Action head test method

Action head test method, Total:184 items.

The international standard classification for "Action head test method" includes: Testing of metals , Surface active agents .

The Chinese standard classification for "Action head test method" includes: Ultrasonic wave and sound radiation defectoscope , Tooth paste, soap and detergent , Surface active agent .

未注明发布机构

AS/NZS 4347.8:1995(R2014) Damp-proof courses and flashings - Methods of test - Preparation of coating bitumen for testing
ASTM RR-D18-2001 2022 D8153-Test Method for Determination of Soil Water Contents Using a Dielectric Permittivity Probe
NF EN 196-9:2010 Méthodes d'essai des ciments - Partie 9 : chaleur d'hydratation - Méthode semi-adiabatique

Professional Standard - Petroleum

SY 5807-2012 Lifting operation and test method of hydraulic piston pump
SY/T 5108-2014 Performance test procedure for proppants used in hydraulic fracturing and gravel filling
SY/T 5807-2012 Technology Method for Hydraulic Piston Pump Trip Operation and Test

国家能源局

SY/T 5733-2016 Method of well completion and layered testing and adjustment for zonal injection wells

Professional Standard - Machinery

JB/T 10062-1999 Testing methods for performance of probes used in ultrasonic flaw detection
JB/T 6847-1993 Nine-pin print head test method

Military Standard of the People's Republic of China-General Armament Department

GJB 383.16A-1997 Telemetry system and sub-system testing methods Measurement magnetic head testing methods
GJB 383.16-1988 Telemetry system and sub-system testing methods Measurement magnetic head testing methods

Professional Standard - Water Conservancy

SL 115-1995 Calibration method for variable head (cosntant head) permeameter

Professional Standard - Aerospace

QJ 1854-1990 Infrared seeker test method

Professional Standard - Light Industry

QB/T 1223-1991 Water specification and test method for use of surfactants as test solvents
QB/T 1223-2012 Surface active agents - Water used as a solvent for tests - Specification and test methods
QB 1223-1991 Surface Active Agents - Water Used as a Solvent for Tests - Specification and Test Methods

NO-SN

NS 3834-1988 Water taps - Test methods

Indonesia Standards

SNI 08-4334-1996 Test method for constant head of geotextile hydraulic transmissivity
SNI 12-0609-1989 Wood carving, Water content
SNI 03-3431-1994 Code for controlling horizontal displacement of rocks and building using inclinometer
SNI 8071-2016 Metode uji koefisien kelulusan air pada tanah gambut dengan tinggi tekan tetap
SNI 03-3403-1994 Test method for pressure strength of drilling core concrete.
SNI 05-6437-2000 Performance test methods for pumps using test models
SNI 14-0700-1998 Test method for mass density of wood for pulp
SNI 19-6743-2002 Examination methods for aquiver hydraulic propeties by using of Theis code

Korean Agency for Technology and Standards (KATS)

KS H 2123-2011(2016) Testing methods for canned fruits
KS H 2123-2011 Testing methods for canned fruits
KS I 3213-2009(2019) Testing methods for concentration of fine particles in highly purified water
KS H 2123-2021 Testing methods for canned fruits
KS R 1152-2012 Head restraint test method
KS I 3206-2008(2018) Testing method for industrial water
KS H 3109-2013(2018) Testing methods for canned meat
KS H 2146-1986 General testing methods for canned food
KS H 2146-2008 General testing methods for canned food
KS H 6001-2009(2018) Testing methods for canned oyster
KS H 2154-2014(2019) Testing methods for canned vegetables
KS H 2146-2013 General testing methods for canned food
KS I 3215-2008(2018) Testing method for pesticides of industrial water and waste water
KS K ISO 15027-3:2008 Immersion suits－Part 3：Test methods
KS H 6003-2009(2018) Testing methods for canned fish products

American National Standards Institute （ANSI)

ANSI/ASTM D370:1996 Test Method for Dehydration of Oil-Type Preservatives
BS EN ISO 4064-2:2017+A11:2022 Water meters for cold potable water and hot water Test methods (British Standard)

RU-GOST R

GOST 11310-1990 Asbestos cement pipes and couplings. Methods of test
GOST R 50050-1992 Surface active agents. Water used as a solvent for tests. Specifications and test methods
GOST 33396-2015 Geosynthetic materials. Method for determination of resistance to hydrolysis in water
GOST ISO 9801-2011 Trial case lenses. Technical requirement and test methods
GOST R ISO 19074-2017 Leather. Physical and mechanical tests. Method for determination of water absorption by capillary action (wicking)
GOST 310.5-1988 Cements. Test method for heat of hydration

IN-BIS

IS 391-1975 Method for determining the water penetration resistance of fabrics using the hydrostatic head test
IS 10802-1984 Method for determining the range radius of agricultural sprinkler heads
IS 4121-1967 Test method for determination of water permeability by capillary action of natural stone
IS 6784-1984 Water meter performance test method (household type)
IS 7940-1976 Method for determining the resistance of fabrics to water penetration by the static head test
IS 11442-1985 Agricultural tractor operator visual field test method

British Standards Institution (BSI)

BS EN 14187-5:2003 Cold applied joint sealants - Test method for the determination of the resistance to hydrolysis
BS 6280:1982 Method of vacuum (backsiphonage) test for water-using appliances
BS EN 15801:2009 Conservation of cultural property - Test methods - Determination of water absorption by capillarity
BS DD CEN/TS 13381-1:2006 Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
BS EN 15801:2010 Conservation of cultural property. Test methods. Determination of water absorption by capillarity
BS EN 13381-1:2020 Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
BS DD CEN/TS 13381-1:2005 Test methods for determining the contribution to the fire resistance of structural members — Part 1: Horizontal protective membranes
BS EN 13381-10:2020 Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
BS EN ISO 787-7:2009 General methods of test for pigments and extenders - Determination of residue on sieve - Water method - Manual procedure
BS EN 13381-1:2014 Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
BS EN 13381-7:2019 Test methods for determining the contribution to the fire resistance of structural members. Horizontal protective membranes
BS ISO 20304-2:2024 Fine bubble technology. Water treatment applications. Test methods using Escherichia coli as a test micro-organism
BS 4550-3.8:1978 Methods of testing cement - Physical tests - Test for heat of hydration
BS EN ISO 13165-2:2022 Water quality. Radium-226 - Test method using emanometry
BS EN ISO 13164-3:2020 Water quality. Radon-222 - Test method using emanometry
BS EN 295-3:1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Test methods

American Society for Testing and Materials (ASTM)

ASTM D4716/D4716M-14 Standard Test Method for Determining the (In-plane) Flow Rate per Unit Width and Hydraulic Transmissivity of a Geosynthetic Using a Constant Head
ASTM E2140-01(2023) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
ASTM E1418-98 Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process
ASTM E1418-16 Standard Practice for Visible Penetrant Testing Using the Water-Washable Process
ASTM D4044-96(2002) Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifiers
ASTM D4044-96 Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifiers
ASTM F22-02(2007) Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM D4044-96(2008) Standard Test Method for (Field Procedure) for Instantaneous Change in Head (Slug) Tests for Determining Hydraulic Properties of Aquifers
ASTM F22-02 Standard Test Method for Hydrophobic Surface Films by the Water-Break Test
ASTM F21-65(2007) Standard Test Method for Hydrophobic Surface Films by the Atomizer Test
ASTM C456-93(2003) Standard Test Method for Hydration Resistance of Basic Bricks and Shapes
ASTM E1418-04 Standard Test Method for Visible Penetrant Examination Using the Water-Washable Process
ASTM C266-08 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
ASTM E2140-01(2009) Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
ASTM E2140-01 Standard Test Method for Water Penetration of Metal Roof Panel Systems by Static Water Pressure Head
ASTM C266-04 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
ASTM C266-08e1 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
ASTM C266-13 Standard Test Method for Time of Setting of Hydraulic-Cement Paste by Gillmore Needles
ASTM C115-96a Standard Test Method for Fineness of Portland Cement by the Turbidimeter
ASTM F1365-91(2005) Standard Test Method for Water Infiltration Resistance of Plastic Underground Conduit Joints Which Use Flexible Elastomeric Seals
ASTM F2170-02 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes
ASTM F2170-09 Standard Test Method for Determining Relative Humidity in Concrete Floor Slabs Using in situ Probes

SCC

NS 3834:1988 Water taps — Test methods
BS 6864-2:1987 Laboratory tests on noise emission from appliances and equipment intended for use in water supply installations-Method for mounting and operating draw-off taps
UNE 104481-3-2:1994 MEMBRANES FOR WATERPROOFING. TEST METHODS. WATERTIGHTNESS OF WATERPROOFING SHEET JOINTS. PRESSURE AIR METHOD.
CAN/CGSB-4.2 No./No.26.3-M88-1988 Textile Test Methods Water Resistance - Variable Head Penetration Test
JIS S 3201:2019 Testing methods for household water purifiers
AENOR UNE 80404:2018 Cement testing methods. Validation of cement testing methods.
AS 2512.6:1981 Methods of testing protective helmets - Measurement of horizontal peripheral vision clearance
AS/NZS 2512.1:1996 Methods of testing protective helmets, Method 1: Definitions and headforms
AASHTO T 215-2014(2018) Standard Method of Test for Permeability of Granular Soils (Constant Head)
AS 1289.6.7.1:1999 Methods of testing soils for engineering purposes, Method 6.7.1: Soil strength and consolidation tests - Determination of permeability of a soil - Constant head method for a remoulded specimen
BS EN ISO 13165-2:2020 Water quality. Radium-226-Test method using emanometry
AASHTO T 215-2022 Standard Method of Test for Permeability of Granular Soils (Constant Head)
UNE-EN 295-3/A1:1999 VITRIFIED CLAY PIPES AND FITTINGS AND PIPE JOINTS FOR DRAINS AND SEWERS. PART 3: TEST METHODS
AS 1289.2.1.2:1992 Methods of testing soils for engineering purposes, Method 2.1.2: Soil moisture content tests - Determination of the moisture content of a soil - Sand bath method (subsidiary method)
BS EN 545:1995 Ductile iron pipes, fittings, accessories and their joints for water pipelines. Requirements and test methods
AS 2512.1:1981 Methods of testing protective helmets - Definitions and headforms
UNE-EN 545:2002 Ductile iron pipes, fittings, accesories and their joints for water pipelines- Requirements and test methods.
AS 2512.3.1:1981 Methods of testing protective helmets, Method 3.1: Determination of impact energy attenuation - Helmet drop test
CEI UNI EN/ISO 4064-2:2015 Water meters for cold potable water and hot water Part 2: Test methods
AS 1289.2.1.6:1993 Methods of testing soils for engineering purposes, Method 2.1.6: Soil moisture content tests - Determination of the moisture content of a soil - Hotplate drying method (subsidiary method)
AS A89.13E:1971 Methods of testing soils for engineering purposes, Method 13E: Field test for dry density using water replacement method
AWWA ACE65503 Optimization of Water Quality in Water Distribution Networks Using Operational Approaches

BE-NBN

NBN E 48-112-1987 Hydraulic transmission. Quick Connector. Test Methods
NBN T 91-202-1974 Testing water — Determination of the oxydability — Potassium permanganate method
NBN I 09-002-1976 Joints and accessories for steel pipe work scaffolding. Specifications and test methods

Canadian General Standards Board （CGSB)

CAN/CGSB-4.2 NO.26.1-M88-1988 Textile Test Methods Water Resistance - Static Head Penetration Test
CGSB 4.2 NO. 26.1-M88-CAN/CGSB-1988 Methodes Pour Epreuves Textiles Resistance A L'Eau - Essai De Penetration Sous Pression Constante

Association Francaise de Normalisation

NF ISO 2456:1987 Surfactants - Water used as solvent for tests - Specifications and test methods
NF X80-005*NF EN 15801:2010 Conservation of cultural property - Test methods - Determination of water absorption by capillarity
NF P98-897-5:2003 Cold applied joint sealants - Part 5 : test method for the determination of the resistance to hydrolysis.
NF G38-164:2003 Geotextiles and geotextile-related products - Screening test method for determining the resistance to hydrolysis in water.
NF E17-002-2*NF EN ISO 4064-2:2017 Water meters for cold potable water and hot water - Part 2: test methods

AENOR

UNE 55521:1988 SURFACE ACTIVE AGENTS. WATER USED AS A SOLVENT FOR TESTS. SPECIFICATIONS AND TEST METHODS

BR-ABNT

ABNT NBR 12170-2009 Drinking Water - Test Methods for Waterproofing Systems - Test Methods

CU-NC

NC 95-39-1988 Perfumery and Cosmetics, Hair Decolorants. Testing Methods
NC 26-140-1985 Drugs. Determination of Water by Karl Fisoher Method Testing Method

German Institute for Standardization

DIN EN 14187-5:2003 Cold applied joint sealants - Part 5: Test method for the determination of the resistance to hydrolysis; German version EN 14187-5:2003
DIN EN ISO 4064-2/A11:2023-02 Water meters for cold potable water and hot water - Part 2: Test methods (ISO 4064-2:2014); German version EN ISO 4064-2:2017/A11:2022

The American Road & Transportation Builders Association

AASHTO T 215-1970 Standard Method of Test for Permeability of Granular Soils (Constant Head)
AASHTO T 215-2014(R2018) Standard Method of Test for Permeability of Granular Soils (Constant Head)
AASHTO T 154-2009 Standard Method of Test for Time of Setting of Hydraulic Cement Paste by Gillmore Needles
AASHTO T 215-1970(R2007) Standard Method of Test for Permeability of Granular Soils (Constant Head)
AASHTO T 131-2008 Standard Method of Test for Time of Setting of Hydraulic Cement by Vicat Needle
AASHTO T 215-2014 Standard Method of Test for Permeability of Granular Soils (Constant Head)
AASHTO T 98-1999 Standard Method of Test for Fineness of Portland Cement by the Turbidimeter

ES-UNE

UNE 80404:2018 Methods of testing cement. Validation of cement test methods.

Japanese Industrial Standards Committee (JISC)

JIS K 0101:1998 Testing methods for industrial water
JIS K 0128:2000 Testing methods for pesticides in industrial water and waste water

PL-PKN

PN C04403-04-1989 Pigments for water paints and mortars Test methods Determination of the action of pigment upon water glass
PN A74855-03-1987 Su gar Test methods Determinution of grunulation

CZ-CSN

CSN EN 295-3-1995 Vitrified clay pipes and fittings and pipe joints for drains and sewers. Part 3 : Test methods
CSN 56 0246 Cast.12-1982 Methods of testing for canned semi-finished products and products of fruit and vegetables. Determination of mineral impurities
CSN 66 8514-1968 Methods for testing glues

ZA-SANS

SANS 50295-3:1991 Vitrified clay pipes and fittings and pipe joints for drains and sewers Part 3: Test methods

Standard Association of Australia （SAA）

AS/NZS 2512.6:2006 Methods of testing protective helmets Method 6: Measurement of horizontal peripheral vision clearance
AS/NZS 1462.10:1998 Methods of test for plastics pipes and fittings - Method for hydrostatic pressure testing of fittings and elastomeric seal joints for non-pressure applications
AS 1289.6.7.3:2016 Methods of testing soils for engineering purposes, Method 6.7.3: Soil strength and consolidation tests-Determination of permeability of a soil-Constant head method using a flexible wall permeameter
AS/NZS 2512.3.1:1999 Methods of testing protective helmets Method 3.1-Determination of impact energy attenuation-Helmet drop test
AS/NZS 4347.8:1995 Damp-proof courses and flashings - Methods of test - Preparation of coating bitumen for testing

GSO

GSO 2072:2010 Test methods of jug water filter for household uses
GSO 638:1996 METHODS OF TESTING ABSORBENT MEDICAL COTTON WOOL
OS GSO 638:1996 METHODS OF TESTING ABSORBENT MEDICAL COTTON WOOL
GSO ISO 9379:2007 Operating forces -- Test method -- Doors
GSO ISO 5682-1:2013 Equipment for crop protection -- Spraying equipment -- Part 1: Test methods for sprayer nozzles
GSO 584:1995 METHODS OF TEST FOR CLAY PIPES FOR DRAINING SEWAGE AND WATER
GSO 1812:2007 Methods of Test for Drinking Water Coolers
GSO EN 545:2021 Ductile iron pipes, fittings, accessories and their joints for water pipelines – Requirements and test methods
BH GSO ISO 2456:2016 Surface active agents -- Water used as a solvent for tests -- Specification and test methods
GSO 1094:2002 METHODS OF TEST FOR COMPLETE, FILLED TRANSPORT PACKAGES – WATER SPRAY TEST
OS GSO 1812:2007 Methods of Test for Drinking Water Coolers
GSO ISO 2456:2015 Surface active agents -- Water used as a solvent for tests -- Specification and test methods
OS GSO ISO 4064-2:2017 WATER METERS FOR COLD POTABLE WATER AND HOT WATER -- PART 2: TEST METHODS

International Federation of Trucks and Engines

NAVISTAR BT TEST-1998 VOID - BT Test Methods

US-AAMI

AAMI TIR58-2014 Water testing methodologies

US-FCR

FCR COE ER 1130-2-407-1977 OPERATING AND TESTING POTABLE WATER SYSTEMS IN COMPLIANCE WITH THE "SAFE DRINKING WATER ACT" (PUBLIC LAW 93-523)

AT-ON

ONORM M 1157-1-1994 Testing methods for foundry sands - Determination of moisture

SA-SASO

SASO SSA 414-1985 METHODS OF TESTING DRINKING WATER COOLERS

FI-SFS

SFS 3654-1976 Traffic helmet. Test Methods

AASHTO - American Association of State Highway and Transportation Officials

T 215-2014 Standard Method of Test for Permeability of Granular Soils (Constant Head)

YU-JUS

JUS U.M8.085-1980 Waterproofing. Methods oftesting

NL-NEN

NEN 3269-1988 Asbestos-cement pipes and joints for sewerage and drainage Requirements and test methods

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 802 Nendica Report: Flexible Factory IoT: Use Cases and Communication Requirements for Wired an IEEE 802 Nendica Report: Flexible Factory IoT: Use Cases and Communication Requirements for Wired and Wireless Bridged Networks

ETSI - European Telecommunications Standards Institute

EG 202 237-2010 Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); Generic approach to interoperability testing (V1.2.1)
EG 202 237-2007 Methods for Testing and Specification (MTS); Internet Protocol Testing (IPT); Generic approach to interoperability testing (V1.1.2)

International Organization for Standardization (ISO)

ISO 2456:1986 Surface active agents; Water used as a solvent for tests; Specification and test methods
ISO/DIS 4064-2:2023 Water meters for cold potable water and hot water — Part 2: Test methods