Aerospace Pipeline Standard Error

Aerospace Pipeline Standard Error, Total:358 items.

The international standard classification for "Aerospace Pipeline Standard Error" includes: Aerospace fluid systems and components , Solar energy engineering .

The Chinese standard classification for "Aerospace Pipeline Standard Error" includes: Port and waterway engineering , Pipe fittings, clamps and seals , Ocean energy .

Professional Standard - Traffic

JTS 180-3-2018 Navigation Standard of Waterways for Seagoing Vessel
JTJ/T 204-1996 The Standard of Basic Technical Terms for Waterway Engineering

Professional Standard - Aerospace

QJ 965-1986 基础
QJ 1835.12-1990 Provisions on Standard Review of the Management Measures for the Amendment of Aerospace Industry Standards
QJ 1835.11-1990 Abolishment of Management Measures for Amendment of Aerospace Industry Standards

Group Standards of the People's Republic of China

T/SCQA 211-2021 Standard for urban road level difference planning and design
T/SXRQRL 01-2020 Rural Pipeline Natural Gas Engineering Technical Standards

未注明发布机构

DIN ISO 8575 E:2017-10 Aerospace - Fluid systems - Hydraulic system tubing
SAE AS568F-2020 Aerospace Size Standard for O-Rings
DIN EN 9133 E:2017-09 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB 6492-1986 Standard Solar Cells for Aerospace
GB/T 6492-1986 Astronautic standard solar cell
GB/T 14409-1993 Aerospace. Pipelines. Identification

National Metrological Verification Regulations of the People's Republic of China

JJG(铁道) 162-1996 The Rules of Error for Specifical Measuring Standards of Railway

Guangdong Provincial Standard of the People's Republic of China

DB44/T 1355-2014 Navigation Standards for Coastal Waterways of Guangdong Province

Military Standard of the People's Republic of China-General Armament Department

GJB 6902-2009 Selection rule and method of spacecraft orbit
GJB 4016-2000 Medical selection criteria for astronauts
GJB 9099.6-2017 Evaluation rule and method for spacecraft lifespan prolonging － Part 6：LEO spacecraft
GJB 4992-2003 Hygienic specifications for space food
GJB 4991-2003 Hygienic standards for drinking water for astronauts

Professional Standard - Aviation

HB XGDKWZH-2005 Summary of 2005 Amendments and Errata of Aviation Industry Standards

Zhejiang Provincial Standard of the People's Republic of China

DB33/T 2037-2017 Navigation Standards for Restricted Quasi-III and Quasi-IV Channels of Inland Rivers

Jiangsu Provincial Standard of the People's Republic of China

DB32/T 3946-2020 Navigation Standards for Gated Channels in Plain Water Network Areas

National Electrical Manufacturers Association（NEMA)

NEMA WC 27500-2000 Standard for Aerospace and Industrial Electrical Cable Errata 1/17/2001
NEMA WC 27500-2012 Standard for Aerospace and Industrial Electrical Cable
NEMA WC 27500-2005 Standard for Aerospace and Industrial Electrical Cable

PL-PKN

PN M02032-1954 60 degree angle cone pipe screw inspection. error
PN M53304-1954 60 degree angle cone pipe screw inspection. error
PN L01463-1992 Aerospace. Pipelines. Identification
PN L01461-1992 Aerospace fluid systems. Thermal shock testing of piping and fittings
PN BN 3882-02-1965 Tapes to mark flexible aerospace pipes

British Standards Institution (BSI)

BS EN 14724:2003 Space project management - Tailoring of space standards
BS EN 14724:2004 Space project management - Tailoring of space standards
BS EN 9133:2018 Aerospace series. Quality Management System. Qualification Procedure for Aerospace Standard Products
BS EN 9133:2004 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
BS EN 2245:2012 Aerospace series. Pipelines for liquids and gases. Definitions
BS EN 2859:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature) / 235 °C
BS EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard
BS EN 3368:2008 Aerospace series — Aerospace design standard — Holes for locating pins
BS ISO 8574:2008 Aerospace. Hydraulic system tubing. Qualification tests for bent tubes
BS EN 4617:2006 Recommended practices for standardizing company standards
19/30389268 DC BS EN 7112. Aerospace series. Bolt, hexagonal head, shank tolerance h11, metric and inch series. Product standard
BS ISO 16031-2:2008 Aerospace fluid systems. O-Rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes. Standard tolerances for non-hydraulic systems
BS ISO 16031-2:2003 Aerospace fluid systems. O-Rings, inch series. Inside diameters and cross sections, tolerances and size-identification codes - Standard tolerances for non-hydraulic systems

SCC

DANSK DS/EN 14724:2004 Space project management - Tailoring of space standards
NS-EN 14724:2003 Space project management — Tailoring of space standards
NS-EN 9133:2004 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
AENOR UNE-EN 9133:2006 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
NS-EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
DANSK DS/EN 9133:2018 Aerospace series – Quality Management Systems – Qualification Procedure for Aerospace Standard Products
ASD-STAN PREN 9133:2016 Aerospace series Quality Management Systems Qualification Procedure for Aerospace Standard Products
DIN EN 9133 E:2017 Draft Document - Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products; German and English version FprEN 9133:2017
NS-EN 2245:2012 Aerospace series — Pipelines for liquids and gases — Definitions
DANSK DS/EN 2245:2012 Aerospace series - Pipelines for liquids and gases - Definitions
ASD-STAN PREN 2245:1984 Pipelines for Liquids and Gases Definitions Aerospace Series
NS-EN 3611:1995 Aerospace series - Spigots - Dimensions and fit selection - Design standard
NS-EN 3658:2008 Aerospace series — Tube bend radii, for engine application — Design standard
NS-EN 3368:2008 Aerospace series — Aerospace design standard — Holes for locating pins
DANSK DS/EN 3611:1995 Aerospace series - Spigots - Dimensions and fit selection - Design standard
DIN 65000-9 E:2003 Draft Document - Aerospace - Subject group index of aerospace standards - Part 9: Management systems and procedures
DANSK DS/EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins
SAE ASIN2022-2022 Aerospace Standards Index - 2022
ANSI/NEMA WC 27500-2012 Standard for Aerospace and Industrial Electrical Cable
ANSI/NEMA WC 27500-2005 Standard for Aerospace and Industrial Electrical Cable
DANSK DS/EN 4434:2005 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances)
NS-EN 4434:2005 Aerospace series — Copper or copper alloy lightweight conductors for electrical cables — Product standard (Normal and tight tolerances)
DIN EN 3368 E:1991 Draft Document - Aerospace series; aerospace design standard, holes for locating pins
CSA Z662-03 and Z662.1-2003 Oil and Gas Pipeline Systems and Commentary on CSA Standard Z662-03, Oil and Gas Pipeline Systems
MIL MIL-T-9906C-1988 TAPE, IDENTIFICATION, AEROSPACE VEHICLE TUBING MARKER (NO S/S DOCUMENT) (SUPERSEDING MIL-T-9906B)
DIN EN 2245 E:2011 Draft Document - Aerospace series - Pipelines for liquids and gases - Definitions; German and English version FprEN 2245:2011
NS-EN 2889:1995 Aerospace series — Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in alloy steel, cadmium plated — Classification: 900 MPa (at ambient temperature) / 235 °C
ASD-STAN PREN 4617:2004 Aerospace series Recommended practices for standardising company standards
DANSK DS/EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard
NS-EN 4617:2006 Aerospace series — Recommended practices for standardising company standards
NS-EN 2888:1995 Aerospace series — Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated — Classification: 600 MPa (at ambient temperature) / 425 °C
CAN 3-B45 Series-M81-1981 Standards on Plumbing Fixtures
CSA Z662.1-2003 Commentary on CSA Standard Z662-03, Oil and Gas Pipeline Systems
CSA Z662.1-2001 Commentary on CSA Standard Z662-99, Oil and Gas Pipeline Systems
ASD-STAN PREN 3658:1992 Aerospace Series Tube Bend Radii, for Engine Application Design Standard
DANSK DS/EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
UNE-EN 2859:1996 AEROSPACE SERIES. BOLTS, NORMAL HEXAGONAL HEAD, CLOSE TOLERANCE NORMAL SHANK, SHORT THREAD, IN ALLOY STEEL, CADMIUM PLATED. CLASSIFICATION: 1 100 MPA (AT AMBIENT TEMPERATURE)/235 ºC.
DIN ISO 8575 E:2017 Draft Document - Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:2016); Text in German and English
CSA Z184S1-1981 Supplement No.1-1981 to standard ACNOR Z184-M1978, Gas pipeline networks
NS-EN 2888:2006 Aerospace series — Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated — Classification: 600 MPa (at ambient temperature)/425 °C
DANSK DS/EN 3612:1996 Aerospace series - Undercuts for splines - Design standard

European Committee for Standardization (CEN)

EN 14724:2003 Space project management - Tailoring of space standards
EN 3145:2001 Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm <= D <= 250 mm; Dimensions
EN 4131:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in heat resisting nickel base alloy, aluminium IVD coated - Classification: 1 250 MPa (at ambient temperature) / 425 Degrees C (Incorporating corrigendum
EN 4129:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in alloy steel, cadmium plated - Classification: 1 100 MPa (at ambient temperature) / 235 Degrees C (Incorporating corrigendum April 2010)
EN 3788:2001 Aerospace Series - Pipe Coupling 8 Degrees 30?- Protective Caps
EN 2245:2012 Aerospace series - Pipelines for liquids and gases - Definitions
EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard
EN 4130:2009 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, aluminium IVD coated - Classification: 1 100 MPa (at ambient temperature) / 425 Degrees C (Incorporating corrigendum April 2010)
EN 2859:1995 Aerospace Series - Bolts, Normal Hexagonal Head, Close Tolerance Normal Shank, Short Thread, in Alloy Steel, Cadmium Plated - Classification: 1100 MPa (at Ambient Temperature)/235 Degrees C
EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins
EN 2859:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1100 MPa (at ambient temperature) / 235 °C
EN 9133:2004 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
CEN EN 3658-2008 Aerospace series — Tube bend radii, for engine application — Design standard
EN 4617:2006 Aerospace series - Recommended practices for standardising company standards
EN 9121:2005 Aerospace series - Quality management systems - Assessment applicable to stockist distributors
EN 2888:2006 Aerospace series - Metric Bolts, normal hexagon head, coarse tolerance normal shank, short thread, in corrosion resisting steel, passivated - Classification: 600 MPa (at ambient temperature)/425 °C
EN 2888:1995 Aerospace Series - Bolts, Normal Hexagonal Head, Coarse Tolerance Normal Shank, Short Thread, in Corrosion Resisting Steel, Passivated - Classification: 600 MPa (at Ambient Temperature) /425 Degrees C
EN 2870:1996 Aerospace Series - Bolts, Normal Bihexagonal Head, Close Tolerance Normal Shank, Short Thread, in Titanium Alloy, Anodized, MoS2 Lubricated - Classification: 1100 MPa (at Ambient Temperature) /315 Degrees C
prEN 3052-1992 Aerospace series; bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated; classification: 1100 MPa; (at ambient temperature)/425 C
EN 3155-005:2006 Aerospace series - Electrical contacts used in elements of connection - Part 005: Contacts, electrical, female, type A, crimp, class T - Product standard

Association Francaise de Normalisation

NF L90-102:2004 Space project management - Tailoring of space standards.
NF ISO 12:1988 Aéronautique et espace - Tuyauteries - Identification.
NF EN 4434:2006 Aerospace series - Reduced tolerance copper or copper alloy conductors for electrical cables - Product standard (normal and reduced tolerances)
NF L00-102:2006 Aerospace series - Quality management systems - Variation management of key characteristics.
NF L00-102*NF EN 9103:2016 Aerospace series - Qualité management systems - Variation management of key characteristics
NF L40-201*NF ISO 12:1988 Aerospace. Pipelines. Identification.
NF L00-104*NF EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
NF L00-104:2005 Aerospace series - Quality management systems - Qualification Procedure for aerospace standard parts.
NF EN 4617:2006 Série aérospatiale - Normaliser les standards d'entreprise
NF EN 9133:2018 Aerospace series - Quality management systems - Qualification procedure for standardized aerospace parts
NF EN 2245:2014 Série aérospatiale - Canalisations pour liquides et gaz - Définitions
NF L43-112*NF EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard.
NF L20-027*NF EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins
NF L24-147*NF EN 4136:2010 Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC.
NF L24-150*NF EN 4127:2010 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification : 1 100 MPa (at ambient temperature)/425 oC
NF L24-105*NF EN 2887:1995 Aerospace series. Bolts, normal hexagonal head, threaded to head, in corrosion resisting steel, passivated. Classification : 600 MPa (at ambient temperature) / 425 degrees celsius.
NF L24-103*NF EN 2549:2006 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1100 MPa (at ambient temperature)/315oC
NF L24-128*NF EN 4132:2010 Aerospace series - Bolts, normal hexagonal head, coarse tolerance normal shank, long thread, in alloy steel, cadmium plated - Classification : 1 100 MPa (at ambient temperature)/235 oC
NF EN 4302:2008 Série aérospatiale - Embouts cannelés, à tuyauter, à carré conducteur axial
NF EN 3086:2019 Série aérospatiale - Tuyauteries flexibles - Désignation limitée à 15 caractères
NF EN 3658:2008 Aerospace series - Tube bending radius, for engine applications - Design standard
NF EN 4840-002:2023 Aerospace series - Heat shrink sleeves - Part 002: product standards index and product dimensions
NF L00-014*NF EN 4617:2006 Aerospace series - Recommanded parctices for standardising compagny standards
NF L12-005*NF EN 3145:2002 Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm inferior or equal to D inferior or equal to 250 mm - Dimensions.
NF L24-101*NF EN 3052:2010 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated - Classification: 1 100 MPa (at ambient temperature)/425 oC
NF EN 4180:2002 Aerospace series - Circular tubes, for pipes in titanium and titanium alloys - Wide tolerances - Diameters 4 mm less than or equal to D less than or equal to 40 mm - Dimensions
NF L24-146*NF EN 4135:2010 Aerospace series - Bolts, normal bi-hexagonal head, coarse tolerance normal shank, medium length thread, in titanium alloy, anodized, MoS2 lubricated - Classification : 1 100 MPa (at ambient temperature)/315oC
NF EN 3268:2014 Aerospace series - 8o30' titanium alloy connection system - Pipe obturators
NF EN 4708-002:2023 Aerospace series - Heat shrink, junction, insulation and identification sleeves - Part 002: index of product standards
NF ISO 7661:1987 Aeronautics and space - Fluid systems - Axially aligned pipe support combs - Design and qualification tests - Metric series
NF L24-153*NF EN 4071:2010 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in titanium alloy, aluminium IVD coated - Classification : 1 100 MPa (at ambient temperature)/425 oC

German Institute for Standardization

DIN EN 14724:2005 Space project management - Tailoring of space standards; German version EN 14724:2003
DIN EN 9133:2018-10 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products; German and English version EN 9133:2018
DIN EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products; German and English version EN 9133:2018
DIN 65000-1:1983 Aerospace; subject group index of aerospace standards; basic standards, materials, semifinished products, standard parts
DIN 65178-2:1985 Aerospace; configuration and installation of fluid pipelines; tube assemblies, design
DIN ISO 8575:1998 Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:1990)
DIN ISO 8575:2018-08 Aerospace - Fluid systems - Hydraulic system tubing (ISO 8575:2016); Text in German and English
DIN EN 9133:2007 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts; German and English version EN 9133:2004
DIN 65178-3:1985 Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture
DIN EN 2245:2012-05 Aerospace series - Pipelines for liquids and gases - Definitions; German and English version EN 2245:2012
DIN EN 3368:2008-06 Aerospace series - Aerospace design standard - Holes for locating pins; German and English version EN 3368:2008
DIN EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard; German and English version EN 3658:2008
DIN 65000-2:1984-12 Aerospace; subject group index of aerospace standards; electrical engineering
DIN EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins; German and English version EN 3368:2008
DIN EN 2859:2008 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated, metric series - Classification: 1100 MPa (at ambient temperature)/235 °C; German and English version EN 2859:2006
DIN 65178-6:1987 Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture
DIN 9370:1985-04 Aerospace; tubes; classification, pressure terms; calculation and design criteria
DIN EN 13292:1999 Aerospace series - Space engineering standards; Policy and principles; German version EN 13292:1999
DIN EN 4434:2006-10 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances); German and English version EN 4434:2005
DIN 9370:1985 Aerospace; tubes; classification, pressure terms; calculation and design criteria
DIN 65000-5:1983 Aerospace; subject group index of aerospace standards; workshop facilities
DIN EN 3658:2008-12 Aerospace series - Tube bend radii, for engine application - Design standard; German and English version EN 3658:2008
DIN EN 4617:2008-02 Aerospace series - Recommended practices for standardising company standards; German and English version EN 4617:2006
DIN EN 3145:2003 Aerospace series - Round bars, hot rolled in steel - Normal tolerances; Diameter 6 mm D 250 mm; Dimensions; German and English version EN 3145:2001
DIN 65178-3:1985-12 Aerospace; configuration and installation of fluid pipelines; tube assemblies, manufacture
DIN 65000-2:1984 Aerospace; subject group index of aerospace standards; electrical engineering
DIN 65178-1:1985 Aerospace; configuration and installation of fluid pipelines; survey and definitions
DIN 65178-2:1985-12 Aerospace; configuration and installation of fluid pipelines; tube assemblies, design
DIN EN 3612:1996 Aerospace series - Undercuts for splines - Design standard; German version EN 3612:1996
DIN EN 4496 Berichtigung 1:2007 Aerospace series - Screws, 100° countersunk normal head, offset cruciform recess, close tolerance normal shank, short thread, in titanium alloy, anodized, with aluminium pigmented coating - Classification: 1100 MPa (at ambient temperature)/315 °C; German
DIN 65178-6:1987-01 Aerospace; configuration and design of fluid pipelines; hose assemblies, manufacture
DIN 65000-6:1983 Aerospace; subject group index of aerospace standards; manufacturing (technological processes)
DIN EN 14514:2004 Space engineering standards - Functional analysis; German and English version EN 14514:2004

AWS - American Welding Society

D10.9-1969 Standard for Qualification of Welding Procedures and Welders for Piping and Tubing (Errata)

GSO

GSO ISO 12:2015 Aerospace -- Pipelines -- Identification
BH GSO ISO 12:2017 Aerospace -- Pipelines -- Identification
OS GSO ISO 12:2015 Aerospace -- Pipelines -- Identification
GSO ISO 2964:2015 Aerospace -- Tubing -- Outside diameters and thicknesses -- Metric dimensions
BH GSO 2417:2015 Petroleum and Natural Gas Industries - Standard for Abandonment of oil & gas pipeline
GSO 2417:2014 Petroleum and Natural Gas Industries - Standard for Abandonment of oil & gas pipeline
GSO ISO 10583:2015 Aerospace fluid systems -- Test methods for tube/fitting assemblies
GSO ISO 16031-2:2015 Aerospace fluid systems -- O-rings, inch series: Inside diameters and cross-sections, tolerances and size-identification codes -- Part 2: Standard tolerances for non-hydraulic systems
GSO ISO 6773:2016 Aerospace -- Fluid systems -- Thermal shock testing of piping and fittings
OS GSO ISO 6773:2016 Aerospace -- Fluid systems -- Thermal shock testing of piping and fittings

CZ-CSN

CSN ISO 12:1993 Aerospace. Pipelines. Identification holes of civil
CSN 31 0001 Dil.3-2005 Czech aerospace technical standards. the term

European Association of Aerospace Industries

AECMA PREN 3145-1995 Aerospace Series Round Bars with Normal Tolerances Hot Formed, in Steel Diameter 6 mm Less Than or Equal to D Less Than or Equal to 250 mm Dimensions Edition P 1
AECMA PREN 3658-1990 Aerospace Series Tube Bend Radii Design Standard Edition 1
AECMA PREN 4434-2003 Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances) Edition P 2
AECMA PREN 4023-2009 Aerospace Series Pipe Coupling 8 Degrees 30' in Titanium Alloy Elbows 45 Degrees Edition P 2
AECMA PREN 9133-2002 Aerospace series Quality management systems Qualification Procedure for Aerospace Standard Parts Edition P 1; Supersedes EN 3042: 1991 [Replaced: ASD-STAN PREN 3042]
AECMA PREN 3371-1994 Aerospace Series Electrical Bonding Technical Specification Edition P 1

RU-GOST R

GOST 8.381-1980 State system for ensuring the uniformity of measurements. Standards. The ways of expressing the errors
GOST R 56514-2015 Strength standard for automated spacecraft

Korean Agency for Technology and Standards (KATS)

KS W 0611-2013 Aerospace -Pipelines-Identification
KS W 0611-1982 Aerospace -Pipelines-Identification
KS W 0611-1991(2011) Aerospace -Pipelines-Identification
KS W 0611-1991 Aerospace -Pipelines-Identification
KS W 0911-1987 Aerospace Fusion Welders Qualification
KS W 0911-1982 Aerospace Fusion Welders Qualification
KS T 2015-2010 Tolerances of rack structure for automatic highrised warehouse
KS W ISO 6773:2020 Aerospace — Fluid systems — Thermal shock testing of piping and fittings
KS W ISO 10201-2007(2012) Aerospace－Standards for electronic instruments and systems
KS W ISO 6773:2002 Aerospace－Fluid systems－Thermal shock testing of piping and fittings
KS W ISO 10201:2016 Aerospace－Standards for electronic instruments and systems

AENOR

UNE 28007:1998 AEROSPACE. PIPELINES. IDENTIFICATION.
UNE-EN 9133:2006 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
UNE 28586:1986 AEROSPACE FLUID SYSTEMS. IMPULSE TESTING OF HYDRAULIC HOSE, TUBING AND FITTINGS ASSEMBLIES.

GOST

GOST 27384-1987 Water. Rates of measurement error of characteristics of composition and properties

Aerospace, Security and Defence Industries Association of Europe (ASD)

ASD-STAN PREN 4434-2003 Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances) (Edition P 2)
ASD-STAN PREN 9133-2016 Aerospace series Quality Management Systems Qualification Procedure for Aerospace Standard Products (Edition P 2)
ASD-STAN PREN 6080-2005 Aerospace Series Rivet, 100 Degrees Normal Flush Head, Close Tolerance Inch Series (Edition P 3;:2001 Edition P 1)
ASD-STAN PREN 9103-2012 Aerospace series - Quality management systems - Variation management of key characteristics Edition P 2
ASD-STAN PREN 3658-1992 Aerospace Series Tube Bend Radii, for Engine Application Design Standard (Issue P 1)
ASD-STAN TR 4618-2014 Aerospace series Aircraft internal air quality standards, criteria and determination methods (Edition 1; Incorporated Corrigendum: 11/13/2014)
ASD-STAN PREN 6101-2005 Aerospace series Rivet, 100° medium flush head, close tolerance Inch series (Edition P 2; Corrigendum: 06/30/2006;:2001 Edition P 1)
ASD-STAN PREN 2245-1984 Pipelines for Liquids and Gases Definitions Aerospace Series (Edition 2)

SAE - SAE International

SAE ARP735A-2011 Aerospace Vehicle Cryogenic Duct Systems
SAE AS INDEX-2019 Aerospace Standards Index - 2019
SAE AS INDEX-2018 Aerospace Standards Index - 2018
SAE AS INDEX-2016 Aerospace Standards Index - 2016
SAE AS INDEX-2017 Aerospace Standards Index - 2017
SAE ARP735-1980 AEROSPACE VEHICLE CRYOGENIC DUCT SYSTEMS
SAE AS INDEX-2015 Aerospace Standards Index - 2015
SAE AS568-1971 Aerospace Size Standard for O-Rings
SAE AS568A-1974 Aerospace Size Standard for O-Rings

Danish Standards Foundation

DS/EN 9133:2005 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
DS/EN 4434:2006 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances)
DS/EN 3145:2002 Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm < D < 250 mm - Dimensions
DS/EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard
DS/EN 2245:2012 Aerospace series - Pipelines for liquids and gases - Definitions
DS/EN 3611:1995 Aerospace series - Spigots - Dimensions and fit selection - Design standard
DS/EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins
DS/EN 4617:2006 Aerospace series - Recommended practices for standardising company standards

Lithuanian Standards Office

LST EN 9133-2005 Aerospace series - Quality management systems - Qualification procedure for aerospace standard parts
LST EN 4434-2006 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances)
LST EN 3145-2002 Aerospace series - Round bars, hot rolled in steel - Normal tolerances - Diameter 6 mm < D < 250 mm - Dimensions
LST EN 3658-2008 Aerospace series - Tube bend radii, for engine application - Design standard
LST EN 2245-2012 Aerospace series - Pipelines for liquids and gases - Definitions
LST EN 3611-2001 Aerospace series - Spigots - Dimensions and fit selection - Design standard
LST EN 3368-2008 Aerospace series - Aerospace design standard - Holes for locating pins
LST EN 4617-2006 Aerospace series - Recommended practices for standardising company standards

American Society for Testing and Materials (ASTM)

ASTM F3658-23 Standard Guide for Crewed Suborbital Space Vehicle Design
ASTM F3658-24 Standard Guide for Crewed Suborbital Space Vehicle Design
ASTM E2862-18 Standard Practice for Probability of Detection Analysis for Hit/Miss Data
ASTM D79-86(1999) Standard Specification for Zinc Oxide Pigments
ASTM D7999-15 Standard Classification for Rubber Products in Natural Gas Pipeline Applications
ASTM D7999-15(2019) Standard Classification for Rubber Products in Natural Gas Pipeline Applications
ASTM D799-74(1995) Standard Classification of Rubber Products for Natural Gas Pipeline Applications
ASTM F721-18 Standard Specification for Gage Piping Assemblies

ES-UNE

UNE-EN 9133:2019 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products
UNE-EN 2245:2012 Aerospace series - Pipelines for liquids and gases - Definitions (Endorsed by AENOR in April of 2012.)
UNE-EN 3368:2008 Aerospace series - Aerospace design standard - Holes for locating pins (Endorsed by AENOR in May of 2008.)
UNE-EN 4434:2005 Aerospace series - Copper or copper alloy lightweight conductors for electrical cables - Product standard (Normal and tight tolerances) (Endorsed by AENOR in March of 2006.)
UNE-EN 3658:2008 Aerospace series - Tube bend radii, for engine application - Design standard (Endorsed by AENOR in May of 2008.)
UNE-EN 4617:2006 Aerospace series - Recommended practices for standardising company standards (Endorsed by AENOR in July of 2006.)

Japanese Industrial Standards Committee (JISC)

JIS W 0601:1990 Aerospace -- Pipelines -- Identification
JIS W 0203:1995 Reference atmospheres for aerospace use

International Organization for Standardization (ISO)

ISO 12573:2010 Aircraft - Tubing tolerances - Inch series
ISO 14313:2007/cor 1:2009 Petroleum and natural gas industries - Pipeline transportation systems - Pipeline valves; Technical Corrigendum 1
ISO 13847:2000/Cor 1:2001 Petroleum and natural gas industries - Pipeline transportation systems - Welding of pipelines; Technical Corrigendum 1
ISO 12:1987 Aerospace; Pipelines; Identification
ISO 12:1977 Aerospace; Pipelines; Identification
ISO 12:1976 Aerospace - Pipelines - Identification scheme
ISO 9528:1989/Cor 1:1990 Aerospace — Standard-weight polytetrafluoroethylene (PTFE) hose assemblies, classification 204 degrees C/21 000 kPa — Procurement specification — Technical Corrigendum 1
ISO 15389:2001/cor 1:2006 Space systems - Flight-to-ground umbilicals; Technical Corrigendum 1
ISO 7315:1985 Aerospace — "P" clamps (loop clamps) for fluid tubing installations — Dimensions
ISO 13443:1996/Cor 1:1997 Natural gas - Standard reference conditions; Technical Corrigendum 1
ISO 6773:1994 Aerospace - Fluid systems - Thermal shock testing of piping and fittings
ISO/TR 10201:1989 Aerospace — Standards for electronic instruments and systems
ISO/TR 10201:2001 Aerospace - Standards for electronic instruments and systems

ASD-STAN - Aerospace and Defence Industries Association of Europe - Standardization

TR 4618-2014 Aerospace series Aircraft internal air quality standards@ criteria and determination methods (Edition 1; Incorporated Corrigendum: 11/13/2014)
PREN 4434-2003 Aerospace Series Copper or Copper Alloy Lightweight Conductors for Electrical Cables Product Standard (Normal and tight tolerances) (Edition P 2)
PREN 9133-2016 Aerospace series Quality Management Systems Qualification Procedure for Aerospace Standard Products (Edition P 2)
PREN 3658-1990 Aerospace Series Tube Bend Radii Design Standard (Edition 1)
PREN 9133-2002 Aerospace series Quality management systems Qualification Procedure for Aerospace Standard Parts (Edition P 1; Supersedes EN 3042: 1991)
PREN 2245-1984 Pipelines for Liquids and Gases Definitions Aerospace Series (Edition 2)
PREN 4708-103-2017 Aerospace series Sleeving@ heat-shrinkable@ for binding@ insulation and identification Part 103: Fluoroelastomer sleeves - Operating temperature - 55 °C to 200 °C - Product standard (Edition P 1; Incorporating Corrigendum: 07/13/2017)

Society of Automotive Engineers (SAE)

SAE ARP994C-2023 Design of Tubing Installations for Aerospace Hydraulic Systems
SAE ARP1987/3-2013 Titles, SAE Subcommittee G-3E Aerospace Tubing Installation Documents, Selection Of
SAE AIR5693-2004 Compatibility of PTFE Hose Assemblies With Typical Fluids Found in Aerospace Applications
SAE AS INDEX-2021 AEROSPACE SPECIFICATIONS INDEX - 2021 (AEROSPACE STANDARDS (INCLUDING CONVERTED MILITARY SPECIFICATIONS)-AEROSPACE RECOMMENDED PRACTICES -AEROSPACE INFORMATION REPORTS-AEROSPACE RESOURCE DOCUMENTS-METRIC AEROSPACE STANDARDS AND RECOMMENDED PRACTICES)
SAE AS568C-2008 Aerospace Size Standard for O-Rings
SAE AS5502B-2008 Standard Requirements for Aerospace Sealants
SAE AS568A-1995 AEROSPACE SIZE STANDARD FOR O-RINGS
SAE AS568E-2020 Aerospace Size Standard for O-Rings
SAE AIR6897-2020 Battery Management Systems for Rechargeable Lithium Batteries Used in Aerospace Standards
SAE AS568D-2014 Aerospace Size Standard for O-rings
SAE AS4833-1995 Aircraft New Tire Standard - Bias and Radial
SAE AS27465AR-6-2022 AS27465AR Amendment Record for Aerospace Standard AS27465-499
SAE ARP798A-2007 (R) Design Criteria for White Incandescent Lighted Aerospace Instruments
SAE AIR737A-1963 AEROSPACE HYDRAULIC AND PNEUMATIC SPECIFICATIONS AND STANDARDS
SAE AIR1408A-1986 Aerospace Fuel System Specifications and Standards

IT-UNI

UNI 6100-1967 Pipe metal flange. deviations and flags

AIAA - American Institute of Aeronautics and Astronautics

SP-039-1990 Future of Aerospace Standards
S-115-2013 Low Earth Orbit Spacecraft Charging Design Standard Requirement and Associated Handbook

CEN - European Committee for Standardization

EN 9133:2018 Aerospace series - Quality Management Systems - Qualification Procedure for Aerospace Standard Products

BE-NBN

NBN 384.71-1957 Spacecraft 30RD piping system, identification code
NBN E 03-101-1986 Thread processing, pipe threads, used for thread sealing interfaces. Terms, names, dimensions and tolerances

American Society of Civil Engineers (ASCE)

ASCE 36-01-2001 Standard Construction Guidelines for Microtunneling Errata

FI-SFS

SFS 3177-1978 Natural Gas Pipeline. logo

TH-TISI

TIS 871-1989 Standard for shuttles

American Institute of Aeronautics and Astronautics (AIAA)

AIAA SP-039-1990 Future of Aerospace Standards
AIAA S-001-1991 Standard Terminology for Space Structures

U.S. Air-Conditioning, Heating, and Refrigeration Institute (US-AHRI)

ARI 700 APP C-1999 Analytical Procedures for ARI Standard

DIN

DIN EN 2859:1995 Aerospace series - Bolts, normal hexagonal head, close tolerance normal shank, short thread, in alloy steel, cadmium plated - Classification: 1100 MPa (at ambient temperature)/235 Â°C; German version EN 2859:1995

AT-ON

ONORM EN 3052-1994 Aerospace series. Bolts, normal hexagonal head, close tolerance normal shank, short thread, in heat and corrosion resisting steel, passivated. Classification: 1100 MPa (at ambient temperature) / 425 degree C

Institute of Electrical and Electronics Engineers (IEEE)

Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping
Corrigendum to IEEE Std 802.3-2015 as amended by IEEE Std 802.3bw-2015, IEEE Std 802.3by-2016, IEEE IEEE Standard for Ethernet - Corrigendum 1: Multi-lane Timestamping

Standard Association of Australia （SAA）

AS 2360.7.1:2001 Measurement of fluid flow in closed conduits - Assessment of uncertainty in the calibration and use of flow measurement devices - Linear calibration relationships
AS/NZS CISPR 16.4.1:2006 Specification for radio disturbance and immunity measuring apparatus and methods - Uncertainties, statistics and limit modelling - Uncertainties in standardized EMC tests
ISO 14125:1998/Amd.1:2011 Fibre-reinforced plastic composites — Determination of flexural properties AMENDMENT 1

American National Standards Institute （ANSI)

ANSI/NEMA WC27500-2011 Standard for Aerospace and Industrial Electrical Cable
ASME B31P-2023 Standard Heat Treatments for Piping

(U.S.) Plastic Pipe Association

PPI TR-5-2001 Standards for Plastics Piping

KR-KS

KS W ISO 6773-2020 Aerospace — Fluid systems — Thermal shock testing of piping and fittings

US-DOT

DOT 49 CFR PT 192-2010 TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS
DOT 49 CFR PT 192-2008 TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS

GB-REG

REG 49 CFR PART 192-2011 TRANSPORTATION OF NATURAL AND OTHER GAS BY PIPELINE: MINIMUM FEDERAL SAFETY STANDARDS

Others: