iso3547-1 tolerance standard table

iso3547-1 tolerance standard table, Total:324 items.

The international standard classification for "iso3547-1 tolerance standard table" includes: Limits and fits , Bottles. Pots. Jars , Cables , Rubber and plastics products in general , Watches , Radiocommunications .

The Chinese standard classification for "iso3547-1 tolerance standard table" includes: Basic standards and general methods , Daily use glass products , Rubber seal , Horology , Electric rotating machinery in general , Social and public safety in general .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1800-1979 General Tolerance and Fit Standard Tolerance and Basic Deviation
GB 1800-1979 Tolerance and Fitting - General Standard Tolerance and Fundamental Deviation
GB/T 3672.1-2025 Tolerances for rubber products—Part 1: Dimensional tolerances
GB/T 1800.3-1998 Limits and fits--Bases--Part 3:Numerical values tables of STANDARD toleranes and fundamental deviations
GB/T 17773-1999 Tolerancing of orientation and location Projected tolerance zone
GB/T 1800.4-1999 Limits and fits Tables of STANDARD tolerance grades and limit deviations for holes and shafts
GB/T 1800.2-2020 Geometrical product specifications(GPS)—ISO code system for tolerances on linear sizes—Part 2:Tables of standard tolerance classes and limit deviations for holes and shafts
GB/T 37851-2019 Glass containers—Standard tolerances for flaconnage
GB/T 1800.2-2009 Geometrical product specifications (GPS) - Limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
GB/T 3672.1-2002 Rubber--Tolerances of products--Part 1:Dimensional tolerances

Professional Standard - Light Industry

QB/T 2267-1996 Tolerance and Matching for Time Keeping Instrument - Standard Tolerance Value of Inserting Middle Tolerance Class with Size to 18mm
QB/T 4521-2013 Tolerances for watch linear dimensions up to 3mm without individual tolerance indications

Professional Standard - Machinery

JB/T 8995.1-1999 Tolerances and fits for large-size of large electrical machines and hydraulic turbines General standard tolerances and fundamental deviations

Professional Standard - Military and Civilian Products

WJ 1266-1981 Dimensional tolerance of plastic parts (limited standard)

Professional Standard - Aviation

HB 5647-1998 Mark and Tolerance of Blade Profile and Surface Roughness of Blade

Professional Standard - Public Safety Standards

GA/Z 1415-2018 Diagram of standard system for public security communication

Japanese Industrial Standards Committee (JISC)

JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS B 0401-2 ERRATUM 1:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts (Erratum 1)
JIS B 0401-2:2016 Geometrical product specifications (GPS) -- ISO code system for tolerances on linear sizes -- Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
JIS B 0029:2000 Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone
JIS B 0419:1991 General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications
JIS B 0405:1991 General tolerances -- Part 1: Tolerances for linear and angular dimensions without individual tolerance indications

International Organization for Standardization (ISO)

ISO 286-2:1988/DAmd 1 ISO system of tolerances and fits — Part 2: Tables of standard tolerance degrees and limit deviations of bores and shafts — Amendment 1
ISO 286-2:1988/Cor 1:2006 ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 286-2:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts; Technical Corrigendum 1
ISO 129-1:2004 Technical drawings - Indication of dimensions and tolerances - Part 1: General principles
ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
ISO 9058:2008 Glass containers - Standard tolerances for bottles
ISO 286-2:1988 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts
ISO 965-3:1998/cor 1:2009 ISO general purpose metric screw threads - Tolerances - Part 3: Deviations for constructional screw threads; Technical Corrigendum 1
ISO 7737:1986 Tolerances for building; Presentation of dimensional accuracy data
ISO 129-1:2018 Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles
ISO 6284:1985 Tolerances for building; Indication of tolerances on building and construction drawings
ISO 12818:2013 Glass packaging - Standard tolerances for flaconnage
ISO 3302-1:1996/Amd 1:2001 Rubber - Tolerances for products - Part 1: Dimensional tolerances; Amendment 1: Classification system for flash
ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 286-1:2010/cor 1:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits; Technical Corrigendum 1
ISO 3302-1:1996 Rubber - Tolerances for products - Part 1: Dimensional tolerances
ISO 1101:2012/Cor 1:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out; Technical Corrigendum 1
ISO 965-1:1998/cor 1:2009 ISO general-purpose metric screw threads - Tolerances - Part 1: Principles and basic data; Technical Corrigendum 1
ISO 14368-1:2000 Mineral and sapphire watch-glasses - Part 1: Dimensions and tolerances
ISO 2768-1:1989 General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications

Society of Automotive Engineers (SAE)

SAE AS176C-2001 Limits, Table of Limits and Lubrication Charts
SAE J1058-1991 Sheet Steel Thickness and Profile@ Recommended Practice
SAE J1058-2024 Standard Sheet Steel Thickness and Tolerances
SAE J1058_201504 Standard Sheet Steel Thickness and Tolerances
SAE J1058-1999 Standard Sheet Steel Thickness and Tolerances
SAE J1058-1976 Sheet Steel Thickness and Profile
SAE J1058-2015 Sheet Steel Thickness and Profile
SAE J1058_202403 Standard Sheet Steel Thickness and Tolerances
SAE J1058_199104 Standard Sheet Steel Thickness and Tolerances
SAE MAM2204-1983 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204B-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204A Tolerances, Metric, Aluminum Alloy Standard Structural Shapes (Cance
SAE MAM2204C-1996 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE MAM2204C Tolerances, Metric, Aluminum Alloy Standard Structural Shapes
SAE MAM2204B Tolerances, Metric, Aluminum Alloy Standard Structural Shapes (Cance
SAE MAM2204A-1994 TOLERANCES, METRIC Aluminum Alloy Standard Structural Shapes
SAE MAM2204 Tolerances, Metric, Aluminum Alloy Standard Structural Shapes (Cance
SAE MAM2204B-1989 Tolerances@ Metric Aluminum Alloy Standard Structural Shapes
SAE AMS2204C Tolerances, Aluminum Alloy Standard Structural Shapes
SAE AMS2204D Tolerances, Aluminum Alloy Standard Structural Shapes
SAE AMS2204 Tolerances, Aluminum Alloy Standard Structural Shapes
SAE AMS2204H Tolerances, Aluminum Alloy Standard Structural Shapes
SAE AMS2204B Tolerances, Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1989 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204F Tolerances, Aluminum Alloy Standard Structural Shapes
SAE AMS2204E Tolerances, Aluminum Alloy Standard Structural Shapes
SAE AMS2204G Tolerances, Aluminum Alloy Standard Structural Shapes
SAE AMS2204G-1994 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204H-1996 Tolerances Aluminum Alloy Standard Structural Shapes
SAE AMS2204E-1983 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204F-2011 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204D-1973 TOLERANCES Aluminum Alloy Standard Structural Shapes
SAE AMS2204A Tolerances, Aluminum Alloy Standard Structural Shapes
ADS RS724 Forgins, Tolerances and Surface Condition
SAE AMS2204A-1960 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE AMS2204C-1966 TOLERANCES Aluminum Rolled or Extruded Standard Structural Shapes
SAE RS724-1 RS724 Forgings, Tolerances and Surface Condition

German Institute for Standardization

DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN EN ISO 286-2:2019-02 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN EN ISO 286-2:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN 2769:2021-12 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769:2022-10 Draft Document - Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN ISO 2768-1:1991 General tolerances; tolerances for linear and angular dimensions without individual tolerance indications; identical with ISO 2768-1:1989
DIN EN ISO 286-2:2019-09 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010 + Cor 1:2013); German version EN ISO 286-2:2010 + AC:2013
DIN 7172:1991-04 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN EN ISO 12818 E:2014-12 Glass packaging-flaconnage tolerance standard (draft)
DIN EN ISO 12818:2015-08 Glass packaging - Standard tolerances for flaconnage (ISO 12818:2013); German version EN ISO 12818:2015
DIN EN 15904:2011-02 Glass packaging - Standard tolerances for flaconnage
DIN 7172:1991 Tolerances and limit deviations for sizes above 3150 mm up to 10000 mm; principles, standard tolerances and limit deviations
DIN EN ISO 286-2:2010-11 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
DIN 3140-8:1978 Measuring and tolerancing the surface texture of optical components
DIN ISO 3302-1:1999-10 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996)
DIN ISO 3302-1 E:2016-10 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DIN EN 15904 E:2009 Draft Document - Glass packaging - Standard tolerances for flaconnage; German version prEN 15904:2009
DIN ISO 3302-1:2018 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014)
DIN ISO 3302-1:1999 Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:1996)
DIN ISO 286-2:1990-11 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN EN 20286-2/A1 E:2008-02 Draft Document - Geometrical product specification (GPS) - ISO system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts - Amendment 1 (ISO 286-2:1988/DAM 1:2008); German version EN 20286-2:1993/p...
DIN 2769:2023 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN ISO 3302-1 E:2016 Draft Document - Rubber - Tolerances for products - Part 1: Dimensional tolerances (ISO 3302-1:2014); Text in German and English
DIN 2769:2023-04 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN EN ISO 286-1:2019 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits (ISO 286-1:2010 + Cor 1:2013) (includes Corrigendum :2013)
DIN 2769:2021 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769 E:2022-10 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769 E:2020-09 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN ISO 5459:1982-01 Technical drawings; geometrical tolerancing; datums and datum-systems for geometrical tolerances
DIN ISO 286-1:1990 ISO system of limits and fits; bases of tolerances, deviations and fits; identical with ISO 286-1:1988

Swedish Institute for Standards

SIS SMS 1357-1950 Instruments, Thread Tolerances, Minimum Reference Threads, Minimum or New High Standard Tolerances, Standard Diameters 1-20
SIS SS-ISO 7737:1987 Tolerances for building - Presentation of dimensional accuracy data
SIS SMS 1494-1950 Gauge, thread, tolerance max, reference min max and wear max, standard diameter over 1 to 20
SIS SMS 1486-1950 Instruments, Thread Tolerances, Reference Standards, Standard Diameters to 18
SIS SMS 1493-1950 Instrument, thread tolerance minimum, reference minimum, maximum and new height, standard, standard diameter 1 to 20
SIS SMS 1488-1950 Instruments, Cylinder Tolerances, References, Standards, Standard Diameters 18 to 180
SIS SMS 1338-1950 Instrument, maximum tolerance, standard diameter up to 18
SIS SS 2090-1990 ISO system of limits and fits — Standard tolerances
SIS SS 2100-1990 ISO system of limits and fits — Synoptic representation of basic sizes and corresponding standard for tolerances
SS-EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
SIS SMS 1363-1950 Instruments, spirals, thread tolerances, reference threads, standard diameters over 1 to 180
SS-EN 22768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)

Spanish Association for Standardization (UNE)

UNE-EN ISO 286-2:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts - Technical Corrigendum 1 (ISO 286-2:2010/Cor 1:2013)
AENOR UNE-EN 20286-2:1996 ISO system of tolerances and adjustments. Part 2: Tables of normalized tolerance degrees and limit deviations of holes and shafts. (ISO 286-2:1988).
UNE-EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
UNE-EN ISO 286-2:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
AENOR UNE-EN ISO 286-2/AC:2011 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
UNE-EN ISO 286-1:2011/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 1: Basis of tolerances, deviations and fits - Technical Corrigendum 1 (ISO 286-1:2010/Cor 1:2013)
UNE 25016:1956 TOLERANCES FOR LOCOMOTIVES WHEELS OF SPANISH STANDARD GANGE
UNE-EN 20286-2:1996 ISO SYSTEM OF LIMITS AND FITS. PART 2: TABLES OF STANDARD TOLERANCE GRADES AND LIMIT DEVIATIONS FOR HOLES AND SHAFTS. (ISO 286-2:1988).
UNE-ISO 3302-1:2023 Rubber. Tolerances for products. Part 1. Dimensional tolerances
UNE 53508-1:2001 Rubber. Tolerances for products. Part 1: Dimensional tolerances.
AENOR UNE-EN ISO 286-2:2011 Geometric Product Specification (GPS). ISO coding system for tolerances in linear dimensions. Part 2: Tables of normalized tolerance classes and limit deviations for holes and shafts. (ISO 286-2:2010)

Magyar Szabványügyi Testület

MSZ 180/3-1976 Tolerance and connection system. Standard tolerance size
MSZ MI 4739-1973 Connected tolerance standards
MSZ 4739-1973 Converged Grouping Tolerance Standards
MI 1867-1979 Monitoring of product tolerance standards and specifications
MSZ 180/3-1984 Tolerances and color matching system tolerances. Standard size
MSZ 180/2-1977 Tolerance and connection system. Marking of tolerances and connections
MSZ 11023/2-1984 R. C Part Surface Measurements and Tolerancing

Korean Agency for Technology and Standards (KATS)

KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS K 0042-2017 Standard tolerances for knit goods
KS K 0046-1976 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-1975 Standard tolerances for knit goods
KS K 0046-2012 Standard tolerances for yarns spun on the cotton or worsted systems
KS K 0042-2011 Standard tolerances for knit goods
KS B ISO 2768-1-2024 General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
KS K 0044-2022 Standard tolerances for yarn spun on the woolen system
KS K 0042-2022 Standard specification for tolerances for knitted fabrics
KS B 0412-1995 General tolerances-Part 1:Tolerances for linear and angular dimensions without individual tolerance indications
KS K 0044-1986 Standard tolerances for yarn spun on the woolen system
KS B ISO 286-2-2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS B ISO 286-2:2020 Geometrical product specifications(GPS) — ISO code system for tolerances on linear sizes — Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
KS K 0040-2024 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0040-2019 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0040-1975 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0044-2016(2021) Standard tolerances for yarn spun on the woolen system
KS K 0044-2011 Standard tolerances for yarn spun on the woolen system
KS K 0040-2011 Standard tolerances for manufactured organic-base man-made filament single yarns
KS K 0044-2016 Standard tolerances for yarn spun on the woolen system
KS M ISO 3302-1-2023 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1-2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1-2018(2023) Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS M ISO 3302-1:2018 Rubber — Tolerances for products — Part 1: Dimensional tolerances
KS B 0213-1974 Limits and Tolerances for Unified Coarse Screw Threads
KS B 0216-1974 Limits and Tolerances for Unified Fine Screw Threads
KS B ISO 2768-1:2016 General tolerances — Part 1: Tolerances of linear and angular dimensions without individual tolerance indications
KS K 0045-1982 Standard tolerances for tire cords made from man-made fibers
KS K 0045-2007 Standard tolerances for tire cords made from man-made fibers
KS B ISO 2768-1:2002 General tolerances-Part 1:Tolerances of linear and angular dimensions without individual tolerance indications
KS B ISO 2768-2-2014(2024) General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
KS B ISO 2768-1:2014 General tolerances — Part 1: Tolerances of linear and angular dimensions without individual tolerance indications
KS B ISO 14368-1:2013 Mineral and sapphire watch － glasses － Part 1: Dimensions and tolerances
KS B ISO 14368-1:2005 Mineral and sapphire watch-glasses-Part 1:Dimensions and tolerances
KS B 0507-1975(2011) Roughness Comparison Specimens
KS B 0146-2006 GENERAL TOLERANCES-PART2:GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS

Cuban Institute of Standards and Metrology

NC 16-17-1981 Interchangeabi lity Basic Standars. Surface Form and Position Toleranees. Terms and Basic Definitions
NC 16-13-1984 Basic Interchangeability Standards. Bevel and Hypoíd Gear Transmissions. Tolerances
NC 16-46-1981 Interchangeability Basic Standards. Metric Thread. Clearance Fit. Tolerances

Standard Association of Australia （SAA）

AS 1654.2:1995 ISO system of limits and fits - Tables of standard tolerance grades and limit deviations for holes and shafts

Ente Nazionale Italiano di Unificazione

UNI EN 20286-2:1995 ISO System of limit and fits. Tables of standard tolerance grades and limit deviations for holes and shafts.
UNI EN ISO 5458:2001 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
UNI EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
UNI ISO 286-2:1990 ISO system of tolerances and fits. Tables of standard tolerance grades and limit deviations of holes and shafts
EC 1-2013 UNI EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
UNI EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
UNI 3885:1957 Tolerances on standard aircraft engine characteristics.
UNI EN 15904:2011 Glass packaging - Standard tolerances for flaconnage

Austrian Standards

ONORM ISO 286 Teil.2:1990 ISO System oflimits andfits; tables of Standard tolerance grades and limit deviations for holes and shafts
ONORM ISO 2768 Teil.2:1990 General tolerances; geometrical tolerances for features without individual tolerance indications
ONORM EN 22768-1-1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
ONORM EN 20286-2-1993 ISO System of limits and fits - Part 2: Tables of Standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)

COMMISSION FOR THE STANDARDS, METROLOGY AND QUALITY OF VIETNAM (STAMEQ)

TCVN 2245-1999 ISO system of limits and fits.Tables of standard tolerance grades and limit deviations for holes and shafts
TCVN 7294-1-2003 General tolerances.Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
TCVN 2263-1-2007 General tolerances.Part1:Tolerances for linear and angular dimensions without individual tolerance indications
TCVN 7294-2-2003 General tolerances.Part 2: Geometrical tolerances for features without individual tolerance indications
TCVN 2263-2-2007 General tolerances.Part2:Geometrical tolerances for features without individual tolerance indications

Standards Norway

NS-EN 22768-1:1993 General tolerances — Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
NS-ISO 286-2:1988 ISO-system of limits and fits - Part 2: Tables of standard tolerance grades and limit deviation for holes and shafts
NS 1557:1966 ISO tolerances and fits — Bore tolerances — Selection for general purposes
NS-EN 15904:2010 Glass packaging — Standard tolerances for flaconnage
NS-EN ISO 12818:2015 Glass packaging — Standard tolerances for flaconnage (ISO 12818:2013)

European Committee for Standardization (CEN)

EN 22768-1:1993 General tolerances; part 1: tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)
EN ISO 129-1:2019 Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles (ISO 129-1:2018)
EN 15904:2010 Glass packaging - Standard tolerances for flaconnage
EN 20286-2:1993 ISO System of Limits and Fits - Part 2: Tables of Standard Tolerance Grades and Limit Deviations for Holes and Shafts ISO 286-2 : 1988
EN ISO 129-1:2019/A1:2021 Technical product documentation (TPD) - Presentation of dimensions and tolerances - Part 1: General principles - Amendment 1 (ISO 129-1:2018/Amd 1:2020)
prEN 20286-2-1992 ISO system of limits and fits; part 2: tables of standard tolerance grades and limit deviations for holes and shafts (ISO 286-2:1988)
EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage

British Standards Institution (BSI)

BS EN ISO 286-2:1990 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN 15904:2010 Glass packaging. Standard tolerances for flaconnage
BS EN ISO 286-2:2010 Geometrical product specifications (GPS). ISO code system for tolerances on linear sizes. Tables of standard tolerance classes and limit deviations for holes and shafts
BS EN ISO 286-2:2010(2013) Geometrical product specifications (GPS) — ISO code system for tolerances on linear sizes Part 2 : Tables of standard tolerance classes and limit deviations for holes and shafts
BS ISO 9058:2008 Glass containers - Standard tolerances for bottles
BS EN 20286-2:1993(2002) ISO system of limits and fits — Part 2 : Tables of standard tolerance grades and limit deviations for holes and shafts
BS EN ISO 12818:2015 Glass packaging. Standard tolerances for flaconnage
BS ISO 12818:2013 Glass packaging. Standard tolerances for flaconnage
BS ISO 129-1:2004 Technical drawings - Indication of dimensions and tolerances - General principles
BS ISO 3302-1:2014 Rubber. Tolerances for products. Dimensional tolerances
BS 3734-1:1997 Rubber. Tolerances for products. Dimensional tolerances
13/30278121 DC BS ISO 3302-1. Rubber. Tolerances for products. Part 1. Dimensional tolerances
BS EN 20286-2:1993 ISO system of limits and fits-ISO system of limits and fits. Tables of standard tolerance grades and limit deviations for holes and shafts
BS 6107-1:1981 Rolling bearings: tolerances-Glossary of terms
BS EN 22768-2:1993 General tolerances - Geometrical tolerances for features without individual tolerance indications
BS 4937-30:1993 International thermocouple reference tables - Extension and compensating cables - Tolerances and identification system
12/30264547 DC BS ISO 12818. Glass packaging. Standard tolerances for flaconnage
09/30194908 DC BS EN 15904. Glass packaging. Standard tolerances for flaconnage

Association Francaise de Normalisation

NF L22-024:1967 List of standards for aircraft fasteners. ISO threads to ISO tolerances.
NF H35-213:2011 Glass packaging - Standard tolerances for flaconnage.
NF H35-213*NF EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
NF E02-100-2*NF EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2 : tables of standard tolerance classes and limit deviations for holes and shafts.
NF E02-350-1*NF EN 22768-1:1993 General tolerances. Part 1 : tolerances for linear and angular dimensions without individual tolerance indications.
NF EN ISO 286-2:2010 Geometrical Product Specification (GPS) - ISO coding system for tolerances on linear sizes - Part 2: tables of standardized tolerance classes and limit deviations for bores and shafts
NF L22-023:1967 List of standards for aircraft fasteners. ISO threads to B.N.A.E. Tolerances.
NF EN ISO 12818:2015 Glass packaging - Standard tolerances for bottles
NF E02-100-2:1993 Iso system of limites and fits. Part 2 : tables of standard tolerance grades and limit deviations for holes and shafts.
NF ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
NF T47-001-1*NF ISO 3302-1:2014 Rubber - Tolerances for products - Part 1 : dimensional tolerances
NF ISO 14368-1:2008 Mineral and sapphire watch glasses - Part 1: dimensions and tolerances

National Standardisation Body (ASRO)

STAS 6725-1968 STAS standard tolerances and calibration. Tolerances and calibrations for sizes 500-1000mm
STAS 10265/1-1984 Tolerances for buildings TOLERANCE FOR ROUGH CONCRETE SURFACES
STAS 53-1952 Tolerances and calibration. Tolerance and calibration terminology
STAS SR EN 22768-1-1995 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
STAS 10848-1990 Gauges for surfaces position control tolerances

Belgian Standards Institute

NBN-ISO 3443-6:1992 Tolerances for building - Part 6 : General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control - Method 1

Polski Komitet Normalizacyjny (PKN)

PN M02155-1989 Round screw threads Tolerances for gauges
PN M02168-02-1991 General tolerances Geometrical tolerances for features without individual tolerance indications
PN M02158-1990 Trapezoidal multi - start screw threads Tolerances for gauges
PN M02141-1986 Height and deph limit gauges Tolerances
PN M01131-1989 Technical drawing. Dimensioning and tolerancing of profiles and surfaces

Czech Standards Institute (UNMZ)

CSN ISO 2768-1:1992 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
CSN 01 4949-1976 Straight ? face splined joints. Tolerances
CSN ISO 2768-2:1994 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications

Associação Brasileira de Normas Técnicas

ABNT NB-172-1971 Standard ruler. architectural features, tolerances

Danish Standards Foundation

DS/ISO 2768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
DANSK DS/ISO 2768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
DANSK DS/EN 22768-1:1993 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/EN ISO 286-2/AC:2013 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DANSK DS/EN ISO 286-2/AC:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DANSK DS/EN ISO 12818:2015 Glass packaging - Standard tolerances for flaconnage
DANSK DS/EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts
DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
DS/EN 15904:2011 Glass packaging - Standard tolerances for flaconnage
DANSK DS/ISO 9058:2008 Glass containers - Standard tolerances for bottles
DS/ISO 6284:1987 Tolerances for building. Indication of tolerances on building and construction drawings
DS/ISO 2768-1:1990 General tolerances. Part 1: Tolerances for linear and angular dimensions without individual tolerance indications
DANSK DS/ISO 3302-1:2014 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/ISO 3302-1/Amd. 1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances
DS/ISO 3302-1:2011 Rubber - Tolerances for products - Part 1: Dimensional tolerances

Netherlands Institute for Standardization

NEN-ISO 286-2:1989 ISO-passingstelsel. Deel 2: Tabellen met standaardtolerantiekwaliteiten en grensmaatafwijkingen voor gaten en assen

American Society for Testing and Materials (ASTM)

ASTM D3887-96(2008) Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96(2004) Standard Specification for Tolerances for Knitted Fabrics
ASTM D3887-96 Standard Specification for Tolerances for Knitted Fabrics
ASTM D2644-81(1996)e1 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12(2025) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2644-02(2007) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-12(2018) Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2644-02 Standard Tolerances for Yarns Spun on the Woolen System
ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94(2005) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911/D2911M-16 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM F1053/F1053M-94 Standard Guide for Steel Hull Construction Tolerances [Metric] (Withdrawn 2003)
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D4543-01 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances
ASTM D4543-85(1991)e1 Standard Practices for Preparing Rock Core Specimens and Determining Dimensional and Shape Tolerances

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 286-2:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
OS GSO ISO 12818:2015 Glass packaging -- Standard tolerances for flaconnage
OS GSO ISO 9058:2016 Glass containers -- Standard tolerances for bottles
OS GSO ISO 3443-6:2007 Tolerances for building -- Part 6: General principles for approval criteria, control of conformity with dimensional tolerance specifications and statistical control -- Method 1
OS GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances

GCC Standardization Organization

GSO ISO 286-2:2002 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
GSO ISO 9058:2016 Glass containers -- Standard tolerances for bottles
GSO ISO 3302-1:2015 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances

Canadian Standards Association (CSA)

CSA B97.1-1970(R2002) Standard Tolerances for Linear Dimensions, Inch and Metric
CSA B97.3-M1982-1982(R2002) Tolerances and Standard Fits for Mating Parts, Metric Sizes
CSA B97.1-1970(1992) Standard Tolerances (Linear Dimensions Imperial and Metric)

Gosstandart of Russia

GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST R ISO 9058-2010 Glass containers. Bottles. Standard tolerances of nominal dimensions
GOST ISO 9058-2013 Glass containers. Bottles. Standard tolerances from nominal dimensions
GOST 34038-2016 Glass packaging. Flacons. Standard tolerances from nominal dimensions

Lithuanian Standards Office

LST EN 15904-2011 Glass packaging - Standard tolerances for flaconnage
LST EN ISO 286-2:2010 Geometrical product specifications (GPS) - ISO code system for tolerances on linear sizes - Part 2: Tables of standard tolerance classes and limit deviations for holes and shafts (ISO 286-2:2010)
LST EN 22768-1-2001 General tolerances - Part 1: Tolerances for linear and angular dimensions without individual tolerance indications (ISO 2768-1:1989)

Bureau of Indian Standards

IS 2102-1-1993 General tolerances Part 1 Tolerances for linear and angular dimensions without individual tolerance indications (Third Revision)
IS 919-2-2014 ISO systems of limits and fits Part 2 Tables of standard tolerance grades and limit deviations for holes and shafts (Second Revision)
IS 2102-2-1993 General tolerances Part 2 Geometrical tolerances for features without individual tolerance indications

American National Standards Institute （ANSI)

ANSI H35.2M-2013 Standard Dimensional Tolerances for Aluminum Mill Products
ANSI H35.2-2013 Standard Dimensional Tolerances for Aluminum Mill Products

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 12818:2017 Glass packaging -- Standard tolerances for flaconnage
BH GSO ISO 9058:2017 Glass containers -- Standard tolerances for bottles
BH GSO ISO 3302-1:2016 Rubber -- Tolerances for products -- Part 1: Dimensional tolerances

South African Bureau of Standard

SANS 3302-1:2003 Rubber - Tolerances for products Part 1: Dimensional tolerances

American Society of Mechanical Engineers (ASME)

ASME PDS-1.1-2013 Dimensioning@ Tolerancing@ Surface Texture@ and Metrology Standards �� Rules for Drawings With Incomplete Reference to Applicable Drawing Standard
ASME PDS-1.1-2023 Default Standards for Understanding Engineering Documentation with Incomplete Reference to Applicable Dimensioning, Tolerancing, Surface Texture, and Metrology Standards

Thai Industrial Standards Institute (TISI)

TIS 377-1981 Standard for tolerances for bolts, screws, nuts and studs
TIS 210.6-1986 Standard for mechanical drawings.part 6: geometrical tolerancpng-symbols and indications on drawings

Association of German Mechanical Engineers

VDI 2730 BLATT 1-2018 Tolerances and tolerance managment for linkages - Checklists - Approach and tolls

ISUZU - Isuzu Motors Ltd.

ISA-E-005B-2015 General tolerance (Machining) - Part 1: Tolerance for linear and angular dimensions without individual tolerance indications (Japanese/English Version)

Türk Standardları Enstitüsü

TS 2352-1976 TOLERANCES FOR RUILDING — VOCABULARY

Others: