Particle size of glass powder

Particle size of glass powder, Total:231 items.

The international standard classification for "Particle size of glass powder" includes: Raw materials and raw glass , Cement. Gypsum. Lime. Mortar , Temperature-measuring instruments , Geology. Meteorology. Hydrology , Diagnostic equipment , Glass in general , Thermodynamics and temperature measurements , Medical Sciences and health care facilities in general .

The Chinese standard classification for "Particle size of glass powder" includes: Ceramic and glass in general , Technical Management , Special electronic technology material , Technical management , Cement , Meteorological instrument , General examination instrument , Laboratory glass, ceramic and plastic vessel , Thermal Measurement , Temperature and pressure instrument , Electrical insulating material and its products , Pharmaceutical processing machinery and equipment , Marking, packaing, transport and storage .

Professional Standard - Building Materials

JC/T 650-1996 Determination method for particle size of glass raw materials
JC/T 2673-2022 Vanadium dioxide ceramic powders for glass films
JC/T 2792-2023 Dolomite powder for glass fibre
JC/T 650-2023 Method for the determination of granularity of glass raw materials

未注明发布机构

DIN ISO 719 E:2021-06 Glass - Hydrolytic resistance of glass grains at 98 °C - Method of test and classification
DIN ISO 720 E:2021-06 Glass - Hydrolytic resistance of glass grains at 121 °C - Method of test and classification
JIS R 3111-4:2023 Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass
DIN 12770 Beiblatt 1:1982 Laboratory glassware; liquid-in-glass thermometers; general requirements; additional remarks
CAN/CSA-ISO 17830:2017 Solid biofuels — Particle size distribution of disintegrated pellets

Professional Standard - Electron

SJ/T 3231-2005 Frit glass powder
SJ 1269-1977 Through-hole glass power insulators,Type FBJ
SJ 3232.1-1989 Test method for softening temperature of low-melting welding glass powder
SJ/T 10424-1993 Glass powder for passivation packaging for use in semiconductor devices
SJ/T 10722-1996 Zircon power for use in electronic glass
SJ 3231-1989 Low melting welding glass powder

Group Standards of the People's Republic of China

T/CECS 10288-2023 Glass powder used for cement and concrete
T/IFP 003-2021 Alumina Powder for Solar Photovoltaic Glass

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8747-2010 Meteorological liquid-in-glass thermometer
GB/T 8747-1988 Meteorological liquid-in-glass thermometer
GB 1588-2001 Clinical thermometer

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 6582-2021 Glass—Hydrolytic resisitance of glass grains at 98℃—Method of test and classification

National Metrological Verification Regulations of the People's Republic of China

JJG 130-2004 Liquid-in-Glass Thermometers for Working
JJG 111-2003 Verification Regulation of the Clinical Thermometers
JJG 111-2019 Clinical thermometers

Professional Standard - Machinery

JB/T 6488.3-1992 Mica Tape - Epoxy Glass Powder Mica Tape
JB 20008.2-2004 Antibiotics vial powder - Filling machine
JB/T 9262-1999 Liquid-in-glass industrial thermometers and laboratorial thermometers

未注明发布机构

DIN ISO 720 E:2021-06 Glass - Hydrolytic resistance of glass grains at 121 °C - Method of test and classification
DIN 12770 Beiblatt 1:1982 Laboratory glassware; liquid-in-glass thermometers; general requirements; additional remarks
DIN ISO 719 E:2021-06 Glass - Hydrolytic resistance of glass grains at 98 °C - Method of test and classification
CAN/CSA-ISO 17830:2017 Solid biofuels — Particle size distribution of disintegrated pellets
JIS R 3111-4:2023 Glass in building -- Determination of the bending strength of glass -- Part 4: Testing of channel shaped glass

国家医药管理局

YY 0234.1-1995 Production line for injection vials powder filling

工业和信息化部

JB/T 13477-2018 200 Class glass-backed mica paper with a silicone

Professional Standard - Pharmaceutical Packaging

YBB 0036-2004 Boli Keli Zai 98℃ Naishuixing Cedingfa Tests for hydrolytic resistance of glass grains at 98℃

AENOR

UNE 43751:1978 GLASS RAW MATERIALS. GRANULOMETRIC TEST
UNE 400322:1999 GLASS. HYDROLYTIC RESISTENCE OF GLASS GRAINS AT 98 oC. METHOD OF TEST AND CLASSIFICATION.
UNE 400323:1999 GLASS. HYDROLITIC RESISTANCE OF GLASS GRAINS AT 121 oC. METHOD OF TEST AND CLASSIFICATION.
UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.

SE-SIS

SIS SS 13 63 23-1982 Glass — Determination of the hydrolytic resistance of glass grains at 121 C
SIS SS 13 63 21-1982 Glass — Determination of the hydrolytic resistance of glass grams at 98℃
SIS 13 63 21-1970 Glass. Determination of the hydrolytic, resistanre of glass grains
SIS SS 87 562 46-1986 Dental glass polyalkenoate cements
SIS SS 22 44 27-1986 Building glass - Safety glazing - Hard body impact testing

ES-UNE

UNE 43751:1978 ERRATUM GLASS RAW MATERIALS. GRANULOMETRIC TEST
ISO/DIS 17830:2023 Solid biofuels — Particle size distribution of disintegrated pellets
UNE-EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)

Korean Agency for Technology and Standards (KATS)

KS B 5302-1983 Etched-stem liquid-in glass thermometer
KS B 5218-1983 Etched-Stem liquid-in-glass wet & dry thermometer
KS A 0512-2019 Method of temperature measurement by liquid-in-glass thermometers
KS A 0512-2009 Method of temperature measurement by liquid-in-glass thermometers
KS L ISO 719:2012 Glass-Hydrolytic resistance of glass grains at 98 ℃-Method of test and classification
KS B 5217-1990 Bimetallic thermometers for atmospheric temperature
KS L ISO 719:2022 Glass — Hydrolytic resistance of glass grains at 98 ℃ — Method of test and classification
KS L ISO 719-2012(2017) Glass－Hydrolytic resistance of glass grains at 98 ℃－Method of test and classification
KS B 5302-2021 Etched-stem liquid-in glass thermometer
KS A 0512-1994 Method of temperature measurement by liquid-in-glass thermometers
KS A 0512-2009(2019) Method of temperature measurement by liquid-in-glass thermometers
KS L ISO 9385:2010 Testing method for knoop indentation hardness of glass and glass-ceramics
KS B 5302-1983(2016) Etched-stem liquid-in glass thermometer
KS B 5218-1983(2021) Etched-Stem liquid-in-glass wet & dry thermometer
KS B 5314-1986 Liquid-in-glass thermometers for testing of petroleum products
KS L 2102-2000 Testing method for knoop indentation hardness of glass and glass-ceramics
KS L ISO 9385-2010(2020) Testing method for knoop indentation hardness of glass and glass-ceramics
KS L 2102-1980 Testing method for knoop indentation hardness of glass and glass-ceramics

GSO

BH GSO ISO 17830:2022 Solid biofuels — Particle size distribution of disintegrated pellets
GSO ISO 17830:2021 Solid biofuels — Particle size distribution of disintegrated pellets
OS GSO OIML R133:2008 Liquid-in-Glass Thermometers
GSO ISO 20492-3:2013 Glass in buildings -- Insulating glass -- Part 3: Gas concentration and gas leakage
BH GSO ISO 20492-3:2016 Glass in buildings -- Insulating glass -- Part 3: Gas concentration and gas leakage
OS GSO ISO 719:2010 Glass -- Hydrolytic resistance of glass grains at 98 degrees C -- Method of test and classification
GSO ISO 719:2010 Glass -- Hydrolytic resistance of glass grains at 98 degrees C -- Method of test and classification
OS GSO ISO 720:2010 Glass -- Hydrolytic resistance of glass grains at 121 degrees C -- Method of test and classification
GSO ISO 720:2010 Glass -- Hydrolytic resistance of glass grains at 121 degrees C -- Method of test and classification
GSO ISO 1288-4:2021 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
GSO ISO 720:2013 Glass - Hydrolytic resistance of glass grains at 121 degrees C - Method of test and classification
BH GSO ISO 1288-1:2022 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
BH GSO ISO 1288-4:2022 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
GSO ISO 1288-1:2021 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
BH GSO ISO 9385:2022 Glass and glass-ceramics — Knoop hardness test
GSO ISO 9385:2021 Glass and glass-ceramics — Knoop hardness test

IT-UNI

UNI 5302-1963 Glass products for technology and hygiene. Determination of hydrolytic strength of glass powder at 100°C
UNI 5303-1973 Technology, medicinal and sanitary glass products. Determination of hydrolytic strength of glass (powder) mass at 121°C

American Society for Testing and Materials (ASTM)

ASTM E2651-08 Standard Guide for Powder Particle Size Analysis
ASTM E1-14 Standard Specification for ASTM Liquid-in-Glass Thermometers
ASTM E1-14(2020) Standard Specification for ASTM Liquid-in-Glass Thermometers

International Organization for Standardization (ISO)

ISO/FDIS 17830:2023 Solid biofuels — Particle size distribution of disintegrated pellets
ISO/DIS 20492-3:2023 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage
ISO 20492-3:2010 Glass in buildings - Insulating glass - Part 3: Gas concentration and gas leakage
ISO/CD 20492-3 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage
ISO 720:1985 Glass; Hydrolytic resistance of glass grains at 121 degrees C; Method of test and classification
ISO 719:1985 Glass; Hydrolytic resistance of glass grains at 98 degrees C; Method of test and classification
ISO 720:1981 Glass — Hydrolytic resistance of glass grains at 121 degrees C — Method of test and classification
ISO 720:2020 Glass — Hydrolytic resistance of glass grains at 121 °C — Method of test and classification
ISO 719:1981 Glass — Hydrolytic resistance of glass grains at 98 degrees C — Method of test and classification
ISO 5532:1980 Durum wheat — Determination of proportion of non-wholly vitreous grains (Reference method)
ISO 18846:2016 Solid biofuels - Determination of fines content in samples of pellets
ISO 1288-4:2016 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
ISO 9385:1990 Glass and glass-ceramics; Knoop hardness test
ISO 1288-1:2016 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass

Association Francaise de Normalisation

NF V03-721:1994 Semolina {durum} wheat. Granulation of semolina.
NF ISO 719:2020 Verre - Résistance hydrolytique du verre en grains à 98 oC - Méthode d'essai et classification
NF ISO 720:2020 Verre - Résistance hydrolytique du verre en grains à 121 oC - Méthode d'essai et classification
NF P78-401:1988 Glass and glazing. Glazing resistance to firearm projectiles. Shooting test on glazing.
NF B30-010:1967 Glass. Vocabulary of characteristic temperatures related to glass viscosities.
NF S90-071:2020 Glass - Hydrolytic resistance of glass grains at 98 oC - Method of test and classification
NF B30-106:1986 Glass. Hydrolytic resistance of glass grains at 98 degrees Celsius. Method of test and classification.
NF S90-072:2020 Glass - Hydrolytic resistance of glass grains at 121 oC - Method of test and classification
NF X11-666:1984 PARTICLE SIZE ANALYSIS OF POWDERS. DIFFRACTION METHOD.
NF B30-107:1986 Glass. Hydrolytic resistance of glass grains at 121 degrees Celsius. Method of test and classification.
NF ISO 9385:1991 Glass and glass ceramics - Knoop hardness test
NF P98-643:1993 Horizontal road signs. Road markings. Separating method of glass particles in marking products : dense liquid method.
NF S10-015*NF ISO 9385:1991 Glass and glass ceramics. Knoop hardness test D.
NF P78-341*NF EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1 : fundamentals of testing glass.
NF B30-004:1974 GLASS.CRYSTAL,CRYSTAL GLASS,CRYSTALLIN.
NF B35-515:1983 Laboratory glassware. Glass alcoholometers and alcohol hydrometers not incorporating a thermometer.
NF EN 60672-3:1998 Insulating materials based on ceramic or glass - Part 3: specifications for particular materials

HU-MSZT

MSZ 11210-1968 Glass Thermometer Liquid Filled Industrial Glass Thermometer Protective Accessories
MSZ 11237-1967 Glass Thermometer Liquid Fill Thermometer
MSZ MI 11210/1-1972 MSZ 11210/1-72 liquid-filled glass temperature measuring instrument, industrial glass thermometer
MSZ KGST 205-1975 Glass particle diamond drill bits
MNOSZ 21401-1955 Bonded, particle-free flat glass

German Institute for Standardization

DIN EN ISO 17830:2023-02 Solid biofuels - Particle size distribution of disintegrated pellets (ISO/DIS 17830:2023); German and English version prEN ISO 17830:2023 / Note: Date of issue 2023-01-06*Intended as replacement for DIN EN ISO 17830 (2016-11).
DIN 52341:1993 Testing of glass; chemical analysis of lead crystal glass and crystal glass
DIN 12769:1980 Liquid-in-glass thermometers; survey
DIN 12770:1982-08 Laboratory glassware; liquid-in-glass thermometers; general requirements
DIN 12770:1982 Laboratory glassware; liquid-in-glass thermometers; general requirements
DIN ISO 719:1989 Glass; hydrolytic resistance of glass grains at 98 °C; method of test and classification; identical with ISO 719:1985
DIN EN ISO 17830:2016-11 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016); German version EN ISO 17830:2016 / Note: To be replaced by DIN EN ISO 17830 (2023-02).
DIN ISO 720:1989 Glass; Hydrolytic resistance of glass grains at 121 °C; method of test and classification; identical with ISO 720:1985
DIN ISO 720:2021-12 Glass - Hydrolytic resistance of glass grains at 121 °C - Method of test and classification (ISO 720:2020)
DIN ISO 719:2021-12 Glass - Hydrolytic resistance of glass grains at 98 °C - Method of test and classification (ISO 719:2020)
DIN EN 1288-4:2000-09 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass; German version EN 1288-4:2000 / Note: To be replaced by DIN EN ISO 1288-4 (2007-10).
DIN 12770 Beiblatt 1:1982-08 Laboratory glassware; liquid-in-glass thermometers; general requirements; additional remarks
DIN 12770 Bb.1:1982 Laboratory glassware; liquid-in-glass thermometers; general requirements; additional remarks
DIN ISO 719:2021 Glass - Hydrolytic resistance of glass grains at 98 °C - Method of test and classification (ISO 719:2020)
DIN EN 17978:2023-05 Products used for treatment of water intended for human consumption and swimming pool water - Glass beads and glass granulate; German and English version prEN 17978:2023 / Note: Date of issue 2023-04-14
DIN EN 1288-1:2000-09 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass; German version EN 1288-1:2000 / Note: To be replaced by DIN EN ISO 1288-1 (2007-10).
DIN ISO 720:2021 Glass - Hydrolytic resistance of glass grains at 121 °C - Method of test and classification (ISO 720:2020)
DIN ISO 9385:1991 Glass and glass-ceramics; Knoop hardness test; identical with ISO 9385:1990
DIN 52313:1978 Testing of glass; determination of the resistance of glass products to thermal shock

SCC

UNE 135287:2003 Road signalisation equipment. Horizontal signalisation. Glass beads. Granulometry and percentage of defective glass beads.
AENOR UNE 43023:1953 GLASS. SAFETY GLASS. INFLUENCE OF HUMIDITY ON LAMINAR GLASS
NS-EN 16126:2012 Solid biofuels — Determination of particle size distribution of disintegrated pellets
AENOR UNE-EN ISO 17830:2016 Solid biofuels - Particle size distribution of disintegrated pellets (ISO 17830:2016)
NS-EN ISO 17830:2016 Solid biofuels — Particle size distribution of disintegrated pellets (ISO 17830:2016)
UNE 135287:2006 Road signalisation equipment. Horizontal signalisation. Glass beads. Granulometry and percentage of defective glass beads.
SAE AMSG25667-1999 Glass, Monolithic, Aircraft Glazing
DANSK DS/ISO 720:2020 Glass – Hydrolytic resistance of glass grains at 121 °C – Method of test and classification
DANSK DS/ISO 719:2020 Glass – Hydrolytic resistance of glass grains at 98 °C – Method of test and classification
BS 3473-3:1982 Chemical resistance of glass used in the production of laboratory glassware-Method for determination of hydrolytic resistance of glass grains at 121°C
BS 3473-2:1982 Chemical resistance of glass used in the production of laboratory glassware-Method for determination of hydrolytic resistance of glass grains at 98°C
08/30167401 DC BS ISO 20492-3. Glass in buildings. Insulating glass. Part 3. Gas concentration and gas leakage
NS-EN 1288-4:2000 Glass in building — Determination of the bending strength of glass — Part 4: Testing of channel shaped glass
DANSK DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
AENOR UNE-EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass.
NS-EN 1288-1:2000 Glass in building — Determination of the bending strength of glass — Part 1: Fundamentals of testing glass
DANSK DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass
AENOR UNE-EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass.
07/30046996 DC BS ISO 1288-4. Glazing in building. Determination of the bending strength of glass. Part 4. Testing of channel shaped glass
DANSK DS/EN ISO 17830:2016 Solid biofuels – Particle size distrstørrelsebution of disintegrated pellets

RU-GOST R

GOST 9553-1974 Silica glass and glass crystal materials. Determinationn of density
GOST ISO 9385-2013 Glass and glass products. Hardness determination method
GOST 12306-1966 Macaroni soft glassy wheat flour. Specificatons
GOST 33559-2015 Glass and glass products. Test method for resistance to soft body
GOST 32281.1-2013 Glass in building. Determination of the bending strength of glass. Part 1. Fundamentals of testing glass
GOST 28498-1990 Liquid-in-glass thermometers. General technical requirements. Methods of test
GOST 9900-1985 Inorganic glass and glasscrystal materials. Methods for the determination of elastic module at cross static bending

GOSTR

GOST 9553-2017 Glass and glass products. Density determination method

Japanese Industrial Standards Committee (JISC)

JIS R 3224-3:2018 Glass in buildings -- Insulating glass -- Part 3: Gas concentration and gas leakage
JIS Z 8705:1992 Method of temperature measurement by liquid-in-glass thermometers
JIS B 7414:2018 Glass thermometers

Indonesia Standards

SNI ISO 20492-3:2014 Glass in buildings — Insulating glass — Part 3: Gas concentration and gas leakage

ES-AENOR

UNE 43 023 Glass. Safety glass, effect of humidity on pressed glass
UNE 43 009 Glass. Flat glass, safety test of flat glass, flatness test

Military Standards (MIL-STD)

DOD A-A-53976-1989 THERMOMETER, SELF-INDICATING, LIQUID IN GLASS

IN-BIS

IS 6274-1971 How to Calibrate a Liquid in Glass Thermometer
IS 4825-1982 Specification for liquid glass solid stem reference thermometers
IS 2627-1979 Glossary of terms related to liquid-in-glass thermometers

VN-TCVN

TCVN 1046-2004 Glass.Hydrolytic resistance of glass grains at 98oC.Method of test and classification
TCVN 7431-2004 Glass.Hydrolytic resistance of glass grains at 121 C.Method of test and classification

British Standards Institution (BSI)

23/30456662 DC BS EN ISO 17830. Solid biofuels. Particle size distribution of disintegrated pellets
BS EN 1288-4:2000 Glass in building - Determination of the bending strength of glass - Testing of channel shaped glass
BS EN 1288-1:2000 Glass in building - Determination of the bending strength of glass - Fundamentals of testing glass
19/30395375 DC BS ISO 719. Glass. Hydrolytic resistance of glass grains at 98 degrees C. Method of test and classification
BS ISO 720:2020 Glass. Hydrolytic resistance of glass grains at 121 °C. Method of test and classification
23/30464012 DC BS ISO 20492-3. Glass in buildings. Insulating glass - Part 3. Gas concentration and gas leakage
BS ISO 719:2020 Glass. Hydrolytic resistance of glass grains at 98 °C. Method of test and classification
BS ISO/TS 12928:1999 Glass in building. Determination of the bending strength of glass. Fundamentals of testing glass
BS EN ISO 18846:2016 Solid biofuels. Determination of fines content in quantities of pellets
19/30395378 DC BS ISO 720. Glass. Hydrolytic resistance of glass grains at 121 degrees C. Method of test and classification
BS ISO 4795:1996 Laboratory glassware. Glass for thermometer bulbs
BS ISO 4795:1997 Laboratory glassware - Glass for thermometer bulbs
BS EN 1279-3:2018 Glass in building. Insulating glass units. Long term test method and requirements for gas leakage rate and for gas concentration tolerances

European Committee for Standardization (CEN)

FprEN ISO 17830 Solid biofuels - Particle size distribution of disintegrated pellets (ISO/FDIS 17830:2024)
EN 1288-1:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 1: Fundamentals of Testing Glass
EN 1288-4:2000 Glass in Building - Determination of the Bending Strength of Glass - Part 4: Testing of Channel Shaped Glass

(U.S.) Ford Automotive Standards

FORD M98G26-A-1990 GLASS POLISHING COMPOUND - POWDER FORM

CZ-CSN

CSN 70 0556-1962 Testing of glass containers. Determination of thickness of glass
CSN 22 4015-1979 Abrasives. Diamond powders. Grain size and granulometric composition
CSN ISO 720:1992 Glass. Hydraulytic resistance of glass at 121 grad C - Method of test and classification
CSN ON 70 4004-1966 Glassware and glass combinations for distilled liquids
CSN ISO 719:1992 Glass. Hydraulytic resistance of glass at 98 grad C - Method of test and classification
CSN 25 8130-1965 Glass thermometers. Laboratory glass thermometers. Solid-stem type
CSN 70 4118-1995 Laboratory glassware,graduated glass measures
CSN 25 8141-1972 Glass thermometers. Laboratory glass thermometers with conical ground glass joint
CSN 70 4118-1984 Graduated glass measures

KR-KS

KS L ISO 719-2022 Glass — Hydrolytic resistance of glass grains at 98 ℃ — Method of test and classification

GOST

GOST R 70629-2023 Wheat. Determination of vitreousness by optical-computer method
GOST ISO 720-2023 Glass. Hydrolytic resistance of glass grains at 121 °C. Method of test and classification
GOST 27544-1987 Liquid glass thermometers. General technical conditions

TR-TSE

TS 766-1969 DETERMINATION OF THE HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 121 °C
TS 905-1971 DETERMINATION OF THE HYDROLYTIC RESISTANCE OF GLASS GRAINS AT 98 °C

RO-ASRO

STAS SR ISO 9385:1990 KNoop hardness test for glass and ceramic glass
STAS 10161-1976 For the glass and fine porcelain industry, Fossil Beani. Powder and granular dolomite in Hargita area
STAS 10956/4-1977 Metal powdersALUMINIUM POWDERS Determination of grain size
STAS 3834-1983 Laboratory glasswere NON GRADUATED GLASS TUBES
STAS 9144/7-1972 ZING POWDER Granulometric analysis

PL-PKN

PN B13041-1988 Hydrometers for measuring of urine density

Danish Standards Foundation

DS/EN 1288-4:2001 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
DS/INSTA 154:1987 Security glazings and safety glazings. Classification of resistance
DS/EN 1288-1:2001 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass

Lithuanian Standards Office

LST EN 1288-4-2002 Glass in building - Determination of the bending strength of glass - Part 4: Testing of channel shaped glass
LST EN 1288-1-2002 Glass in building - Determination of the bending strength of glass - Part 1: Fundamentals of testing glass