Integration of DSC peak area heat flow versus temperature

Integration of DSC peak area heat flow versus temperature, Total:118 items.

The international standard classification for "Integration of DSC peak area heat flow versus temperature" includes: Thermoplastic materials .

The Chinese standard classification for "Integration of DSC peak area heat flow versus temperature" includes: Electrotechnical material and universal parts in general .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 3682.2-2018 Plastics-Determination of the melt mass-flow rate(MFR)and melt volume-flow rate (MVR) of thermoplastics-Part 2:Method for materials sensitive to time-temperature history and/or moisture

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 39843-2021 Electronic characteristic measurements—Local critical current density and its distribution in large-area superconducting films

SCC

AS 3778.3.3:1990 Measurement of water flow in open channels, Part 3.3: Velocity-area methods - Measurement by slope-area method
BS 354:1995 Recommendations for photometric integrators
BS EN ISO 748:2000 Measurement of liquid flow in open channels. Velocity-area methods
BS ISO 748:1997 Measurement of liquid flow in open channels. Velocity-area methods
CAN/CGSB-157.2-M91-1991 Liquid Flow Measurement in Open Channels - Velocity-Area Methods
VDI/VDE 2640 BLATT 2-1981 Network measurements in flow cross-sections; determination of water flow in closed, completely filled pipes with circular or rectangular cross-section
BS 3680-3A:1980 Measurement of liquid flow in open channels. Stream flow measurement-Velocity-area methods
DIN SPEC 91342:2017 Characterization of atomized fluids - Determination of the relative volume flux density distribution in sprays; Text in German and English
NS-EN ISO 748:2000 Measurement of liquid flow in open channels — Velocity-area methods (ISO 748:1997)
AS 3778.3.6:1990 Measurement of water flow in open channels, Part 3.6: Velocity-area methods - Measurement of flow in tidal channels
VDI/VDE 2640 BLATT 3-1983 Network measurements in flow cross-sections; determination of gas flow in pipes with circular, circular ring or rectangular cross-section
DANSK DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
DANSK DS/ISO 3966:2020 Measurement of fluid flow in closed conduits – Velocity area method using Pitot static tubes
AS 3778.3.1:1990 Measurement of water flow in open channels, Part 3.1: Velocity-area methods - Measurement by current-meters and floats
BS 1042-2.1:1983 Measurement of fluid flow in closed conduits. Velocity area methods-Method using Pitot static tubes
AENOR UNE-EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
DIN EN ISO 1133-2 E:2010 Draft Document - Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO/DIS 1133-2:2010); German version prEN...
NS-EN ISO 1133-2:2011 Plastics — Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics — Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
BS ISO/TR 13989-2:2000 Calculation of scuffing load capacity of cylindrical, bevel and hypoid gears-Integral temperature method
09/30183439 DC BS EN ISO 1133-2. Plastics. Determination of the melt volume-flow rate (MVR) and melt mass-flow rate (MFR) of thermoplastics materials. Part 2. Method for materials sensitive to time-temperature history and/or moisture
BS EN ISO 10211-2:2001 Thermal bridges in building construction. Heat flows and surface temperatures-Linear thermal bridges
DANSK DS/ISO 748:2021 Hydrometry – Measurement of liquid flow in open channels – Velocity area methods using point velocity measurements
DANSK DS/EN ISO 15927-6:2007 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days)

AGMA - American Gear Manufacturers Association

P149.03-1983 Prediction of the Peak Temperature on the Surface of Thermoplastic Gear Teeth

Korean Agency for Technology and Standards (KATS)

KS F 2010-2023 Method of measurements for flow discharge in open channels ? Velocity-area methods
KS B ISO TR 7178:2003 Liquid flow measurement in open channels-Velocity-area methods-Investigation of total error
KS B ISO TR 7178:2015 Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error
KS B ISO 4365:2022 Liquid flow in open channels — Sediment in streams and canals — Determination of concentration, particle size distribution and relative density
KS M 1133-2-2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS M ISO 1133-2:2016 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS B ISO TR 7178-2003(2013) Liquid flow measurement in open channels－Velocity－area methods－Investigation of total error
KS M ISO 1133-2-2021 Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture
KS B ISO TR 9823:2003 Liquid flow measurement in open channels-Velocity-area method using a restricted number of verticals
KS B ISO TR 9823:2015 Liquid flow measurement in open channels－Velocity－area method using a restricted number of verticals
KS C IEC 61074:2002 Determination of heats and temperatures of melting and crystallization of electrical insulating materials by differential scanning calorimetry
KS K ISO 7211-6:2019 Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric
KS M ISO 1133-2-2016(2021) Plastics － Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics － Part 2: Method for materials sensitive to time-temperature history and/or moisture

Standard Association of Australia （SAA）

AS 3778.3.3:2022 Measurement of water flow in open channels, Part 3.3: Velocity-area methods — Measurement by slope-area method (ISO 1070:2018, IDT)
AS 4250.4:1995 Liquid hydrocarbons - Dynamic measurement - Proving systems for volumetric meters - Temperature corrections in volumetric calibration by water transfer method
AS 3778.3.5:1990 Measurement of water flow in open channels - Velocity-area methods - Investigation of total error
AS 3778.3.6:2022 Measurement of water flow in open channels, Part 3.6: Velocity-area methods — Measurement of flow under tidal conditions (ISO 2425:2010, IDT)
AS 3778.3.8:2001 Measurement of water flow in open channels Part 3.8: Velocity-area method--Electromagnetic method using a full-channel-width coil
AS 3778.3.7:2022 Measurement of water flow in open channels, Part 3.7: Velocity-area methods — Measurement by ultrasonic method (ISO 6416:2017, IDT)

American Society for Testing and Materials (ASTM)

ASTM D7214-07a Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-06 Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D7214-07a(2012) Standard Test Method for Determination of the Oxidation of Used Lubricants by FT-IR Using Peak Area Increase Calculation
ASTM D4311/D4311M-21 Standard Practice for Determining Asphalt Volume Correction to a Base Temperature
ASTM D3858-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D7097-09 Standard Test Method for Determination of Moderately High Temperature Piston Deposits by Thermo-Oxidation Engine Oil Simulation Test-TEOST MHT

Association Francaise de Normalisation

NF X10-331:1992 Liquid flow measurement in open channels. Slope-area method.
NF X11-601:1979 Sieving and granulometry. Determination of the area per unit of mass or volume of powders by permeametry. Lea and nurse method.
NF EN ISO 10545-3:2018 Ceramic tiles and slabs - Part 3: determination of water absorption, open porosity, apparent relative density and overall density
NF EN ISO 1133-2:2012 Plastics - Determination of the melt flow index of thermoplastics, by mass (MFR) and by volume (MVR) - Part 2: method for materials sensitive to time-temperature history and/or humidity
NF X10-112*NF ISO 3966:2021 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
NF EN ISO 11357-3:2018 Plastics - Differential calorimetric analysis (DSC) - Part 3: determination of the temperature and enthalpy of fusion and crystallization
NF X10-114:1993 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or pitot static tubes.
NF T51-038-2*NF EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2 : method for materials sensitive to time-temperature history and/or moisture
NF EN 4069:1996 Série aérospatiale - Écrous hexagonaux ordinaires, hauteur réduite, surplats réduits, en acier résistant à chaud, passives - Classification : 600 MPa (à température ambiante) /650 degrés Celsius.
NF EN ISO 11357-6:2018 Plastics - Differential scanning calorimetry (DSC) - Part 6: determination of the oxidation induction time (isothermal OIT) and the oxidation induction temperature (dynamic OIT)
NF X10-112:1977 Measurement of fluid flow in closed conduites.velocity area method using pitot static tubes.

YU-JUS

JUS U.A9.201-1988 Spatial needs of disabled people in buildings and environment. Flat-surface irculation areas. Access and passing spaces
JUS U.A9.203-1988 Spatial needs of disabled people ±n bu?ldings and environment. Flat-surface irculation areas. Slope and beight of curbstone

VDI - Verein Deutscher Ingenieure

VDI/VDE 2640 Blatt 2-1979 Netzmessungen in Stroemungsquerschnitten; Bestimmung des Wasserstromes in geschlossenen@ ganz gefuellten Leitungen mit Kreis- oder Rechteckquerschnitt

GSO

GSO ISO 18852:2014 Rubber compounding ingredients -- Determination of multipoint nitrogen surface area (NSA) and statistical thickness surface area (STSA)
OS GSO ISO 4365:2013 Liquid flow in open channels -- Sediment in streams and canals -- Determination of concentration, particle size distribution and relative density
GSO ISO 4365:2013 Liquid flow in open channels -- Sediment in streams and canals -- Determination of concentration, particle size distribution and relative density
BH GSO ISO 1133-2:2017 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2: Method for materials sensitive to time-temperature history and/or moisture
GSO ISO 1133-2:2015 Plastics -- Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics -- Part 2: Method for materials sensitive to time-temperature history and/or moisture
GSO ISO 3966:2022 Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
BH GSO ISO 3966:2023 Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
GSO ISO 748:2024 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements
GSO ISO 15927-6:2015 Hygrothermal performance of buildings -- Calculation and presentation of climatic data -- Part 6: Accumulated temperature differences (degree-days)
OS GSO ISO 10211:2013 Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculations
BH GSO ISO 10211:2016 Thermal bridges in building construction -- Heat flows and surface temperatures -- Detailed calculations

British Standards Institution (BSI)

BS ISO 19935-3:2021 Plastics. Temperature modulated DSC. Separation of overlapping thermal transitions
BS ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes
BS 1042-2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS EN ISO 1133-2:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Method for materials sensitive to time-temperature history and/or moisture
BS ISO 3966:2020 Measurement of fluid flow in closed conduits. Velocity area method using Pitot static tubes
BS EN 16795:2015 Plastics. Method for estimating heat build up of flat surfaces by simulated solar radiation
BS ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes

International Organization for Standardization (ISO)

ISO/TR 7178:1983 Liquid flow measurement in open channels; Velocity-area methods; Investigation of total error
ISO 1070:2018 Hydrometry — Slope-area method
ISO 3966:1977 Measurement of fluid flow in closed conduits; Velocity area method using Pitot static tubes
ISO 7194:1983 Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO/TR 9823:1990 Liquid flow measurement in open channels; velocity-area method using a restricted number of verticals
ISO 19935-3:2021 Plastics - Temperature modulated DSC - Part 3: Separation of overlapping thermal transitions
ISO 3966:2020 Measurement of fluid flow in closed conduits — Velocity area method using Pitot static tubes
ISO 1133-2:2011 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
ISO 3966:2008 Measurement of fluid flow in closed conduits - Velocity area method using Pitot static tubes
ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO 748:2021 Hydrometry — Measurement of liquid flow in open channels — Velocity area methods using point velocity measurements

HU-MSZT

MSZ 11383/3-1987 Thermistor detection method to positive thermistor temperature coefficient

IN-BIS

IS 2912-1964 Recommendations for open channel liquid flow measurement using the slope area method (approximation method)
IS 2915-1964 Data Collection Instructions for Determining Error in Velocity Area Method Flow Measurements

KR-KS

KS B ISO 4365-2022 Liquid flow in open channels — Sediment in streams and canals — Determination of concentration, particle size distribution and relative density
KS K ISO 7211-6-2019 Textiles — Woven fabrics — Construction — Methods of analysis — Part 6: Determination of the mass of warp and weft per unit area of fabric

Danish Standards Foundation

DS/EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture
DS/EN ISO 15927-6:2007 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4418-2001 Prediction of Skin and Clothing Temperatures Under Thermal Transient Considering Moisture Accumulation in Clothing
ASHRAE 4357-2000 Modeling Partial Charging and Discharging of Area-Constrained Ice Storage Tanks (The Full Text of This Paper Can Be Found in the International Journal of Heating@ Ventilating@ Air-Conditioning and Refrigerating Research@ Volume 5@ Number 3@ July 1999@ pp.

Indonesia Standards

SNI 3414-2008 Based on water flow combined with depth. Procedure for sampling river floating sediments

FI-SFS

SFS 3315-1978 Measuring system for building area, partial module 0,5M
SFS 3317-1978 System of measurement of building area, dimensions of welded parts

German Institute for Standardization

DIN EN ISO 1133-2:2012-03 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011); German version EN ISO 1133-2:2011
DIN EN ISO 10211:2018-03 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017); German version EN ISO 10211:2017
DIN EN ISO 15927-6:2007-11 Hygrothermal performance of buildings - Calculation and presentation of climatic data - Part 6: Accumulated temperature differences (degree-days) (ISO 15927-6:2007); German version EN ISO 15927-6:2007

Lithuanian Standards Office

LST EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)

ES-UNE

UNE-EN ISO 1133-2:2012 Plastics - Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics - Part 2: Method for materials sensitive to time-temperature history and/or moisture (ISO 1133-2:2011)
UNE-EN ISO 10211:2022 Thermal bridges in building construction - Heat flows and surface temperatures - Detailed calculations (ISO 10211:2017)

ESDU - Engineering Sciences Data Unit

ESDU 86035 E-2011 Integral length scales of turbulence over flat terrain with roughness changes

TR-TSE

TS 3417-1979 MEASUREMENT OP FLUID PLOW IN CLOSED CONDUITS - VELOCITY AREA METHOD USING PITOT STATIC TUBES

Others: