iso4624 adhesion test

iso4624 adhesion test, Total:253 items.

The international standard classification for "iso4624 adhesion test" includes: Paints and varnishes , Other non-ferrous metals and their alloys , Road engineering in general .

The Chinese standard classification for "iso4624 adhesion test" includes: Basic standard and general method for coating , Coating , Precious metals and their alloys , Highway engineering .

National Metrological Verification Regulations of the People's Republic of China

JJG 147-2020 Coating Adhesion Tester for Water Transport Engineering

Hebei Provincial Standard of the People's Republic of China

DB1311/T 039-2023 Calibration specifications for adhesion tester (pull-out method)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 5210-1985 Determination of adhesion of coats--Pull-off test
GB/T 1720-1979 Method of test for adhesion of paint films
GB/T 5210-2006 Paints and varnishes - Pull-off test for adhesion
GB 1720-1979 Method of test for adhesion of paint films
GB/T 17473.4-2008 Test methods of precious metals pastes used for microelectronics - Determination of adhesion

Professional Standard - Chemical Industry

HGB 4043-1960 Adhesion test of rubber and cloth

Group Standards of the People's Republic of China

T/GDCKCJH 041-2021 Performance requirements and test methods of portable adhesion tester

Professional Standard - Aviation

HB 7058-1994 Test method for adhesion of dry film lubricants

Professional Standard - Traffic

JT/T 685-2007 Measurer for adhesion performance of retroreflective sheeting

GM Holden Ltd

HOLDEN HN 0160-1980 Moulding Adhesion Test (Pluck Test)
HOLDEN HN 0160-2012 Moulding Adhesion Test (Pluck Test)
HOLDEN HN 0232-1989 Adhesions Test for Resinated Felt
HOLDEN HN 0232-2012 Adhesion Test for Resinated Felt

Swedish Institute for Standards

SS 137522:1981 Mortars - Testing - Adhesion
SS-EN ISO 11644:2009 Leather - Test for adhesion of finish (ISO 11644:2009)
SS-EN 12785:2000 Footwear - Test methods for whole shoe - Heel attachment

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 135.8-1974 Methods of Testing Paints and Pigments Adhesion Cross-Cut Adhesion Test
CGSB 1-GP-71 METH 135.3-1978 Methodes D'Essai Des Peintures Et Pigments Adherence Adherence Des Peintures Primaires Vinyliques
CGSB 1-GP-71 METH 135.4-1978 Methodes D'Essai Des Peintures Et Pigments Adherence Adherence Des Revetements Vinyliques
CGSB 1-GP-71 METH 135.2-1978 Methodes D'Essai Des Peintures Et Pigments Adherence Tenacite Et Adherence
CGSB 1-GP-71 METH 135.1-1974 Methods of Testing Paints and Pigments Adhesion Knife Test
CGSB 1-GP-71 METH 135.5-1978 Methodes D'Essai Des Peintures Et Pigments Adherence Adherence Des Peintures Primaires A L'Aluminium Anodise Pretraite
CGSB 1-GP-71 METH 135.6-1978 Methodes D'Essai Des Peintures Et Pigments Adherence Adherence Des Peintures De Finition A L'Aluminium Anodise Revetu D'Une Peinture Primaire

American Society for Testing and Materials (ASTM)

ASTM RR-D01-1181 2016 D2197-Test Method for Adhesion of Organic Coatings by Scrape Adhesion
ASTM F2127-01 Standard Test Method for Treestand Adherence
ASTM D7234-21 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM RR-D01-1008 1977 D3359-Test Methods for Rating Adhesion by Tape Test
ASTM RR-D01-1163 2012 D7234-Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D1871-98 Standard Test Methods for Adhesion of Single-Filament Steel Wire to Rubber
ASTM D7234-12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D2558-69(1984) Test methods for adhesion and peel strength of sole adhesives
ASTM D4925-89 Test Method for Flexibility and Adhesion of Finish on Leather
ASTM D6182-00(2005) Standard Test Method for Flexibility and Adhesion of Finish on Leather
ASTM D3543-93(1997) Standard Test Method for Metal Glide Adhesion
ASTM D3543-17 Standard Test Method for Metal Glide Adhesion
ASTM D6677-18(2022) Standard Test Method for Evaluating Adhesion by Knife
ASTM D3543-24 Standard Test Method for Metal Glide Adhesion
ASTM D2094-00(2023) Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM D3359-23 Standard Test Methods for Rating Adhesion by Tape Test

International Organization for Standardization (ISO)

ISO 11644:2022 | IULTCS/IUF 470 Leather — Test for adhesion of finish
ISO 11644:2009 | IULTCS/IUF 470 Leather — Test for adhesion of finish
ISO 11644:1993 | IULTCS/IUF 470:1996 Leather — Test for adhesion of finish
ISO 11644:2022 Leather — Test for adhesion of finish
ISO/TS 11405:2015 Dentistry - Testing of adhesion to tooth structure
ISO 4624:2023 Paints and varnishes. Pull-off test for adhesion
ISO/TS 11405:2003 Dental materials - Testing of adhesion to tooth structure

British Standards Institution (BSI)

BS EN ISO 11644:2022 Leather. Test for adhesion of finish
BS EN ISO 4624:2016 Paints and varnishes — Pulloff test for adhesion
PD ISO/TS 11405:2015 Dentistry. Testing of adhesion to tooth structure
21/30428184 DC BS EN ISO 11644. Leather. Test for adhesion of finish
BS EN ISO 17708:2018 Footwear. Test methods for whole shoe. Upper sole adhesion
BS 3900-E10:1979 Methods of test for paints-Pull-off test for adhesion
BS EN ISO 4624:2023 Paints and varnishes. Pull-off test for adhesion (British Standard)
BS PD ISO/TS 11405:2015 Dentistry. Testing of adhesion to tooth structure
BS 5909:1980 Method for scale adhesion test for oxygen-free copper
06/30160006 DC BS EN ISO 11644. Leather. Test for adhesion of finish
BS 6247:1982 Method of test for adhesion of aperture-card protection sheets
BS 903-A37:1979 Physical testing of rubber-Assessment of adhesion to and corrosion of metals
BS ISO 5603:2024 Rubber, vulcanized. Determination of adhesion to wire cord
BS ISO 5603:2007 Rubber, vulcanized. Determination of adhesion to wire cord
BS ISO 5603:2017 Rubber, vulcanized. Determination of adhesion to wire cord
BS ISO 4647:2021 Rubber, vulcanized. Determination of static adhesion to textile cord. H-pull test

GM North America

GM GM9802P-1988 Adhesion Test for Sealants
GM GM9510P-1995 Galvanic Paint Adhesion Test Procedure for Metal Parts
GM GM9525P-1988 Thermal Shock Test for Paint Adhesion
GM GM9834P-1998 Testing Adhesion of Clips/Hardware Bonded to Glass
GM GM9775P-1988 Tensile Test for Adhesion for Bonding Stationary Glass

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 11644:2016 Leather -- Test for adhesion of finish
BH GSO ISO 4746:2016 Oxygen-free copper -- Scale adhesion test
BH GSO ISO 17708:2016 Footwear -- Test methods for whole shoe -- Upper sole adhesion

German Institute for Standardization

DIN EN ISO 11644:2023-02 Leather - Test for adhesion of finish (ISO 11644:2022); German version EN ISO 11644:2022
DIN 53357:1982-10 Testing of plastics sheets; adhesion test
DIN EN ISO 11644:2004-01 Leather - Test for adhesion of finish (ISO 11644:1993)
DIN EN ISO 11644:2023 Leather - Test for adhesion of finish (ISO 11644:2022)
DIN EN ISO 4624:2022-09 Paints and varnishes - Pull-off test for adhesion (ISO/DIS 4624:2022); German and English version prEN ISO 4624:2022 / Note: Date of issue 2022-08-05*Intended as replacement for DIN EN ISO 4624 (2016-08).
DIN EN ISO 4624:2016-08 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016); German version EN ISO 4624:2016 / Note: To be replaced by DIN EN ISO 4624 (2022-09).
DIN EN ISO 17708:2018-10 Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018); German version EN ISO 17708:2018
DIN EN ISO 4624:2023 Paints and varnishes – Pull-off test for adhesion
DIN EN ISO 4624 E:2014-06 Paint and Varnish Adhesion Pull-off Test (Draft)
DIN EN ISO 17708 E:2015-09 Test methods for complete footwear - sole adhesion (draft)
DIN EN ISO 11644 E:2007 Draft Document - Leather - Test for adhesion of finish (ISO/DIS 11644:2007); German version prEN ISO 11644:2007
DIN EN ISO 4624:2023 Paints and varnishes – Pull-off test for adhesion
DIN EN 2828:1993-04 Aerospace series; adhesion test for metallic coatings by burnishing; german version EN 2828:1993
DIN SPEC 91063:2011-07 Adhesion of coatings
DIN EN ISO 17708:2018 Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018)
DIN/TS 53263:2020 Footwear - Test methods - Determination of upper-sole adhesion on the whole shoe
DIN 58196-6:1995-07 Optical coatings - Part 6: Testing of the adhesion with a tape (tape test)
DIN EN ISO 11644:2004 Leather - Test for adhesion of finish (ISO 11644:1993)
DIN 50161:1977 Testing of thermal sprayed metal coatings - Determination of shear adhesion
DIN EN 24624:1992 Paints and varnishes; Pull-off test for adhesion
DIN 55436-6:1985-04 Packaging test; tubes made of aluminium; disposition of the adhesive strength of the inside and outside protective lacquer
DIN TS 53263:2020 Footwear - Test methods - Determination of upper-sole adhesion on the whole shoe
DIN /TS 53263:2020 Footwear - Test methods - Determination of upper-sole adhesion on the whole shoe
DIN 50978:1985-10 Testing of metallic coatings; adherence of hot-dip zinc coatings
DIN EN ISO 4624 E:2014 Draft Document - Paints and varnishes - Pull-off test for adhesion (ISO/DIS 4624:2014); German version prEN ISO 4624:2014
DIN ISO 13805:2000-11 Determination of adhesion of enamel layer on aluminum surface - Electrolyte erosion test
DIN EN 13523-20:2020 Coil coated metals - Test methods - Part 20: Foam adhesion
DIN EN 13523-20:2020-08 Coil coated metals - Test methods - Part 20: Foam adhesion; German version EN 13523-20:2020

Association Francaise de Normalisation

NF EN ISO 11644:2022 Leather - Finishing coat adhesion test
NF EN ISO 14916:2017 Thermal projection - Measurement of adhesion by traction tests
NF G52-314*NF EN ISO 11644:2022 Leather - Test for adhesion of finish
XP ISO/TS 4640:2023 Oral medicine - Test methods for tensile adhesion to tooth structure
NF T30-062*NF EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion
NF EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion
NF EN 2828:1993 Série aérospatiale - Essai d'adhérence des revêtements métalliques par brunissage

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 11644:2013 Leather -- Test for adhesion of finish
OS GSO ISO 4746:2013 Oxygen-free copper -- Scale adhesion test
OS GSO ISO 17708:2013 Footwear -- Test methods for whole shoe -- Upper sole adhesion

Danish Standards Foundation

DANSK DS/EN ISO 11644:2009 Leather - Test for adhesion of finish
DANSK DS/EN ISO 4624:2016 Paints and varnishes – Pull-off test for adhesion
DS/EN ISO 11644:2009 Leather - Test for adhesion of finish
DANSK DS/EN ISO 17708:2018 Footwear – Test methods for whole shoe – Upper sole adhesion (ISO 17708:2018)
DANSK DS/ISO 4624:2023 Paints and varnishes – Pull-off test for adhesion
DS/EN ISO 4624:2003 Paints and varnishes - Pull-off test for adhesion
DANSK DS/EN 13523-20:2020 Coil coated metals – Test methods – Part 20: Foam adhesion
DS/EN 13523-20:2012 Coil coated metals - Test methods - Part 20: Foam adhesion

(U.S.) Ford Automotive Standards

FORD FLTM BI 009-05-2001 BEND TEST FOR COATING ADHESION
FORD FLTM BI 106-01-2002 PAINT ADHESION TEST
FORD FLTM BU 012-1-2000 PEEL ADHESION TEST FOR BONDED NAME PLATES OR EXTERIOR TRIM
FORD FLTM BI 106-2-2001 INTERCOAT PAINT ADHESION TEST (Replaces FLTM BI 006-02, FLTM EU-BI 006-02)

Gosstandart of Russia

GOST 10719-1975 Binding materials. Method for the determination of adhesion and thermoadhesion
GOST 14340.2-1969 Enamelled round wires. Methods of the adhesion test
GOST 15140-1986 Paintwork materials. Methods for determination of adhesion
GOST 15140-1978 Paintwork materials. Methods for determination of adhesion

The American Road & Transportation Builders Association

AASHTO TP 89-2010(R2016) Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO TP 89-2010(2016) Standard Method of Test for Measuring Adhesion of Hot-Poured Crack Sealant Using Direct Adhesion Tester
AASHTO T 370-2017 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
AASHTO T 370-2018 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
AASHTO T 370-2022 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester

Spanish Association for Standardization (UNE)

UNE 57139:1986 PRESSURE SENSITIVE MATERIALS. TESTING OF PEEL ADHESION
UNE 36740:1998 ADHERENCE TEST FOR STEEL FOR REINFORCEMENT OF CONCRETE. BEAM TEST.
UNE-EN ISO 11644:2023 Leather - Test for adhesion of finish (ISO 11644:2022)
UNE-EN ISO 11644:2009 Leather - Test for adhesion of finish (ISO 11644:2009)
UNE-EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
UNE-EN ISO 17708:2019 Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2018)
AENOR UNE-EN ISO 4624:2016 Paints and varnishes. Tensile adhesion test. (ISO 4624:2016).
UNE-EN ISO 17708:2004 Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003)
UNE-EN ISO 11644:2004 Leather - Test for adhesion of finish (ISO 11644:1993)
AENOR UNE-EN ISO 14916:2017 Thermal projection. Adhesion measurement by tensile test. (ISO 14916:2017).
UNE-EN ISO 252:2023 Conveyor belts - Adhesion between constitutive elements - Test methods (ISO 252:2023) (Endorsed by Asociación Española de Normalización in May of 2023.)
UNE 7074:1954 DETERMINATION OF ADHERENCE AND COHERENCE OF BITUMINOUS MATERIALS.
UNE-EN ISO 29022:2013 Dentistry - Adhesion - Notched-edge shear bond strength test (ISO 29022:2013)
UNE-EN 13523-20:2012 Coil coated metals - Test methods - Part 20: Foam adhesion
AENOR UNE-EN 13523-20:2012 Coil coated metals - Test methods - Part 20: Foam adhesion
UNE-EN 13523-20:2021 Coil coated metals - Test methods - Part 20: Foam adhesion
UNE 26524:2013 Test procedure for vehicle evaluation in wet proving ground with medium adherence.
UNE-EN 13523-20:2005 Coil coated metals - Test methods - Part 20: Foam adhesion

American Dental Association

ADA 111-2019 Adhesion Test Methods to Tooth Structure

American National Standards Institute （ANSI)

ANSI/ADA 111-2019*ISO TS 11405 Adhesion Test Methods to Tooth Structure

IPC - Association Connecting Electronics Industries

IPC TM-650 2.4.28.1F-2007 Solder Mask Adhesion - Tape Test Method
IPC TM-650 2.4.28.1A-1988 Adhesion@ Solder Mask (Tape Test Method)
IPC TM-650 2.4.1C-1988 Adhesion@ Plating

Society of Automotive Engineers (SAE)

SAE AMS 3721A-2024 Tape for Organic Coatings Adhesion Testing
SAE AMS3721A-2024 Tape for Organic Coatings Adhesion Testing
SAE AMS3721-2017 Tape for Organic Coatings Adhesion Testing

Korean Agency for Technology and Standards (KATS)

KS M 7066-2008 Testing method for ply adhesion of paperboard
KS M ISO 11644-2007(2022) Leather－Test for adhesion of finish
KS M ISO 11644-2007(2017) Leather－Test for adhesion of finish
KS M 5981-2001 Testing Method for cross cut of film of paints
KS M ISO 11644-2023 Leather — Test for adhesion of finish
KS L 2108-2021 Testing methods for adhesion of thin films on glass substrate
KS M 6787-1999 Adhesion testing methods for vulcanized rubber
KS K 0533-2014 Test method for adhesion of coated fabric
KS D 0254-2022 Methods of adhesion test for metallic coating
KS M 6787-2014 Adhesion testing methods for vulcanized rubber
KS D 0254-2001(2022) Methods of adhesion test for metallic coating
KS M 6787-1994 Adhesion testing methods for vulcanized rubber
KS M 7052-2021 Testing method for adhesion of corrugated fiberboard
KS M ISO 4624-2017 Paints and varnishes－Pull-off test for adhesion
KS M ISO 4624-2022 Paints and varnishes－Pull-off test for adhesion
KS M ISO 4647:2014 Rubber, vulcanized — Determination of static adhesion to textile cord — H-pull test
KS M ISO 17708-2019 Footwear－Test methods for whole shoe－Upper sole adhesion
KS M ISO 4624-2017(2022) Paints and varnishes－Pull-off test for adhesion
KS M ISO 17708:2019 Footwear－Test methods for whole shoe－Upper sole adhesion
KS P ISO TS 11405:2019 Dentistry — Testing of adhesion to tooth structure
KS P ISO TS 11405:2004 Dental materials－Testing of adhesion to tooth structure
KS M ISO 22650:2008 Footwear－Test methods for whole shoe－Heel attachment
KS L 2107-2019 Testing methods for the adhesion of silica coating to the glass substrate
KS P ISO TS 11405-2019 Dentistry — Testing of adhesion to tooth structure
KS L ISO 20502-2012(2022) Fine ceramics－Determination of adhesion of ceramic coatings by scratch testing

AASHTO - American Association of State Highway and Transportation Officials

T 370-2017 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester
T 370-2018 Standard Method of Test for Measuring Adhesion of Hot-Poured Asphalt Crack Sealant Using Direct Adhesion Tester

CZ-CSN

CSN 77 0863-1987 Determination of the initial adhesive force
CSN 91 0210 Cast.12-1979 Testing of furniture surface coating. Coat adhesion
CSN 34 7010 Cast.21-1972 Flexibility and adherence test of enamelled round wire insulation

Standards Norway

NS-EN ISO 11644:2009 Leather — Test for adhesion of finish (ISO 11644:2009)
NS-EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)
NS-EN ISO 17708:2018 Footwear — Test methods for whole shoe — Upper sole adhesion (ISO 17708:2018)
NS-ISO 4624:1978 Paints and varnishes — Pull-off test for adhesion
NS-EN ISO 11644:2003 Leather — Test for adhesion of finish (ISO 11644:1993)
NS-EN ISO 11644:2022 Leather - Test for adhesion of finish (ISO 11644:2022)
NS 8030-1983 Surface coatings - Determination of adhesion - Cross-cut method

Lithuanian Standards Office

LST EN ISO 11644:2009 Leather - Test for adhesion of finish (ISO 11644:2009)
LST EN ISO 17708:2003 Footwear - Test methods for whole shoe - Upper sole adhesion (ISO 17708:2003)
LST EN ISO 4624:2003 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2002)
LST EN 13523-20-2012 Coil coated metals - Test methods - Part 20: Foam adhesion

ECIA - Electronic Components Industry Association

216-1959 Adhesion of Printed Wiring@ Method of Test for
339-1967 Layer-To-Layer Adhesion of Magnetic Tape@ Recommended Test Method

GM Europe

GME 4667-2004 Test of Coating Adherence in Catalytic Converters (English/German; Includes Appendix A)
GME 60295 PART 9-2013 Methods of Test for Sound Deadener Pads, Part 9: Test for Adhesion (Issue 2; English/German; This standard may be applied only for current programs. It is inactive for all future projects and without replacement)
GME 60410-2009 Adhesion of Organic Coatings after Storage in Warm Water - Delamination Test

Ente Nazionale Italiano di Unificazione

UNI EN ISO 11644:2022 Leather - Test for adhesion of finish
UNI EN ISO 11644:2009 Leather - Test for adhesion of finish
UNI 8883:1986 Porcelain enamels. Testing the adhesion of enamels to thin steel sheet
UNI 8574-6:1984 Tin can lacquers. Test methods. Determination of film adhesion.
EC 1-2024 UNI 9240:2016 Furniture - Pull off test for surface adhesion
UNI EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion
UNI EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion
UNI EN 12785:2001 Footwear - Test methods for whole shoe - Heel attachment
UNI EN 582:1994 Thermal spraying. Determination of tensile adhesive strenght.
UNI EN ISO 17708:2018 Footwear - Test methods for whole shoe - Upper sole adhesion
UNI EN ISO 17708:2004 Footwear - Test methods for whole shoe - Upper sole adhesion

Australian/New Zealand Standard (AU-AS/NZS)

AS/NZS 4275.6:1995 Methods of testing underground marking tape - Adhesion of print
AS/NZS 1580.408.5:1994 Paints and Related Materials - Methods of Test Method 408.5: Adhesion - Pull-Off Test

VN-TCVN

TCVN 2097-1993 Paints.Gross cut test for the determination of adhesion

Institute of Interconnecting and Packaging Electronic Circuits (IPC)

IPC TM-650 2.4.10-1973 Plating Adhesion
IPC TM-650 2.4.1-2004 Adhesion, Tape Testing Revision E

BE-NBN

NBN 813-12-1970 Shear adhesion
NBN 813-05-1969 Remove adhesion
NBN 813-06-1969 bending adhesion
NBN 895-1970 Measurement of the adhesion of steel bars or wires to concrete by a pull-out test (pull-out test)
NBN T 31-008-1988 Rubber, vulcanized - Determination of adhesion to metal- One-plate method
NBN T 31-017-1988 Rubber, vulcanized - Derermination of adhesion to metal- Two-plate method

Standard Association of Australia （SAA）

AS K173.4:1971 Methods for testing electroplated coatings - Adhesion tests
AS 3894.9:2003(R2013) Field test adhesion of protective coatings
AS 1580.408.2:1993 Paints and related materials - Methods of test, Method 408.2: Adhesion - Knife test
AS 1580.408.2:1984 Paints and related materials - Methods of test, Method 408.2: Adhesion - Knife test
AS 1580.408.4:1993 Paints and related materials - Methods of test Method 408.4: Adhesion(cross-cut)

Japanese Industrial Standards Committee (JISC)

JIS Z 8845:2021 Determination of particle adhesion force by centrifugal method
JIS K 6256:1993 Adhesion testing methods for vulcanized rubber
JIS H 8504:1996 Methods of adhesion test for metallic coatings
JIS K 6557-9:2018 Leather -- Physical and mechanical tests -- Determination of adhesion of finish
JIS Z 0402:1995 Test method for adhesion of corrugated fibreboard

European Committee for Standardization (CEN)

EN ISO 4624:2023 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2023)
FprEN ISO 4624 Paints and varnishes - Pull-off test for adhesion (ISO/FDIS 4624:2023)

GM Global

GMW 14829-2012 Tape Adhesion Test for Paint Finishes Issue 3; English
GMW 14704-2019 Adhesion test procedure for organic coatings after storage in warm water

SE-SIS

SIS 16 22 18-1967 Rubber. Determination of the adhesion to tiro metal plates. Tensile test
SIS 18 41 72-1967 Paints. Determination of adhesion. Cross-cut method