y145m1994 tolerance comparison table

y145m1994 tolerance comparison table, Total:86 items.

The international standard classification for "y145m1994 tolerance comparison table" includes: Footwear , Limits and fits , Watches .

The Chinese standard classification for "y145m1994 tolerance comparison table" includes: Footgear , Basic standards and general methods , Basic standard and general method for coating , Horology .

Taiwan Provincial Standard of the People's Republic of China

CNS 12355-1988 Contrast of MCM Gage to Diameter and Section Area
CNS 12354-1988 Contrast of Wire Gauge to Diameter and Section Area
CNS 14838-2004 Chinese character mapping table for Chinese domain names

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36935-2018 Footwear-Conversion of sizing systems

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 12989-1991 Paints and varnishes－List of equivalent terms
GB/T 17773-1999 Tolerancing of orientation and location Projected tolerance zone

Group Standards of the People's Republic of China

T/CAS 245-2016 Technical communication-list of equivalent terms

Liaoning Provincial Standard of the People's Republic of China

DB2104/T 0026-2023 Root diameter - DBH comparison table
DB21/T 2032-2012 Root diameter-diameter at breast height, ground diameter-diameter at breast height comparison table poplar
DB2104/T 0028-2023 Root diameter - DBH comparison table
DB2104/T 0029-2023 Ground diameter-diameter at breast height comparison table
DB2104/T 0025-2023 Ground diameter-diameter at breast height comparison table Oak tree
DB2104/T 0027-2023 Ground diameter-diameter at breast height comparison table
DB21/T 2031-2012 Root diameter-diameter at breast height, ground diameter-diameter at breast height comparison table Oak tree
DB2104/T 0024-2023 Root diameter-diameter at breast height comparison table Oak tree

Professional Standard - Light Industry

QB/T 4521-2013 Tolerances for watch linear dimensions up to 3mm without individual tolerance indications

未注明发布机构

DIN 55600 E:2021-11 Testing of pigments - Determination of the significance of colour differences of surface colours according to the CIELAB-formula
DIN 10976 E:2015-09 Sensory analysis - Difference from Control-Test (DfC-Test)
DIN 2769 E:2022-10 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769 E:2020-09 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication

Professional Standard - Aviation

HB 7748-2004 Requirement for selection and interrelation of dimension tolerance geometrical tolerance and surface roughness

SE-SIS

SIS SMS 506-1963 ISO-Tolerance. Shafts arranged according to tolerance class
SIS SMS 504-1963 ISO-Tolerance. Axis arranged according to tolerance position
SIS SMS 503-1963 ISO-Tolerance. Holes arranged according to tolerance position
SIS SMS 505-1963 ISO-Tolerance. Holes arranged according to tolerance class
SIS SMS 2400-1964 Tolerances for gauges. Synoptic tablefor holes and shafts
SIS SS-ISO 7737:1987 Tolerances for building - Presentation of dimensional accuracy data

Society of Automotive Engineers (SAE)

SAE AS176C-2001 Limits, Table of Limits and Lubrication Charts
SAE RS-724-1-1975 RS724 Forgings, Tolerances and Surface Condition

German Institute for Standardization

DIN 6174:1979 Colorimetric Evaluation of Colour Differences of Surface Colours According to the CIELAB Formula
DIN 5325:1973-07 Sewing machines; needle size comparison chart
DIN 10976:2016-08 Sensory analysis - Difference from Control-Test (DfC-Test)
DIN 2769:2023 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769:2023-04 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN 2769:2021 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN ISO 286-2:1990 ISO system of limits and fits; tables of standard tolerance grades and limit deviations for holes and shafts; identical with ISO 286-2:1988
DIN 55600:2008 Testing of pigments - Determination of the significance of colour differences of surface colours according to the CIELAB-formula
DIN 55600 Bb.1:2008 Testing of pigments - Determination of the significance of colour differences of surface colours according to the CIELAB-formula - Examples for calculation and test report
DIN 55600:1988 Testing of pigments; determination of the significance of colour differences of surface colours according to the CIELAB-formula

YU-JUS

JUS ISO 5459:1992 Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances

RO-ASRO

STAS 10265/1-1984 Tolerances for buildings TOLERANCE FOR ROUGH CONCRETE SURFACES
STAS 10848-1990 Gauges for surfaces position control tolerances
STAS 7391/4-1974 Tolerances of form and of position TOLERANCES OF COAXIALITY, OF CONCENTRICITY, OF SYMMETRY AND OF INTERSEGTION

SCC

NS 1557:1966 ISO tolerances and fits — Bore tolerances — Selection for general purposes
AS B69:1940 Table of approximate comparison of hardness scales
DIN 6176 E:2017 Draft Document - Colorimetric evaluation of colour differences of surface colours according to DIN99o formula
BS 6107-1:1981 Rolling bearings: tolerances-Glossary of terms
BS 969:1953 Plain limit gauges limits & tolerances
NS 1562:1972 ISO system of limits and fits — Tolerances for gauges

Korean Agency for Technology and Standards (KATS)

KS B ISO 2768-2-2014(2019) General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
KS A ISO 10578:2013 Technical drawings-Tolerancing of orientation and location-Projected tolerance zone
KS A ISO 10578:2001 Technical drawings-Tolerancing of orientation and location-Projected tolerance zone
KS B ISO 286-2:2009 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2014 ISO system of limits and fits-Part 2:Tables of standard tolerance grades and limit deviations for holes and shafts
KS B ISO 286-2:2015 Geometrical product specifications(GPS) — ISO code system fortolerances on linear sizes — Part 2: Tables of standard toleranceclasses and limit deviations for holes and shafts
KS D ISO 5193-2004(2019) Wrought aluminium and aluminium alloys－Drawn round bars－Tolerances on shape and dimensions (Symmetric plus and minus tolerances on diameter)
KS A ISO 1101:2002 Geometrical product specifications(GPS)-Geometrical tolerancing- Tolerancing of form, orientation, location and run-out
KS B 1500-2022 Basic dimensions and tolerances of steel butt-welding pipe fittings
KS A ISO 1101:2014 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out

BE-NBN

NBN S 28-002-1982 Lighting columns - Dimensions and tolerances

Japanese Industrial Standards Committee (JISC)

JIS B 0401-2:1998 ISO system of limits and fits -- Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts
JIS B 0029:2000 Technical drawings -- Tolerancing of orientation and location -- Projected tolerance zone

Danish Standards Foundation

DS/ISO 6284:1987 Tolerances for building. Indication of tolerances on building and construction drawings

International Organization for Standardization (ISO)

ISO 6284:1985 Tolerances for building; Indication of tolerances on building and construction drawings
ISO 7758:1984 Wrought copper and copper alloys; Drawn square bars; Symmetric plus and minus tolerances on width across flats and form tolerances
ISO 7757:1984 Wrought copper and copper alloys; Drawn hexagonal bars; Symmetric plus and minus tolerances on width across flats and form tolerances
ISO 3491:1984 Wrought copper and copper alloys; Drawn square bars; All minus tolerances on width across flats and form tolerances
ISO 3490:1984 Wrought copper and copper alloys; Drawn hexagonal bars; All minus tolerances on width across flats and form tolerances
ISO 7756:1984 Wrought copper and copper alloys; Drawn round bars; Symmetric plus and minus tolerances on diameter and form tolerances

VDI - Verein Deutscher Ingenieure

VDI 2730 BLATT 1-2018 Tolerances and tolerance managment for linkages - Checklists - Approach and tolls

CZ-CSN

CSN 01 4949-1976 Straight ? face splined joints. Tolerances
CSN 01 4310-1962 Matching of threads. Calculation of tolerances of medium deameter

HU-MSZT

MSZ 11023/2-1984 R. C Part Surface Measurements and Tolerancing

Association Francaise de Normalisation

NF X11-509:1983 Sieving and screening - Correspondence table of perforated sheets in control sieves
NF P02-023*NF EN ISO 6284:1999 Construction drawings. Indication of limit deviations.

TR-TSE

TS 2352-1976 TOLERANCES FOR RUILDING — VOCABULARY

GM Europe

GME OPEL 100-1974 Steel and cast steel hardness comparison table (German)

AWS - American Welding Society

IFS-87-1987 International Filler Metal Specifications Cross Reference List

PL-PKN

PN M06102-1970 Cu?ting of metals Allowonces for surlace grinding

RU-GOST R

GOST 16085-1980 Gauges for surface position checking. Tolerances

Standard Association of Australia （SAA）

AS/NZS 3827.2:1998 Lighting system performance - Accuracies and tolerances - Compliance requirements

AT-ON

ONORM M 1116-1988 Surface roughness and ISO-tolerance quality Rugosite des surfaces et qualite de tolerance ISO
ONORM E 7225-1991 Ceramic components for electrical purposes - General tolerances for dimensions, form and position tolerances

American Gear Manufacturers Association

AGMA ISO 17485-A08 SUPP:2008 Bevel Gears - ISO System of Accuracy - Tolerance Tables

AGMA - American Gear Manufacturers Association

ISO 17485-A08 SUPP:2008 Bevel Gears - ISO System of Accuracy - Tolerance Tables

SAE - SAE International

SAE AIR63-1960 O-RING SIZE & PART NUMBER CROSS-REFERENCE CHART

Others: