Autoclave calibration procedures

Autoclave calibration procedures, Total:105 items.

The international standard classification for "Autoclave calibration procedures" includes: Sterilization and disinfection , Electrical equipments for working in special conditions in general , Measurement of electrical and magnetic quantities , Sterilizing equipment .

The Chinese standard classification for "Autoclave calibration procedures" includes: Public medical equipment , Electromagnetic Measurement , Mechanics Measurement , Length Measurement , Complete equipment for high voltage device , Digital display instrument .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8600-1988 Inspecting method for sterilizing effect of automated autoclave sterilizer
GB 8600-1988 Inspecting method for sterilizing effect of automated autoclave sterilizer

National Metrological Verification Regulations of the People's Republic of China

JJG 563-1988 Verification Regulation of High Voltage Capacitance Bridges
JJG(建材) 120-1998 Verification Regulations for High Pressure Densifier
JJG 496-1996 High Voltage Divider at Power Frequency
JJG 683-1990 Barometric Altimeter
JJG 1072-2011 High Voltage and Value D.C.Resistors
JJG(电子) 03012-1995 Verification Regulations for SBE-6 Two-Trace High Voltage Oscilloscope
JJG 585-1989 Verification Regulation of Water Meters at High Pressure
JJG 1075-2012 High Voltage Standard Capacitors

Professional Standard - Commodity Inspection

SN/T 3061-2011 Rules of the Inspection of Packaging for Import Terminally Sterilized Medical Devices

Professional Standard - Military and Civilian Products

WJ 2434-1997 Static verification regulations for high-pressure sensors

Military Standard of the People's Republic of China-General Armament Department

GJB 8879-2016 Calibration procedures for DC high voltage stabilized voltage sources
GJB/J 2659-1996 1~100kV DC high voltage standard voltage divider calibration procedures
GJB 1726A-2021 Standard hydrophone calibration procedures for 20Hz to 200kHz under high hydrostatic pressure

Professional Standard - Electricity

DL/T 979-2005 Verification regulation of high voltage D.C. resistance box
DL/T 973-2005 Verification regulation of digital high voltmeter

Professional Standard - Medicine

YY 0085.2-1992 Forevacuum pressure steam sterilizer
YY 1007-2005 Vertical mode steam sterilizers
YY 0504-2005 Portable Mode Steam Sterilizers
YY/T 0646-2022 Small steam sterilizers

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2176-2004 Rules of Disinfecting Sterilization in Medical Institute on Plateau

Anhui Provincial Standard of the People's Republic of China

DB34/T 2976-2017 High-pressure accumulator on-line inspection regulations

Group Standards of the People's Republic of China

T/CAMDI 056-2020 Ethylene oxide sterilization process practice of sterile medical device

未注明发布机构

AS 4489.4.3:1997(R2016) Test methods for limes and limestones - Soundness - Autoclave

BR-ABNT

ABNT EB-131-1960 Copper autoclave

SCC

BS 2646-1:1988 Autoclaves for sterilization in laboratories-Specification for design and construction
NS-EN 12347:1998 Biotechnology — Performance criteria for steam sterilizers and autoclaves
DANSK DS/EN 12347:1998 Biotechnology - Performance criteria for steam sterilizers and autoclaves
BS 3213:1960 Specification for hospital pressure sterilizers for water
BS 3970-2:1966 Specification for steam sterilizers-Sterilizers for bottled fluids
BS 3970-1:1966 Specification for steam sterilizers-Sterilizers for porous loads
AENOR UNE 25038-2:1970 Washing registers, autoclaves, for locomotive boilers. Details.
CSA C22.2 No.189-1979 High-voltage insect killers
CAN/CSA C22.2 No.189-M89-1989(R2013) High-Voltage Insect Killers
AENOR UNE 25038-1:1970 Washing registers, autoclaves, for locomotive boilers. General layout.
UNE-EN 866-3:1997 BIOLOGICAL SYSTEMS FOR TESTING STERILIZERS AND STERILIZATION PROCESSES. PART 3: PARTICULAR SYSTEMS FOR USE IN MOIST HEAT STERILIZERS.
BS EN ISO 14937:2001 Sterilization of health care products. General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
NS-EN 866-3:1997 Biological systems for testing sterilizers and sterilization processes — Part 3: Particular systems for use in moist heat sterilizers
BS 3281:1960 Specification for rectangular metal boxes for use in high vacuum steam sterilizers

CU-NC

NC 57-70-1985 Table Autoclave Quality Specifications

ZA-SANS

SANS 40:2009 Manually operated medium-vacuum sterilizers (autoclaves)
SANS 982:2009 High-pressure high-vacuum steam sterilizers (autoclaves)
SANS 982:1990 High-pressure high-vacuum steam sterilizers (autoclaves)
CKS 224-1970 Autoclave indicator tape
SANS 40:1973 Manually operated medium-vacuum sterilizers (autoclaves)
SANS 981:1973 High-pressure down-draught steam sterilizers (autoclaves) (with independent steam supply)

British Standards Institution (BSI)

BS 2646-2:2023 Autoclaves for sterilization in laboratories - Planning and installation. Code of practice
BS 2646-4:1991(2011) Autoclaves for sterilization in laboratories — Part 4 : Guide to maintenance
BS 2646-3:2023 Autoclaves for sterilization in laboratories - Safe use and operation. Code of practice
BS EN 12347:1998 Biotechnology - Performance criteria for steam sterilizers and autoclaves
BS 2646-5:1993(2011) Autoclaves for sterilization in laboratories — Part 5 : Methods of test for function and performance
23/30455073 DC BS 2646-2. Autoclaves for sterilization in laboratories. Part 2. Planning and installation. Code of Practice
20/30394635 DC BS 2646-1. Autoclaves for sterilization in laboratories. Part 1. Design, construction, safety and performance. Specification
BS EN 866-2:1998 Biological systems for testing sterilizers and sterilization processes - Particular systems for use in ethylene oxide sterilizers
BS EN 15424:2007 Sterilization of medical devices. Low temperature steam and formaldehyde. Requirements for development, validation and routine control of a sterilization process for medical devices
BS EN ISO 17665-1:2006 Sterilization of health care products - Moist heat - Requirements for the development, validation and routine control of a sterilization process for medical devices
23/30455075 DC BS 2646-3. Autoclaves for sterilization in laboratories. Part 3. Safe use and operation. Code of Practice

PL-PKN

PN M71061-1969 Enameled cast-iron autoclaves

Association Francaise de Normalisation

NF EN 1353:1997 Détermination du taux d'humidité du béton cellulaire autoclavé
NF EN 12347:1998 Biotechnology - Equipment - Performance criteria for steam sterilizers and autoclaves
NF X42-124*NF EN 12347:1998 Biotechnology. Performance criteria for steam sterilizers and autoclaves.
NF EN ISO 11737-2:2020 Sterilization of health products - Microbiological methods - Part 2: sterility checks carried out during the definition, validation and maintenance of a sterilization process

Korean Agency for Technology and Standards (KATS)

KS P 6102-2019 High-pressure steam sterilizers for medical use
KS C IEC PAS 62172-2003(2008) Accelerated moisture resistance－Unbiased autoclave
KS P 6102-2009(2019) High-pressure steam sterilizers for medical use
KS C IEC PAS 62172-2013 Accelerated moisture resistance－Unbiased autoclave
KS P ISO 11737-2:2018 Sterilization of medical devices — Microbiological methods — Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process

Japanese Industrial Standards Committee (JISC)

JIS T 7322:1989 High-pressure steam sterilizers for medical use
JIS T 7324:1989 High-pressure steam sterilizers for medical use (small size)
JIS T 7322:2005 High-pressure steam sterilizers for medical use
JIS T 7324:2005 High-pressure steam sterilizers for medical use (Small size)

Lithuanian Standards Office

LST EN 12347-2000 Biotechnology - Performance criteria for steam sterilizers and autoclaves

Danish Standards Foundation

DS/EN 12347:1998 Biotechnology - Performance criteria for steam sterilizers and autoclaves

German Institute for Standardization

DIN EN 12347:1998-06 Biotechnology - Performance criteria for steam sterilizers and autoclaves; German version EN 12347:1998
DIN EN ISO 13402:2001-02 Surgical and dental hand instruments - Determination of resistance against autoclaving, corrosion and thermal exposure (ISO 13402:1995); German version EN ISO 13402:2000

AENOR

UNE-EN 12347:1998 Biotechnology - Performance criteria for steam sterilizers and autoclaves

Military Standards (MIL-STD)

DOD A-A-54708-1992 STERILIZER, SURGICAL INSTRUMENT AND DRESSING (AUTOCLAVE)

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD22-A102D-2010 Accelerated Moisture Resistance - Unbiased Autoclave
JEDEC JESD22-A102E-2015 Accelerated Moisture Resistance - Unbiased Autoclave

IN-BIS

IS 4510-1978 Standard pressure type of horizontal cylindrical high-speed steam sterilizer
IS 3829 Pt.3-1985 Specifications for steam sterilizers Part 3 Pressure sterilizers, vertical cylindrical type
IS 7455-1974 Sterilizer, pressure, hot and cold water specifications
IS 8462-1977 Specification for portable, vertical and pressure sterilizers
IS 6041-1985 Specification for construction of autoclaved porous concrete block masonry

American Society for Testing and Materials (ASTM)

ASTM E1522-93(2019) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM E1522-93(1997) Standard Specification for Autoclavable Protective Coatings on Laboratory Glassware
ASTM C1693-11(2017) Standard Specification for Autoclaved Aerated Concrete (AAC)
ASTM D4199-82(1998) Standard Test Methods for Autoclavability of Membrane Filters

International Electrotechnical Commission (IEC)

IEC PAS 62172:2000 Accelerated moisture resistance - Unbiased autoclave

BELST

STB 1913-2008 Autoclaves for building industry . Requirement to the technical diagnostics procedure

RO-ASRO

STAS 2832-1971 PORTLAND CEMENT Determination of the volume constant by the autoclave method
STAS 11359/10-1981 NATIVE SULPHUR ORES AND CONCENTRATES Acidity determination

IEC - International Electrotechnical Commission

PAS 62172-2000 Accelerated Moisture Resistance - Unbiased Autoclave (; Edition 1.0)

International Organization for Standardization (ISO)

ISO 11737-2:2019 Sterilization of health care products — Microbiological methods — Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process

DE-GPVA

AD 2000-Merkblatt HP801 No.30-2002 Manufacture and testing of pressure vessels.Special pressure vessels.Autoclaves for masonry blocks

KR-KS

KS P ISO 11737-2-2018 Sterilization of medical devices — Microbiological methods — Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process

GB-REG

REG NASA-LLIS-1383-2003 Lessons Learned ?Autoclave Purge Blower Failure

European Committee for Standardization (CEN)

EN 866-2:1997 Biological Systems for Testing Sterilizers and Sterilization Processes - Part 2: Particular Systems for Use in Ethylene Oxide Sterilizers
EN ISO 25424:2011 Sterilization of medical devices - Low temperature steam and formaldehyde - Requirements for development, validation and routine control of a sterilization process for medical devices

US-FCR

FCR UFGS-03 44 00-2013 REINFORCED AUTOCLAVE AERATED CONCRETE PANELS

U.S. Military Regulations and Norms

ARMY UFGS-03 44 00-2013 REINFORCED AUTOCLAVE AERATED CONCRETE PANELS

GSO

GSO ISO 14937:2015 Sterilization of health care products -- General requirements for characterization of a sterilizing agent and the development, validation and routine control of a sterilization process for medical devices
GSO ISO 11737-2:2015 Sterilization of medical devices -- Microbiological methods -- Part 2: Tests of sterility performed in the definition, validation and maintenance of a sterilization process

Standard Association of Australia （SAA）

AS 4489.4.3:1997 Test methods for limes and limestones - Soundness - Autoclave