Li's phone number
Li's phone number, Total:177 items.
The international standard classification for "Li's phone number" includes: Ground service and maintenance equipment .
The Chinese standard classification for "Li's phone number" includes: Special vehicles .
Taiwan Provincial Standard of the People's Republic of China
- CNS 7891-1987 Spark Plugs with Resistor for Automobile Water - Cooled Engines
- CNS 7667-1981 Cylinder Head Gaskets for Automobile Engines
- CNS 7136-1985 Cylinder Liners for Automobile Engines (Cast Iron)
- CNS 9585-1982 Electric Engine Tachometers for Automobiles
- CNS 8581-1982 Internal Wirings of Marine Engine Remote Control Console
- CNS 9174-1983 Connecting Rod of Engine for Motor Cycle
- CNS 3102-1986 Sleeve Type Half Bearing for the Crankshaft of Automobile Engines
- CNS 6723-1980 Bracket Arm for Electric Dental Engine
- CNS 2935-1995 Piston Pins for Automobile Engines
- CNS 5585-1980 Method of Test for Boiling Point of Engine Coolants
- CNS 6724-1989 Electric Dental Engines
- CNS 6720-1980 Wrist and Slip - Joint K}tsfor Electric Dental Engine
- CNS 9055-1988 Engine Tachometers for Construction Machinery
- CNS 8582-1982 Internal Pipings of Marine Engine Remote Control Console
- CNS 6722-1989 Stand for Movable Electric Dental Engine
- CNS 6721-1980 Belts for Electric Dental Engines
- CNS 8580-1982 Outline Dimensions of Marine Engine Remote Control Consoles
Professional Standard - Civil Aviation
- MH/T 6048-2008 Baggage towing tractor
Anhui Provincial Standard of the People's Republic of China
- DB34/T 2495-2015 car engine protectant
中国民用航空局
- MH/T 6048-2020 Luggage/cargo tractor
Group Standards of the People's Republic of China
- T/BAGIA 0004-2019 HTML5 game engine platform docking interface
- T/CASME 1358-2024 Search engine data processing specifications
- T/QGCML 1204-2023 Knowledge engine intelligent management system
Hubei Provincial Standard of the People's Republic of China
- DB42/T 1507-2019 Distributed Spatial Data Engine Technical Specifications
IN-BIS
- IS 5941-1970 Specification for electric dental engines
- IS 5655-1970 Specification for foot-operated dental engines
AR-IRAM
- IRAM 2094-1954 Low power single phase electric engine
- IRAM 2140-1959 Electrolytic capacitors for electric engine starting
Society of Automotive Engineers (SAE)
- SAE ARP1804-1989 ELECTRIC BAGGAGE/CARGO TRACTOR
- SAE ARP1804-1983 Electric Baggage/Cargo Tractor
- SAE ARP1804A-2011 Electric Baggage/Cargo Tractor
- SAE ARP1804B-2022 Electric Baggage/Cargo Tractor
- SAE AMS2570A-1945 PRESERVATION OF ENGINES
- SAE J362-1997 Vehicle Hood Latch Systems
- SAE AS5205-2000 Nut, fitting, engine, flared
- SAE AS3494A-2014 GASKET - TYPE XIII ENGINE ACCESSORY DRIVE
- SAE AS4556-2-1953 AS4556 Hood Jettison Release Handle
- SAE J129-2010 Engine and Transmission Identification Numbers
- SAE AIR1537A-1996 Report on Aircraft Engine Containment
- SAE AIR4979-1996 Estimation of Measurement Uncertainty in Engine Tests Based on NATO AGARD Uniform Engine Test Program
Underwriters Laboratories (UL)
- UL 2200-1998 UL Standard for Safety Stationary Engine Generator Assemblies First Edition; Reprint with revisions through and including July 7, 2004.
SAE - SAE International
- SAE ARP1804B-2017 Electric Baggage/Cargo Tractor
- SAE R-188-1997 The Romance of Engines
- SAE AMS2570B-1990 PRESERVATION OF ENGINES
- SAE AMS2574A-1990 PRESERVATION OF ENGINES (LIMITED PERIOD)
- SAE AMS2574-1943 PRESERVATION OF ENGINES (Limited Period)
- SAE J362-1982 VEHICLE HOOD LATCH SYSTEMS
- SAE AIR4096-1989 Helicopter Engine Foreign Object Damage
- SAE R-109-1991 Engine Revolutions: The Autobiography of Max Bentele
- SAE J362-1969 VEHICLE HOOD LATCH SYSTEMS
- SAE AIR1850-1989 Twin Engine Helicopter Power Requirements
GM Europe
- GME L 000 0434-2003 Wv Engine Paint
- GME QE 001215-1992 Elastomer f黵 Motord鋗pfungsblock Elastomer for Engine-Damping-Block English/German
U.S. Air Force
- AIR FORCE MIL-S-26547 C NOTICE 1-1995 STARTER-GENERATOR ENGINE STU-6A
- AIR FORCE MIL-S-26547 C-1985 STARTER-GENERATOR ENGINE STU-6A
- AIR FORCE QPL-25482-QPD-2011 Indicator, Engine Testing
- AIR FORCE QPL-6529-24 NOTICE 1-2001 CORROSION PREVENTIVE, AIRCRAFT ENGINE
- AIR FORCE QPL-6529-24-1999 CORROSION PREVENTIVE, AIRCRAFT ENGINE
- AIR FORCE MIL-I-25482 D VALID NOTICE 2-2008 Indicator, Engine Testing
- AIR FORCE MIL-G-6464 (2)-1959 GENERATOR, ALTERNATING CURRENT, AIRCRAFT ENGINE DRIVEN, TYPE C-7
- AIR FORCE MIL-G-6464-1951 GENERATOR, ALTERNATING CURRENT, AIRCRAFT ENGINE DRIVEN, TYPE C-7
- AIR FORCE A-A-58023 VALID NOTICE 1-2012 Analyzer, Gasoline Engine Exhaust
- AIR FORCE MIL-T-27179 B VALID NOTICE 2-2008 Transmitter, Rate of Flow, TRU-27/A, Engine
- AIR FORCE QPL-6081-30-1999 LUBRICATING OIL, JET ENGINE
- AIR FORCE MIL-I-7085 C VALID NOTICE 2-2008 Indicator, Pressure, Engine, 0-50 PSI
U.S. Military Regulations and Norms
- ARMY A-A-59294 VALID NOTICE 1-2008 Starters, Engine, Electrical: 24-Volt Direct-Current
- ARMY A-A-52492 A-2009 SEAL, ENGINE SHROUD
- ARMY A-A-52624 A-2001 ANTIFREEZE, MULTI-ENGINE TYPE
- ARMY MIL-DTL-62006 C-1998 COOLER, OIL: TRANSMISSION AND ENGINE
- ARMY MIL-PRF-62259B-1998 RADIATOR: ENGINE COOLANT
- ARMY A-A-52155 B VALID NOTICE 1-2008 Engine Accessory Drive V-Belts
- ARMY MIL-DTL-62006 C VALID NOTICE 1-2008 Cooler, Oil: Transmission and Engine
- ARMY QPL-46167-QPD-2010 LUBRICATING OIL, INTERNAL COMBUSTION ENGINE, ARCTIC
- ARMY MIL-PRF-46167 D VALID NOTICE 1-2010 Lubricating Oil, Internal Combustion Engine, Arctic
- ARMY MS24544 REV H-1986 INDICATOR, LIQUID QUANTITY: 24 VOLT DC, ENGINE FUEL
- ARMY MS24544 REV H VALID NOTICE 2-2000 INDICATOR, LIQUID QUANTITY: 24 VOLT DC, ENGINE FUEL
US-FCR
- FCR FED H-08-4 VOL 3 SEC II 624.1-1988 HOOD TYPE "B"
- FCR 40 CFR PART 1051-2014 CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES
- FCR 40 CFR PART 1051-2013 CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES
- FCR 40 CFR PART 1051-2015 CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES
TN-INNORPI
- NT AB 024-1970 Engine appliances for household and similar purposes
- NT AB 043-1972 Engine appliances for household and similar purposes
United States Navy
- NAVY MS9243 NOTICE 1-1996 COVER - ENGINE ACCESSORY DRIVE
- NAVY MS9243-1960 COVER - ENGINE ACCESSORY DRIVE
- NAVY MIL-C-5546 A (1)-1951 COMPOUND, ENGINE CLEANING (CRESOL BASE)
- NAVY MIL-C-5546 A-1950 COMPOUND, ENGINE CLEANING (CRESOL BASE)
- NAVY QPL-17869-62-1996 PUMPS AND MOTORS, POWER, OIL HYDRAULIC (NAVAL SHIPBOARD USE)
- NAVY QPL-15719-26-2005 LUBRICATING GREASE, (HIGH TEMPERATURE, ELECTRIC MOTOR, BALL AND ROLLER BEARINGS)
- NAVY QPL-85704-8-1998 CLEANING COMPOUND, TURBINE ENGINE GAS PATH
- NAVY MIL-L-15719 A-1952 LUBRICATING GREASE (HIGH-TEMPERATURE, ELECTRIC MOTOR, BALL AND ROLLER BEARINGS)
- NAVY MIL-L-15719 A (3)-1961 LUBRICATING GREASE (HIGH-TEMPERATURE, ELECTRIC MOTOR, BALL AND ROLLER BEARINGS)
- NAVY MIL-PRF-85036 B-1999 BARRIER MATERIALS, HEAVY DUTY, FOR FLEXIBLE ENGINE CONTAINERS
- NAVY QPL-19557-30-1988 STARTER: AIRCRAFT ENGINE, AIR TURBINE
- NAVY AND10002 REV 2-1949 MOUNTING PAD AND DRIVE - AIRCRAFT ENGINE GENERATOR AND POWER TAKE-OFF [Use: AIR FORCE AND20002 REV 3 CANC NOTICE 1, AIR FORCE AND20002 REV 3]
- NAVY MIL-G-24477 NOTICE 1-1998 GENERATOR SET, DIESEL ENGINE ALTERNATING CURRENT (NAVAL) SHOW 180 55
- NAVY MIL-G-24477-1972 GENERATOR SET, DIESEL ENGINE ALTERNATING CURRENT (NAVAL) SHOW 180 55
(U.S.) Ford Automotive Standards
- FORD M2C10-A-2009 OIL, LUBRICATING - ENGINE - HEAVY DUTY
- FORD M2C1-A-2009 OIL, LUBRICATING - ENGINE - HEAVY DUTY
- FORD M2C170-A-2009 OIL - ENGINE, LUBRICATING, SYNTHETIC
- FORD ESE-M4G116-A-2000 SEALER, ENGINE AND CHASSIS - LIGHT
GM North America
- GM 9985619-1994 Adhesive, Hood Mastic
- GM GM2767M-2003 Non Woven Polyester - Underhood
- GM 9984261-2003 Waterborne Coating, Underhood and Undervehicle
- GM GM8101G-1998 Undervehicle and Underhood Component Rating Scale
- GM 9985282-1980 Sealant Adhesive, Elastomeric, Hood
- GM 9985525-1997 Enamel, Engine, Two Component, Epoxy (Black)
CZ-CSN
- CSN 09 4851-1960 Decompression valve for stationary engines
- CSN 30 0412-1979 Tractor cngincs. Basic specificatioiís
- CSN 31 5771-1956 Engine shaft outlet. design policy
AENOR
- UNE 27620:1962 SHIPBUILDING. WHIPS FOR ENGINE ROOMS.
- UNE 22010:1990 WINCH ENGINES TO 60 KN OF STRENGTH.
International Organization for Standardization (ISO)
- ISO/TR 23846:2022 Biomimetics — Image search engine
ES-AENOR
- INTA 15 21 01 Aircraft engine lubricant "Type 120"
SCC
- BS PD ISO/TR 23846:2022 Biomimetics. Image search engine
- CIE 235:2019 Optical Measurement of LED Modules and Light Engines
British Standards Institution (BSI)
- PD ISO/TR 23846:2022 Biomimetics. Image search engine
- BS EN 12601:2010 Reciprocating internal combustion engine driven generating sets. Safety
- BS ISO 8528-2:2018 Reciprocating internal combustion engine driven alternating current generating sets. Engines
Korean Agency for Technology and Standards (KATS)
- KS R 3012-2005(2010) Cylinder head gaskets for automobile engines
American National Standards Institute (ANSI)
- ANSI/UL 2200a-2013 Standard for Safety for Stationary Engine Generator Assemblies
- ANSI/UL 2200-2013 Standard for Safety for Stationary Engine Generator Assemblies
American Society for Testing and Materials (ASTM)
- ASTM D4485-06a Standard Specification for Performance of Engine Oils
- ASTM D4485-05a Standard Specification for Performance of Engine Oils
- ASTM D4485-01a Standard Specification for Performance of Engine Oils
- ASTM D4485-00 Standard Specification for Performance of Engine Oils
- ASTM D4485-05 Standard Specification for Performance of Engine Oils
- ASTM D4485-01 Standard Specification for Performance of Engine Oils
- ASTM D4485-05e1 Standard Specification for Performance of Engine Oils
- ASTM D4485-02 Standard Specification for Performance of Engine Oils
Defense Logistics Agency
- DLA MIL-T-46786 B-1990 TANKS, FUEL, ENGINE: GENERAL REQUIREMENTS FOR
- DLA MIL-T-46786 B NOTICE 1-1999 TANKS, FUEL, ENGINE: GENERAL REQUIREMENTS FOR
- DLA MIL-T-5494 VALID NOTICE 2-2005 THERMOCOUPLE, CONTACT, AIRCRAFT ENGINE SPARK PLUG GASKET TYPE
- DLA MIL-T-5494 A-1956 THERMOCOUPLE, CONTACT, AIRCRAFT ENGINE SPARK PLUG GASKET TYPE
- DLA MS500040 REV J-1991 TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL
- DLA MIL-T-5494 A NOTICE 1-1999 THERMOCOUPLE, CONTACT, AIRCRAFT ENGINE SPARK PLUG GASKET TYPE
- DLA MS500040 REV J REINST NOTICE 3-2006 TRANSMITTER, LIQUID QUANTITY, FLOAT TYPE, ENGINE FUEL
- DLA SMD-5962-96699 REV A-2002 MICROCIRCUIT, LINEAR, DC MOTOR PULSE WIDTH MODULATOR, MONOLITHIC SILICON
- DLA QPL-15160-69-2007 FUSES, INSTRUMENT, POWER, AND TELEPHONE GENERAL SPECIFICATION FOR
HU-MSZT
- MNOSZ 6468-1951 Motor vehicle engines and chassis
- MNOSZ 1655-1951 (Stable) Engine and shipping conditions received
AIA/NAS - Aerospace Industries Association of America Inc.
- NAS423-1952 Master and Ignition Switch - Single Engine
Association Francaise de Normalisation
- NF J95-038*NF ISO 13592:1998 Small craft. Backfire flame control for petrol engines.
- NF R16-506:1975 Oil filters screwed on thermal engines-test methods.
- NF R11-503:1975 Thermal engine test code. Gross power measurement.
YU-JUS
- JUS M.F2.029-1983 Agricultural tractors and machines. Engine test code (bench test). Net povver
- JUS B.H8.218-1979 Mineral oils. Petter A V1engine testing
- JUS M.F2.033-1982 Reciprocating Internat combustion engines. Definitions oflocation on an engine
- JUS H.Z8.057-1984 Tasting of angine antifreezes. Datarminavon of foaming tendencies
- JUS M.F2.027-1983 Road vehicles. Mopeds — Engine test code. Net power
- JUS H.Z8.052-1984 Testing ofengine antifreezes. Determination of pH value
- JUS M.F2.025-1982 Road vehicles. Engine testcode. Net power
ITU-R - International Telecommunication Union/ITU Radiocommunication Sector
- ITU-R BT.1722-2 FRENCH-2011 Harmonization of the instruction set for the execution engine for interactive TV applications
- ITU-R BT.1722-1 SPANISH-2007 Armonización del conjunto de instrucciones del motor de ejecución para las aplicaciones de televisión interactiva
- ITU-R BT.1722-1-2007 Harmonization of the instruction set for the execution engine for interactive TV applications
European Committee for Standardization (CEN)
- EN 12601:2010 Reciprocating internal combustion engine driven generating sets - Safety
- EN 12601:2001 Reciprocating Internal Combustion Engine Driven Generating Sets - Safety
FMVSS - Federal Motor Vehicle Safety Standards
- 49 CFR 571 113-2012 Standard No. 113; Hood latch system
- 49 CFR 571 113-2018 Standard No. 113; Hood latch system
- 49 CFR 571 113-2013 Standard No. 113; Hood latch system
- 49 CFR 571 113-2017 Standard No. 113; Hood latch system
- 49 CFR 571 113-2015 Standard No. 113; Hood latch system
- 49 CFR 571 113-2010 Standard No. 113; Hood latch system
- 49 CFR 571 113-2016 Standard No. 113; Hood latch system
- 49 CFR 571 113-2011 Standard No. 113; Hood latch system
- 49 CFR 571 113-2009 Standard No. 113; Hood latch system.
- 49 CFR 571 113-2014 Standard No. 113; Hood latch system
Japanese Industrial Standards Committee (JISC)
- JIS D 1000:2009 Motorcycles -- Engine test code -- Net power
GB-REG
- REG 40 CFR PART 1051-2011 CONTROL OF EMISSIONS FROM RECREATIONAL ENGINES AND VEHICLES
PK-PSQCA
- PS 627-1977 SPECIFICATION FOR PERFORMANCE OF CONSTANT SPEED INTERNAL COMBUSTION ENGINES FOR GENERAL PURPOSES
International Telecommunication Union (ITU)
- ITU-R BT.1722-2-2011 Harmonization of the instruction set for the execution engine for interactive TV applications
- ITU-R BT.1722-2011 Harmonization of the instruction set for the execution engine for interactive TV applications
JP-JEITA
- JEITA IT 4005-2008 The Guidelines for Performance Evaluation of Speech Recognition Engine
BE-NBN
- NBN 635-1964 Compression ignition internal combustion engine. Test introduction
RO-ASRO
- STAS 7923-1981 Pneumostatic drives PISTON ENGINES Main parameters
- STAS 7922-1981 Pneumostatic drives BLADE ENGINES Main parameters
Aerospace Industries Association/ANSI Aerospace Standards
- AIA/NAS NAS 1718-1967 Reliability Demonstration of Solid Propellant Rocket Motors
GOSTR
- GOST ISO 9249-2017 Earth-moving machinery. Engine test code. Net power