Sign In |Help & Support
HOMECHINA STANDARDSICS CLASSIFICATIONINDUSTRY CLASSIFICATIONCHINESE CLASSIFICATIONCART(0)
ALL SECTORS
  • ALL SECTORS
  • GB(National Standard)
  • CB(Shipping)
  • CECS(Engineering Construction)
  • CJ(Urban Construction)
  • CY(News and Publication)
  • DB(Provincial Standard)
  • DL(Electricity & Power)
  • DZ(Geology & Mineralogy)
  • FZ(Spinning & Textile)
  • GA(Public Security)
  • HB(Aviation)
  • HG(Chemical Industry)
  • HJ(Environmental Protection)
  • JB(Machinery)
  • JC(Building Materials)
  • JG(Building & Construction)
  • JJ(Metering)
  • JT(Highway & Transportation)
  • LY(Forestry)
  • MT(Coal)
  • NB(Energy)
  • NY(Agriculture)
  • QB(Light Industry)
  • QC(Automobile & Vehicle)
  • QJ(Aerospace)
  • SH(Petrochemical)
  • SJ(Electronics)
  • SL(Water Resources)
  • SN(Commodity Inspection)
  • SY(Oil & Gas)
  • TB(Railway & Train)
  • YB(Ferrous Metallurgy)
  • YC(Tobacco)
  • YD(Telecommunication)
  • YY(Medical Device)
Database: 365,228(8 Aug 2026)
  1. HOME
  2. Standards for rcs. changes with frequency

rcs. changes with frequency

rcs. changes with frequency, Total:179 items.

The international standard classification for "rcs. changes with frequency" includes: Electromagnetic compatibility(EMC) , Lighting signalling and warning devices , Rubber , Connecting devices , Power stations in general .

The Chinese standard classification for "rcs. changes with frequency" includes: Diesel locomotives , Electromagnetic compatibility , Lighting and signaling equipment , Rubber products in general , Electrician alloy parts , Technical management , Electric power testing technique .

Professional Standard - Railway

  • TB/T 2527-1995 Test Method for Diesel Locomotive Power Changing Along with Atmosphere Condition

Taiwan Provincial Standard of the People's Republic of China

  • CNS 8664-1982 Graphic Symbols for Frequencies, Bands, Modulation and Frequency Diagrams
  • CNS 7629-1981 Method of Test for Change of Resistance with Temperature of Metallic Materials for Electrical Heating

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

  • GB/T 17626.28-2006 Electromagnetic compatibility (EMC) - Testing and measurement techniques - Variation of power frequency immunity test
  • GB/T 33095.1-2016 Rubber，unvulcanized-Measurement of rheological properties using rotorless shear rheometer-Part 1:Frequency sweep
  • GB/T 17348-1998 Motor vehicle--Measurement of variations in dipped beam headlamp angle as a tunction of load

Group Standards of the People's Republic of China

Military Standard of the People's Republic of China-General Armament Department

Professional Standard - Machinery

  • JB/T 7900-2002 Standard test method for change of resistance with temperature of high resistance alloys for electrical heating
  • JB/T 6239.2-1992 General test method for industrial automation instruments Influence of power supply voltage frequency change

Professional Standard - Electron

Professional Standard - Energy and Power Planning

  • DL/T 911-2004 Frequency Response Analysis on Winding Deformation of Power Transformers
  • DL/T 911-2016 Frequency Response Analysis on Winding Deformation of Power Transformation

Society of Automotive Engineers (SAE)

German Institute for Standardization

  • DIN 5483-3:1994-09 Time-dependent quantities - Part 3: Complex representation of sinusoidal time-dependent quantities
  • DIN 5483-2:1982-09 Time-dependent quantities; letter symbols
  • DIN 5483-1:1983 Time-dependent quantities; terms for the time-dependency
  • DIN 5483-1:1983-06 Time-dependent quantities; terms for the time-dependency
  • DIN 55350-21:1982-05 Quality assurance and statistical terminology; statistical terminology; random variables and probability distributions
  • DIN 19539:2016 Investigation of solids - Temperature-dependent differentiation of total carbon (TOC400, ROC, TIC900)
  • DIN /TR 91143-2:2022 Rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English
  • DIN EN 17505:2024-04 Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900); German version EN 17505:2023
  • DIN EN 17505:2022-08 Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900); German and English version prEN 17505:2022 / Note: Date of issue 2022-07-08*Intended as replacement for DIN 19539 (2016-12).
  • DIN 15575:1985-02 Pilot frequency recording; pilot frequency, running speed, track positions, magnetization
  • DIN 55350-21:1982 Quality assurance and statistical terminology; statistical terminology; random variables and probability distributions
  • DIN EN 17505 E:2020-05 Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900)
  • DIN SPEC 91143-2:2012 Modern rheological test methods - Part 2: Thixotropy - Determination of the time-dependent structural change - Fundamentals and interlaboratory test; Text in German and English

Military Standards (MIL-STD)

Engineering Sciences Data Unit (ESDU)

  • ESDU 74011 A-1997 Rate of change of lift coefficient with control deflection for full-span plain controls.
  • AERO C.04.01.01 B-1989 Rate of change of hinge-moment coefficient with incidence for a plain control in incompressible two-dimensional flow@ (b sub 1) sub zero.
  • AERO C.01.01.03 B-1978 Rate of change of lift coefficient with control deflection in incompressible two-dimensional flow@ (a sub 2) sub zero.
  • ESDU 86024 E-2011 Estimation of rms strain in laminated face plates of simply-supported sandwich panels subjected to random acoustic loading. Including a simplified natural frequency prediction method
  • ESDU 86024 E-1991 Estimation of rms strain in laminated face plates of simply-supported sandwich panels subjected to random acoustic loading. Including a simplified natural frequency prediction method.
  • ESDU 84030 C-1993 Longitudinal turbulence intensities over terrain with roughness changes.
  • AERO C.08.01.01 A-1981 Rate of change of pitching moment coefficient with control deflection for a plain control in incompressible two-dimensional flow@ m sub zero.
  • AERO C.04.01.02 B-1989 Rate of change of hinge-moment coefficient with control deflection for a plain control in incompressible two-dimensional flow@ (b sub 2) sub zero.
  • ESDU 89023-1989 Temperatures in plates subjected to a recovery temperature varying linearly with time.

Defense Logistics Agency

GCC Standardization Organization

  • GSO ISO 9987:2014 Motorcycles -- Measurement of variation of dipped beam inclination as a function of load
  • GSO ISO 7029:2013 Acoustics – Statistical Distribution of Hearing Thresholds as a Function of age

The Directorate General of Specifications and Metrology (DGSM)

  • OS GSO ISO 9987:2014 Motorcycles -- Measurement of variation of dipped beam inclination as a function of load
  • OS GSO ISO 7029:2013 Acoustics – Statistical Distribution of Hearing Thresholds as a Function of age

Gosstandart of Russia

  • GOST 16313-1997 Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. General specifications
  • GOST 16312-1997 Electric motor frequency convertors with rated power up to 200 kW and frequency to 20000 Hz. Test methods
  • GOST 21342.17-1978 Resistors. Test method for resistance change depending upon voltage
  • GOST 18068-1972 Laminated glued wood. Method of determining linear dimension changes in accordance with relative humidity

International Telecommunication Union (ITU)

Argentine Institute of Standardization

  • IRAM 6617-1962 Petroleum product viscosity changes with temperature chart

Fondo para la Normalización y Certificación de la Calidad Venezuela, République bolivarienne du

  • COVENIN 729-1974 Medium frequency transformers and radio frequency transformers

National Standardisation Body (ASRO)

  • STAS 12319-1985 MOTOR VEHICLES Measurement of variation of passing beam inclination as a function of load
  • STAS 9594-1974 PLASTICS Determination of stiffness in torsion as a function of temperature
  • SR ISO 4182:1996 Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load

American National Standards Institute （ANSI)

  • ANSI/UL 458-2013 Power Converters/Inverters and Power Converter/Inverter Systems for Land Vehicles and Marine Crafts
  • ANSI/ASTM B70:1990 Test Method for Change of Resistance With Temperature of Metallic Materials for Electrical Heating

Yugoslav Association for Standardization

Polski Komitet Normalizacyjny (PKN)

  • PN C89076-1974 Plastics Determination of torsional shear modulus depending on temperature

National Association of Corrosion Engineers (NACE)

  • NACE Paper 01265-2012 Corrosion rate of carbon steel and austenitic stainless steel in concentrated sulfuric acid versus time

American Water Works Association (AWWA)

  • AWWA JAW60863 Journal AWWA — Modeling Membrane Performance over Time
  • AWWA ACE92113 Fourier Methods to Quantify Random Versus Seasonal Variations of Disinfection By-Products in River-Water Supplies
  • AWWA JAW6243 Journal AWWA — Changes in Strength of Pressurized PVC Pipe With Time

British Standards Institution (BSI)

  • BS DD CLC/TS 50535:2010 Railway applications - Onboard auxiliary power converter systems
  • PD ISO/TR 20659-2:2024 Rheological test methods. Fundamentals and interlaboratory comparisons. Determination of the time-dependent structural change (thixotropy)
  • BS PD ISO/TR 20659-2:2024 Rheological test methods. Fundamentals and interlaboratory comparisons-Determination of the time-dependent structural change (thixotropy)
  • BS EN 60076-18:2012 Power transformers. Measurement of frequency response
  • BS EN 17505:2023 Soil and waste characterization. Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900)
  • BS PD IEC TR 63401-3:2023 Dynamic characteristics of inverter-based resources in bulk power systems-Fast frequency response and frequency ride-through from inverter-based resources during severe frequency disturbances
  • BS PD CEN ISO/TR 20659-2:2024 Rheological test methods. Fundamentals and interlaboratory comparisons - Determination of the time-dependent structural change (thixotropy) - Incorporating corrigendum October 2024
  • BS PD CEN ISO/TR 15235:2024 Rheological test methods. Fundamentals and interlaboratory comparisons - Determination of the time-dependent structural change (thixotropy) - Incorporating corrigendum October 2024

Association Francaise de Normalisation

  • NF B51-141:1993 Fibreboards. Determination of dimensional changes associated with changes in relative humidity.
  • NF T51-561:2011 Plastics - Determination of density as a function of temperature - Immersion method
  • NF EN ISO 105-J05:2007 Textiles - Color fastness tests - Part J05: method of instrumental evaluation of the variation in shade of a sample depending on the illuminant (CMCCON02)

International Organization for Standardization (ISO)

  • ISO 4182:1999 Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load
  • ISO 9987:1990 Motorcycles; measurement of variation of dipped beam inclination as a function of load
  • ISO 16985:2003 Wood-based panels - Determination of dimensional changes associated with changes in relative humidity
  • ISO 8318:1986 Packaging; Complete, filled transport packages; Vibration tests using a sinusoidal variable frequency
  • ISO 4182:1986 Motor vehicles; Measurement of variations in dipped-beam headlamp angle as a function of load
  • ISO/CD 17505:2023 Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900)
  • ISO/DTR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
  • ISO/CD TR 20659-2:2023 Rheological test methods — Fundamentals and interlaboratory comparisons — Part 2: Determination of the time-dependent structural change (thixotropy).
  • ISO 4182:1979 Road vehicles — Motor vehicles — Measurement of variation of passing beam inclination as a function of load

United States Navy

Korean Agency for Technology and Standards (KATS)

  • KS F ISO 16985:2013 Wood-based panels－Determination of dimensional changes associated with changes in relative humidity
  • KS F ISO 16985:2006 Wood-based panels-Determination of dimensional changes associated with changes in relative humidity
  • KS R ISO 4182:2004 Road vehicles-Measurement of variations in dipped-beamheadlamp angle as a function of load
  • KS R ISO 4182-2004(2009) Road vehicles－Measurement of variations in dipped-beamheadlamp angle as a function of load
  • KS R ISO 4182:2013 Road vehicles－Measurement of variations in dipped-beamheadlamp angle as a function of load
  • KS C IEC 60989:2005 Separating transformers, autotransformers, variable transformers and reactors
  • KS C 4290-2007(2017) A.C. inverter for low voltage adjustable frequency
  • KS C IEC 61000-4-28:2010 Electromagnetic compatibility(EMC) － Part 4-28: Testing and measurement techniques － Variation of power frequency, immunity test for equipment with input current not exceeding 16 A per phase

Danish Standards Foundation

  • DS/EN ISO 7029:2000 Acoustics - Statistical distribution of hearing thresholds as a function of age
  • DANSK DS/ISO/TR 20659-2:2024 Rheological test methods – Fundamentals and interlaboratory comparisons – Part 2: Determination of the time-dependent structural change (thixotropy)
  • DS/ISO 8318:1987 Packaging. Complete, filled transport packages. Vibration tests using a sinusoidal variable frequency
  • DS/ISO 17718:2013 Wholemeal and flour from wheat (Triticum aestivum L.) - Determination of rheological behaviour as a function of mixing and temperature increase

Standard Association of Australia （SAA）

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

  • ASHRAE SF-98-26-2-1998 Modeling the Variation of Wind Speed with Height for Agricultural Source Pollution Control
  • ASHRAE CH-06-7-4-2006 Case Study of Demand Shifting with Thermal Mass in Two Large Commercial Buildings

International Electrotechnical Commission (IEC)

  • IEC 60989:1991 Separating transformers, autotransformers, variable transformers and reactors
  • IEC PAS 62187:2000 Variable frequency vibration test method
  • IEC 61000-4-28:2001 Electromagnetic compatibility (EMC) - Part 4-28: Testing and measurement techniques - Variation of power frequency, immunity test

Swedish Institute for Standards

  • SS-ISO 4182:1988 Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load
  • SIS SS-ISO 4182:1988 Motor vehicles - Measurement of vari- ations in dipped-beam headlamp angle as a function of load
  • SS-ISO 4182:2005 Motor vehicles - Measurement of variations in dipped-beam headlamp angle as a function of load (ISO 4182:1999, IDT)

Ente Nazionale Italiano di Unificazione

  • UNI EN 14406:2005 Products and systems for the protection and repair of concrete structures - Test methods - Determination of the expansion ratio and expansion evolution

Indonesia Standards

  • SNI 04-2383-1991 SCPC modem with frequency modulation for Domestic Satelitte Communication System

European Committee for Standardization (CEN)

  • EN 17505:2023 Soil and waste characterization - Temperature dependent differentiation of total carbon (TOC400, ROC, TIC900)

American Society for Testing and Materials (ASTM)

  • ASTM D7406-07(2012) Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products
  • ASTM D7406-07 Standard Test Method for Time-Dependent (Creep) Deformation Under Constant Pressure for Geosynthetic Drainage Products

Institute of Electrical and Electronics Engineers (IEEE)

  • IEEE 1139-2008 Definitions of Physical Quantities for Fundamental Frequency and Time Metrology-Random Instabilities
  • IEEE 1139-1999 Definitions of physical quantities for fundamental frequency and time metrology - Random instabilities
  • IEEE P1139/D18, May 2022 IEEE Draft Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities
  • IEEE P1139/D17, November 2022 IEEE Draft Standard Definitions of Physical Quantities for Fundamental Frequency and Time Metrology--Random Instabilities

Standards Norway

  • NS-EN ISO 7029:2000 Acoustics - Statistical distribution of hearing thresholds as a function of age (ISO 7029:2000)

Spanish Association for Standardization (UNE)

  • UNE-EN ISO 7029:2000 ACOUSTICS. STATISTICAL DISTRIBUTION OF HEARING THRESHOLDS AS A FUNCTION OF AGE. (ISO 7029:2000)

Canadian Standards Association (CSA)

  • CSA W231-2025 Developing and interpreting intensity-duration-frequency (IDF) information under a changing climate

Japanese Industrial Standards Committee (JISC)

  • JIS C 60068-2-57:2002 Environmental testing -- Electrotechnical products -- Time-history vibration test method
  • JIS C 0057:2002 Environmental testing -- Electrotechnical products -- Time-history vibration test method

Lithuanian Standards Office

  • LST EN ISO 7029:2002 Acoustics - Statistical distribution of hearing threshold as a function of age (ISO 7029:2000)

Cooling Technology Institute

  • CTI STD-151-2002 Variable Frequency Drive Application Guidelines for Cooling Towers

All Rights Reserved © 2026 WWW.CHINASTANDARDS.NET visa master american express unionpay apple pay paypal google pay