National standard conducted and power radiation testing

National standard conducted and power radiation testing, Total:94 items.

The international standard classification for "National standard conducted and power radiation testing" includes: Optoelectronics. Laser equipment , Aircraft and space vehicles in general .

The Chinese standard classification for "National standard conducted and power radiation testing" includes: Laser device , Radio Measurement , Mobile communication equipment , Basic standards and general methods .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13863-2011 Test methods for laser radiation power and its instability
GB/T 7287.8-1987 Measuring method for power deviation rate of infrared heater
GB/T 13864-1992 Testing method for laser radiant power stability
GB/T 13863-1992 Testing method for laser radiant power

Professional Standard - Electron

SJ/T 2658.13-2015 Measuring method for semiconductor infrared-emitting diode. Part 13: Temperature coefficient for radiant power
SJ/T 2658.6-2015 Measuring method for semiconductor infrared-emitting diode. Part 6: Radiant power

National Metrological Verification Regulations of the People's Republic of China

JJG 534-1988 ~

Professional Standard - Post and Telecommunication

YD/T 1484-2006 Measurement Method for Radiated RF Power and Receiver Performance of Mobile Stations
YD/T 1484-2011 Measurement method for radiated RF power and receiver performance of mobile stations

Military Standard of the People's Republic of China-General Armament Department

GJB 8218-2014 Measure method for the high power ultra-wide band pulse radiation field

未注明发布机构

DIN EN 61161:1999 Ultrasonics - Power measurement - Radiation force balances and performance requirements

Hebei Provincial Standard of the People's Republic of China

DB13/T 2542-2017 Test procedure for solar radiation reflectivity of pavement

Professional Standard - Aerospace

QJ 3023-1998 Testing Method of Radio-frequency Power

RU-GOST R

GOST 19834.4-1979 Semiconductor radiating infra-red diodes. Methods of measurement of radiation power
GOST R 8.843-2013 State system for ensuring the uniformity of measurement. Insruments of measurement of radiant power semiconductor emitter diode. Verification procedure
GOST R 8.842-2013 State system for ensuring the uniformity of measurement. Insruments for measurement of radiant power semiconductor emitter diode. Verification procedure
GOST 8.197-2013 State system for ensuring the uniformity of measurements. State verification scheme for instruments measuring of the spectral radiance, spectral radiant power, spectral irradiance, spectral radiant intensity, power and radiant intensity in spectral range
GOST R 8.720-2010 State system for ensuring the uniformity of measurements. Optical power meters, optical radiation sources, return loss meters and optical testers for fiber-optical transfer systems. Verification procedure

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 300-1969 USA Standard and IEEE Test Procedure for Semiconductor Radiation Detectors (For Ionizing Radiation)
IEEE No 300-1969*USAS N42.1-1969 USA Standard and IEEE Test Procedure for Semiconductor Radiation Detectors (For Ionizing Radiation)
ANSI Std N323-1978 American National Standard Radiation Protection Instrumentation Test and Calibration
IEEE/ANSI N323-1978 American National Standard Radiation Protection Instrumentation Test and Calibration
IEEE/ANSI N42.31-2003 American National Standard for Measurement Procedures for Resolution and Efficiency of Wide-Bandgap Semiconductor Detectors of Ionizing Radiation
ANSI C63.30-2021 American National Standard for Methods of Measurements of Radio-Frequency Emissions from Wireless Power Transfer Equipment
IEEE Std C63.30-2021 American National Standard for Methods of Measurement of Radio-Frequency Emissions from Wireless Power Transfer Equipment
IEEE/ANSI C63.30-2021 American National Standard for Methods of Measurements of Radio-Frequency Emissions from Wireless Power Transfer Equipment
IEEE/ANSI C63.7-2015 American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements
ANSI/IEEE PC63.7/D rev17, December 2014 American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements
IEEE Std 470-1972 IEEE Standard Application Guide for Bolometric Power Meters
IEEE Std N323C-2009 American National Standard for Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
IEEE Std N323C-2009 (New Standard) American National Standard for Radiation Protection Instrumentation Test and Calibration - Air Monitoring Instruments
IEEE/ANSI C95.3-1973 American National Standard Techniques and Instrumentation for the Measurement of Potentially Hazardous Electromagnetic Radiation at Microwave Frequencies
ANSI Std C95.3-1973 American National Standard Techniques and Instrumentation for the Measurement of Potentially Hazardous Electromagnetic Radiation at Microwave Frequencies
IEEE/ANSI N323A-1997 American National Standard Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI N323AB-2013 (Revision and Redesignation of ANSI N323A-1997 and ANSI N323B-2002) American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI C63.25.1-2018 American National Standard Validation Methods for Radiated Emission Test Sites, 1 GHz to 18 GHz
IEEE/ANSI C63.25.1-2018 American National Standard Validation Methods for Radiated Emission Test Sites, 1 GHz to 18 GHz
IEEE/ANSI N323AB-2013 American National Standard for Radiation Protection Instrumentation Test and Calibration, Portable Survey Instruments
ANSI PC63.25.1/D1.01, August 2018 American National Standard Validation Methods for Radiated Emission Test Sites, 1 GHz to 18 GHz
ANSI/USEMCSC C63.25.2-2024 American National Standard for Validation Methods for Radiated Emission Test Sites, 30 MHz to 1 GHz

Korean Agency for Technology and Standards (KATS)

KS C IEC 61000-2-13-2012(2017) Electromagnetic compatibility(EMC)－Part 2-13：Environment－Highpower electromagnetic(HPEM) environments－Radiated and conducted
KS C IEC 61000-2-13:2021 Electromagnetic compatibility(EMC) — Part 2-13: Environment —High-power electromagnetic(HPEM) environments —Radiated and conducted
KS C 6108-2013 Power and energy measuring detectors Instruments and equipment for laser radiation
KS C 6108-1997 Power and energy measuring detectors Instruments and equipment for laser radiation

GSO

OS GSO IEC 61000-2-13:2008 Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted
BH GSO IEC 61000-2-13:2016 Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted

ZA-SANS

SANS 61000-2-13:2007 Electromagnetic compatibility (EMC) Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted

KR-KS

KS C IEC 61000-2-13-2021 Electromagnetic compatibility(EMC) — Part 2-13: Environment —High-power electromagnetic(HPEM) environments —Radiated and conducted

International Electrotechnical Commission (IEC)

IEC 61000-2-13:2005 Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments, radiated and conducted
IEC 61040:1990 Power and energy measuring detectors, instruments and equipment for laser radiation
IEC 61161:2013 Ultrasonics - Power measurement - Radiation force balances and performance requirements
IEC 61161:2006 Ultrasonics - Power measurement - Radiation force balances and performance requirements

American National Standards Institute （ANSI)

ANSI/IEEE C63.30:2021 American National Standard for Methods of Measurement of Radio-Frequency Emissions from Wireless Power Transfer Equipment

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C63.7-2015 American National Standard Guide for Construction of Test Sites for Performing Radiated Emission Measurements
IEEE C63.25.1-2018 American National Standard Validation Methods for Radiated Emission Test Sites@ 1 GHz to 18 GHz
IEEE 470-1972 STANDARD APPLICATION GUIDE FOR BOLOMETRIC POWER METERS; CORRECTION - FEBRUARY 1973

SAE - SAE International

SAE J1113-3-1995 Conducted Immunity@ 250 kHZ to MHz@ Direct Injection of Radio Frequency (RF) Power@ Standard

ECIA - Electronic Components Industry Association

TEP 181-1980 Measurement of X-Radiation from Power Tubes@ Recommended Practice for

Standard Association of Australia （SAA）

AS 3706.10.1:2001 Geotextiles - Methods of test - Determination of transmissivity - Radial method

BE-NBN

NBN-EN 61040-1993 Power and energy measuring detectors, instruments and equipment for laser radiation

German Institute for Standardization

DIN EN 61967-6:2008 Integrated circuits - Measurement of electromagnetic emissions, 150 kHz to 1 GHz - Part 6: Measurement of conducted emissions - Magnetic probe method (IEC 61967-6:2002 + A1:2008); German version EN 61967-6:2002 + A1:2008
DIN EN 61040:1993 Power and energy measuring detectors, instruments and equipment for laser radiation (IEC 61040:1990); German version EN 61040:1992

Society of Automotive Engineers (SAE)

SAE J1113/3-2006 Conducted Immunity, 250 kHz to 400 MHz, Direct Injection of Radio Frequency (RF) Power

Danish Standards Foundation

DS/EN 61040:1994 Power and energy measuring detectors, instruments and equipment for laser radiation
DS/EN 61161:2008 Ultrasonics - Power measurement - Radiation force balances and performance requirements
DS/EN 61161:2013 Ultrasonics - Power measurement - Radiation force balances and performance requirements

SCC

BS EN 25136:1994 Acoustics. Determination of sound power radiated into a duct by fans. In-duct method
CEI EN 61161:2014 Ultrasonics - Power measurement - Radiation force balances and performance requirements
DANSK DS/EN 61161:2013 Ultrasonics - Power measurement - Radiation force balances and performance requirements
ASA S12.23-1989(R2020) American National Standard Method for the Designation of Sound Power Emitted by Machinery and Equipment
DIN IEC 61000-2-13 E:2005 Draft Document - Electromagnetic compatibility (EMC) - Part 2-13: Environment - High-power electromagnetic (HPEM) environments - Radiated and conducted (IEC 61000-2-13:2005)
CEI EN 61040:1998 Power and energy measuring detectors, instruments and equipment for laser radiation

CENELEC - European Committee for Electrotechnical Standardization

EN 61161:1998 Ultrasonic Power Measurement in Liquids in the Frequency Range 0.5 MHz to 25 MHz (Incorporates Amendment A1: 1998)
EN 61161:1994 Ultrasonic Power Measurement in Liquids in the Frequency Range 0.5 MHz to 25 MHz (IEC 1161:1992)

European Committee for Electrotechnical Standardization（CENELEC）

EN 61161:2013 Ultrasonics - Power measurement - Radiation force balances and performance requirements
EN 61161:2007 Ultrasonics - Power measurement - Radiation force balances and performance requirements (Remains Current)
EN 61040:1992 Power and Energy Measuring Detectors, Instruments and Equipment for Laser Radiation

ES-UNE

UNE-EN 61161:2013 Ultrasonics - Power measurement - Radiation force balances and performance requirements (Endorsed by AENOR in May of 2013.)

IN-BIS

IS 4546-1983 Methods of measurement of radiated and conducted interference in receivers for amplitude modulation, frequency modulation and television broadcast transmissions

GB-REG

REG NASA-LLIS-0767--2000 Lessons Learned ?Conducted and Radiated Emissions Design Requirements

Association Francaise de Normalisation

NF S31-063:1994 Acoustics. Determination of sound power radiated into a duct by fans. In-duct method.
NF EN 61161:2013 Ultrasound - Power measurement - Radiation force balances and operating requirements
NF C97-905:2008 Ultrasonics - Power measurement - Radiation force balances and performance requirements.
NF C97-905*NF EN 61161:2013 Ultrasonics - Power measurement - Radiation force balances and performance requirements
NF C43-803:1993 Power and energy measuring detectors, instruments and equipment for laser radiation.

CN-STDBOOK

图书 3-8525 Compilation of National Standards for Nuclear Radiation Protection Instruments and Radiation Monitoring

British Standards Institution (BSI)

BS EN 61161:2007 Ultrasonics - Power measurement - Radiation force balances and performance requirements
BS EN 61161:2013 Ultrasonics. Power measurement. Radiation force balances and performance requirements
BS EN 61040:1993 Specification for power and energy measuring detectors, instruments and equipment for laser radiation

American Society for Testing and Materials (ASTM)

ASTM E1653-94(1999) Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides
ASTM E1653-94(2004) Standard Guide for Specifying Dynamic Characteristics of Optical Radiation Transmitting Fiber Waveguides

Japanese Industrial Standards Committee (JISC)

JIS C 6181:1995 Power and energy measuring detectors, instruments and equipment for laser radiation

International Organization for Standardization (ISO)

ISO/DIS 11554:2023 Optics and photonics — Lasers and laser-related equipment — Test methods for laser beam radiant power, radiant energy and temporal characteristics

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0835-1993 Power and energy measuring detectors@ instruments and equipment for laser radiation (IEC 61040:1990); German version EN 61040:1992

Others: