Waterproof coating tensile testing machine

Waterproof coating tensile testing machine, Total:99 items.

The international standard classification for "Waterproof coating tensile testing machine" includes: Waterproofing , Agricultural tractors and trailed vehicles , Paints and varnishes , Testing of metals .

The Chinese standard classification for "Waterproof coating tensile testing machine" includes: Roof and pavement waterproof and barrier material , Tractor , Basic standard and general method for coating , Nonmetal material testing machine .

Professional Standard - Building Materials

JC/T 2663-2022 Test method for water absorption of building waterproofing membrane

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16777-2008 Test methods for building waterproofing coatings
GB/T 31586.1-2015 Corrosion protection of steel structures by protective paint systems―Assessmentof,and acceptance criteria for,the adhesion/cohesion (fracture strength) of acoating―Part 1: Pull-off testing
GB/T 328.6-1989 Test methods for asphalt waterproof roll roofing--Tensile strength of asphalt
GB/T 24645-2009 Slush seal performance of tractors—Test procedures
GB/T 23446-2009 Spray polyurea waterproofing coating
GB/T 17200-1997 Requirements for tensile,flexural and compression testing machines for rubbers and plastics
GB/T 328.2-1989 Test methods for asphalt waterproofroll roofing--Saturated and coated bitumen amount of asphalt
GB/T 16777-1997 Test methods for building waterproof coatings

工业和信息化部/国家能源局

JB/T 7797-2017 Tesile testing machines for rubber and plastics

未注明发布机构

AS 1580.408.5:2006(R2016) Paints and related materials - Methods of test - Adhesion - Pull-off test

Professional Standard - Machinery

JB/T 7734-1995 Test method for mud and water tightness of tractors
JB/T 7797-1995 Rubber, Plastic Tension Testing Machine - Technical Specifications
JB/T 7734-2008 Test procedures of slush seal performance of tractors

Taiwan Provincial Standard of the People's Republic of China

CNS 8645-1988 Method of Test for Waterproofing of Buildings
CNS 10370-1983 Method of Test for Coating Ability and Water Resistance of Emulsified Asphalts

Group Standards of the People's Republic of China

T/QGCML 1078-2023 Waterproof paint application device
T/CECS 10347-2023 Waterproof and anticorrosion polyurea coating
T/QGCML 1848-2023 Waterproof paint application device for building waterproofing projects
T/CECS 10367-2024 Thin single-coat water-based inorganic zinc-rich anticorrosive coating
T/CSEM 0011-2022 Water-based inorganic fireproof coating
T/CIMA 0057-2022 Horizontal Tensile Testing Machine

Professional Standard - Chemical Industry

HG/T 2739-1995 Product quality classification of rubber and plastic tensile testing machine
HG/T 2369-1992 Specification for rubber and plastics tensile-testing equipment

Professional Standard - Textile

FZ/T 01005-1991 Test method for fixed width tensile strength of coated fabrics

RU-GOST R

GOST 32299-2013 Paint materials. Pull-off test for adhesion

SCC

BS 3900-E10:1979 Methods of test for paints-Pull-off test for adhesion
BS EN 10002-2:1992 Tensile testing of metallic materials-Verification of the force measuring system of the tensile testing machine
DANSK DS/EN ISO 16276-1:2007 Corrosion protection of steel structures by protective paint systems - Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing
NS-EN 10002-2:1991 Metallic materials — Tensile testing — Part 2: Verification of the force measuring system of the tensile testing machines
BS 3417-2:1984 Power take-off shafts and guards for tractors and machinery for agriculture and forestry-Methods for testing guards
MIL MIL-PRF-6799L-2010 Coatings, Sprayable, Strippable, Protective, Water Emulsion
ASD-STAN prEN 2002-003:1970 Test methods for metallic materials - Part 3 : Load calibration of tensile testing machines
AENOR UNE-EN 10319-1:2004 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines
NS-EN 10319-1:2003 Metallic materials — Tensile stress relaxation testing — Part 1: Procedure for testing machines
DANSK DS/EN 10319-1:2003 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines

IT-UNI

UNI 556-P7-1962 Mechanical testing of metal materials. Tensile test
UNI 5465-1965 Mechanical testing of metal materials. Steel pipe tensile test
UNI 5292-1979 Mechanical testing of ferrous materials. Tensile test of steel wire
UNI 556-P2-1979 Mechanical testing of metal materials. Tensile test. Test methods for ferrous materials
UNI 556-P5-1978 Mechanical testing of metal materials. Tensile test. Sintered metal material samples
UNI 2901-1945 Textile material testing. Fiber tensile test
UNI 5116-1963 Fabric: Experiment. Tensile test on strips
UNI 6326-1968 Tensile testing machinery. Calibration check

Standard Association of Australia （SAA）

AS 1580.408.5:2006 Paints and related materials - Methods of test - Adhesion - Pull-off test

Canadian General Standards Board （CGSB)

CGSB 1-GP-71 METH 110.12-1979 Methods of Testing Paints and Pigments Water Resistance Boiling-Water Resistance
CGSB 1-GP-71 METH 110.11-1979 Methods of Testing Paints and Pigments Water Resistance Shower Resistance
CGSB 1-GP-71 METH 24.2-1980 Test Methods for Paints and Pigments Water Content Toluene Solubility Method
CGSB 1-GP-71 METH 148.1-1978 Methodes D'Essai Des Peintures Et Pigments Resistance Au Suintement

International Organization for Standardization (ISO)

ISO 16925:2014 Paints and varnishes - Determination of the resistance of coatings to pressure water-jetting

Korean Agency for Technology and Standards (KATS)

KS B 5521-2022 Tensile testing machines
KS M ISO 16276-1-2013(2018) Corrosion protection of steel structures by protective paint systems ㅡ Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating ㅡ Part 1: Pull-off testing
KS B 5536-2022 Creep testing machines for tensile stress of metallic materials
KS B 5536-2002(2017) Creep testing machines for tensile stress of metallic materials
KS B 5536-2002(2022) Creep testing machines for tensile stress of metallic materials
KS M ISO 16276-1-2023 Corrosion protection of steel structures by protective paint systems — Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating — Part 1: Pull-off testing
KS M 5981-2001 Testing Method for cross cut of film of paints
KS M 5464-1984 Test method for water absorption of paint

HU-MSZT

MSZ 9640/42-1984 Coatings and coating system testing. Anti-corrosion ability in water
MSZ 21165-1957 Anti-collision test of oil-based coatings, lacquers and glazes

European Committee for Standardization (CEN)

EN 10002-2:1991 Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
EN 10319-1:2003 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines

British Standards Institution (BSI)

BS EN 10002-2:1992(1998) Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines
24/30453613 DC BS EN ISO 16276-1 Corrosion protection of steel structures by protective paint systems. Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating - Part 1: Pull-off testing
BS EN 10319-1:2003 Metallic materials. Tensile stress relaxation testing. Procedure for testing machines
BS EN 10319-1:2003(2016) Metallic materials. Tensile stress relaxation testing. Procedure for testing machines
BS EN 13144:2018 Metallic and other inorganic coatings. Method for quantitative measurement of adhesion by tensile test
BS EN ISO 7500-2:2006 Metallic materials. Verification of static uniaxial testing machines - Tension creep testing machines. Verification of the applied force

American Society for Testing and Materials (ASTM)

ASTM D5179-02 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM D5179-98 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM D5385-93(2006) Standard Test Method for Hydrostatic Pressure Resistance of Waterproofing Membranes
ASTM D5179-02(2008) Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM C1306/C1306M-08(2016)e1 Standard Test Method for Hydrostatic Pressure Resistance of a Liquid-Applied Waterproofing Membrane
ASTM D2370-98(2002) Standard Test Method for Tensile Properties of Organic Coatings
ASTM D2370-98 Standard Test Method for Tensile Properties of Organic Coatings
ASTM D5401-03(2014) Standard Test Method for Evaluating Clear Water Repellent Coatings on Wood
ASTM D4938-89(1996) Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
ASTM D4938-89(2002) Standard Test Method for Erosion Testing of Antifouling Paints Using High Velocity Water
ASTM D4964-96(2008)e2 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)

Association Francaise de Normalisation

NF A03-002:1991 METALLIC MATERIALS. TENSILE TESTING. PART 2 : VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINES. (EUROPEAN STANDARD EN 10002-2).

German Institute for Standardization

DIN 51302-2:2000 Materials testing machines - Strain cylinder test method for compression testing machines for concrete
DIN EN 10319-1:2003-09 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines; German version EN 10319-1:2003
DIN EN 10319-1:2003 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines; German version EN 10319-1:2003

SE-SIS

SIS SS-EN 10 002-2-1992 Meta I lic materials — Tensile testing — Part 2: Verification of the force measuring system of the tensile testing machines

Underwriters Laboratories (UL)

UL 1715-2022 Fire test of interior finish material
UL 1715-1994 Fire test of interior finish material

BE-NBN

NBN-EN 10002-2-1992 Metallic materials - Tensile testing - Part 2 : Verification of the force measuring system of the tensile testing machines

Indonesia Standards

SNI 06-6770-2002 Test methods of fire retardant paint

AT-ON

ONORM EN 10002-2-1993 Metalhc materials - Tensile test - Part 2: Venfication of the force measuring system of the tensile testing machines

Association of German Mechanical Engineers

DVS 2226-4-1998 Testing of joints on waterproof sheeting made of polymer materials - Creep tension test on polyethylene

GSO

OS GSO ISO 16276-1:2013 Corrosion protection of steel structures by protective paint systems – Assessment of, and acceptance criteria for, the adhesion/cohesion (fracture strength) of a coating – Part 1: Pull-off testing

Japanese Industrial Standards Committee (JISC)

JIS K 6404-8:1999 Testing methods for rubber-or plastics-coated fabrics -- Part 8: Water-repelling test

ES-AENOR

UNE 104-281 Pt.5-8-1986 Waterproof asphalt and modified asphalt materials. Coatings and adhesives. experiment method. Moisture content

RO-ASRO

STAS SR EN 10002-2-1995 Metallic materials. Tensile testing. Part 2 : Verification of the force measuring system of the tensile testing machines

Lithuanian Standards Office

LST EN 10319-1-2004 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines

AENOR

UNE-EN 10319-1:2004 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines

ZA-SANS

SANS 7500-2:2009 Metallic materials - Verification of static uniaxial testing machines Part 2: Tension creep testing machines - Verification of the applied force

Danish Standards Foundation

DS/EN 10319-1:2003 Metallic materials - Tensile stress relaxation testing - Part 1: Procedure for testing machines

CH-SNV

SNV 95825-1950 Plastic (organic plastic) material testing. Pull test