Cylinder body appearance characteristics

Cylinder body appearance characteristics, Total:135 items.

The international standard classification for "Cylinder body appearance characteristics" includes: Diagnostic, maintenance and test equipment , Cylinders , Internal combustion engines .

The Chinese standard classification for "Cylinder body appearance characteristics" includes: Highway vehicle servicing installation , Hydraulic and pneumatic device , Engine body and moving parts .

Professional Standard - Traffic

JT/T 123-1993 Cylinder Bushing Boring Machine
JT/T 123-2007 Cylinder bushing boring machine
JT/T 104-1991 Technical requirements for automobile engine cylinder blocks and cylinder heads being overhauled

Taiwan Provincial Standard of the People's Republic of China

CNS 5270-3-1980 Graphical Symbols for Fluid Power Diagrams-Cylinder
CNS 5270.3-1980 Graphical Symbols for Fluid Power Diagrams-Cylinder

Professional Standard - Machinery

JB/T 7377-2007 Single rod cylinders with integral mountings bores from 32mm to 250mm-Mounting dimensions
JB/T 7377-1994 The installation size of integral single-rod cylinder with cylinder inner diameter of 32~250mm
JB/T 9753.3-2011 Internal combustion engines — Cylinder heads and cylinder blocks —Part 3: Cray iron cylinder head and cylinder block castings — Specifications
JB/T 9753.2-2008 Internal combustion engines—Cylinder heads and cylinder blocks—Part2:Cast iron cylinder heads—Specification

Group Standards of the People's Republic of China

T/CAMS /CICEIA72-2021 Two-stroke general utility gasoline engines —Aluminum cylinder block without liner

Professional Standard - Aviation

HBm 65.22-1988 Mini-car - Cylinder Body of Gasoline Engine

工业和信息化部

JBT9753.2-2019 Internal combustion engine cylinder heads and blocks Part 2: Technical conditions for cast iron cylinder heads
JB/T 9753.2-2019 Internal combustion engines—Cylinder heads and cylinder blocks—Part2:Cast iron cylinder heads—Specification

工业和信息化部/国家能源局

JB/T 13203-2017 Fatigue test methods for diesel cylinder block

CZ-CSN

CSN 07 8625-1987 Closing valves with a square cylinders for toxic gases. Dimensions
CSN 34 8117-1982 Ceramic insulators. Long rod insulators with external fittings. Elementary dimensions and characteristics
CSN 34 8118-1982 Ceramic insulators. Long rod insulators with external fittings. Elementary dimensions and characteristics
CSN ISO 8158:1994 Evaluation of the performance characteristics of gas analysers
CSN 07 8610-1969 Small valve for cylindera for ?he storage of oxygen, nitrogen, inflammable and rare gases

GSO

BH GSO ISO 10766:2016 Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
BH GSO ISO 7285:2016 Pneumatic cylinders for mechanized multiple spot welding
GSO ISO 7285:2015 Pneumatic cylinders for mechanized multiple spot welding
BH GSO ISO 21287:2017 Pneumatic fluid power -- Cylinders -- Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
OS GSO ISO 21287:2016 Pneumatic fluid power -- Cylinders -- Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
GSO ISO 21287:2016 Pneumatic fluid power -- Cylinders -- Compact cylinders, 1000 kPa (10 bar) series, bores from 20 mm to 100 mm
GSO ISO 10766:2015 Hydraulic fluid power -- Cylinders -- Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
GSO ISO 6547:2015 Hydraulic fluid power -- Cylinders -- Piston seal housings incorporating bearing rings -- Dimensions and tolerances

IT-UNI

UNI EN ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding
UNI 7824-1978 Integral cylinder combustion chamber with liquid fuel injection

Korean Agency for Technology and Standards (KATS)

KS C ISO 7285:2010 Pneumatic cylinders for mechanized multiple spot welding
KS B ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding
KS C ISO 7285-2001(2006) Pneumatic cylinders for mechanized multiple spot welding
KS C ISO 7285-2010 Pneumatic cylinders for mechanized multiple spot welding
KS B ISO 10766-2013 Hydraulic fluid power－Cylinders－Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
KS B ISO 8140-2013 Pneumatic fluid power－Cylinders, 1 000 kPa(10 bar) series－Rod end clevis－Mounting dimensions
KS M 2020-2000 Testing method for oxidation characteristics of cylinder oils
KS M 2020-2005(2020) Testing method for oxidation characteristics of cylinder oils
KS M 2020-1985 Testing method for oxidation characteristics of cylinder oils
KS B ISO 8140:2005 Pneumatic fluid power-Cylinders, 1 000 kPa(10 bar) series-Rod end clevis-Mounting dimensions
KS M 2020-2020 Testing method for oxidation characteristics of cylinder oils
KS B ISO 8140:2013 Pneumatic fluid power－Cylinders, 1 000 kPa(10 bar) series－Rod end clevis－Mounting dimensions

British Standards Institution (BSI)

BS ISO 2344:1999 Road vehicles. M14 x 1,25 spark plugs with conical seating and their cylinder head housings
BS AU 262-1:1995 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M14 x 1, 25 glow-plugs
BS AU 262-2:1995 Road vehicles - Sheath-type glow-plugs with conical seating and their cylinder head housing - M12 x 1.25 glow-plugs
BS ISO 8140:1995 Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Rod end clevis - Mounting dimensions
BS ISO 28741:2023 Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
22/30400036 DC BS ISO 28741. Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
BS ISO 17447-1:2022 Road Vehicles. Glow plugs with conical seating and their cylinder head housing. Basic characteristics and dimensions for metal-sheath-type glow plugs
BS ISO 22977:2005 Road vehicles — M12 × 1,25 spark - plugs with flat seating and 14 mm bi - hexagon and their cylinder head housing
BS ISO 8470:2006 Road vehicles — M14 × 1,25 spark - plugs with flat seating and 16 mm hexagon and their cylinder head housings
BS ISO 16246:2005 Road vehicles — M12 x 1,25 spark - plugs with flat seating and 14 mm hexagon and their cylinder head housing

SCC

BS 1566:1949 Copper indirect cylinders annular type
BS ISO 6982:1992 Hydraulic fluid power. Cylinders. Rod end spherical eyes. Mounting dimensions
DANSK DS/ISO 7285:2020 Pneumatic cylinders for mechanized multiple spot welding
BS ISO 28741:2009 Road vehicles. Spark-plugs and their cylinder head housings. Basic characteristics and dimensions
MIL MIL-DTL-2/7C-1995 VALVE, CYLINDER, GAS: ANHYDROUS AMMONIA (DISHED-HEAD CYLINDER) OUTLET 240, INLET .75 INCH (SUPERSEDING MIL-V-2/7B) (S/S BY MIL-DTL-2/7D)
MIL MIL-DTL-2/9C-1995 VALVE, CYLINDER, GAS: ANHYDROUS AMMONIA (DISHED-HEAD CYLINDER) OUTLET 240, INLET 1 INCH (SUPERSEDING MIL-V-2/9B) (S/S BY MIL-DTL-2/9D)
UNE 26453:1996 ROAD VEHICLES. M18 X 1,5 SPARK-PLUGS WITH CONICAL SEATING AND THEIR CYLINDER HEAD HOUSING
UNE 26459:2003 Road vehicles. M14 x 1,25 spark plugs with conical seating and their cylinder head housing.
BS ISO 8139:1991 Pneumatic fluid power. Cylinders, 1000 kPa (10 bar) series. Rod end spherical eyes. Mounting dimensions
BS ISO 8140:1991 Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Rod end clevis. Mounting dimensions
DANSK DS/EN ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)
NS-EN ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)
UNE 26509:2003 Road vehicles. M14 x 1,25 compact spark plugs with conical seating and their cylinder head housing.
BS ISO 2344:1998 Road vehicles. M14 x 1,25 spark plugs with conical seating and their cylinder head housings
UNE 26510:2003 Road vehicles. M10 x 1 spark plugs with flag seating and their cylinder head housing.
DANSK DS/ISO 28741:2023 Road vehicles – Spark-plugs and their cylinder head housings – Basic characteristics and dimensions
AENOR UNE 26453:1996 Road vehicles. M18 x 1.5 spark plug with conical seat and its housing in the cylinder head.
AENOR UNE 26459:2003 Road vehicles. M14 x 1.25 spark plugs with conical seat and their housings in the cylinder head.
MIL MIL-DTL-83513/17D-2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board
08/30184322 DC BS ISO 8140. Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod end clevis
MIL MIL-DTL-83513/29B-2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board
MIL MIL-DTL-83513/30B-2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board
BS 5755:1986 Specification for dimensions of basic features of fluid power cylinders
MIL MIL-DTL-83513/18D-2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board
MIL MIL-DTL-83513/16D-2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Right Angle, Pin Contacts, 2 Row, Solder Type, Standard Profile, 9 Through 37 Contacts, Printed Circuit Board
MIL MIL-DTL-83513/20D-2009 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board
BS ISO 10766:1996 Hydraulic fluid power. Cylinders. Housing dimensions for rectangular-section-cut bearing rings for pistons and rods
MIL MIL-DTL-83513/33B-2008 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board
MIL MIL-DTL-83513/21D-2009 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Right Angle, Socket Contacts, 4 Row, Solder Type, Standard Profile, 100 Contacts, Printed Circuit Board
MIL MIL-DTL-83513/28B-2009 Connectors, Electrical, Rectangular, Plug, Microminiature, Polarized Shell, Straight, Pin Contacts, 2 Row, Solder Type, Standard Profile, 9 Through 37 Contacts, Printed Circuit Board
MIL MIL-DTL-83513/32B-2009 Connectors, Electrical, Rectangular, Receptacle, Microminiature, Polarized Shell, Straight, Socket Contacts, 3 Row, Solder Type, Standard Profile, 51 Contacts, Printed Circuit Board
MIL MIL-DTL-2/7D-2002 VALVE, CYLINDER, GAS: ANHYDROUS AMMONIA (DISHED-HEAD CYLINDER), OUTLET 240, INLET 0.75 INCH (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F(21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/7C)
BS 3526-2:1964 Specification for wet type cylinder liners fo I.C.engines. Toroidal sealing rings
BS 6656:1991 Guide to prevention of inadvertent ignition of flammable atmospheres by radio-frequency radiation
MIL MIL-DTL-2/9D-2002 VALVE, CYLINDER, GAS: ANHYDROUS AMMONIA (DISHED-HEAD CYLINDER), OUTLET 240, INLET 1.00 INCH (PRESSURES THROUGH 500 PSIG (3450 KPA) AT 70 DEG. F(21.1 DEG. C)) (SUPERSEDING MIL-DTL-2/9C)
AENOR UNE 26509:2003 Road vehicles. Compact M14 x 1.25 spark plugs with conical seat and its housing in the cylinder head.
BS ISO 10100:2001 Hydraulic fluid power. Cylinders. Acceptance tests
08/30184317 DC BS ISO 8139. Pneumatic fluid power. Cylinders, 1 000 kPa (10 bar) series. Mounting dimensions of rod end spherical eyes

BR-ABNT

ABNT EB-983-1979 Compressed gas cylinder valve
ABNT NB-46-1959 Paint for compressed gas cylinders
ABNT PB-588-1978 Compressed gas cylinder valve interface and flange
ABNT EB-160-1970 Carbon steel seamless storage cylinder for high pressure gas

KR-KS

KS B ISO 7285-2021 Pneumatic cylinders for mechanized multiple spot welding

ES-UNE

UNE-EN ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)

German Institute for Standardization

DIN EN ISO 7285:2021-04 Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995); German version EN ISO 7285:2021
DIN ISO 8140:2008 Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Rod end clevis - Mounting dimensions (ISO 8140:1991); English version of DIN ISO 8140-2008-01
DIN ISO 8140:2011-01 Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises (ISO 8140:2009)

Lithuanian Standards Office

LST EN ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)

Danish Standards Foundation

DS/EN ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)

Association Francaise de Normalisation

NF EN ISO 7285:2021 Vérins pneumatiques pour soudage multipoints mécanisés
NF E49-036*NF ISO 8140:2018 Pneumatic fluid power - Cylinders, 1 000 kPa (10 bar) series - Mounting dimensions of rod-end clevises
NF E49-400:1992 Pneumatic fluid power. 8 bar cylinders. Mounting accessories. Fork yokes and tenons.
NF E48-037:1988 Hydraulic fluid power. Cylinders. Rectangular bearing ring housing for rods and pistons. Dimensions.
NF A36-211:1997 Steel sheet and strip for welded gas cylinders.
NF E48-371:1994 Hydraulic fluid power. Rotary shaft lip type seals. Dimensions and characteristics of housing and shaft.
NF ISO 10766:2014 Hydraulic transmissions - Cylinders - Rectangular section guide device housing dimensions for pistons and piston rods
NF E49-035:1990 Pneumatic fluid power. Cylinders, 10 bar (1000 kpa) series. Rod end spherical eyes. Mounting dimensions.

ZA-SANS

SANS 10297:2006 The reconditioning of external LPG cylinder valves

PL-PKN

PN-EN ISO 7285-2021-07 E Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)
PN M73775-1988 Pneumatic fluid power Rod end spherical eyes of piston rods of cylinders Mountina dimensions

AT-ON

OENORM EN ISO 7285:2021 Pneumatic cylinders for mechanized multiple spot welding (ISO 7285:1995)
ONORM ISO 10099:1992 Pneumatic fluid power - Cylinders - Acceptance test

International Organization for Standardization (ISO)

ISO 28741:2009 Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions
ISO 28741:2023 Road vehicles — Spark-plugs and their cylinder head housings — Basic characteristics and dimensions
ISO 8140:2009 Pneumatic fluid power - Cylinders, 1000 kPa (10 bar) series - Mounting dimensions of rod-end clevises
ISO 17447-1:2022 Road Vehicles — Glow plugs with conical seating and their cylinder head housing — Part 1: Basic characteristics and dimensions for metal-sheath-type glow plugs

PT-IPQ

NP 1973-1986 fish. Tuna, graded based on appearance and water characteristics

DIN

DIN ISO 2345:1997 Road vehicles - M18 x 1.5 spark-plugs with conical seating and their cylinder housing (ISO 2345:1994)

(U.S.) Ford Automotive Standards

FORD WSS-M2A165-A-2014 ALUMINUM CASTING ALLOY, CYLINDER BLOCK, 11% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A***
FORD WSS-M2A165-A2-2013 ALUMINUM CASTING ALLOY, CYLINDER BLOCK, 9.5% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A*** Shown on FORD WSS-M2A165-A
FORD WSS-M2A165-A2-2014 ALUMINUM CASTING ALLOY, CYLINDER BLOCK, 9.5% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A165-A)
FORD WSS-M2A165-A3-2014 ALUMINUM CASTING ALLOY, CYLINDER BLOCK, 8.5% SILICON ***TO BE USED WITH FORD WSS-M99P1111-A*** (Shown on FORD WSS-M2A165-A)

RU-GOST R

GOST 28447.6-1990 Textured yarns. Method for determination of appearance and inter-bobbin defects

International Electrotechnical Commission (IEC)

IEC 60364-7-701:2019 Low-voltage electrical installations - Part 7-701: Requirements for special installations or locations - Locations containing a bath or shower

SE-SIS

SIS SS IEC 273:1982 Insulators — Indoor and outdoor post insulators and post insulator units for systems with nominal voltages greater than 1000 V — Dimensions and characteristics
SIS SMS 2231-1965 Gas cylinders for medical gases. Marking for identification of the contents

American National Standards Institute （ANSI)

ANSI/EIA 417-A:1991 Crystal Outlines

United States Navy

NAVY QPL-29576-QPD-2011 Cylinders, Steel, Compressed Gas, Non-Shatterable, Welded

Defense Logistics Agency

DLA MIL-DTL-83513/33 B (1)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD
DLA MIL-DTL-83513/32 B (1)-2013 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 3 ROW, SOLDER TYPE, STANDARD PROFILE, 51 CONTACTS, PRINTED CIRCUIT BOARD
DLA MIL-DTL-83513/33 B-2008 CONNECTORS, ELECTRICAL, RECTANGULAR, RECEPTACLE, MICROMINIATURE, POLARIZED SHELL, STRAIGHT, SOCKET CONTACTS, 4 ROW, SOLDER TYPE, STANDARD PROFILE, 100 CONTACTS, PRINTED CIRCUIT BOARD

ES-AENOR

UNE 9-009-1985 Characteristics of gas fuel required for boiler projects

Compressed Gas Association (U.S.)

CGA V-9-2009 Compressed gas association standard for compressed gas cylinder valves

BELST

STB 11.13.20-2010 System of fire safety standards. Automatic gas fire extinguishing systems. Cylinders and cylinder banks. General technical requirements. Test methods

Others: