Yaskawa driver re60

Yaskawa driver re60, Total:152 items.

The international standard classification for "Yaskawa driver re60" includes: Bodies and body components .

The Chinese standard classification for "Yaskawa driver re60" includes: Vehicle body (cab) and accessories .

Group Standards of the People's Republic of China

T/ZZB 1865-2020 Electric rearview mirrors driver for automobile
T/QGCML 3002-2024 Secure data memory encryption chip driver system
T/QGCML 1986-2023 MLVD S driver TIA chip

未注明发布机构

SAE J744-201610 Hydraulic Pump and Motor Mounting and Drive Dimensions
CSA C22.2 No.274-2017(R2021) Adjustable speed drives
SAE J744-198310 Hydraulic Pump and Motor Mounting and Drive Dimensions

Professional Standard - Automobile

QC/T 965-2014 Driver of Electric rear-view mirrors for Motor vehicle

Taiwan Provincial Standard of the People's Republic of China

CNS 14276-1998 Safety of electric toys

GOSTR

GOST R 52869-2007 Pneumatic drives. Safety requirements

SAE - SAE International

SAE AS47A-1944 Pump@ Fuel@ Mounting Pad and Drive
SAE ARP218A-2004 MOUNTING PADS AND DRIVES - MOTOR OPERATED THRU SPLINE-PINION
SAE AS45A-2004 GENERATOR@ MOUNTING PAD AND DRIVE
SAE AS43-2004 GOVERNOR@ PROPELLER@ MOUNTING PAD & DRIVE
SAE AS55B-2013 TACHOMETER MOUNTING PAD AND DRIVE - TYPE II
SAE AS55A-1944 Tachometer@ Mounting Pad and Drive-Type II
SAE ARP71-2004 GENERATOR ENVELOPE (AUXILIARY ENGINE DRIVEN) MOUNTING PAD AND DRIVE 8 INCH BOLT CIRCLE
SAE AS53A-2004 POWER TAKE-OFF@ MOUNTING PAD & DRIVE@ TYPE I & II
SAE AS48A-2004 GUN SYNCHRONIZER@ MOUNTING PAD AND DRIVE (PDF Is Not Available)
SAE AS46-1944 Generator Mounting Pad and Drive@ 4 Bolt
SAE AS44A-1973 Starter@ Mounting Pads and Drives - Types I@ II@ III & IV
SAE AS44-1942 Starter@ Mounting Pads and Drives-Types I@ II@ III & IV
SAE J2873-2016 Electric Drive Cooling Fan Motor Mounting
SAE AS13-2013 Magnetos@ Aircraft@ Drives for
SAE AS54-1941 Tachometer Drive - Type I
SAE AS54A-2019 TACHOMETER DRIVE – TYPE I
SAE AS13-1941 Magnetos@ Aircraft@ Drives for
SAE J744-1988 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-1995 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-2021 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-2016 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J744-1983 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J721-1987 Operating Requirements for Tractors and Power Take-Off Driven Implements
SAE J721-1980 Operating Requirements for Tractors and Power Take-Off Driven Implements
SAE J721-1993 OPERATING REQUIREMENTS FOR POWER TAKE-OFF DRIVES

RO-ASRO

STAS 9990-1975 Hydraulic drives Hydraulic drives
STAS 7920-1978 Pneumatic drives FILTERS Main parameters
STAS 10725/3-1980 Hydraulic drives DIRECTIONAL CONTROL VALVES FOR DRIVES Types and main dimensions

SCC

SAE AS47A-1995 Pump, Fuel, Mounting Pad and Drive
MIL MIL-P-81653/8-1969 POWER CONTROLLER, INDICATOR DRIVER SPST, NORMAL OPEN, 500 MILLIAMPERES
MIL MIL-PRF-6106/19H-2020 Relays, Electromagnetic Permanent Magnet Drive, 25 Amperes, SPDT, Hermetically Sealed
MIL MIL-PRF-6106/19G-2011 Relays, Electromagnetic Permanent Magnet Drive, 25 Amperes, SPDT, Hermetically Sealed
CEI 301-1:1997 Electric drives - Dictionary
MIL MIL-S-83961-1971 SPRAYER, INSECTICIDE, ELECTRIC-MOTOR-DRIVEN, FRAME MOUNTED (NO S/S DOCUMENT)
CSA B222.4.2-1975 Fire Detectors, Heat Actuated
MIL MIL-DTL-60292B-2012 Initiator, Cartridge Actuated, M99 Assembly
DIN EN 61800-9-2:2018 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power drive systems and motor starters (IEC 61800-9-2:2017...
AENOR UNE 26009:1950 TACHOMETER AND COUNTER DRIVE
VDI 2158-1991 Self-locking and self-braking gears

Society of Automotive Engineers (SAE)

SAE AS47B-2013 PUMP, FUEL, MOUNTING PAD AND DRIVE
SAE AS44A-2006 STARTER, MOUNTING PADS AND DRIVES - TYPES I, II, III & IV
SAE AS8539-2019 BIT, INTERNAL RECESS DRIVER, TORX® PARALOBE® DRIVE, DIMENSIONS OF DRIVER AND GAGE
SAE AS55-1942 TACHOMETER, MOUNTING PAD AND DRIVE - TYPE II
SAE AS55A-2006 TACHOMETER MOUNTING PAD AND DRIVE - TYPE II
SAE AS46A-2001 Generator, Mounting Pad and Drive, 4 Bolt
SAE AS44B-2013 Starters, Mounting Pads and Drives, Types I, II, III, IV
SAE AS46-1995 GENERATOR MOUNTING PAD AND DRIVE, 4 BOLT
SAE J2873-2010 Electric Drive Cooling Fan Motor Mounting
SAE AS13A-2013 Magnetos, Aircraft, Drives for
SAE AS13-2006 Magnetos, Aircraft, Drives for
SAE AS54-2012 TACHOMETER DRIVE – TYPE I
SAE J640-2011 Symbols for Hydrodynamic Drives
SAE J744-2013 Hydraulic Pump and Motor Mounting and Drive Dimensions
SAE J721F-1975 OPERATING REQUIREMENTS FOR POWER TAKE-OFF DRIVES
SAE RS-623-3-1968 RS623 Accessory Drives and Mounting Pads (Taper Flanges - Involute Splines)

GSO

BH GSO ISO 1971:2017 Aircraft -- Accessory drives and mounting pads
GSO ISO 1971:2016 Aircraft -- Accessory drives and mounting pads
OS GSO ISO 1971:2016 Aircraft -- Accessory drives and mounting pads
OS GSO ISO 496:2015 Driving and driven machines -- Shaft heights
BH GSO ISO 496:2017 Driving and driven machines -- Shaft heights
GSO ISO 3317:2012 Assembly tools for screws and nuts - Square drive adaptor with hexagon or cylindrical flat drive, for power socket wrenches

Korean Agency for Technology and Standards (KATS)

KS W 1920-2013 Aircraft－Accessory drives and mounting pads
KS B 0407-2000(2005) Shaft heights for driving and driven machines
KS B 0407-1985 Shaft heights for driving and driven machines
KS E 3127-2007(2012) Chuck driver for rock drill
KS P 6127-2021 Manual(operator－powered) resuscitators
KS C IEC 61800-9-2:2020 Adjustable speed electrical power drive systems —Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications — Energy efficiency indicators for power d

GOST

GOST R 52543-2023 Hydraulic drives. Safely requirements
GOST 34965-2023 Pipeline accessories. Fire-resistant actuators

Indonesia Standards

SNI 04-4517-1998 Guidelines for operating procedures and safety instalation of pneumatic instrument driver by associated process gas

International Organization for Standardization (ISO)

ISO 1971:1975 Aircraft; Accessory drives and mounting pads
ISO 14280:2002 Aerospace - Drivers, ribbed for internal cruciform ribbed or unribbed drives - Metric series
ISO 5288:2017 Synchronous belt drives — Vocabulary

Association Francaise de Normalisation

NF L34-150:1977 Accessory drives and mounting pads (engine and gearbox).
NF L34-161:1977 Accessory drives and mounting pads (engine and gearbox).
NF C73-165:1981 Motor-operated household electrical appliances. Lawn mowers. Electrical safety requirements.
NF L86-110:1958 Feed pumps. Mounting and drive.
NF EN 61800-5-2:2017 Variable speed electric power drives - Part 5-2: safety requirements - Functional
NF L51-710:1955 Electric motors for aircraft. Fixing and drive.
NF L86-310:1958 Magnetos. Flange mounting and drive.

United States Navy

NAVY MIL-S-7867 A-1957 SERVO ACTUATOR, D-9
NAVY AND10002 REV 2-1949 MOUNTING PAD AND DRIVE - AIRCRAFT ENGINE GENERATOR AND POWER TAKE-OFF [Use: AIR FORCE AND20002 REV 3 CANC NOTICE 1, AIR FORCE AND20002 REV 3]
NAVY AND10002 REV 2 NOTICE 1-1960 MOUNTING PAD AND DRIVE - AIRCRAFT ENGINE GENERATOR AND POWER TAKE-OFF [Use: AIR FORCE AND20002 REV 3 CANC NOTICE 1, AIR FORCE AND20002 REV 3]
NAVY MIL-G-6162/1 C VALID NOTICE 1-1988 STARTER-GENERATOR, 30 VOLT, DIRECT CURRENT 400 AMPERE, AIRCRAFT ENGINE DRIVEN
NAVY AND10303 REV 5-1953 INSTALLATION CLEARANCE - TYPE XIV DRIVE
NAVY AND10320 REV 4-1953 INSTALLATION CLEARANCE - TYPE XIII DRIVE

Aeronautical Radio Inc.

ARINC 652 ITEM 2.0-1993 Software Cost Drivers

ES-AENOR

UNE 20-060 Pt.1-1990 Portable appliances driven by electric motors. Special safety conditions
UNE 20-060 Pt.2-1990 Portable appliances driven by electric motors. Special safety conditions. Parts A to G
UNE 20-060 Pt.3-1990 Portable appliances driven by electric motors. Special safety conditions. H to N parts

CZ-CSN

CSN 24 3334-1966 Heart driver
CSN 11 0021-1989 Drives of the power-operated pumps
CSN 10 9011-1978 Pneumostatic drives. Nominal air flow rates
CSN 35 6275-1957 Calibration and matching of drive electrical appliances
CSN 35 8161-1968 Lead - screwactuated variable resistors
CSN 10 9004-1982 Pneumostatic drives. General technical requirements
CSN 10 9005-1984 Unified system of industrial pneumatic components. Pneumatic drives. General safety requirements

AENOR

UNE-EN 61310-3:2008 Safety of machinery - Indication, marking and actuation -- Part 3: Requirements for the location and operation of actuators

German Institute for Standardization

DIN EN 61310-3:2008 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators (IEC 61310-3:2007); German version EN 61310-3:2008

European Committee for Standardization (CEN)

prEN 894-3-1992 Safety of machinery; ergonomics requirements for the design of displays and control actuators; part 3: control actuators
EN 708:1996 Agricultural Machinery - Soil Working Machines with Powered Tools - Safety
EN 708:1996/prA1:1999 AMD A1 Agricultural Machinery - Soil Working Machines with Powered Tools - Safety
prEN 894-1-1992 Safety of machinery; ergonomics requirements for the design of displays and control actuators; part 1: human interactions with displays and control actuators

Defense Logistics Agency

DLA MIL-DTL-82068 D-2012 SPRAYERS, PESTICIDE; TRAILER-MOUNTED, GASOLINE-ENGINE-DRIVEN
DLA MIL-PRF-6106/19 G-2011 RELAY, ELECTROMAGNETIC, PERMANENT MAGNET DRIVE, 25 AMPERES, SPDT, HERMETICALLY SEALED
DLA SMD-5962-04205-2004 MICROCIRCUIT, HYBRID, 0.5 AMP GATE DRIVE OPTOCOUPLER
DLA SMD-5962-04204-2004 MICROCIRCUIT, HYBRID, 2.0 AMP GATE DRIVE OPTOCOUPLER

RU-GOST R

GOST 12.2.101-1984 Occupational safety standards system. Pheumatic drives. General design safety requirements
GOST 16488-1970 Drivers for grinding. Design
GOST 12.3.001-1985 Occupational safety standards system. Pneumatic drives. General safety requirements for mounting, testing and maintenance

PL-PKN

PN M73860-1965 Hydraulic drive and con?rol equipment Protec?ing caps

Japanese Industrial Standards Committee (JISC)

JIS C 4551:1981 Motor driven timer

International Electrotechnical Commission (IEC)

IEC 61310-3:1999 Safety of machinery - Indication, marking and actuation - Part 3: Requirements for the location and operation of actuators
IEC 60755:2017 General safety requirements for residual current operated protective devices
IEC TR 61081:1991 Pneumatic instruments driven by associated process gas; safe installation and operating procedures; guidelines
IEC 61800-9-2:2017 Adjustable speed electrical power drive systems - Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications - Energy efficiency indicators for power

British Standards Institution (BSI)

BS A 328-2:1999 Accessory drives and mounting flanges (Metric sizes). Dimensions
BS 6850:2002 Gas powered ventilatory resuscitators
BS A 328-1:1999 Accessory drives and mounting flanges (Metric sizes). Design criteria
BS ISO 4579:2021 Aerospace. Drives, internal, TORX PARALOBE drive. Geometrical definition, gaging and technical requirements
BS ISO 4580:2021 Aerospace. Drives, internal, TORX PARALOBE driver bit. Geometrical definition, gaging and technical requirements

HU-MSZT

MSZ 4861/13-1977 Safety requirements and tests for hand tool chain driven appliances
MSZ 9968-1957 Instrument parts. drive arm
MSZ 11271-1972 Transmission gear drive
MNOSZ 280-1953 Add instrument driven vehicles

IN-BIS

IS 2031-1987 Drive and driven machines - shaft height

U.S. Military Regulations and Norms

ARMY MIL-D-52462 A VALID NOTICE 2-2000 DRIVER, DECK PIN
ARMY MIL-D-52462 A-1971 DRIVER, DECK PIN
ARMY MIL-DTL-62542 C-1998 BALL SCREW LINEAR ACTUATOR (BSLA)

DE-VDA

VDA 240-310-2011 Specification of Automotive Drives
VDA 240-300-2013 Specification of Automotive Hard Disc Drives
VDA 240-300-2011 Specification of Automotive Hard Disc Drives
VDA 240-300-2014 Specification of Automotive Hard Disc Drives
VDA 240-310-2013 Specification of Automotive Drives

SE-SIS

SIS SMS 1549-1952 Drive screw, type KDS
SIS SS 739-1983 Shaft heights for driving and driven machines
SIS SMS 739-1967 Shaft heights for driving and driven machines

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 382-1996 Qualification of actuators for power-operated valve assemblies with safety-related functions for nuclear power plants

KR-KS

KS B ISO 28139-2011 Agricultural and forestry machinery－Knapsack combustionengine-driven mistblowers－Safety requirements
KS C IEC 61800-9-2-2020 Adjustable speed electrical power drive systems —Part 9-2: Ecodesign for power drive systems, motor starters, power electronics and their driven applications — Energy efficiency indicators for power d

U.S. Air Force

AIR FORCE AN5025 REV 4 VALID NOTICE 2-2008 Cover - Propeller Governor Drive

VDI - Verein Deutscher Ingenieure

VDI 2158-1990 Self-locking and self-retarding drives

Danish Standards Foundation

DS/EN ISO 28139:2009 Agricultural and forestry machinery - Knapsack combustion-engine-driven mistblowers - Safety requirements

Others: