Styrene Environmental Quality

Styrene Environmental Quality, Total:402 items.

The international standard classification for "Styrene Environmental Quality" includes: Occupational safety. Industrial hygiene , Ambient atmospheres , Adhesives , Raw materials for rubber and plastics , Rubber , Aromatic hydrocarbons , Thermoplastic materials , Plastics in general , Plastics , Plastics pipes , Latex and raw rubber , Essential oils , Plastics pipes, fittings and valves .

The Chinese standard classification for "Styrene Environmental Quality" includes: Labor sanitation , Analysis methods for toxic substances in atmosphere , Adhesives , Synthetic resin and plastic , Basic standard and general method for synthetic rubber , Basic organic chemicals , Synthetic rubber , Basic standards and general methods for synthetic resin and plastic , Plastic profile , Latex products , Fragrances and flavors .

Group Standards of the People's Republic of China

T/CAMDI 077-2022 Test method for residual of dicyclopentadiene from medical styrenic thermoplastic elastomer gas chromatography method
T/NAIA 0273-2023 divinylbenzene
T/SDAS 791-2024 Recycling styrene
T/ZZB 2752-2022 Styrene for polymerization-specificatioan
T/GDPIA 31-2021 Plastics－Green recycled acrylonitrile-butadiene-styrene (ABS) for air-conditioner
T/GDFDTAEC 04-2022 Determination of Divinylbenzene residue in Plant extract Gas chromatography-Mass spectrometr
T/JSBC 4-2020 Recycled polystyrene compound
T/SBX 13-2018 Ambient Air Quality Toluene and Xylene Limits
T/CIPR 064-2022 Styrene-ethylene-ethylene-propylene block copolymer modified foam
T/GZPPIA 01-2018 Polystyrene buoyancy
T/CPPIA 6-2021 Determination of Hexabromocyclododecane in Expanded Polystyrene and Extruded Polystyrene--Gas Chromatography-Mass Spectrometry
T/NBSL 002-2022 Flame Retardant ABS
T/CASME 480-2023 High molecular weight styrene - maleic anhydride copolymers
T/CSRA 7-2021 Limit of styrene volatilization standards for low styrene emission unsaturated polyester resin
T/JTAIT 10-2021 Infrared spectroscopic method for rapid detection of polyethylene, polypropylene, polystyrene, polyvinyl chloride, ethylene-vinyl acetate copolymer and polyethylene terephthalate in plastic products
T/NJSS 004-2023 Styrene recovery meterial for styrene butadiene rubber plant

中华人民共和国国家卫生和计划生育委员会

GBZ/T 300.68-2017 Determination of toxic substances in workplace air—Part 68: Styrene, methylstyrene and divinyl benzene

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 8657-2000 Rubber, raw styrene-butadiene - Determination of soap and organic -acid content
GB/T 12671-2008 Polystyrene (PS) resin
GB/T 16867-1997 Determination of residual styrene monomer in polystyrene and acrylonitrile-Butadiene-Styrene resins by gas chromatography
GB/T 8657-2014 Styrene-butadiene rubber, raw―Determination of soap and organic-acid content
GB/T 27561-2011 Styrene-butadiene-styrene block copolymers(SBS) adhesives
GB 3915-1998 Styrene for industrial use
GB/T 8803-2001 Injection-moulded unplasticized poly(vinyl chloride)(PVC-U), chlorinated poly(vinyl chloride)(PVC - C), acrylonitrile-butadiene-styrene(ABS) and acrylonitrile-styrene-acrylester (ASA) f
GB/T 4614-1984 Determination of residual styrene monomer in polystyrene by gas chromatography
GB 12671-1990 Polystyrene resin
GB/T 14677-1993 Air quality. Determination of toluene, dimethyl benzene and styrene. Gas chromatography
GB/T 1842-1999 Test method for environmental stress-cracking of polyethylene plastics
GB/T 12672-2009 Acrylonitrile-butadiene-styrene(ABS)resin
GB 12672-1990 Acrylonitrile-butadiene-styrene (ABS) resin
GB/T 9353-1988 Determination of residual styrene monomer in Acrylonitrile-Butadiene-Styrene(ABS) resin by gas chromatography
GB/T 14670-1993 Air quality－Determination of styrene－Gas chromatography
GB/T 3915-2011 Styrene for industrial use
GB/T 1842-2008 Plastics - Test method for environmental stress-cracking of polyethylene
GB/T 8658-1998 Rubber, raw styrene-butadiene, emulsion - Polymerized - Determination of bound styrene content-Refractive index method
GB/T 8655-2006 Styrene - butadiene rubber (SBR) 1500
GB/T 12824-2002 Rubberm,styrene-butadiene (SBR) 1502

Professional Standard - Petrochemical Industry

SH 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH/T 1051-1991 Designation of Styrene-Butadiene Series Impact Polystyrene (SB) Molding and Extrusion Materials
SH 1590-1994 Anti-impact resin of styrene-butadiene series
SH/T 1840-2023 Determination of the content of polycyclic aromatic hydrocarbons in oil-extended styrene-butadiene rubber（SBR）— Gas chromatography-mass spectrum method
SH/T 1590-1994 Styrene-butadiene series impact-resistant polystyrene (SB) resin
SH/T 1502-2014 Determination of bound styrene content in styrene - butadiene rubber latez-Refractive indez method
SH/T 1592-1994 Determination for bound styrene content in tetraphene raw rubber - Nitrofication method
SH/T 1502-1992 Determination for bound styrene content in styrene butadiene latex
SH/T 1593-1994 Determination for bound styrene content in styrene butadiene latex - Nitrofication method
SH/T 1628.7-2023 Vinyl acetate for industrial use – Part 7：Determination of trace benzene series– Gas chromatography–mass spectrometry method
SH/T 1626-2005 Rubber styrene-butadiene(SBR)1712
SH/T 1485.1-1995 Industrial divinylbenzene

工业和信息化部

HG/T 6011-2022 Powered styrene-butadiene rubber
HG/T 4999-2016 Tristyrylphenol ethoxylates
HG/T 5536-2019 Vinyltoluene for industrial use

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 3915-2021 Styrene for industrial use
GB/T 38286-2019 Polyethylene(PE),polypropylene(PP)and polystyrene(PS)resin—Determination of peroxide value
GB/T 8655-2019 Styrene-butadiene rubber(SBR) 1500,1502
GB/T 38271-2019 Plastics—Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I)—Gas chromatography

Professional Standard - Chemical Industry

HG/T 4998~4999-2016 Oleic acid ethoxylates and tristyrylphenol ethoxylates (2016)
HG/T 21561-1994（编制说明） Acrylonitrile Butadiene Styrene (ABS) Pipe and Fittings
HG/T 3943-2007 Poly(vinyl chloride)resin-Determination of toluene content

Military Standard of the People's Republic of China-General Armament Department

GJB/J 5126-2002 Specification for polystyrene particle size reference materials

Professional Standard - Commodity Inspection

SN/T 2889-2011 Food contact materials for export. Polymers. Determination of toluene|| ethylbenzene|| propylbenzene|| isopropylbenzene|| styrene and total volatile substances in polystyrene. Gas chromatography method

国家能源局

SH/T 1813-2017 Low polycyclic aromatic hydrocarbons oil-extended styrene-butadiene rubber(SBR)1723

Taiwan Provincial Standard of the People's Republic of China

CNS 11337-1985 Acrylonitrile-Butadiene-Styrene (ABS) Sheets
CNS 3637-1980 Phenyl Ethylene (Styrene) Monomer
CNS 3894-1975 Method of Test for Styrene Monomer
CNS 11286-1985 Method of Test for Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics
CNS 11285-1985 Rigid Acrylonitrile-Butadiene-Styrene (ABS) Plastics
CNS 13344-1994 Rigid Acrylonitrile - Butadiene - Styrene (ABS) Compounds for Pipes and Fittings

国家质量监督检验检疫总局

SN/T 4156-2015 Determination of divinyl benzene in the imported and exported polystyrene poke-Gas chromatography-mass spectrometry

Professional Standard - Machinery

JB/T 53124-1999 Expandable polystyrene foam molding machine product quality classification

未注明发布机构

DIN EN ISO 19062-2 E:2018-03 Plastics Acrylonitrile Butadiene Styrene (Draft)
DIN EN ISO 19065-2 E:2018-03 Plastics Acrylonitrile Styrene Acrylate (Draft)
DIN EN ISO 19064-2 E:2019-04 Plastic Styrene Acrylonitrile (Draft)
ASTM RR-D20-1200 1998 D1693-Test Method for Environmental Stress-Cracking of Ethylene Plastics
DIN EN ISO 24022-2 E:2019-04 Plastic polystyrene (draft)
DIN EN ISO 19065-1 E:2013-07 Plastics acrylonitrile styrene acrylate, acrylonitrile (ethylene propylene diene) styrene and acrylonitrile (chlorinated polyethylene) styrene molded and extruded materials Part 1: Nomenclature system and basis for specifications (draft)

Professional Standard - Light Industry

QB/T 4216-2011 Allyl phenoxyacetate
QB/T 2894-2007 Acrylonitrile-butadiene-styrene(ABS) color masterbatch
QB/T 2029-1994 ABS/PVC Sheet Material

Professional Standard - Electron

SJ/T 9503.6-1991 Fixed polytene film dielectric metal foil d.c. capacitors--Quality grading standard

Hebei Provincial Standard of the People's Republic of China

DB13/T 2953-2019 Determination of styrene content in styrene-butadiene rubber by infrared spectroscopic external standard method

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1121-2013 SBR Transparent Impact Resin (Butadiene-Styrene Copolymer)

Hunan Provincial Standard of the People's Republic of China

DB43/T 2197-2021 Determination of Methamphetamine and Amphetamine in Water Environment by Liquid Chromatography-Tandem Mass Spectrometry

PL-PKN

PN C89068-1961 Polystyrene. Deferminafion of ?he S?yrene-con?en?s
PN Z04152-05-1993 Air purity protection. Tests for styrene content. Determination of styrene in ambient air (imission) by gas chromatography
PN Z04152-02-1986 Air purity protection Tests for styrene Determination of styrene in work places by gas chromatography with sample enrichment
PN BN 6113-26-1966 Styrene primer
PN BN 6115-35-1966 artificial styrene glaze
PN C89292-1971 Polystytene (homopolymer)
PN BN 6022-01-1966 Organic products. Styrene
PN C89062-1959 Polystyrene. Determination of methanol content of soluble matter
PN C89296-1986 Polystyrene expandable Designation
PN C97858-1988 High-styrene resin Ker 9000

CZ-CSN

CSN 64 3001-1979 Standard polystyrenem Standards oí quality
CSN 64 3002-1979 Impact resistant polystyrenes Standards of quality
CSN 35 8325-1975 Polystyrene film dielectric capaoitors
CSN 64 0766-1979 Plastics testing. Environmental stress cracking of polyethylene plastics
CSN 64 3510 Z1-1995 brick expanded polystyrene
CSN 64 3510-1986 Expanded polystyrene boards
CSN ON 07 7621-1967 filter polystyrene
CSN 64 3008-1985 Expandable polystyrenes Designation
CSN 62 1185-1981 Synthetic rubber latices. Determination of bound styrene content
CSN 62 1128-1981 Determination of content of bound styrene or alphamethylstyrene

Japanese Industrial Standards Committee (JISC)

JIS K 6727-1:2012 Styrene.Part 1: Quality and marking
JIS K 6727:1977 Styrene
JIS K 6876-1:2006 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
JIS K 6872:1995 Polystyrene sheets
JIS K 6876-2:2007 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 2: Preparation of test specimens and determinati
JIS K 6727 AMD 1:2006 Styrene (Amendment 1)
JIS K 6869:2009 Plastics -- Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
JIS K 6873:1975 Acrylonitrile-butadiene-styrene (ABS) sheets
JIS K 6869:1999 Plastics -- Determination of residual styrene monomer in polystyrene by gas chromatography
JIS K 6870:1995 Polystyrene moulding materials
JIS K 6871:1995 Testing methods for polystyrenes

SCC

NS 1641:1969 Fish boxes made of expanded polystyrene - Quality requirements
AS 2508.3.012:1982 Safe storage and handling information card - Styrene (vinyl benzene, styrene monomer)
IEC 60275:1968 Polystyrene film dielectric capacitors
AENOR UNE 171350:2016 Indoor environmental quality. Environmental quality in hospitality.
MIL MIL-S-21923-1959 SYNTHETIC RUBBER COMPOUND, BUTADIENE-STYRENE TYPE, OZONE RESISTANT, FOR LOW TEMPERATURE SERVICE (NO S/S DOCUMENT)
NS-EN ISO 6402-1:2002 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-2 E:2018 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specime...
UNE-EN ISO 6402-1:2003 Plastics. Acrylonitrile-styrene-acrylate-(ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Part 1: Designation system and basis for specification...
AENOR UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-1 E:2013 Draft Document - Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basi...
NS 3062:1974 Pipes and fittings of acrylonitrile-butadiene-styrene for soil and waste water - Dimensions and quality requirements
DANSK DS/EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
NS-EN ISO 19065-1:2014 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
DANSK DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-2:2003 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 2: Preparation of test specimens and determinat...
NS-EN ISO 6402-1:2001 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials — Part 1: Designation system and basis for specificati...
HOLDEN HN 1854-2009 EXPANDED POLYSTYRENE
BS ISO 2561:2006 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
DANSK DS/EN ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
NS-EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
HOLDEN HN 1577-2001 Moulding Compound - Styrene Acrylonitrile (SAN)
DANSK DS/ISO 19065-2:2019 Plastics – Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials – Part 2: Preparation of test specimens and determinat...
AENOR UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) molding and extrusion materials - Part 2: Preparation of test specimens and determinat...
AS 1366.3:1982 Rigid cellular plastics sheets for thermal insulation - Rigid cellular polystyrene
CAN3-A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives
CAN3 A451.1-M86-1986(R2001) Polystyrene Insulation Adhesives
HOLDEN HN 2198-2014 FOAM - POLYSTYRENE - PPO
DANSK DS/EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
NS-EN 15549:2008 Air quality — Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
HOLDEN HN 1459-2001 Polystyrene Moulding Compounds
10/30211408 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
HOLDEN HN 1259-2007 ACRYLONITRILE BUTADIENE STYRENE (ABS) COMPOUNDS
HOLDEN HN 1011-2001 Adhesive Polystyrene Foam
AS A133:1964 Specification for polystyrene wall tiles
DANSK DS/EN 17844:2023 Construction products: Assessment of release of dangerous substances – Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX) – Gas chromatographic method with mass spectrometric ...
BS 1673-5/5.1:1963 Methods of testing raw rubber and unvulcanized compounded rubber. Analysis of styrene butadiene copolymers (SBR)-Bound styrene content
HOLDEN HN 1259-2012 Acrylonitrile Butadiene Styrene ABS Compounds

International Organization for Standardization (ISO)

ISO/PRF 3136 Rubber latex — Styrene-butadiene — Determination of bound styrene content
ISO 2453:1975 Styrene-butadiene copolymers — Determination of bound styrene content
ISO 3136:2023 Rubber latex — Styrene-butadiene — Determination of bound styrene content
ISO 19065-2:2019 Plastics — Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials —
ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
ISO/DIS 2561:1975 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO/FDIS 2561:2023 Plastics — Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2058:1973 Determination of volatile substances in raw styrene-butadiene rubber (SBR)
ISO 6402-1:2001 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
ISO 5478:2006 Rubber - Determination of styrene content - Nitration method
ISO 5478:1990 Rubber; determination of styrene content; nitration method
ISO 2561:2012 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 2561:2006 Plastics - Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
ISO 5478:1980 Rubber — Determination of styrene content — Nitration method
ISO 7781:1986 Rubber, raw styrene-butadiene; Soap and organic acid content; Determination
ISO 3136:1983 Rubber latex; Styrene-butadiene; Determination of bound styrene content
ISO 3136:1975 Title missing - Legacy paper document
ISO 4655:1977 Rubber — Reinforced styrene-butadiene latex — Determination of total bound styrene content
ISO 2561:1974 Plastics; Determination of residual styrene monomer in polystyrene by gas chromatography

RO-ASRO

STAS 7459/1-1982 STYRENE-BUTADIENE COPOLY- MERS Delerinination of bound styrene conlvnt
STAS 7459/2-1974 Rubbcrs RAW BUTADIENE-STYRENE RUBBER Detcrmination of bound a-methyl styrene monomer content
STAS SR ISO 3136:1994 Rubber Latex - Styrene-Butadiene Determination of bound styrene content
STAS 9067-1979 POLYSTYRENE FILM DIELECTRIC CAPACITORS (STIROGEN) General technical requirements for quality
STAS 7862-1980 POLYSTYRENE
STAS 12207-1984 TECHNICAL STYRENE
STAS 8365/2-1990 Rubber. Test recipe for butadiene-styrene and butadiene-alphamethyil styrene rubbers testing
STAS 9410-1980 SHOCK-RESISTANT POLYSTYRENE PLATES
STAS 7861-1980 IMPACT RESISTANT POLYSTYRENE
STAS 10024-1975 ACRYLONITRILE- BUTADIENE - STYRENE COPOLYMER
STAS 7458-1985 BUTADIENE-STYPRENIC TYPE SYNTHETIC RUBBER Stabilizer content determination
STAS 10937-1983 TECHNICAL ALPHA DIETHYL STYRENE

US-CFR-file

CFR 40-721.10724-2014 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10724:Oxirane,[[2-(2-ethenyloxy)ethoxy]methyl]-.
CFR 40-721.9492-2014 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.9492:Polymers of styrene,cyclohexyl methacrylate and substituted methacrylate.
CFR 40-721.10280-2013 Protection of Environment. Part721:Significant new uses of chemical substances. Section721.10280:Benzene ethenyl-, polymer with 1,3-butadiene, brominated.

IN-BIS

IS 4105-1988 Styrene (vinylbenzene) specifications
IS 3928-1986 Specification for styryl acetate
IS 3463-1966 Specification for polystyrene wall tiles

NO-SN

NS 1641-1969 Fish boxes made of expanded polystyrene - Quality requirements

TR-TSE

TS 2610-1977 STYRENE - BUTEDIEN COPOLYMERS - DETERMINATION OF BOUND STYRENE CONTENT
TS 3486-1980 ?RAW STYRENE — BUTADIENE RUBBER (SBR) — DETERMINATION OF SOAP CONTENT-
TS 3247-1978 Sanayide Kullan?lan Stiren
TS 3485-1980 RAW STYKENE — BUTADIENE RUBBER — DETE MINATION OF ORGANIC ACID CONTENT.
TS 340-1966 PLASTICS DETERMINATION OF THE PERCENTAGE OF STYRENE ?N POLYSTYRENE WITH WIJS SOLUTION
TS 2489-1977 POLYSTYRENE MOULDING MATERIAL

Korean Agency for Technology and Standards (KATS)

KS M ISO 3136-2019 Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M ISO 3136:2009 Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M 3349-1981 Styrene
KS M 3349-2021 Styrene
KS M 3349-2011 Styrene
KS M 3349-2016 Styrene
KS M ISO 4655:2009 Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
KS M ISO 2453-2019 Rubber, raw styrene-butadiene, emulsion-polymerized — Determination of bound styrene content — Refractive index method
KS M 3203-1976 POLYSTYRENE SHEETS
KS M 3203-2003 POLYSTYRENE SHEETS
KS M 3203-1997 POLYSTYRENE SHEETS
KS M ISO 3136-2009(2019) Rubber latex－Styrene-butadiene－Determination of bound styrene content
KS M 3203-2004 POLYSTYRENE SHEETS
KS M ISO 2561-2023 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS F 2234-2004(2014) Measuring method for the mass per unit volume(density) and the mass per unit of surface area of polystyrene composite wood wool cement boards
KS M ISO 5478:2010 Rubber－Determination of styrene content－Nitration method
KS M ISO 5478-2021 Rubber－Determination of styrene content－Nitration method
KS M 3347-1986 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3347-2011 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1979(1997) ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2022 Acrylonitrile-butadiene-styrene(ABS) sheets
KS M 3351-1982 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3351-2002 ACRYLONITRILE-BUTADIENE-STYRENE(ABS) RESIN
KS M 3347-2016(2021) Acrylonitrile-butadiene-styrene(ABS) sheets
KS M ISO 2561-2013(2018) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M 3347-2016 Acrylonitrile-butadiene-styrene(ABS) sheets
KS F 4734-2012(2017) Expanded polystyrene lightweight concrete panel for wall
KS M ISO 4655-2020 Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
KS M ISO 4655-2009(2014) Rubber－Reinforced styrene-butadiene latex－Determination of total bound styrene content
KS M ISO 2561:2013 Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography
KS M ISO 2561:2003 Plastics-Determination of residual styrene monomer in polystyrene(PS) and inpact-resistant polystyrene(PS-I) by gas chromatography
KS M 3158-1997 polystyrene molding material
KS M ISO 5478-2010(2015) Rubber－Determination of styrene content－Nitration method

GSO

GSO ISO 3136:2015 Rubber latex -- Styrene-butadiene -- Determination of bound styrene content
GSO ISO 6235:2015 Rubber, raw -- Determination of block polystyrene content -- Ozonolysis method
GSO ISO 2453:2015 Rubber, raw styrene-butadiene, emulsion-polymerized -- Determination of bound styrene content -- Refractive index method
GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
OS GSO ISO 19065-1:2017 Plastics -- Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials -- Part 1: Designation system and basis for specificatio
GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BH GSO ISO 2561:2016 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
OS GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
OS GSO ISO 2561:2015 Plastics -- Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BH GSO ISO 6402-2:2016 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
GSO ISO 6402-2:2013 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

ES-UNE

UNE 53975:2023 Plastics. Polyethylene (PE), Polypropylene (PP) and Poly(ethylene terephthalate) (PET) containers. Environmental stress-crack resistance in active environment.
UNE-EN ISO 19065-2:2020 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...

AR-IRAM

IRAM 13 310-1962 Determination of soluble styrene content in polystyrene
IRAM 1049-N.I.O.-1949 Styrene resin

FI-SFS

SFS 4388-1979 plastic. Polystyrene. Determination of styrene content depicted by vaporized chromium
SFS-ISO 2897/2 E:1986 Plastics. Impact-resistant polystyrenes. Part 2: Determination of properties

RU-GOST R

GOST R 54551-2011 Rubber styrene-butadiene. Determination of bound styrene content. Refractive index method
GOST 22019-1985 Synthetic rubbers. Method for determination of free styrene and alpha-methyl styrene
GOST 10003-1990 Styrene. Specifications
GOST 23492-1983 Synthetic rubbers, butadiene-styrene SKS-30ARKPN and butadiene-methylstyrene SKMS-30ARKPN. Specifications
GOST 15820-1982 Polystyrole and copolymers of styrole. Gas chromatographic method for determination of resictual monomers and non-polymerizing impurities
GOST 24654-1981 Synthetic rubbers. Method for determination of bound styrene content and alpha-methylstyrene
GOST 12998-1985 Polystyrene film. Specifications
GOST 12851-1987 Polystyrene filaments. Specifications
GOST 15627-1979 Synthetic rubbers butadiene-methylstyrene CKMC-30 APK and butadiene-styrene CKC-30 APK. Specifications

United States Navy

NAVY MIL-S-14195 A REINST NOTICE 2-1990 STYRENE MONOMER
NAVY MIL-S-14195 A-1970 STYRENE MONOMER
NAVY MIL-S-14195 A NOTICE 4-2003 STYRENE MONOMER
NAVY MIL-P-19644 C-1970 PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD)
NAVY MIL-P-19644 C INT AMD 1-1991 PLASTIC MOLDING MATERIAL (POLYSTYRENE FOAM, EXPANDED BEAD)

American National Standards Institute （ANSI)

BS ISO 3136:2023 Rubber latex. Styrene-butadiene. Determination of bound styrene content (British Standard)
ANSI/ASTM D4225:1997 Specification for Styrene-Butadiene Sheeting (08.03)
ANSI/ASTM D5676:1999 Specification for Recycled Polystyrene Molding and Extrusion Materials (08.03)

British Standards Institution (BSI)

22/30446382 DC BS ISO 3136. Rubber latex. Styrene-butadiene. Determination of bound styrene content
BS ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
BS EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Preparation of test specimens and determination of prop
BS EN ISO 19065-1:2014 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Designation system and basis for specifications
18/30358631 DC BS ISO 2453. Rubber, raw styrene-butadiene, emulsion-polymerized. Determination of bound styrene content. Refractive index method
BS ISO 2561:2023 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS EN 17844:2023 Construction products: Assessment of release of dangerous substances. Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX). Gas chromatographic method with mass…
BS ISO 2561:2012 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PSI) by gas chromatography
BS EN ISO 19065-2:2019 Plastics. Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials. Preparation of test specimens and det...
23/30428206 DC BS ISO 2561. Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
BS ISO 21561-2:2016 Styrene-butadiene rubber (SBR). Determination of the microstructure of solution-polymerized SBR. FTIR with ATR method

SE-SIS

SIS 16 66 02-1966 Polystyrene. Determination of the percentage of styrene with Wijs solution
SIS 16 66 60-1966 Styrene moulding and extrusion compounds. General information
SIS 16 66 53-1966 Acrylonilrile-butadiene-slyrene (ABS) moulding and extrusion compounds

CEN - European Committee for Standardization

EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA)@ acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
EN ISO 6402-1:2001 Plastics - Acrylonitrile-Styrene-Acrylate (ASA)@ Acrylonitrile-(Ethylene-Propylene-Diene)-Styrene (AEPDS) and Acrylonitrile-(Chlorinated Polyethylene)-Styrene (ACS) Moulding and Extrusion Materials - Part 1: Designation Systems and Basis for Specification

US-VA

VA 07 52 16.13-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, COLD-APPLIED

US-FCR

FCR VA 07 52 16-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, HOT-APPLIED
FCR VA 07 52 16.13-2010 STYRENE-BUTADIENE-STYRENE MODIFIED BITUMINOUS MEMBRANE ROOFING, COLD-APPLIED
FCR FED PS31-70-1971 POLYSTYRENE PLASTIC SHEET

Association Francaise de Normalisation

NF T46-071*NF ISO 2453:2020 Rubber, raw styrene-butadiene, emulsion-polymerized - Determination of bound styrene content - Refractive index method
NF EN ISO 19065-2:2019 Plastiques - Matériaux à base d'acrylonitrile-styrène-acrylate (ASA), d'acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et d'acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 2 : préparation d...
NF T53-037-1:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF T53-039-1*NF EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1 : designation system and basis for specification
NF EN ISO 19065-1:2015 Plastiques - Matériaux plastique acrylonitrile-styrène-acrylate (ASA), plastique acrylonitrile-(éthylène-propylène-diène)-styrène (AEPDS) et plastique acrylonitrile-(polyéthylène chloré)-styrène (ACS) pour moulage et extrusion - Partie 1 : s...
NF T53-037-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2 : preparation of test specimens and determinatio
NF EN 15549:2008 Air quality - Standard method for measuring the concentration of benzo[a]pyrene in ambient air
NF T54-420*NF EN ISO 15015:2011 Plastics - Extruded sheets of impact-modified acrylonitrile-styrene copolymers (ABS, AEPDS and ASA) - Requirements and test methods.
NF X43-560*NF EN 15549:2008 Air quality - Standard method for the measurement of the concentration of Benzo[a]pyrene in ambient air
NF T45-172:1994 Raw materials for the rubber industry. Carbon black. Evaluation of the quality of the carbon black in a styrene-butadiene based mixture.

IL-SII

S.I.533-1967 POLYSTYRENE SHEETS

American Society for Testing and Materials (ASTM)

ASTM D2121-00 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
ASTM D2121-07 Standard Test Methods for Polymer Content of Styrene Monomer and AMS (alpha-Methylstyrene)
ASTM D4225-97 Standard Specification for Styrene-Butadiene Sheeting
ASTM UOP913-92 Impurities in Styrene by Gas Chromatography
ASTM D3314-02(2021) Standard Test Method for Rubber—Chemical Analysis for Polystyrene Blocks In SBR (Styrene-Butadiene Rubber) and Styrene-Reinforced Latices
ASTM D4026-06(2017) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM C578-12b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM D2119-96 Standard Test Method for Aldehydes in Styrene Monomer
ASTM D4590-18 Standard Test Method for Colorimetric Determination of p-tert -Butylcatechol In Styrene Monomer or AMS (α–Methylstyrene) by Spectrophotometry
ASTM D4026-87(2002)e1 Standard Test Method for Rubber Latex-Styrene-Butadiene Copolymer-Determination of Residual Styrene
ASTM C578-05 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-22 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM D4026-06(2021) Standard Test Method for Rubber Latex—Styrene-Butadiene Copolymer—Determination of Residual Styrene
ASTM C578-04a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-05a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-15a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM D3160-20 Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
ASTM D3160-20a Standard Test Method for Phenol Content of Cumene (Isopropylbenzene) or AMS (α–Methylstyrene)
ASTM C578-08 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-00 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-11a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-92 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM D4026-06 Standard Test Method for Rubber Latex8212;Styrene-Butadiene Copolymer8212;Determination of Residual Styrene
ASTM D6817-13 Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D6817/D6817M-13a Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM C578-10a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-10 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-12 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-14 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-07 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-95 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-15 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-17a Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-13 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM D6817/D6817M-17(2021) Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM D6817/D6817M-17 Standard Specification for Rigid Cellular Polystyrene Geofoam
ASTM C578-09 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-08b Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-01 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-19 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM C578-16 Standard Specification for Rigid, Cellular Polystyrene Thermal Insulation
ASTM D4026-06(2012) Standard Test Method for Rubber Latexmdash;Styrene-Butadiene Copolymermdash;Determination of Residual Styrene

GB-REG

REG 14 CFR PART 1216-2012 ENVIRONMENTAL QUALITY
REG 36 CFR PART 907-2011 ENVIRONMENTAL QUALITY
REG 36 CFR PART 1010-2011 ENVIRONMENTAL QUALITY

GM Europe

GME QK 000753-1998 Modified thermoplastic elastomer materials based on styrene-ethylene/butylene-styrene. English/German
GME QK 000222-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 002400-2006 ABS-, ASA- resp. SAN-Blends (English/German)
GME QK 000225-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000223-1996 Styrol-Acrylnitril-Copolymerisat Styrene-Acrylonitrile-Copolymer English Translation Available
GME QK 000224-1996 Styrol-Acrylnitril-Copolymerisat mit Glasfasern Styrene-Acrylonitrile-Copolymer with Glass Fibres English Translation Available
GME QK 000403-2003 Rigid PVC+ABS-Blend with Mineral Fillers (English/German)

KR-KS

KS F 4734-2022 Expanded polystyrene lightweight concrete panel for wall
KS M ISO 2561-2013(2023) Plastics — Determination of residual styrene monomer in polystyrene(PS) and impact-resistant polystyrene(PS-I) by gas chromatography

Lithuanian Standards Office

LST EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
LST EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
LST EN 15549-2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air

Danish Standards Foundation

DS/EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
DS/EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DS/EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air

German Institute for Standardization

DIN EN ISO 19065-2:2019 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 6402-1:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specification
DIN EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
DIN EN ISO 19065-2:2019-06 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat...
DIN EN 15549:2008-06 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
DIN EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air; German version EN 15549:2008
DIN EN ISO 19065-1:2015-03 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificati...
DIN EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications

AENOR

UNE-EN ISO 6402-2:2004 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determination
UNE-EN ISO 19065-1:2015 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
UNE-ISO 2561:2014 Plastics. Determination of residual styrene monomer in polystyrene (PS) and impact-resistant polystyrene (PS-I) by gas chromatography
UNE-EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
UNE 53975:2007 Plastics. Polyethylene (PE) containers. Environmental stress-crack resistance.

US-AAMA

AAMA 304-2007 Voluntary Specification for Acrylonitrile-Butadiene-Styrene(ABS) Exterior Profiles Capped with ASA or ASA/PVC Blends

European Committee for Standardization (CEN)

EN ISO 19065-1:2014 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-(ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-(chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specifications
EN ISO 6402-1:2002 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile- (ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile- (chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 1: Designation system and basis for specificatio
EN ISO 6402-1:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA,AES,ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 1: Designation System and Basis for Specifications ISO 6402-1:1997
EN ISO 6402-2:1999 Plastics - Impact-Resistant Acrylonitrile/Styrene (ASA, AES, ACS) Moulding and Extrusion Materials, Excluding Butadiene-Modified Materials - Part 2: Preparation of Test Specimens and Determination of Properties ISO 6420-2:1994
EN ISO 6402-2:2003 Plastics - Acrylonitrile-styrene-acrylate (ASA), acrylonitrile-( ethylene-propylene-diene)-styrene (AEPDS) and acrylonitrile-( chlorinated polyethylene)-styrene (ACS) moulding and extrusion materials - Part 2: Preparation of test specimens and determinat
CEN EN 15549-2008 Air quality — Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air
EN 15549:2008 Air quality - Standard method for the measurement of the concentration of benzo[a]pyrene in ambient air

GOSTR

GOST 23492-2019 Butadiene-methylstyrene SKMS-30ARKPN and butadiene-styrene SKS-30ARKPN rubbers. Specifications
GOST 15627-2019 Butadiene-methylstyrene SKMS-30ARK and butadiene-styrene SKS-30ARK synthetic rubbers. Specifications
GOST 11138-2019 Butadiene-methylstyrene SKMS-30ARKM-15 and butadiene-styrene SKS-30ARKM-15 synthetic rubbers. Specifications

GM North America

GM 9985206-1980 Adhesive - Styrene
GM GMP.PS.004-1993 PS - Expandable Polystyrene
GM GM9312P-1988 Total Moisture Content of Polystyrene Beads and Pellets

TH-TISI

TIS 655.3-2011 Plastic utensils for food.part 3: acrylonitrile-butadiene-styrene and styrene.acrylonitrile
TIS 2438-2009 Polystyrene foam mattresses
TIS 655.1-2010 Plastic utensils for food.part 1: polyethylene, polpropylene, polystyrene, poly(ethylene terephthalate), poly (vinyl alcohol) and poly(methyl pentene)
TIS 836-1988 Standard for polystyrene resin
TIS 2357-2007 Acrylonitrile.butadiene.styrene (abs) pressure pipe

Standard Association of Australia （SAA）

AS/NZS 4585.1:1999 Low styrene emission resins - Determination of styrene evaporation from unsaturated polyester and vinyl ester resins

GM Daewoo

GMKOREA EDS-M-4626-2014 Polypropylene and Styrene Butadiene Styrene Copolymer Blend (Version 10; English/Korean)
GMKOREA EDS-M-4624-2014 Polypropylene and styrene, ethylene, butadiene, styrene copolymer blend Shore A 70 (Version 2; English/Korean)
GMKOREA EDS-M-4308-2012 Acrylonitrile-styrene-acrylate copolymer

U.S. Military Regulations and Norms

ARMY L-P-527 B NOTICE 2-2013 PLASTIC SHEET, STYRENE-BUTADIENE

Indonesia Standards

SNI 06-0176-2000 High impact polystyrene
SNI 06-0175-2002 General purpose polystyrene

Natural Gas Processor's Association (NGPA)

GPA RR-82-1984 Vapor-Liquid Equilibria Measurements on the Systems Ethane-Toluene, Ethane-N-Propylbenzene, Ethane-Metaxylene, Ethane-Mesitylene, Ethane-Methylcyclohexane

HU-MSZT

MSZ 7554-1961 Impression molding method. Quality requirements and testing of polystyrene molded by extrusion molding
MSZ 7556-1961 Impression molding method. Quality requirements and testing of polystyrene molded by extrusion molding

(U.S.) Ford Automotive Standards

FORD ESA-M4D396-A-1979 ACRYLIC, STYRENE MODIFIED

DIN

DIN EN 17844:2024 Construction products: Assessment of release of dangerous substances - Determination of the content of polycyclic aromatic hydrocarbons (PAH) and of benzene, toluene, ethylbenzene and xylenes (BTEX) - Gas chromatographic method with mass spectrometric ...

GM Holden Ltd

HOLDEN HN 2198-2000 Foam - Polystyrene - PPO

Others: Environmental Quality,Environmental Quality Assessment,Styrene,Environmental quality of livestock and poultry farms,Environmental quality inspection,polystyrene styrene,as styrene,Soil environmental quality,Land Environmental Quality,"Soil Environmental Quality,water environment quality,Environmental Quality Monitoring,Soil environmental quality,Soil Environmental Quality,Soil construction environment quality,Acoustic environment quality,"Environmental Quality