Sewage water .

The Chinese standard classification for "BICSI standard download" includes: Environmental Quality Standard for atmosphere, water and soil .

未注明发布机构

IEEE Std C37.74-2014 Standard requirements for underground, basement and base-mounted load interrupting switchgear and fused load interrupting switchgear for AC systems of 38kv and below

Professional Standard - Construction Industry

JGJ/T 135-2018 Technical standard for piles with ram-compacted bearing sphere

Qinghai Provincial Standard of the People's Republic of China

DB63/T 2030-2022 Quinoa observation record standard

Anhui Provincial Standard of the People's Republic of China

DB34/T 3464-2019 Urban bridge load limit standard

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 14848-2017 Standard for groundwater quality

中华人民共和国环境保护部

GB/T 14848-1993 Quality standard for ground water

Gansu Provincial Standard of the People's Republic of China

DB62/T 413-2002 Lanzhou lily record standard

Professional Standard - Geology

DZ/T 0290-2015 Standard for groundwater quality

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 51228-2017 Standard for vibration load of buildings

NATO - North Atlantic Treaty Organization

STANAG 2445-2011 CRITERIA FOR THE CLEARANCE OF HELICOPTER UNDERSLUNG LOAD EQUIPMENT (HUSLE) AND UNDERSLUNG LOADS (USLs) (ED 4; To obtain please contact your national Defense Standardization Office or the NATO Standardization Office website: http:/ so.nato.int so@ Phone: +

International Organization for Standardization (ISO)

ISO/IEC GUIDE 76:2008 Development of service standards - Recommendations for addressing consumer issues
ISO 17281:2018 Plastics - Determination of fracture toughness (GIC and KIC) at moderately high loading rates (1 m/s)
ISO 17281:2002 Plastics - Determination of fracture toughness (G<(Index)IC> and K<(Index)IC>) at moderately high loading rates (1 m/s)

CU-NC

NC 96-00-11-1989 Fire Protection Standards System. Fuel Load. Methodology for Its Determination

Korean Agency for Technology and Standards (KATS)

KS F 2445-2016 Standard method of testing piles under axial compressive load
KS F 2445-1982 Standard method of testing piles under axial compressive load
KS F 2445-2016(2021) Standard method of testing piles under axial compressive load
KS F 2439-1984 Standard method of testing piles under vertical axial compressive load
KS T 2014-2009 Load standards of palletized cargo
KS T 2014-2015 Load standards of palletized cargo
KS M ISO 17281:2007 Plastics－Determination of fracture toughness (GIC and KIC) at moderately high loading rates(1 m/s)
KS G ISO 7797-2019 Cross-country skis－Determination of breakingload and deflection at break with quasistatic load
KS G ISO 7797-2004(2019) Cross-country skis－Determination of breakingload and deflection at break with quasistatic load
KS F ISO 9883-2001(2021) Performance standards in building－Performance test for precast concrete floors－Behaviour under concentrated load
KS F ISO 9883-2021 Performance standards in building－Performance test for precast concrete floors－Behaviour under concentrated load
KS A 1632-1994 Load standards of palletized carge
KS F ISO 9882-2001(2016) Performance standards in building－Performance test for precast concrete floors－Behaviour under non-concentrated load

American Society for Testing and Materials (ASTM)

ASTM D1143-81(1987)e1 Standard Test Method for Piles Under Static Axial Compressive Load
ASTM D4577-05(2010) Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4577-05(2018) Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4577-00 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM C1367-19 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM D4577-05 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4577-19 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM C16-81(1996)e1 Standard Test Method for Load Testing Refractory Brick at High Temperatures
ASTM D4577-19(2023) Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM C1367-19(2023) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM D4577-00(2003) Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D4577-00(2003)e1 Standard Test Method for Compression Resistance of a Container Under Constant Load
ASTM D5276-98(2017) Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM F1971-12 Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
ASTM F3568-23 Standard Guide for Medical Qualifications for Suborbital Vehicle Passengers
ASTM D3966-90(1995) Standard Test Method for Piles Under Lateral Loads (Withdrawn 2005)
ASTM D5493-93(2003) Standard Test Method for Permittivity of Geotextiles Under Load
ASTM F1971-12(2018) Standard Test Method for Electrical Resistance of Tires Under Load On the Test Bench
ASTM D5276-98(2004) Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM C655-15 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
ASTM D5276-98 Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM C1367-06 Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM D648-16 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM D1143/D1143M-07(2013) Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D1143/D1143M-07e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D3689-07 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
ASTM D648-06 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C1367-06(2012) Standard Test Method for Dead Load Resistance of a Sealant in Elevated Temperatures
ASTM D3689/D3689M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Tensile Load
ASTM D1143/D1143M-07(2013)e1 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM E1012-99 Standard Practice for Verification of Specimen Alignment Under Tensile Loading
ASTM C507-15 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe
ASTM D5493-06 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D5276-98(2009) Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM D5493-23 Standard Test Method for Permittivity of Geotextiles Under Load
ASTM C655M-15 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM D1143/D1143M-20e1 Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load
ASTM F2912-11 Standard Specification for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM D4694-09(2020) Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM D1143-81(1994)e1 Standard Test Method for Piles Under Static Axial Compressive Load (Withdrawn 2006)
ASTM D4694-96 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM D3966/D3966M-22 Standard Test Methods for Deep Foundation Elements Under Static Lateral Load
ASTM D4694-09 Standard Test Method for Deflections with a Falling-Weight-Type Impulse Load Device
ASTM C507M-15 Standard Specification for Reinforced Concrete Elliptical Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM D8510/D8510M-23 Standard Test Method for Local Buckling and Crippling under Axial Compressive Loading
ASTM D5493-06(2016) Standard Test Method for Permittivity of Geotextiles Under Load
ASTM D3689/D3689M-22 Standard Test Methods for Deep Foundation Elements Under Static Axial Tensile Load
ASTM D1143/D1143M-07 Standard Test Methods for Deep Foundations Under Static Axial Compressive Load
ASTM D1143/D1143M-20 Standard Test Methods for Deep Foundation Elements Under Static Axial Compressive Load
ASTM C832-00(2015) Standard Test Method of Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM C832-21 Standard Test Method for Measuring Thermal Expansion and Creep of Refractories Under Load
ASTM D816-06(2016) Standard Test Methods for Rubber Cements
ASTM D3689-90(1995) Standard Test Method for Individual Piles Under Static Axial Tensile Load (Withdrawn 2005)
ASTM D8169/D8169M-18 Standard Test Methods for Deep Foundations Under Bi-Directional Static Axial Compressive Load
ASTM D648-18 Standard Test Method for Deflection Temperature of Plastics Under Flexural Load in the Edgewise Position
ASTM C655M-18 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM D7452-09 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM E997-15(2021) Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
ASTM C655M-19a Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C1367-97 Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear
ASTM C655M-19 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe (Metric)
ASTM C1367-01 Standard Test Method for Heat Resistance of Hot-Applied Sealants Under Dead Load Shear
ASTM C857-19 Standard Practice for Minimum Structural Design Loading for Underground Precast Concrete Utility Structures
ASTM D5780-18 Standard Test Methods for Individual Piles in Permafrost Under Static Axial Compressive Load
ASTM E661-22 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
ASTM D7452-24 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM D7452-17 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM D7452-19e1 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM E661-88(1997) Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
ASTM D7452-08 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM D7452-19 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM F1642-96 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM D5276-19 Standard Test Method for Drop Test of Loaded Containers by Free Fall
ASTM F1642-04 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM F1642-03 Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM F1642-04(2010) Standard Test Method for Glazing and Glazing Systems Subject to Airblast Loadings
ASTM D5780-95(2002) Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
ASTM D6121-12a Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM D5780-95 Standard Test Method for Individual Piles in Permafrost Under Static Axial Compressive Load
ASTM D7452-22 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM D7452-09a Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM D7452-16 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM C655-19a Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
ASTM D2339-20 Standard Test Method for Strength Properties of Adhesives in Two-Ply Wood Construction in Shear by Tension Loading
ASTM D6121-13 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM C655-19 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
ASTM C655-18 Standard Specification for Reinforced Concrete D-Load Culvert, Storm Drain, and Sewer Pipe
ASTM C655-77 Standard Specification for Reinforced Concrete D-Load Culvert,Storm Drain, And Sewer Pipe
ASTM D6121-15 Standard Test Method for Evaluation of Load-Carrying Capacity of Lubricants Under Conditions of Low Speed and High Torque Used for Final Hypoid Drive Axles
ASTM E998-19 Standard Test Method for Structural Performance of Architectural Glass Products Under the Influence of Uniform Static Loads
ASTM D7452-14 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM E661-03 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
ASTM E997-14 Standard Test Method for Evaluating Glass Breakage Probability Under the Influence of Uniform Static Loads by Proof Load Testing
ASTM E661-03(2015)e1 Standard Test Method for Performance of Wood and Wood-Based Floor and Roof Sheathing Under Concentrated Static and Impact Loads
ASTM D7452-15 Standard Test Method for Evaluation of the Load Carrying Properties of Lubricants Used for Final Drive Axles, Under Conditions of High Speed and Shock Loading
ASTM F3396/F3396M-20 Standard Practice for Aircraft Simplified Loads Criteria

US-RTCA

RTCA DO-117-1963 STANDARD ADJUSTMENT CRITERIA FOR AIRBORNE LOCALIZER AND GLIDE SLOPE RECEIVERS

American National Standards Institute （ANSI)

ANSI H35.3-2017 American National Standard Designation System for Aluminum Hardeners Download
ANSI/IEEE 1609.3:2010 Standard for Wireless Access in Vehicular Environments (WAVE) - Networking Services
ANSI H35.4-2017 American National Standard Designation System for Unalloyed Aluminum Download
ANSI/IEEE 1609.4:2011 Standard for Wireless Access in Vehicular Environments (WAVE) - Multi-Channel Operation
ANSI/NFPA 520-2010 Standard on Subterranean Spaces

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std C37.74/INT 1-2004 IEEE Standards Interpretation for IEEE Std C37.74-2003 IEEE Standard Requirements for Subsurface, Vault, and Pad-Mounted Load-Interrupter Switchgear and Fused Load-Interrupter Switchgear for Alternating Current Systems Up to 38 kV
IEEE Std C37.74-2003 Requirements for subsurface, vault, and pad-mounted load-interrupter switchgear and fused load-interrupter switchgear for alternating current systems up to 38 kV
ANSI/IEEE Std 738-1986 IEEE Standard for Calculation of Bare Overhead Conductor Temperature and Ampacity Under Steady-State Conditions
ANSI/IEEE C37.010b-1985 IEEE Standard for Emergency Load Current-Carrying Capability

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C37.71-1984 Standard for Three-Phase@ Manually Operated Subsurface Load-Interrupting Switches for Alternating-Current Systems
IEEE 738-1986 STANDARD FOR CALCULATION OF BARE OVERHEAD CONDUCTOR TEMPERATURE AND AMPACITY UNDER STEADY-STATE CONDITIONS
IEEE C37.71-2001 Standard for Three-Phase@ Manually Operated Subsurface and Vault Load-Interrupting Switches for Alternating-Current Systems

British Standards Institution (BSI)

ASTM F2267-24 Standard Test Method for Measuring Load-Induced Subsidence of Intervertebral Body Fusion Device Under Static Axial Compression
BS EN ISO 10776:2012 Geotextiles and geotextile-related products. Determination of water permeability characteristics normal to the plane, under load

ESDU - Engineering Sciences Data Unit

ESDU 73004 A-1985 Criteria of yielding for ductile materials under static loading.
ESDU 73004 A-2013 Criteria of yielding for ductile materials under static loading
ESDU 97018-1997 STANDARD FATIGUE LOADING SEQUENCES
ESDU 97018 B-2003 Standard fatigue loading sequences.
ESDU 97018 A-1999 STANDARD FATIGUE LOADING SEQUENCES

SCC

AASHTO T 385-2019(2023) Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
AASHTO TP 100-2012(2018) Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
AASHTO TP 84-2011(2017) Standard of Method of Test for Evaluation of Adhesive Anchors in Concrete Under Sustained Loading Conditions

The American Road & Transportation Builders Association

AASHTO TP 100-2012 Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
AASHTO TP 84-2011(R2017) Standard Method of Test for Evaluation of Adhesive Anchors in Concrete under Sustained Loading Conditions
AASHTO T 385-2019 Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load
AASHTO TP 100-2012(R2018) Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load

AASHTO - American Association of State Highway and Transportation Officials

TP 100-2012 Standard Method of Test for Deep Foundation Elements under Bidirectional Static Axial Compressive Load

Society of Automotive Engineers (SAE)

SAE J818-1987 Rated Operating Load for Loaders, Standard
SAE ARINC665-5-2019 LOADABLE SOFTWARE STANDARDS
SAE ARINC665-4-2016 LOADABLE SOFTWARE STANDARDS
SAE ARINC665-2-2002 LOADABLE SOFTWARE STANDARDS

GSO

GSO ISO 7797:2016 Cross-country skis -- Determination of breaking load and deflection at break with quasistatic load
OS GSO ISO 7797:2016 Cross-country skis -- Determination of breaking load and deflection at break with quasistatic load
BH GSO ISO 7797:2017 Cross-country skis -- Determination of breaking load and deflection at break with quasistatic load

Association Francaise de Normalisation

NF ISO 7797:1994 Cross-country skis - Determination of the breaking load and the deformation at break under quasi-static load

CN-STDBOOK

图书 3-9269 Compilation of Gas Cylinder Standards (Part 2)

Others: standard download