Vacuum sealing tester testing principle

Vacuum sealing tester testing principle, Total:125 items.

The international standard classification for "Vacuum sealing tester testing principle" includes: Power stations in general , Binders. Sealing materials .

The Chinese standard classification for "Vacuum sealing tester testing principle" includes: Electric power testing technique , Sealing material .

Group Standards of the People's Republic of China

T/CNFIA 177-2023 Vacuum attenuation method for non-destructive testing of sealing properties of food packaging
T/QGCML 4542-2024 Exosome storage tank sealing tester
T/CPF 0083-2024 Test method for tightness of flexible packaging—Vacuum decay method

Professional Standard - Electricity

DL/T 1290-2013 Test Methods for Vacuum Tightness of Direct Air-cooled Unit
DL/T 846.9-2004 General technical specifications for high voltage test equipments Part 9: Vacuum interrupter detector

未注明发布机构

ASTM RR-D04-1020 2003 D6752/D6752M-Test Method for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
DIN EN ISO 13056 E:2017-06 Test method for tightness of hot and cold water pressure systems in plastic piping systems under vacuum (draft)
ASTM RR-D02-1257 1990 D5002- Test for Determination of Density in Crude Oils by Digital Analyzer

Military Standard of the People's Republic of China-Commission of Science,Technology and Industry for National Defence

GJB 5496.7-2005 Test method of aerial bomb Part 7:General inspection-Tightness
GJB 3196.10A-2005 Test methods of cartridge.Part 10:Leakage test of packing iron box-Vacuum pumping method

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 13477.4-2017 Test method for building sealants―Part 4:Determination of extrudability of one-component sealants

Professional Standard - Electron

SJ/T 10871-1996 Methods of measurement for electrical properties of disk-seal tubes - Methods of measurement for the three tone inter-modulation distortion

National Metrological Technical Specifications of the People's Republic of China

JJF 2096-2024 Calibration Specification for Leaks in Sealed Flexible Packages Testers

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 13477.4-2002 Test method for building sealants Part 4: Determination of extrudability of one-component sealants

Military Standard of the People's Republic of China-General Armament Department

GJB 8699.7-2015 Aerial Bomb Test Methods Part 7: General Testing of Sealing Properties

International Organization for Standardization (ISO)

ISO 27895:2009 Vacuum technology - Valves - Leak test
ISO 13056:2011 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
ISO/TS 20175:2018 Vacuum technology - Vacuum gauges - Characterization of quadrupole mass spectrometers for partial pressure measurement

British Standards Institution (BSI)

BS ISO 27895:2009 Vacuum technology - Valves - Leak test
BS ISO 27895:2010 Vacuum technology. Valves. Leak test
BS EN IEC 60068-2-17:2023 Environmental testing - Tests. Test Q: Sealing
BS EN 60068-2-17:1995 Environmental testing. Test methods. Test Q. Sealing
BS ISO 5119:2023 Low temperature sealing capability of elastomeric seals. Test methods
BS EN ISO 13056:2018 Plastics piping systems. Pressure systems for hot and cold water. Test method for leaktightness under vacuum
22/30423707 DC BS ISO 5119. Low Temperature Sealing Capability of Elastomeric Seals. Test Methods
BS EN 14187-9:2019 Cold applied joint sealants. Test methods. Function testing of joint sealants

American Society for Testing and Materials (ASTM)

ASTM F19-64(2005)e1 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
ASTM D6857/D6857M-23 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857-09 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857-03 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-11 Standard Test Method for Maximum Specific Gravity and Density of Bituminous Paving Mixtures Using Automatic Vacuum Sealing Method
ASTM D6857/D6857M-17 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM F19-11(2016) Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
ASTM D6857/D6857M-18 Standard Test Method for Maximum Specific Gravity and Density of Asphalt Mixtures Using Automatic Vacuum Sealing Method
ASTM F19-21 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
ASTM F19-11 Standard Test Method for Tension and Vacuum Testing Metallized Ceramic Seals
ASTM D6752/D6752M-11 Standard Test Method for Bulk Specific Gravity and Density of Compacted Bituminous Mixtures Using Automatic Vacuum Sealing Method

BSI

VDI 6230 BLATT 1-2024 Measurement of liquid tightness with air testing systems

ES-UNE

UNE-EN ISO 13056:2019 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)

AENOR

UNE-EN 12294:2000 PLASTICS PIPING SYSTEMS. SYSTEMS FOR HOT AND COLD WATER. TEST METHOD FOR LEAKTIGHTNESS UNDER VACUUM
UNE-EN 60068-2-17:1996 ENVIRONMENTAL TESTING. PART 2: TESTS. TEST Q: SEALING.

German Institute for Standardization

DIN EN ISO 13056:2018-12 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011); German version EN ISO 13056:2018
DIN EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
DIN 51350-1:2015-03 Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN EN 60512-14-6:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing (IEC 60512-14-6:2006); German version EN 60512-14-6:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this standard unt...
DIN EN 60512-14-2:2006-11 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage (IEC 60512-14-2:2006); German version EN 60512-14-2:2006 / Note: DIN IEC 60512-7 (1994-05) remains valid alongside this stand...

Korean Agency for Technology and Standards (KATS)

KS F 2495-2017 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2495-2012 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS B 6846-1999(2019) Test code of vacuum heat treatment furnace
KS F 2495-2022 Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2495-2017(2022) Testing method for maximum specific gravity and density of asphalt mixtures using automatic vacuum sealing method
KS F 2496-2017 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS F 2496-2022 Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS B ISO 3056:2013 Non－calibrated round steel link lifting chain and chain slings－Use and maintenance
KS B ISO 3056:2005 Non-calibrated round steel link lifting chain and chain slings-Use and maintenance
KS F 2496-2017(2022) Testing method for bulk specific gravity and density of compacted asphalt mixtures using automatic vacuum sealing method
KS M ISO 9727-6:2020 Cylindrical cork stoppers — Physical tests —Part 6: Determination of liquid tightness
KS B 5648-2002(2017) Pressure test method and vacuum vessel leak detection methodusing mass spectrometer

PT-IPQ

E 221-1968 Filter. Tightness test
E 317-1978 Paints and varnishes. Stability test. Heat treatment in a sealed space

Association Francaise de Normalisation

NF EN 60068-2-17:1995 Essais d'environnement - Partie 2 : essais - Essai Q : étanchéité.
NF EN IEC 60068-2-17:2023 Essais d'environnement - Partie 2-17 : essais - Essai Q : étanchéité
NF ISO 5119:2023 Low Temperature Sealing Ability of Elastomeric Seals – Test Methods
NF A09-492:1989 Non destructive testing. Tightness testing. Method under vacuum with tracer gras.
NF EN 12835:2001 Watertight closures - Air permeability test
NF EN 3102:2014 Aerospace Series - Sealants - Test Methods - Determination of Low Temperature Flexibility
NF EN 60512-14-6:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-6 : essais d'étanchéité - Essai 14f : étanchéité interfaciale
NF T54-941*NF EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum
NF R80-101:1980 Plastics - Tightness test - Torque wrench method.
NF EN 60512-14-2:2006 Connecteurs pour équipements électroniques - Essais et mesures - Partie 14-2 : essais d'étanchéité - Essai 14b : étanchéité - Micro-fuite d'air

(U.S.) Ford Automotive Standards

FORD FLTM BJ 012-2-2001 VACUUM DIAPHRAGM COMPATIBILITY TEST

SCC

BS 2011-2.1Q:1981 Environmental testing. Tests-Test Q. Sealing
NS-EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011)
NS-EN 12294:1999 Plastics piping systems — Systems for hot and cold water — Test method for leaktightness under vacuum
DANSK DS/EN ISO 13056:2018 Plastics piping systems – Pressure systems for hot and cold water – Test method for leaktightness under vacuum (ISO 13056:2011)
DANSK DS/EN 12294:1999 Plastics piping systems – Systems for hot and cold water – Test method for leaktightness under vacuum
AENOR UNE-EN 12294:2000 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
DIN EN ISO 13056 E:2017 Draft Document - Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum (ISO 13056:2011); German and English version prEN ISO 13056:2017
BS 2011-2.1Q:1977 Basic environmental testing procedure-Part 2-17. Tests. Test Q: Sealing
DANSK DS/EN 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
10/30188859 DC BS ISO 19892. Plastics piping systems. Systems for hot and cold water. Test method for leaktightness under vacuum
CEI EN 60512-14-6:2007 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
CEI EN 60068-2-17:1997 Environmental testing - Part 2: Tests - Test Q: Sealing
DIN 51350-1 E:2014 Draft Document - Testing of lubricants - Testing in the four-ball tester - Part 1: General working principles
CEI EN 60512-14-2:2007 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
AASHTO TP 86-2010(2016) Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers Using a Vacuum Oven
DIN EN 3102 E:2012 Draft Document - Aerospace series - Sealants - Test methods - Determination of low-temperature flexibility; German and English version FprEN 3102:2012

IN-BIS

IS 10236 Pt.18-1988 Basic Climatological and Durability Testing Procedures for Optical Instruments Part 18 Sealing Testing

NO-SN

NS 3550-1986 Testing tightness of sewers and manholes by means of air

GM Europe

GME L-0-3-2013 Rotary Shaft Seal Durability Test (Revision 6; English/German; Includes Appendix A,B,C,D and E)

SAE - SAE International

SAE AS5127-1997 Methods for Testing Aerospace Sealants

YU-JUS

JUS N.A5.864-1985 Basic environmental testing procedures. Test Qk: Sealing, tracer gas method with mass spectrometer

Lithuanian Standards Office

LST EN 12294-2002 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum

RO-ASRO

STAS SR ISO 9978:1996 Radiation protectlon - Sealed redioactive sources Leakage test methods

Danish Standards Foundation

DS/EN 12294:2000 Plastics piping systems - Systems for hot and cold water - Test method for leaktightness under vacuum
DS/EN 60512-14-6:2006 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing

GSO

GSO ISO 9727-6:2014 Cylindrical cork stoppers -- Physical tests -- Part 6: Determination of liquid tightness
OS GSO IEC 60512-14-6:2015 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
BH GSO IEC 60512-14-6:2016 Connectors for electronic equipment - Tests and measurements - Part 14-6: Sealing tests - Test 14f: Interfacial sealing
GSO IEC 60512-14-2:2015 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
BH GSO IEC 60512-14-2:2016 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
OS GSO IEC 60512-14-2:2015 Connectors for electronic equipment - Tests and measurements - Part 14-2: Sealing tests - Test 14b: Sealing - Fine air leakage
GSO ISO 13056:2013 Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum
BH GSO ISO 13056:2016 Plastics piping systems -- Pressure systems for hot and cold water -- Test method for leaktightness under vacuum

GM North America

GM GM9015P-1988 Test for Weldability of Weld Through Sealers
GM GM9014P-1988 Test for Weld Through Sealers
GM GM9691P-1997 Wear Resistance Test for Weatherstrip

CEN - European Committee for Standardization

EN ISO 13056:2018 Plastics piping systems - Pressure systems for hot and cold water - Test method for leaktightness under vacuum

The American Road & Transportation Builders Association

AASHTO TP 86-2010 Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers Using a Vacuum Oven
AASHTO T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

PREN 3102-1996 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility
PREN 3102-2000 Aerospace Series Sealants Test Methods Determination of Low-Temperature Flexibility (Edition P 1)

FI-SFS

SFS 3410-1978 plastic pipe. Joint tightness test

Standard Association of Australia （SAA）

AS IEC 60068.2.17:2023 Environmental testing, Part 2.17: Tests — Test Q: Sealing
AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density
IEC 60068-2-17:2023 Environmental testing — Part 2-17: Tests — Test Q: Sealing

AASHTO - American Association of State Highway and Transportation Officials

T 331-2010 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2008 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Hot Mix Asphalt (HMA) Using Automatic Vacuum Sealing Method
T 331-2007 Standard Method of Test for Bulk Specific Gravity and Density of Compacted Asphalt Mixtures Using Automatic Vacuum Sealing Method
TP 86-2010 Standard Method of Test for Accelerated Aging of Bituminous Sealants and Fillers with a Vacuum Oven (Revision 1)

KR-KS

KS M ISO 9727-6-2020 Cylindrical cork stoppers — Physical tests —Part 6: Determination of liquid tightness

BELST

STB GOST R 51827-2002 Packagings. Leak-proofness and hydraulic pressure testing methods

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 60068-2-17:2023 Environmental testing - Part 2-17: Tests - Test Q: Sealing

American National Standards Institute （ANSI)

ANSI/ASME PTC12.1-2000 Performance Test Code - Closed Feedwater Heaters

Others: