Electronic scale calibration tolerance

Electronic scale calibration tolerance, Total:49 items.

The international standard classification for "Electronic scale calibration tolerance" includes: Animal feeding stuffs , Power stations in general , Energy and heat transfer engineering in general .

The Chinese standard classification for "Electronic scale calibration tolerance" includes: Livestock and poultry feed and additive , Basic standards and general methods , .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12325-2003 Power quality--Admissible deviation of supply voltage
GB/T 18823-2002(XG1-2003) Allowable error for judge of quality testing results in feeds AMD 1
GB 12325-1990 Quality of electric energy supply--Admissible deviation of supply voltage
GB/T 18823-2010 Permitted tolerants for judgement of testing results in feeds
GB/T 18823-2002 Allowable error for judge of quality testing results in feeds
GB/T 15945-1995 Quality of electric energy supply Permissible deviation of frequency for power system

T/FJSJLXH 001-2023 Rapid calibration and intermediate checks of indication errors in electronic truck scales

JIS Z 8402:1991 General rules for permissible tolerance of chemical analyses and physical tests
JIS G 0321:1966 Product analysis and its tolerance for wrought steel
JIS G 3192:2005 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3192:2008 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3194:1966 Shape dimensions, weight and tolerance of hot rolled flats steel
JIS G 3192:2014 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3192:1994 Dimensions, mass and permissible variations of hot rolled steel sections
JIS G 3192 ERRATUM 1:2000 Dimensions, moss and permissible variations of hot rolled steel sections (Erratum 1)
JIS G 3193:2005 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips
JIS G 3192:2021 Dimensions, shape, mass and permissible variations of hot rolled steel sections
JIS G 3193:2008 Dimensions, mass and permissible variations of hot rolled steel plates, sheets and strips
JIS G 3191:1966 Shape, dimensions, weight and tolerance for hot rolled steel bar and bar-in-coil
JIS G 3193:2019 Dimensions, shape, mass and permissible variations of hot rolled steel plates, sheets and strips

STAS 930-1975 ELECTRIC SYSTEMS Rated voltages and permissible deviations
STAS 7444-1979 SEEDS FOR SOWING Test reports and permissible differences between tests

DIN 862:2015-03 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2011-10 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2005-12 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2014-06 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 862 E:2013-02 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors
DIN 40680-1:1983-08 Ceramic components for electrical purposes; admissible tolerances
DIN 30295-2:1973 Rounded Trapezoidal Threads; Limiting Screw Thread Dimensions and Allowances; Permissible Deviations and Permissible Wear of Thread Gauges
DIN 2270:2017-02 Geometrical product specifications (GPS) - Dial test indicators (lever type) - Maximum permissible errors / Note: Applies in conjunction with DIN EN ISO 9493 (2011-03).

CFR 27-555.50-2014 Alcohol, Tobacco Products and Firearms. Part555:Commerce in explosives. SubpartD:Licenses and Permits. Section555.50:Correction of error on license or permit.

VDI/VDE 3513 BLATT 2-2008 Variable area flowmeter — Error limits G of the device
DIN 862 E:2014 Draft Document - Geometrical product specifications (GPS) - Callipers - Maximum permissible errors

DIN 862:2015 Geometrical product specifications (GPS) - Callipers - Maximum permissible errors

ITU-R S.2099-2016 Allowable short-term error performance for a satellite hypothetical reference digital path
ITU-R S.1062-4 SPANISH-2007 Allowable error performance for a satellite hypothetical reference digital path operating below 15 GHz

ITU-R S.2099-0-2016 Allowable short-term error performance for a satellite hypothetical reference digital path
ITU-R S.1521 FRENCH-2001 Allowable error performance for a hypothetical reference digital path based on synchronous digital hierarchy

GOST 9664-1974 Resistors. Tolerances on rated resistance
GOST 8.051-1981 State system for ensuring the uniformity measurements. Permissible errors of measurement of linear dimensions to 500 mm
GOST 26214-1984 Products of wood and wooden materials. Permissible errors in measuring linear dimensions

ISO 1328-2:1999 Cylindrical Gears - ISO System of Accuracy - Part 2: Definitions and Allowable Values of Deviations Relevant to Radial Composite Deviations and Runout Information

ISO 1328-2:1997 Cylindrical gears - ISO system of accuracy - Part 2: Definitions and allowable values of deviations relevant to radial composite deviations and runout information

SFS 3305-1978 Structural design, determination of points and measurements on site, methods and allowable errors

Others: