The XRD standards used are

The XRD standards used are, Total:500 items.

The international standard classification for "The XRD standards used are" includes: Standardization. General rules , Chemical reagents , Water quality , Iron ores , Thermoplastic materials , Testing of metals in general .

The Chinese standard classification for "The XRD standards used are" includes: Standardization and Quality Management , Environmental sanitation , Iron ore , Basic standards and general methods for synthetic resin and plastic , Fragrances and flavors , Basic standards and general methods .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 6730.85-2023 Iron ores―Preparation and certification of certified reference materials for use in chemical analysis
GB/T 15000.7-2012 Directives for the work of reference materials (7)—General requirements for the competence of reference material producers
GB/T 15000.8-2003 Directives for the work of reference materials(8) - Uses of certified reference materials
GB/T 15000.9-2004 Directives for the work of reference materials（9）—Calibration in analytical chemistry and use of certified reference materials
GB/T 16307-1996 Sequential sampling plans for inspection by variables for percent nonconforming (known standard deviation)
GB/T 5750.2-2006 Standard Examination Methods for Drinking Water - Collection and Preservation of Water Samples
GB/T 15000.7-2001 Directives for the work of reference materials(7) - General requirements for the competence of reference material producers (ISO Guide 34: 2000,IDT)

Professional Standard - Agriculture

GB/T 15000.8-2023 Directives for the work of reference materials—Part 8： Good practice in using reference materials
第1．1．1章OIE陆生动物诊断试验和疫苗手册-第七版 General standard - Introduction - Collection and transport of samples for diagnostic purposes

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 17037.5-2020 Plastics—Injection moulding of test specimens of thermoplastic materials—Part 5: Preparation of standard specimens for investigating anisotropy
GB/T 15000.7-2021 Directives for the work of reference materials—Part 7:General requirements for the competence of reference material producers

Professional Standard - Tobacco

YC/T 145.7-1998 Tobacco flavor - Identification and storage of standard sample

Professional Standard - Ferrous Metallurgy

YB/T 4143-2006 Development of standard samples of materials used for inspection of uniformity of

American Society for Testing and Materials (ASTM)

ASTM E3277-21 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM E3277-22 Standard Test Method for Determining Whether a Material is a Liquid or a Solid by Rheometry
ASTM F3419-22 Standard Test Method for Mineral Characterization of Equine Surface Materials by X-Ray Diffraction (XRD) Techniques
ASTM E2458-17 Standard Practices for Bulk Sample Collection and Swab Sample Collection of Visible Powders Suspected of Being Biological Agents and Toxins from Nonporous Surfaces
ASTM D5451-93(2004) Standard Practice for Sampling Using a Trier Sampler
ASTM D3244-21a Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ASTM F1358-00 Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
ASTM F1358-00(2005) Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
ASTM F1358-08 Standard Test Method for Effects of Flame Impingement on Materials Used in Protective Clothing Not Designated Primarily for Flame Resistance
ASTM D5451-93 Standard Practice for Sampling Using a Trier Sampler
ASTM D5358-93(1998) Standard Practice for Sampling with a Dipper or Pond Sampler
ASTM D6538-00(2005)e1 Standard Guide for Sampling Wastewater With Automatic Samplers
ASTM D5451-93(2008) Standard Practice for Sampling Using a Trier Sampler
ASTM D5633-04 Standard Practice for Sampling with a Scoop
ASTM D5633-94(2001) Standard Practice for Sampling with a Scoop
ASTM D5633-94 Standard Practice for Sampling with a Scoop
ASTM D5633-21 Standard Practice for Sampling with a Scoop
ASTM D5633-04(2016) Standard Practice for Sampling with a Scoop
ASTM D5358-93(2009) Standard Practice for Sampling with a Dipper or Pond Sampler
ASTM D5358-93(2014) Standard Practice for Sampling with a Dipper or Pond Sampler
ASTM D5451-21 Standard Practice for Sampling Using a Trier Sampler
ASTM D5451-93(2001) Standard Practice for Sampling Using a Trier Sampler
ASTM D5451-93(2012) Standard Practice for Sampling Using a Trier Sampler
ASTM D5451-93(2016) Standard Practice for Sampling Using a Trier Sampler
ASTM E1806-96(2001) Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM D5358-93(2019) Standard Practice for Sampling With a Dipper or Pond Sampler
ASTM E29-22 Standard Practice for Using Significant Digits in Test Data to Determine Conformance with Specifications
ASTM D2013-72 Standard Method Of Preparing Coal Samples For Analysis
ASTM D5633-04(2008) Standard Practice for Sampling with a Scoop
ASTM D6353-98 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
ASTM D6353-06 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
ASTM D6353-06(2011) Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
ASTM D6353-06(2017)e1 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
ASTM D6354-12(2017) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ASTM D6353-23 Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
ASTM D2013-04 Standard Practice of Preparing Coal Samples for Analysis
ASTM D5495-94 Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
ASTM D5495-94(2001) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
ASTM D5139-90(1996) Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D5139-19 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D5495-21 Standard Practice for Sampling with a Composite Liquid Waste Sampler (COLIWASA)
ASTM D5495-03(2016) Standard Practice for Sampling With a Composite Liquid Waste Sampler (COLIWASA)
ASTM D6759-02 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D6759-07 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D6759-09 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D6759-16 Standard Practice for Sampling Liquids Using Grab and Discrete Depth Samplers
ASTM D6354-98 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ASTM D6354-98(2003) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ASTM D6354-98(2008) Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ASTM D6956-17 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM D4131-84(1999)e1 Standard Practice for Sampling Fish with Rotenone
ASTM D4131-84(2005) Standard Practice for Sampling Fish with Rotenone
ASTM D2013/D2013M-09 Standard Practice for Preparing Coal Samples for Analysis
ASTM D5633-04(2012) Standard Practice for Sampling with a Scoop
ASTM D6353-98(2003) Standard Guide for Sampling Plan and Core Sampling for Prebaked Anodes Used in Aluminum Production
ASTM E634-96(2001) Standard Practice for Sampling of Zinc and Zinc Alloys for Optical Emission Spectrometric Analysis
ASTM D6354-12 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ASTM D8417-21 Standard Guide for Sampling of Hempseed Intended for Human Consumption
ASTM D6169-98 Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM D6169-98(2005) Standard Guide for Selection of Soil and Rock Sampling Devices Used With Drill Rigs for Environmental Investigations
ASTM D6519-02 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D6519-00 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D6354-23 Standard Guide for Sampling Plan and Core Sampling of Carbon Cathode Blocks Used in Aluminum Production
ASTM D2234/D2234M-10 Standard Practice for Collection of a Gross Sample of Coal
ASTM D6699-01(2010) Standard Practice for Sampling Liquids Using Bailers
ASTM D6699-01 Standard Practice for Sampling Liquids Using Bailers
ASTM D2258-99(2012) Standard Practice for Sampling Yarn for Testing
ASTM D2258/D2258M-16(2022) Standard Practice for Sampling Yarn for Testing
ASTM D6699-16 Standard Practice for Sampling Liquids Using Bailers
ASTM D2258/D2258M-16 Standard Practice for Sampling Yarn for Testing
ASTM D7365-07 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
ASTM D7365-09 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
ASTM E1728-10 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM D7365-09a(2022) Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
ASTM D1045-95 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM D1045-95(2001) Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM E2346/E2346M-15 Standard Guide for Sensory Evaluation of Household Hard Surface-Cleaning Products with Emphasis on Spray Triggers
ASTM E947-83(2002) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM E947-83(2015) Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis
ASTM D6966-18 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D6519-05 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D6519-08 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D6519-15 Standard Practice for Sampling of Soil Using the Hydraulically Operated Stationary Piston Sampler
ASTM D2013-03 Standard Practice of Preparing Coal Samples for Analysis
ASTM E1253-07 Standard Guide for Reconstitution of Irradiated Charpy-Sized Specimens
ASTM D2013-01 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-00ae1 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-00 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-00a Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013-07 Standard Practice for Preparing Coal Samples for Analysis
ASTM D1441-00 Standard Practice for Sampling Cotton Fibers for Testing
ASTM D1441-06 Standard Practice for Sampling Cotton Fibers for Testing
ASTM D2013-86(1994) Standard Method of Preparing Coal Samples for Analysis
ASTM D5337-04 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
ASTM D2013/D2013M-11 Standard Practice for Preparing Coal Samples for Analysis
ASTM D2013/D2013M-12 Standard Practice for Preparing Coal Samples for Analysis
ASTM D1441-12 Standard Practice for Sampling Cotton Fibers for Testing
ASTM D2013/D2013M-20 Standard Practice of Preparing Coal Samples for Analysis
ASTM D2013/D2013M-21 Standard Practice for Preparing Coal Samples for Analysis
ASTM B215-15 Standard Practices for Sampling Metal Powders
ASTM D4131-84(2014) Standard Practice for Sampling Fish with Rotenone
ASTM D3964-04 Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D4136-82(1998) Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles
ASTM D4136-82(2012) Standard Practice for Sampling Phytoplankton with Water-Sampling Bottles
ASTM D7365-09a(2015) Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
ASTM E1728-16 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM D6966-03 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D6966-08 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM E1728-03 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1198-87(1998) Standard Practice for Sampling Zooplankton with Pumps
ASTM D6988-07 Standard Guide for Determination of Thickness of Plastic Film Test Specimens
ASTM E1198-87(2004) Standard Practice for Sampling Zooplankton with Pumps
ASTM D3665-07 Standard Practice for Random Sampling of Construction Materials
ASTM D4132-82(1998) Standard Practice for Sampling Phytoplankton with Conical Tow Nets
ASTM E1198-19 Standard Practice for Sampling Zooplankton with Pumps
ASTM D6969-17 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM C42/C42M-99 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C42/C42M-03 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C42/C42M-04 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM C42/C42M-16 Standard Test Method for Obtaining and Testing Drilled Cores and Sawed Beams of Concrete
ASTM D3964-80(1998) Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D7718-11 Standard Practice for Obtaining In-Service Samples of Lubricating Grease
ASTM D3370-10 Standard Practices for Sampling Water from Closed Conduits
ASTM D6970-03 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
ASTM D6970-03(2019) Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
ASTM D3964-10(2020) Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM E1289-08(2016) Standard Specification for Reference Specimen for Sound Transmission Loss
ASTM D7308-07 Standard Practice for Sample Preparation of Thermoplastic Traffic Marking Materials
ASTM B982-20 Standard Specification for Sampling and Sample Preparation of Lead and Lead Alloys for Optical Emission Spectrometric or ICP Analysis
ASTM R0007 General Description of Production, Properties, and Uses of Sintered Metal Powder Bearings and Structural Parts (This is not an ASTM Standard; available as PDF, only)
ASTM E1644-17 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM C999-90(2000) Standard Practice for Soil Sample Preparation for the Determination of Radionuclides
ASTM C998-90(2000) Standard Practice for Sampling Surface Soil for Radionuclides
ASTM D5337-97 Standard Practice for Flow Rate for Calibration of Personal Sampling Pumps
ASTM D4427-07 Standard Classification of Peat Samples by Laboratory Testing
ASTM D3326-07 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM C1019-19 Standard Test Method for Sampling and Testing Grout for Masonry
ASTM C1019-08 Standard Test Method for Sampling and Testing Grout
ASTM C1019-08a Standard Test Method for Sampling and Testing Grout
ASTM C99-87(2000) Standard Test Method for Modulus of Rupture of Dimension Stone
ASTM C99-08 Standard Test Method for Modulus of Rupture of Dimension Stone
ASTM D6699-01(2006) Standard Practice for Sampling Liquids Using Bailers
ASTM D6926-04 Standard Practice for Preparation of Bituminous Specimens Using Marshall Apparatus
ASTM D6969-03 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM C1385/C1385M-10 Standard Practice for Sampling Materials for Shotcrete
ASTM C1019-20 Standard Test Method for Sampling and Testing Grout for Masonry
ASTM D3326-07(2011) Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM C1075-17 Standard Practices for Sampling Uranium-Ore Concentrate
ASTM C1385/C1385M-10(2017) Standard Practice for Sampling Materials for Shotcrete
ASTM E1078-14 Standard Guide for Specimen Preparation and Mounting in Surface Analysis
ASTM D5337-11(2016) Standard Practice for Flow Rate Adjustment of Personal Sampling Pumps
ASTM D5842-04 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
ASTM D4638-11 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM E1994-09(2018) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
ASTM D5139-90(2001) Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM D4638-16 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D4135-82(1998) Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
ASTM D4135-82(2012) Standard Practice for Sampling Phytoplankton With Depth-Integrating Samplers
ASTM E877-08 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition
ASTM G121-98 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G121-98(2004) Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM G121-98(2010)e1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM F3634-23 Standard Guide for Preparing Weathered Samples of Oil Using a Rotary Evaporator
ASTM D1045-19 Standard Test Methods for Sampling and Testing Plasticizers Used in Plastics
ASTM C183/C183M-15 Standard Practice for Sampling and the Amount of Testing of Hydraulic Cement
ASTM D2813-97 Standard Practice for Sampling Leather for Physical and Chemical Tests
ASTM D5611-94(2002) Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
ASTM D4638-03(2007) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM F307-02(2007) Standard Practice for Sampling Pressurized Gas for Gas Analysis
ASTM D5702-02 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
ASTM D5702-95 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
ASTM D3976-92(2005) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D3976-92(2001) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D3976-92(1996) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM E1675-95a Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM D2813-03(2021) Standard Practice for Sampling Leather for Physical and Chemical Tests
ASTM D4638-95a(1999) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D3964-10 Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D3700-94 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D3700-01 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM F307-02 Standard Practice for Sampling Pressurized Gas for Gas Analysis
ASTM D5611-94(2008) Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
ASTM D3976-92(2010) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D6001-05(2012) Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
ASTM E2548-11 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
ASTM D3326-90(1996)e1 Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D3326-90(2002) Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM E1675-04(2012) Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM F307-13(2020) Standard Practice for Sampling Pressurized Gas for Gas Analysis
ASTM C1703-18(2023) Standard Practice for Sampling of Gaseous Uranium Hexafluoride for Enrichment
ASTM D4638-16(2021)e1 Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM D3326-07(2017) Standard Practice for Preparation of Samples for Identification of Waterborne Oils
ASTM D4638-16(2023) Standard Guide for Preparation of Biological Samples for Inorganic Chemical Analysis
ASTM F307-13 Standard Practice for Sampling Pressurized Gas for Gas Analysis
ASTM D2944-22 Standard Practice of Sampling Processed Peat Materials for Horticultural Purposes
ASTM C998-17 Standard Practice for Sampling Surface Soil for Radionuclides
ASTM D3976-92(2015) Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D3964-10(2015) Standard Practice for Selection of Coating Specimens for Appearance Measurements
ASTM D4427-13 Standard Classification of Peat Samples by Laboratory Testing
ASTM D3700-16 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM C1758/C1758M-23 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
ASTM D6956-11 Standard Guide for Demonstrating and Assessing Whether a Chemical Analytical Measurement System Provides Analytical Results Consistent with Their Intended Use
ASTM E1199-87(1998) Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
ASTM E1728/E1728M-20 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Lead Determination
ASTM E1199-19 Standard Practice for Sampling Zooplankton with a Clarke-Bumpus Plankton Sampler
ASTM D2797/D2797M-21 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D2797/D2797M-21a Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM D5139-12 Standard Specification for Sample Preparation for Qualification Testing of Coatings to be Used in Nuclear Power Plants
ASTM G186-05(2021) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
ASTM D8367-21 Standard Practice for Making a Laboratory Pavement Marking Sample Using a Pavement Marking and Drop-on Particles
ASTM E1746-17 Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM E1746-17a Standard Test Method for Sampling and Analysis of Liquid Chlorine for Gaseous Impurities
ASTM D7648/D7648M-18 Standard Practice for Active Soil Gas Sampling for Direct Push or Manual-Driven Hand-Sampling Equipment
ASTM D4532-10 Standard Test Method for Respirable Dust in Workplace Atmospheres Using Cyclone Samplers
ASTM E1806-96(2006) Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM D4354-99 Standard Practice for Sampling of Geosynthetics for Testing
ASTM D6001-05 Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
ASTM E768-99(2005) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM A610-79(2004) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM E768-99 Standard Practice for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM D202-97(2002)e1 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D1677-02 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM D1677-86(1993)e1 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM G39-99(2011) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM D4354-99(2004) Standard Practice for Sampling of Geosynthetics for Testing
ASTM A610-79(2009) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM E768-99(2010) Standard Guide for Preparing and Evaluating Specimens for Automatic Inclusion Assessment of Steel
ASTM E1806-96 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E1729-20 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
ASTM E1806-18 Standard Practice for Sampling Steel and Iron for Determination of Chemical Composition
ASTM E1994-09(2023) Standard Practice for Use of Process Oriented AOQL and LTPD Sampling Plans
ASTM E1727-20 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM D6911-03(2010) Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM D1677-02(2011) Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM D202-23 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D202-08 Standard Test Methods for Sampling and Testing Untreated Paper Used for Electrical Insulation
ASTM D4354-99(2009) Standard Practice for Sampling of Geosynthetics for Testing
ASTM D5842-14 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
ASTM D5842-17 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
ASTM D3617-07 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
ASTM E1644-04 Standard Practice for Hot Plate Digestion of Dust Wipe Samples for the Determination of Lead
ASTM D5702-07 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
ASTM D6634-01 Standard Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells
ASTM D1587-00(2007)e1 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
ASTM D2113-99 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
ASTM D4057-06 Standard Practice for Manual Sampling of Petroleum and Petroleum Products
ASTM D6634-01(2006) Standard Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells
ASTM D6518-07 Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM D2813-03 Standard Practice for Sampling Leather for Physical and Chemical Tests
ASTM C67-06 Standard Test Methods for Sampling and Testing Brick and Structural Clay Tile
ASTM D2113-06 Standard Practice for Rock Core Drilling and Sampling of Rock for Site Investigation
ASTM D1587-00 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
ASTM D1587-08 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
ASTM D6969-03(2008) Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM D6970-03(2008) Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
ASTM D1587-08(2012)e1 Standard Practice for Thin-Walled Tube Sampling of Soils for Geotechnical Purposes
ASTM D6001-96e1 Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
ASTM F1084-90(1995)e1 Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM F1084-08(2018) Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM F1084-08(2013) Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM G121-98(2015)e1 Standard Practice for Preparation of Contaminated Test Coupons for the Evaluation of Cleaning Agents
ASTM E2548-16 Standard Guide for Sampling Seized Drugs for Qualitative and Quantitative Analysis
ASTM D5702-07(2012) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
ASTM D6970-03(2013)e1 Standard Practice for Collection of Calcined Petroleum Coke Samples for Analysis
ASTM D8429-21 Standard Test Method for Legionella pneumophila in Water Samples Using Legiolert
ASTM D3976-22 Standard Practice for Preparation of Sediment Samples for Chemical Analysis
ASTM D6518-03a Standard Practice for Bias Testing a Mechanical Coal Sampling System
ASTM C322-09(2014) Standard Practice for Sampling Ceramic Whiteware Clays
ASTM D3700-14 Standard Practice for Obtaining LPG Samples Using a Floating Piston Cylinder
ASTM D6969-23 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM E716-16(2021) Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM E716-16(2021)e1 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spark Atomic Emission Spectrometry
ASTM D5911/D5911M-96(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Soil Sampling Site
ASTM E1728-99 Standard Practice for Field Collection of Settled Dust Samples Using Wipe Sampling Methods for Lead Determination by Atomic Spectrometry Techniques
ASTM G186-05(2016) Standard Test Method for Determining Whether Gas-Leak-Detector Fluid Solutions Can Cause Stress Corrosion Cracking of Brass Alloys
ASTM E1833-07a Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM E1833-96(2001) Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM E1833-96 Standard Practice for Sampling of Blister Copper in Cast Form for Determination of Chemical Composition
ASTM D5702-18 Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
ASTM A610-79(2014) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM E1727-04 Standard Practice for Field Collection of Soil Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM D2291-98 Standard Practice for Fabrication of Ring Test Specimens for Glass-Resin Composites
ASTM G38-01(2007) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM C1606-04 Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
ASTM D4896-01 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D4896-95 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM E255-07 Standard Practice for Sampling Copper and Copper Alloys for the Determination of Chemical Composition
ASTM A610-79(2000) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM G38-01 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM G38-73(1995)E1 Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM D4896-01(2008)e1 Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM F1084-08 Standard Guide for Sampling Oil/Water Mixtures for Oil Spill Recovery Equipment
ASTM D345-02(2010) Standard Test Method for Sampling and Testing Calcium Chloride for Roads and Structural Applications
ASTM G38-01(2021) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM A610-79(2019) Standard Test Methods for Sampling and Testing Ferroalloys for Determination of Size
ASTM C1606-10(2014) Standard Test Method for Sampling Protocol for TCLP Testing of Container Glassware
ASTM D7929-14 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
ASTM D6418-01 Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis
ASTM D6418-99e1 Standard Practice for Using the Disposable En Core Sampler for Sampling and Storing Soil for Volatile Organic Analysis
ASTM D6062-07 Standard Guide for Personal Samplers of Health-Related Aerosol Fractions
ASTM D6282-98 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D3614-07 Standard Guide for Laboratories Engaged in Sampling and Analysis of Atmospheres and Emissions
ASTM D6044-96 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D6044-96(2003) Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D5536-94(2004) Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
ASTM D2094-00 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM D2094-00e1 Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM D6911-03 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM D4133-82(2004) Standard Practice for Sampling Phytoplankton with Pumps
ASTM D2094-00(2006) Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM D6001-96(2002) Standard Guide for Direct-Push Water Sampling for Geoenvironmental Investigations
ASTM D4547-06 Standard Guide for Sampling Waste and Soils for Volatile Organic Compounds
ASTM D6063-96(2006) Standard Guide for Sampling of Drums and Similar Containers by Field Personnel
ASTM D2797-07 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM G39-99(2005) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM D5842-95(2000) Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
ASTM D6282-98(2005) Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D4204-00 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM E991-06 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM C823-00 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
ASTM D2797-04 Standard Practice for Preparing Coal Samples for Microscopical Analysis by Reflected Light
ASTM C823/C823M-07 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
ASTM E740-88(1995)e1 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM D3617/D3617M-16 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
ASTM G39-99 Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM D3617/D3617M-17 Standard Practice for Sampling and Analysis of Built-Up Roof Systems During Application
ASTM D6001/D6001M-20 Standard Guide for Direct-Push Groundwater Sampling for Environmental Site Characterization
ASTM G38-01(2013) Standard Practice for Making and Using C-Ring Stress-Corrosion Test Specimens
ASTM D6911-15 Standard Guide for Packaging and Shipping Environmental Samples for Laboratory Analysis
ASTM D6969-15 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM D6969-16 Standard Practice for Preparation of Calcined Petroleum Coke Samples for Analysis
ASTM D6926-16 Standard Practice for Preparation of Asphalt Mixture Specimens Using Marshall Apparatus
ASTM D7278-16 Standard Guide for Prediction of Analyzer Sample System Lag Times
ASTM G39-99(2021) Standard Practice for Preparation and Use of Bent-Beam Stress-Corrosion Test Specimens
ASTM C823/C823M-12 Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
ASTM D5702-18(2022) Standard Practice for Field Sampling of Coating Films for Analysis for Heavy Metals
ASTM D6044-21 Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D5842-19 Standard Practice for Sampling and Handling of Fuels for Volatility Measurement
ASTM D5536-17(2023) Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
ASTM E991-21 Standard Practice for Color Measurement of Fluorescent Specimens Using the One-Monochromator Method
ASTM E1675-04e1 Standard Practice for Sampling Two-Phase Geothermal Fluid for Purposes of Chemical Analysis
ASTM D4204-12 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D2094-00(2014) Standard Practice for Preparation of Bar and Rod Specimens for Adhesion Tests
ASTM C1758/C1758M-15 Standard Practice for Fabricating Test Specimens with Self-Consolidating Concrete
ASTM C903-15 Standard Practice for Preparing Refractory Specimens by Cold Gunning
ASTM C903-15e1 Standard Practice for Preparing Refractory Specimens by Cold Gunning
ASTM C823/C823M-12(2017) Standard Practice for Examination and Sampling of Hardened Concrete in Constructions
ASTM D4204-16 Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM D6282/D6282M-14 Standard Guide for Direct Push Soil Sampling for Environmental Site Characterizations
ASTM D5536-15 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
ASTM D5536-17 Standard Practice for Sampling Forest Trees for Determination of Clear Wood Properties
ASTM D4896-01(2016) Standard Guide for Use of Adhesive-Bonded Single Lap-Joint Specimen Test Results
ASTM D6044-96(2009) Standard Guide for Representative Sampling for Management of Waste and Contaminated Media
ASTM D4204-16(2023) Standard Practice for Preparing Plastic Film Specimens for a Round-Robin Study
ASTM E716-10 Standard Practices for Sampling and Sample Preparation of Aluminum and Aluminum Alloys for Determination of Chemical Composition by Spectrochemical Analysis
ASTM D6966-13 Standard Practice for Collection of Settled Dust Samples Using Wipe Sampling Methods for Subsequent Determination of Metals
ASTM D7755-11 Standard Practice for Determining the Wear Volume on Standard Test Pieces Used by High-Frequency, Linear-Oscillation (SRV) Test Machine
ASTM E1729-04 Standard Practice for Field Collection of Dried Paint Samples for Lead Determination by Atomic Spectrometry Techniques
ASTM D7986-15 Standard Practice for Preparing Specimens of Hydraulic Erosion Control Products for Index Property Testing
ASTM E1157-87(1996) Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
ASTM E1157-87(2011) Standard Specification for Sampling and Testing of Reusable Laboratory Glassware
ASTM E1729-16 Standard Practice for Field Collection of Dried Paint Samples for Subsequent Lead Determination
ASTM E1727-16 Standard Practice for Field Collection of Soil Samples for Subsequent Lead Determination
ASTM D1677-02(2007) Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM D1677-17 Standard Methods for Sampling and Testing Untreated Mica Paper Used for Electrical Insulation
ASTM D3975-93(2008) Standard Practice for Development and Use (Preparation) of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM D3975-93(2014) Standard Practice for Development and Use 40;Preparation41; of Samples for Collaborative Testing of Methods for Analysis of Sediments
ASTM E877-93(1998) Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials
ASTM E877-21 Standard Practice for Sampling and Sample Preparation of Iron Ores and Related Materials for Determination of Chemical Composition and Physical Properties
ASTM D2481-05 Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
ASTM D2481-81(2002) Standard Test Method for Accelerated Evaluation of Wood Preservatives for Marine Services by Means of Small Size Specimens
ASTM G97-18 Standard Test Method for Laboratory Evaluation of Magnesium Sacrificial Anode Test Specimens for Underground Applications
ASTM D4698-92(1996) Standard Practice for Total Digestion of Sediment Samples for Chemical Analysis of Various Metals
ASTM G49-85(2000) Standard Practice for Preparation and Use of Direct Tension Stress-Corrosion Test Specimens
ASTM F1470-01 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1470-02 Standard Guide for Fastener Sampling for Specified Mechanical Properties and Performance Inspection
ASTM F1843-09 Standard Practice for Sample Preparation of Transparent Plastic Films used on Membrane Switch Overlays for Specular Gloss Measurements
ASTM D3376-88(2009) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM D3376-88(2005) Standard Test Methods of Sampling and Testing Pulps to be Used in the Manufacture of Electrical Insulation
ASTM E947-83(1996)e1 Standard Specification for Sampling Single-Phase Geothermal Liquid or Steam for Purposes of Chemical Analysis

PL-PKN

PN BN 3743-43-1966 Przedmiotem normy s? cz?ony nadbór, stosowane do uzbrojenia rybackich narz?dzi po?owowych.
PN BN 3744-15-1967 Przedmiotem normy s? haki w?okowe (Jumper), stosowane jako sprz?t pomocniczy na statkach rybackich.

CU-NC

NC 90-01-1971 Measuring instruments. Guide for the presentation of testing standards.
NC 90-01-54-1988 Standards System for Metrological Assurance. Measuring Machines. Methods and Means of Verification

US-CFR-file

CFR 1-51.7-2014 General provisions. Part51:Incorporation by reference. Section51.7:What publications are eligible?
CFR 49-593.3-2014 Transportation. Part593:Determinations that a vehicle not originally manufactured to conform to the federal motor vehicle safety standards is eligible for importation. Section593.3:Applicability.
CFR 12-116.5-2014 Banks and Banking. Part116:Application processing procedures. Section116.5:Do the same procedures apply to all applications under this part?
CFR 49-593.10-2014 Transportation. Part593:Determinations that a vehicle not originally manufactured to conform to the federal motor vehicle safety standards is eligible for importation. Section593.10:Availability for public inspection.
CFR 30-585.211-2014 Mineral Resources. Part585:Renewable energy and alternate uses of existing facilities on the outer continental shelf. Section585.211:What is the process for competitive issuance of leases?
CFR 41-303-70.4-2013 Public contracts and property management. Part303–70:Agency requirements for payment of expenses connected with the death of certain employees and family members. Section303–70.4:Must we pay death-related expenses under this chapter if the same expenses a
CFR 43-3000.12-2014 Public Lands:Interior. Part3000:Minerals management: General. Section3000.12:What is the fee schedule for fixed fees?
CFR 40-86.1105-87-2014 Protection of Environment. Part86:Control of emissions from new and in-use highway vehicles and engines. Section86.1105-87:Emission standards for which nonconformance penalties are available.
CFR 13-121.402-2013 Business Credit and Assistance. Part121:Small business size regulations. Section121.402:What size standards are applicable to Federal Government Contracting programs?
CFR 41-302-7.102-2013 Public contracts and property management. Part302–7:Transportation and temporary storage of household goods, professional books, papers, and equipment, (pbp&e) and baggage allowance. Section302–7.102:How is the mileage distance determined under the commut

ES-AENOR

UNE 56 702 h1

American National Standards Institute （ANSI)

ANSI/ASTM D3244:2016 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
ANSI/ASTM D3244:2021 Standard Practice for Utilization of Test Data to Determine Conformance with Specifications
B11.TR1-2016 Ergonomic Guidelines for the Design, Installation and Use of Machine Tools (NOT AN AMERICAN NATIONAL STANDARD)

Japanese Industrial Standards Committee (JISC)

JIS C 8269-2-1:2000 Low-voltage fuses -- Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) -- Section I to V: Examples of types of standardized fuses for use by authorized persions
JIS Z 2383:1998 Standard specimens of metals and alloys, Determination of corrosion rate of standard specimens for the evaluation of corrosivity of atmospheres
JIS C 8269-2:2016 Low-voltage fuses -- Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) -- Examples of standardized systems of fuses A to K
JIS Z 9015-2:1999 Sampling procedures for inspection by attributes -- Part 2: Sampling plans indexed by limiting quality (LQ) for isolated lot inspection
JIS K 7152-5:2007 Plastics -- Injection moulding of test specimens of thermoplastic materials -- Part 5: Preparation of standard specimens for investigating anisotropy
JIS Z 9015-1:1999 Sampling procedures for inspection by attributes -- Part 1: Sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection

British Standards Institution (BSI)

BS HD 60269-2:2010 Low-voltage fuses. Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Examples of standardized systems of fuses A to J
BS HD 60269-3:2010 Low-voltage fuses. Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications). Examples of standardized systems of fuses A to F
BS ISO 28590:2017*BS 6001-0:2017 Sampling procedures for inspection by attributes. Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
BS EN ISO 294-5:2013 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS ISO 28004-4:2014 Security management systems for the supply chain. Guidelines for the implementation of ISO 28000. Additional specific guidance on implementing ISO 28000 if compliance with ISO 28001 is a management objective
ASTM D7365-09A(2015 Standard Practice for Sampling, Preservation and Mitigating Interferences in Water Samples for Analysis of Cyanide
BS 6001-0:2006 Sampling procedures for inspection by attributes - Introduction to the BS 6001 (ISO 2859) series of standards for sampling for inspection by attributes
BS ISO 294-5:2011 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS 6001-1:1999 Sampling procedures for inspection by attributes - Sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS 6002-3:2005 Sampling procedures for inspection by variables - Guide to double sampling schemes indexed by acceptance quality limit (AQL) for lot-by-lot inspection
BS EN ISO 294-5:2017 Plastics. Injection moulding of test specimens of thermoplastic materials. Preparation of standard specimens for investigating anisotropy
BS 88-3:2007 Low-voltage fuses - Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F
BS 6002-1:1993 Sampling procedures for inspection by variables - Specification for single sampling plans indexed by acceptable quality level (AQL) for lot-by-lot inspection

International Electrotechnical Commission (IEC)

IEC 60269-3:2010/AMD1:2013 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F
IEC 60269-3:2013 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F
IEC 60269-3-1:2004 Low-voltage fuses - Part 3-1: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Sections I to IV: Examples of types of standardized fuses
IEC 60269-3:2010 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F
IEC 60269-2:2006 Low-voltage fuses - Part 2 : Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to I
IEC 60269-2-1:1987 Low-voltage fuses. Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application). Sections I to III
IEC 60269-3:2006 Low-voltage fuses - Part 3 : Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar application) - Examples of standardized systems of fuses A to F
IEC 60269-2-1:2000 Low-voltage fuses - Part 2-1: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Sections I to V: Examples of types of standardized fuses

European Committee for Electrotechnical Standardization（CENELEC）

HD 60269-3-2010 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household and similar applications) - Examples of standardized systems of fuses A to F (Incorporates Amendment A1: 2013)

UY-UNIT

NORMA 25-1948

AT-ON

ONORM M 6230-2-1998 Natural waters for swimming purposes - Guidelines for sampling from natural and artificial surface waters for microbiological analysis to determine the suitability for swimming purposes

US-FCR

FCR 21 CFR PART 361-2014 PRESCRIPTION DRUGS FOR HUMAN USE GENERALLY RECOGNIZED AS SAFE AND EFFECTIVE AND NOT MISBRANDED: DRUGS USED IN RESEARCH
FCR 21 CFR PART 361-2013 PRESCRIPTION DRUGS FOR HUMAN USE GENERALLY RECOGNIZED AS SAFE AND EFFECTIVE AND NOT MISBRANDED: DRUGS USED IN RESEARCH

GM North America

GM GM9885P-2003 Standard Test Method for Compression Load Deflection Measurements on Weatherstrips Color is Currently Best Copy Available

International Organization for Standardization (ISO)

ISO 28590:2017 Sampling procedures for inspection by attributes - Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
ISO 2859-10:2006 Sampling procedures for inspection by attributes - Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes
ISO 5737:1983 Prints; Preparation of standard prints for optical tests
ISO 294-5:2001 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2011 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy

API - American Petroleum Institute

API PUBL 4741-2005 Collecting and Interpreting Soil Gas Samples from the Vadose Zone A Practical Strategy for Assessing the Subsurface Vapor-to-Indoor Air Migration Pathway at Petroleum Hydrocarbon Sites
API MPMS 8.4-2004 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Sampling and Handling of Fuels for Volatility Measurement (Second Edition)
API MPMS 8.4-1995 Manual of Petroleum Measurement Standards Chapter 8 - Sampling Section 4 - Standard Practice for Manual Sampling and Handling of Fuels for Volatility Measurement (First Edition; ASTM D5842)

Association Francaise de Normalisation

NF X08-011:1984 Colours. White and colour standards by reflexion.
NF T25-001:1995 Reinforced fibres. Sampling plans applicable to received batches.
NF X06-022-10:2006 Sampling procedures for inspection by attributes - Part 10 : introduction to the ISO 2859 series of standards for sampling for inspection by attributes.
NF X50-784:2008 Promotion of diversity - Human Resources policy for the promotion of diversity and the prevention of discrimination - Criteria and commitments.
NF X50-784:2016 Promotion of diversity - Human resources policy for the promotion of diversity and the prevention of discrimination - Criteria and commitments
NF T51-294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: preparation of standard specimens for investigating anisotropy
FD X30-401-1*FD CEN/TR 15310-1:2007 Characterization of waste - Sampling of waste materials - Part 1 : guidance on selection and application of criteria for sampling under various conditions
FD CEN/TR 15310-1:2007 Caractérisation des déchets - Prélèvement des déchets - Partie 1 : guide relatif au choix et à l'application des critères d'échantillonnage dans diverses conditions
NF T51-294-5*NF EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5 : preparation of standard specimens for investigating anisotropy
NF A24-003:1985 Chemical analysis of zinc ores concentrates. Accurate determination of zinc samples by X-ray fluorescence spectrometry on sample solution containing an internal standard.
NF C60-200-2:2012 Low-voltage fuses - Part 2 : supplementary requirements for fuses for use by authorised persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to J.

CZ-CSN

CSN ISO 5436:1994 Calibration specimens.Stylus instruments.Types,calibration and use of specimens

Standard Association of Australia （SAA）

AS 1289.1.2.1:1998(R2013)
AS 1289.1.2.1:1998 Methods of testing soils for engineering purposes - Sampling and preparation of soils - Disturbed samples - Standard method
AS 1289.1.3.1:1999 Methods of testing soils for engineering purposes - Sampling and preparation of soils - Undisturbed samples - Standard method

KE-KEBS

KS 08-126 Pt.2-1978 KENYA STANDARD METHODS FOR PREPARING LABORATORY TEST SAMPLES AND TEST SPECIMENS OF TEXTILE MATERIALS FOR CHEMICAL TESTS PART 2. METHODS FOR SAMPLING COTTON FABRICS FOR CHEMICAL TESTS

European Committee for Standardization (CEN)

EN ISO 294-5:2017 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy
prEN ISO 294-5 rev Plastics — Injection moulding of test specimens of thermoplastic materials — Part 5: Preparation of standard specimens for investigating anisotropy

The American Road & Transportation Builders Association

AASHTO PP 104-2021 Standard Practice for Sample Preparation and Polishing of Asphalt Mixture Specimens for Dynamic Friction Testing
AASHTO R 64-2015 Standard Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar
AASHTO T 143-2013 Standard Method of Test for Sampling and Testing Calcium Chloride for Roads and Structural Applications

Society of Automotive Engineers (SAE)

SAE AS1376A-1986 WRENCH PADS FOR FLUID FITTINGS MACHINED FROM ALTERNATE SHAPES OF MATERIAL (THIS IS A DESIGN STANDARD, NOT TO BE USED AS A PART NUMBER)
SAE AS1376-1977 WRENCH PADS FOR FLUID FITTINGS MACHINED FROM ALTERNATE SHAPES OF MATERIAL (THIS IS A DESIGN STANDARD, NOT TO BE USED AS A PART NUMBER)
SAE J2101-1991 Acoustics - Measurement of Airborne Noise Emitted by Construction Equipment Intended for Outdoor Use - Method for Determining Compliance with Noise Limits, Standard; June 1991 (ISO 4872)

Korean Agency for Technology and Standards (KATS)

KS R 1140-2001 Standard reference test specimens for calibratinga laboratory light exposure apparatus
KS F 2319-2016(2021) Standard method for soil investigation and sampling by Auger borings
KS Q ISO 2859-10:2010 Sampling procedures for inspection by attributes-Part 10:Introduction to the KS Q ISO 2859 series of standards for sampling for inspection by attributes
KS Q ISO 2859-10:2014 Sampling procedures for inspection by attributes — Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes

ISA - International Society of Automation

ISA S67.10-1994 Sample-Line Piping and Tubing Standard for Use in Nuclear Power Plants

RO-ASRO

STAS 9302/8-1985 Wood protection SAMPLINGS AND SPECIMENS SAWING FOR BIOLOGICAL TESTS

German Institute for Standardization

DIN EN 14358:2007 Timber structures - Calculation of characteristic 5-percentile values and acceptance criteria for a sample; German version EN 14358:2006
DIN VDE 0636-2:2008 Low-voltage fuses - Part 2: Supplementary requirements for fuses for use by authorized persons (fuses mainly for industrial application) - Examples of standardized systems of fuses A to I (IEC 60269-2:2006, modified); German version HD 60269-2:2007
DIN VDE 0636-3:2008 Low-voltage fuses - Part 3: Supplementary requirements for fuses for use by unskilled persons (fuses mainly for household or similar applications) - Examples of standardized systems of fuses A to F (IEC 60269-3:2006, modified); German version HD 60269-3:2
DIN 33872-1:2010-12 Information technology - Office machines - Method of specifying colour reproduction with YES/NO criteria - Part 1: Classification, terms and principles, only on CD-ROM

AASHTO - American Association of State Highway and Transportation Officials

R 64-2017 Standard Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar
R 64-2015 Standard Practice for Sampling and Fabrication of 50-mm (2-in.) Cube Specimens Using Grout (Non-Shrink) or Mortar
PP3-1994 Standard Practice for Preparing Hot Mix Asphalt (HMA) Specimens by Means of the Rolling Wheel Compactor
T146-1996 Standard Specification for Wet Preparation of Disturbed Soil Samples for Test (Nineteenth Edition)
T 146-1996 Standard Method of Test for Wet Preparation of Disturbed Soil Samples for Test
T146-1988 Standard Specification for Wet Preparation of Disturbed Soil Samples for Test (Eighteenth Edition)

Danish Standards Foundation

DS/CEN/TR 15310-1:2007 Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions
DS/EN ISO 294-5:2013 Plastics - Injection moulding of test specimens of thermoplastic materials - Part 5: Preparation of standard specimens for investigating anisotropy

AENOR

UNE-CEN/TR 15310-1:2008 IN Characterization of waste - Sampling of waste materials - Part 1: Guidance on selection and application of criteria for sampling under various conditions

VN-TCVN

TCVN 7790-10-2008 Sampling procedures for inspection by attributes.Part 10: Introduction to the ISO 2859 series of standards for sampling for inspection by attributes

VE-FONDONORMA

COVEVIV 635-1974

GM Europe

GME TM 406100-2013 Folie Foil Revision 2; English/German; This standard may be applied only for current programs. It is inactive for all future projects and without replacement

Others: