Position inspection tool design
Position inspection tool design, Total:88 items.
The international standard classification for "Position inspection tool design" includes: Horology in general , Abrasives , Geology. Meteorology. Hydrology .
The Chinese standard classification for "Position inspection tool design" includes: Horology , Grinding material and apparatus , Mechanics Measurement , Chemical Measurement , Optical Measurement , Length Measurement , Thermal Measurement , Ionizating Radiation Measurement , Meteorology .
Group Standards of the People's Republic of China
- T/QGCML 1057-2023 Design specifications for automobile interior and exterior trim inspection tools
- T/WHHLW 14-2023 Automobile multi-station mold design specifications
- T/QGCML 3248-2024 Landscape design environment slope detection device
- T/JPALPDM 0002-2022 Requirements for setting up branches of lightning protection device testing units
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 2491-2003 Bonded abrasive products―Hardness grade measurement by rockwell tester
- GB/T 4028-1994 Timekeeping instruments-Symbolization of control positions
- GB/T 4028-2013 Symbolization of Control Positions for Timekeeping Instruments
National Metrological Verification Regulations of the People's Republic of China
- JJG 2034-2005 Verification Scheme of Measuring Instruments for Luminous Intensity
- JJG 2034-1989 Verification Scheme of Measuring Instruments for Luminous Intensity
- JJG(机械) 6-1990 Verification Regulations for Rockwell Hardness Tester for Abrasive Tools
- JJG 2046-1990 Measuring Instruments for Humidity
- JJG 2079-1990 Measuring Instruments for Neutron source Strength
- JJG 2002-1987 Verification Scheme of Measuring Instruments for Taper Gauges
- JJG 2069-1990 Verification Scheme of Measuring Instruments for Specular Gloss
- JJG 2026-1989 Measuring Instruments for Vickershandness
- JJG 2029-1989 Verification Scheme of Measuring Instruments for Chromaticity
- JJG 2040-1989 Measuring Instruments for Activity of Medical Radionuclide
- JJG 2030-1989 Measuring Instruments for Colour Temperature (Distribution Temperature)
- JJG 2049-1990 Measuring Instruments for International Rubber Hardness Degree
- JJG 2032-1989 Verification Scheme of Measuring Instruments for Illuminance
- JJG 2019-1989 Measuring Instruments for Flantness
- JJG 2092-1995 Verification Scheme of Measuring Instruments for Plastic Rockwell Hardness
- JJG 2090-1994 Verivication Regulation of Measuring Instruments for Vertex Power
- JJG 2069-2005 Verification Scheme of Measuring Instruments for Specular Gloss
- JJG 2036-1989 Measuring Instruments for Light Level Photometric
- JJG 2094-2010 Measuring Instruments for Density
- JJG 2005-1987 Verification Scheme of Brinel Hardness
- JJG 2032-2005 Verification Scheme of Measuring Instruments for Illuminance
- JJG 2018-1989 Measuring Instruments for Surface Roughness
- JJG 2060-1990 pH(acidity )Measuring Instrumetns
- JJG 2025-1989 Measuring Instruments for Microhardness
- JJG 2060-2014 pH(acidity)Measuring Instruments
- JJG 2016-1987 Viscosity Measuring Instruments
- JJG 2072-2016 Measuring Instruments for Shock Acceleration
- JJG 2067-1990 Measuring Instruments for Metallic Rockwell Hardness
- JJG 2020-1989 ~
- JJG 1071-2011 Verification Regulation of Verification Equipment of Linear Accelerometer by Earths Gravitation
- JJG 2072-1990 Measuring Instruments for Shock Acceleration
- JJG 2033-1989 Measuring Instruments for Luminance
- JJG 2062-1990 Temperature Measuring Instruments in the Range from 13.81 to 273.15K
- JJG 2056-1990 Measuring Instruments for Length (Gauge Block)
Professional Standard - Meteorology
- QX/T 403-2017 Specification for annual report of lightning protection system inspection units
Society of Automotive Engineers (SAE)
- SAE J4004-2008 Positioning the H-Point Design Tool Seating Reference Point and Seat Track Length
- SAE J4004-2005 Positioning the H-Point Design Tool Seating Reference Point and Seat Track Length
- SAE J4004_200808 Positioning the H-Point Design Tool - Seating Reference Point and Seat Track Length
- SAE J4004_202408 Positioning the H-Point Design Tool - Seating Reference Point and Seat Track Length
- SAE J4004-2024 Positioning the H-Point Design Tool - Seating Reference Point and Seat Track Length
- SAE J4004_200508 Positioning the H-Point Design Tool - Seating Reference Point and Seat Track Length
- SAE J209_198701 Instrument Face Design and Location for Construction and Industrial Equipment
- SAE J209_200305 Instrument Face Design and Location for Construction and Industrial Equipment
- SAE AS4052B-2008 Gland Design: Scraper, Landing Gear, Installation
- SAE AS1043A Safety Wire Holes, Hex, Fitting, Location of Design Standard
- SAE AS1043E Safety Wire Holes, Hex, Fitting, Location of Design Standard
- SAE AS1043H Safety Wire Holes, Hex, Fitting, Location Of, Design Standard
Association of German Mechanical Engineers
- VDI 2902 Blatt 2.2.8-1986 Checklists for design: medium- and major dies; Checklist: die setting sheet
- VDI/DGQ 3441-1977 Statistical testing of the working and positioning accuracy of machine tools; basics
- VDI 3253-1965 Lathe tool positions
- VDI 2902 Blatt 2.2.3-1982 Checklists for design: medium- and major dies; ckecklist: blank dies
- VDI 3441-1977 Statistical examination of working and positioning precision of machine-tools Fundamentals
German Institute for Standardization
- DIN ISO 3158 E:2017-07 Timekeeping instruments - Symbolization of control positions
- DIN 20610:1994-04 Lighting of mine locomotives; position lamps; design features, photometric requirements
- DIN ISO 3158:2018 Timekeeping instruments - Symbolization of control positions (ISO 3158:1976)
International Organization for Standardization (ISO)
- ISO 3158:1976 Timekeeping instruments; Symbolization of control positions
Ente Nazionale Italiano di Unificazione
- UNI ISO 230-2:2010 Test code for machine tools - Part 2: Determination of accuracy and repeatability of positioning numerically controlled axes
Institute of Transportation Engineers (ITE)
- RP-006B-1987 Guidelines for Driveway Location and Design
Standards Norway
- NS 6301:1985 Draught marks - Design and location
- NS 6301-1985 Draught marks - Design and location
Gosstandart of Russia
- GOST 8.462-1982 State system of ensuring the uniformity of measurements. Superhigh frequency phasemeters and phaseshifters. Methods and means of verification
- GOST 8.368-1979 State system for ensuring the uniformity of measurements. Radioisotope density meters of liquid media and pulps. Methods and means for verification
- GOST 8.478-1982 State system for ensuring the uniformity of measurements. D. c. measuring potentiometers. Methods and means of verification
- GOST 8.406-1980 State system for ensuring the uniformity of measurements. Hardness testing machines for rubber. Verification methods and means
- GOST 8.335-2004 State system for ensuring the uniformity of measurements. Hardness standard blocks. Methods of verification
- GOST 8.281-1978 State system for ensuring the uniformity of measurements. Locomotive speedometers. Methods and means of calibration
Bureau of Indian Standards
- IS 16716-2018 Robust Estimation for Location and Scale Parameters
Yugoslav Association for Standardization
- JUS U.C4.007-1991 Designing andconstruction ofroads. Locationplans
- JUS Z.S2.321-2004 Road signs Informative signs Place identification signs - Design of sign
- JUS N.M2.131-1988 Household electric sppliances. Dishwashers. Type place setting and servingpieces for testing
American National Standards Institute （ANSI)
- ANSI/ASME B5.50-2009 7/24 Taper Tool to Spindle Connection for Automatic Tool Change
- ANSI/ASME B5.50-2015 7/24 Taper Tool to Spindle Connection for Automatic Tool Change
Cuban Institute of Standards and Metrology
- NC 09-04-96-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Device. Locating Pins Design Specifications
- NC 09-04-72-1986 Unified Elements System of Molds. Dies, Stampers and Machine Devices. Machine Device. Location Interchangeable Cut Shank. Design Specifications
- NC 09-04-71-1986 Unified Elements System of Molcis, Dies, Stampers and Machine Devioes. Machine Device. Looation Interchangeable Cylindrical Shank. Design Specifications
- NC 09-04-98-1988 Unified Elements System of Moulds, Dies, Stampers and Machining Devices. Machining Devices, Bushings for Locating Pins. Design Specifications
Magyar Szabványügyi Testület
- MSZ 11398/8-1980 Units and domestic textile settings testing
- MSZ 8880/15.lap-1963 Electrical product testing tools and testing methods. Check with a hygrometer
Austrian Standards
- ONORM M 7804 Teil.3-1983 Guidelines for the design ofwelded joints; welding positions
American Association of State Highway and Transportation Officials
- GTB-1977 Guide for Selecting@ Location@ and Designing Traffic Barriers
Standard Association of Australia （SAA）
- SAA CA 14-1935 Design, location, erection and use of Road Signs for guidance of traffic
