iso20457 tolerance standard table TG6

iso20457 tolerance standard table TG6, Total:241 items.

The international standard classification for "iso20457 tolerance standard table TG6" includes: Limits and fits , Cables , Watches , Bottles. Pots. Jars , Radiocommunications .

The Chinese standard classification for "iso20457 tolerance standard table TG6" includes: Basic standards and general methods , Horology , Electric rotating machinery in general , Daily use glass products , Social and public safety in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1800.2-2009 Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 1800.3-1998 Limits and fits--Bases--Part 3:Numerical values tables of STANDARD toleranes and fundamental deviations
GB/T 1800.4-1999 Limits and fits Tables of STANDARD tolerance grades and limit deviations for holes and shafts
GB/T 17773-1999 Tolerancing of orientation and location Projected tolerance zone
GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation
GB 1800-1979 Tolerance and Fitting - General Standard Tolerance and Fundamental Deviation

Professional Standard - Light Industry

QB/T 2267-1996 Tolerance and Matching for Time Keeping Instrument - Standard Tolerance Value of Inserting Middle Tolerance Class with Size to 18mm
QB/T 4521-2013 Tolerances for watch linear dimensions up to 3mm without individual tolerance indications

Professional Standard - Machinery

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines General standard tolerances and fundamental deviations

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 1800.2-2020 Geometrical product specifications(GPS)—ISO code system for tolerances on linear sizes—Part 2:Tables of standard tolerance classes and limit deviations for holes and shafts
GB/T 37851-2019 Glass containers—Standard tolerances for flaconnage

Professional Standard - Military and Civilian Products

WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)

Professional Standard - Aviation

HB 5647-1998 Mark and Tolerance of Blade Profile and Surface Roughness of Blade

Professional Standard - Public Safety Standards

GA/Z 1415-2018 Diagram of standard system for public security communication

Japanese Industrial Standards Committee (JISC)

JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS B 0401-2:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
JIS B 0029:2000 Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone
JIS B 0419:1991 General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications
JIS B 0401-2 ERRATUM 1:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts (Erratum 1)

Society of Automotive Engineers (SAE)

SAE AS176C-2001 Limits, Table of Limits and Lubrication Charts
SAE J1058-1991 Sheet Steel Thickness and Profile@ Recommended Practice
SAE J1058-1976 Sheet Steel Thickness and Profile
SAE J1058-1999 Standard Sheet Steel Thickness and Tolerances
SAE J1058-2024 Standard Sheet Steel Thickness and Tolerances
SAE J1058-2015 Sheet Steel Thickness and Profile
SAE MAM2204-1983 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204C-1996 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE MAM2204A-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1989 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1994 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1989 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204H-1996 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204E-1983 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204F-2011 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204D-1973 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204A-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204B-1964 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204C-1966 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes

German Institute for Standardization

DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013
DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN EN ISO 12818 E:2014-12 Glass packaging-flaconnage tolerance standard (draft)
DIN EN ISO 12818:2015-08 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN 3140-8:1978 Measuring and tolerancing the surface texture of optical components
DIN EN 15904 E:2009 Draft Document - Glass packaging - Standard tolerances for flaconnage; German version prEN 15904:2009
DIN EN ISO 286-2:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN 2769:2023 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769:2023-04 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769 E:2020-09 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769:2021 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769 E:2022-10 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication

HU-MSZT

MSZ 180/3-1976 Tolerance and connection system. Standard tolerance size
MSZ MI 4739-1973 Connected tolerance standards
MSZ 4739-1973 Converged Grouping Tolerance Standards
MI 1867-1979 Monitoring of product tolerance standards and specifications
MSZ 180/3-1984 Tolerances and color matching system tolerances. Standard size
MSZ 180/2-1977 Tolerance and connection system. Marking of tolerances and connections
MSZ 11023/2-1984 R. C Part Surface Measurements and Tolerancing

Korean Agency for Technology and Standards (KATS)

KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS K 0042-2017 Standard tolerances for knit goods
KS K 0046-1976 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-1975 Standard tolerances for knit goods
KS K 0046-2012 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-2011 Standard tolerances for knit goods
KS K 0042-2022 Standard specification for tolerances for knitted fabrics
KS K 0044-2022 Standard tolerances for yarn spun on the woolen system
KS K 0044-1986 Standard tolerances for yarn spun on the woolen system
KS K 0040-1975 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0040-2019 Standard tolerances for manufactured organic-base man-made filament single yarns
KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS K 0044-2011 Standard tolerances for yarn spun on the woolen system
KS K 0040-2011 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0044-2016(2021) Standard tolerances for yarn spun on the woolen system
KS K 0044-2016 Standard tolerances for yarn spun on the woolen system
KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
KS K 0045-1982 Standard tolerances for tire cords made from man-made fibers
KS K 0045-2007 Standard tolerances for tire cords made from man-made fibers
KS B 0146-2006 GENERAL TOLERANCES-PART2:GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
KS K 0046-2017(2022) Standard tolerances for yarns spun on the cotton or worsted systems
KS B 0507-1975(2011) Roughness Comparison Specimens
KS K 0046-2023 Standard tolerances for yarns spun on the cotton or worsted systems
KS A ISO 10578:2013 Technical drawings-Tolerancing of orientation and location-Projected tolerance zone
KS A ISO 10578:2001 Technical drawings-Tolerancing of orientation and location-Projected tolerance zone

International Organization for Standardization (ISO)

ISO 286-2:1988/DAmd 1 ISO system of tolerances and fits — Part 2: Tables of standard tolerance degrees and limit deviations of bores and shafts — Amendment 1
ISO 9058:2008 Glass containers - Standard tolerances for bottles
ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 286-2:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 286-2:1988 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts
ISO 286-2:1988/Cor 1:2006 ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 7737:1986 Tolerances for building; Presentation of dimensional accuracy data
ISO 6284:1985 Tolerances for building; Indication of tolerances on building and construction drawings
ISO 12818:2013 Glass packaging - Standard tolerances for flaconnage

CU-NC

NC 16-17-1981 Interchangeabi lity Basic Standars. Surface Form and Position Toleranees. Terms and Basic Definitions
NC 16-13-1984 Basic Interchangeability Standards. Bevel and Hypoíd Gear Transmissions. Tolerances
NC 16-46-1981 Interchangeability Basic Standards. Metric Thread. Clearance Fit. Tolerances
NC 01-05-1967 Deviation of dimensions without tolerance indication.

Spanish Association for Standardization (UNE)

AENOR UNE-EN 20286-2:1996 ISO system of tolerances and adjustments. Part 2: Tables of normalized tolerance degrees and limit deviations of holes and shafts. (ISO 286-2:1988).
UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
UNE-EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
AENOR UNE-EN ISO 286-2/AC:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
UNE 25016:1956 TOLERANCES FOR LOCOMOTIVES WHEELS OF SPANISH STANDARD GANGE
UNE-EN 20286-2:1996 ISO SYSTEM OF LIMITS AND FITS. PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS. (ISO 286-2:1988).
AENOR UNE-EN ISO 286-2:2011 Geometric Product Specification (GPS). ISO coding system for tolerances in linear dimensions. Part 2: Tables of normalized tolerance classes and limit deviations for holes and shafts. (ISO 286-2:2010)
UNE 1128:1995 TECHNICAL DRAWINGS. GEOMETRICAL TOLERANCING. DATUMS AND DATUM-SYSTEMS FOR GEOMETRICAL TOLERANCES.

Standard Association of Australia （SAA）

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

Ente Nazionale Italiano di Unificazione

UNI EN 20286-2:1995 ISO System of limit and fits. Tables of standard tolerance grades and limit deviations for holes and shafts.
UNI EN ISO 5458:2001 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
UNI ISO 286-2:1990 ISO system of tolerances and fits. Tables of standard tolerance grades and limit deviations of holes and shafts
UNI EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
EC 1-2013 UNI EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
UNI EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
UNI 3885:1957 Tolerances on standard aircraft engine characteristics.
UNI EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
UNI EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage

AT-ON

ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts
ONORM ISO 2768 Teil.2:1990 General tolerances; geometrical tolerances for features without individual tolerance indications
ONORM EN 20286-2-1993 ISO System of limits and fits - Part 2: Tables of Standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)

VN-TCVN

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts
TCVN 7294-2-2003 General tolerances.Part 2: Geometrical tolerances for features without individual tolerance indications
TCVN 2263-2-2007 General tolerances.Part2:Geometrical tolerances for features without individual tolerance indications

SE-SIS

SIS SS-ISO 7737:1987 Tolerances for building - Presentation of dimensional accuracy data
SIS SMS 1357-1950 Instruments, Thread Tolerances, Minimum Reference Threads, Minimum or New High Standard Tolerances, Standard Diameters 1-20
SIS SMS 1486-1950 Instruments, Thread Tolerances, Reference Standards, Standard Diameters to 18
SIS SMS 1488-1950 Instruments, Cylinder Tolerances, References, Standards, Standard Diameters 18 to 180
SIS SMS 1338-1950 Instrument, maximum tolerance, standard diameter up to 18
SIS SS 2090-1990 ISO system of limits and fits — Standard tolerances
SIS SS 2100-1990 ISO system of limits and fits — Synoptic representation of basic sizes and corresponding standard for tolerances
SIS SMS 2400-1964 Tolerances for gauges. Synoptic tablefor holes and shafts

British Standards Institution (BSI)

BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS ISO 9058:2008 Glass containers - Standard tolerances for bottles
BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts
BS EN ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage
BS ISO 12818:2013 Glass packaging. Standard tolerances for flaconnage
BS ISO 129-1:2004 Technical drawings - Indication of dimensions and tolerances - General principles
BS EN 22768-2:1993 General tolerances - Geometrical tolerances for features without individual tolerance indications
BS 6107-1:1981 Rolling bearings: tolerances-Glossary of terms
BS EN 20286-2:1993 ISO system of limits and fits-ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
BS 4937-30:1993 International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system
12/30264547 DC BS ISO 12818. Glass packaging. Standard tolerances for flaconnage
09/30194908 DC BS EN 15904. Glass packaging. Standard tolerances for flaconnage

Association Francaise de Normalisation

NF L22-024:1967 List of standards for aircraft fasteners. ISO threads to ISO tolerances.
NF H35-213:2011 Glass packaging - Standard tolerances for flaconnage.
NF H35-213*NF EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
NF E02-100-2*NF EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.
NF EN ISO 286-2:2010 Geometrical Product Specification (GPS) - ISO coding system for tolerances on linear sizes - Part 2: tables of standardized tolerance classes and limit deviations for bores and shafts
NF EN ISO 12818:2015 Emballages en verre - Tolérances standard pour flaconnage
NF L22-023:1967 List of standards for aircraft fasteners. ISO threads to B.N.A.E. Tolerances.
NF E02-100-2:1993 Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.
NF E75-079:1987 COATED ABRASIVE PRODUCTS. DIMENSIONAL TOLERANCES ON NON-STANDARD CONVERSIONS.
NF P97-401:1977 Lighting columns. Dimensions and tolerances.

RO-ASRO

STAS 6725-1968 STAS standard tolerances and calibration. Tolerances and calibrations for sizes 500-1000mm
STAS 10265/1-1984 Tolerances for buildings TOLERANCE FOR ROUGH CONCRETE SURFACES
STAS 53-1952 Tolerances and calibration. Tolerance and calibration terminology
STAS 10848-1990 Gauges for surfaces position control tolerances

European Committee for Standardization (CEN)

EN 15904:2010 Glass packaging - Standard tolerances for flaconnage
EN 20286-2:1993 ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts ISO 286-2 : 1988
prEN 20286-2-1992 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)
EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
EN 22768-2:1993 General tolerances; part 2: geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)

PL-PKN

PN M02155-1989 Round screw threads Tolerances for gauges
PN M02168-02-1991 General tolerances Geometrical tolerances for features without individual tolerance indications
PN M02158-1990 Trapezoidal multi - start screw threads Tolerances for gauges
PN M02141-1986 Height and deph limit gauges Tolerances
PN M01131-1989 Technical drawing. Dimensioning and tolerancing of profiles and surfaces

BR-ABNT

ABNT NB-172-1971 Standard ruler. architectural features, tolerances

American Society for Testing and Materials (ASTM)

ASTM D3887-96(2008) Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96(2004) Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96 Standard Specification for Tolerances for Knitted Fabrics
ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2644-02(2007) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12(2018) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-81(1996)e1 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-02 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM F1053/F1053M-94 Standard Guide for Steel Hull Construction Tolerances [Metric] (Withdrawn 2003)
ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D4543-85(1991)e1 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM D4543-01 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM D2911-10 Standard Specification for Dimensions and Tolerances for Plastic Bottles

NL-NEN

NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen

Canadian Standards Association (CSA)

CSA B97.1-1970(R2002) Standard Tolerances for Linear Dimensions, Inch and Metric
CSA B97.3-M1982-1982(R2002) Tolerances and Standard Fits for Mating Parts, Metric Sizes
CSA B97.1-1970(1992) Standard Tolerances (Linear Dimensions Imperial and Metric)

Danish Standards Foundation

DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DANSK DS/EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
DANSK DS/EN ISO 286-2/AC:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
DS/EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
DANSK DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
DANSK DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/ISO 6284:1987 Tolerances for building. Indication of tolerances on building and construction drawings

Standards Norway

NS-ISO 286-2:1988 ISO-system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviation for holes and shafts
NS 1557:1966 ISO tolerances and fits — Bore tolerances — Selection for general purposes
NS-EN 15904:2010 Glass packaging — Standard tolerances for flaconnage
NS-EN ISO 12818:2015 Glass packaging — Standard tolerances for flaconnage (ISO 12818:2013)
NS 1428-1982 Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances
NS 1428:1982 Technical drawings — Geometrical tolerancing — Datums and datum-systems for geometrical tolerances

GCC Standardization Organization

GSO ISO 286-2:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
GSO ISO 9058:2016 Glass containers -- Standard tolerances for bottles

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 286-2:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
OS GSO ISO 9058:2016 Glass containers -- Standard tolerances for bottles
OS GSO ISO 12818:2015 Glass packaging -- Standard tolerances for flaconnage

American National Standards Institute （ANSI)

ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 12818:2017 Glass packaging -- Standard tolerances for flaconnage
BH GSO ISO 9058:2017 Glass containers -- Standard tolerances for bottles

Gosstandart of Russia

GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST R ISO 9058-2010 Glass containers. Bottles. Standard tolerances of nominal dimensions
GOST ISO 9058-2013 Glass containers. Bottles. Standard tolerances from nominal dimensions
GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions

Lithuanian Standards Office

LST EN 15904-2011 Glass packaging - Standard tolerances for flaconnage
LST EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)

TH-TISI

TIS 377-1981 Standard for tolerances for bolts, screws, nuts and studs
TIS 210.6-1986 Standard for mechanical drawings.part 6: geometrical tolerancpng-symbols and indications on drawings

American Society of Mechanical Engineers (ASME)

ASME PDS-1.1-2013 Dimensioning@ Tolerancing@ Surface Texture@ and Metrology Standards �� Rules for Drawings With Incomplete Reference to Applicable Drawing Standard
ASME PDS-1.1-2023 Default Standards for Understanding Engineering Documentation with Incomplete Reference to Applicable Dimensioning, Tolerancing, Surface Texture, and Metrology Standards

Association of German Mechanical Engineers

VDI 2730 BLATT 1-2018 Tolerances and tolerance managment for linkages - Checklists - Approach and tolls

Swedish Institute for Standards

SS-EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
SS-EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013)

Bureau of Indian Standards

IS 2102-2-1993 General tolerances Part 2 Geometrical tolerances for features without individual tolerance indications
IS 919-2-2014 ISO systems of limits and fits Part 2 Tables of standard tolerance grades and limit deviations for holes and shafts (Second Revision)

CZ-CSN

CSN 01 4949-1976 Straight ? face splined joints. Tolerances
CSN ISO 2768-2:1994 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications

BE-NBN

NBN-ISO 3443-6:1992 Tolerances for building - Part 6 : General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control - Method 1

TR-TSE

TS 2352-1976 TOLERANCES FOR RUILDING — VOCABULARY

Others: