Permeability coefficient at standard temperature

Permeability coefficient at standard temperature, Total:92 items.

The international standard classification for "Permeability coefficient at standard temperature" includes: Non-destructive testing .

The Chinese standard classification for "Permeability coefficient at standard temperature" includes: Basic standards and general methods .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 18851.5-2014 Non-destructive testing―Penetrant testing―Part 5: Penetrant testing at temperatures higher than 50 ℃
GB/T 18851.6-2014 Non-destructive testing―Penetrant testing―Part 6: Penetrant testing at temperatures lower than 10℃

Military Standard of the People's Republic of China-General Armament Department

GJB 2709-1996 Test method for low temperature gas permeability coefficient of organic materials

Association Francaise de Normalisation

NF EN ISO 3452-6:2009 Essais non destructifs - Examen par ressuage - Partie 6 : examen par ressuage a des températures inférieures à 10oC
NF EN ISO 3452-5:2009 Essais non destructifs - Examen par ressuage - Partie 5 : examen par ressuage à des températures supérieures à 50oC
NF X30-443:2014 Waste - Laboratory determination of the saturation permeability coefficient of a material - Flexible wall permeameter with constant hydraulic gradient
NF X30-441:2008 Waste - Laboratory determination of the saturation permeability coefficient of a material - Permeability tests using a rigid wall permeameter with constant/variable hydraulic gradient
NF A09-120-5*NF EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5 : penetrant testing at temperatures higher than 50 oC.
NF A09-120-6*NF EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6 : penetrant testing at temperatures lower than 10 oC.
NF X30-442:2008 Waste - Laboratory determination of the saturation permeability coefficient of a material - Oedometer permeability tests at constant/variable hydraulic load

British Standards Institution (BSI)

BS EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures higher than 50 degrees C
BS EN ISO 3452-5:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures higher than 50 degrees C
BS EN ISO 3452-5:2008(2015) Non - destructive testing — Penetrant testing Part 5 : Penetrant testing at temperatures higher than 50 degrees C
BS EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Penetrant testing at temperatures lower than 10 degrees C
BS EN ISO 3452-6:2009 Non-destructive testing. Penetrant testing. Penetrant testing at temperatures lower than 10 degrees C
BS ISO 11359-3:2019 Plastics. Thermomechanical analysis (TMA). Determination of penetration temperature
BS ISO 11359-3:2002 Plastics - Thermomechanical analysis (TMA) - Determination of penetration temperature
06/30151661 DC BS EN ISO 3452-6. Non-destructive testing. Penetrant testing. Part 6. Penetrant testing at temperatures lower than 10 degreesC
BS EN 12390-8:2019 Testing hardened concrete. Depth of penetration of water under pressure

GCC Standardization Organization

GSO ISO 3452-5:2013 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C

International Organization for Standardization (ISO)

ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C
ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C

European Committee for Standardization (CEN)

EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)

Japanese Industrial Standards Committee (JISC)

JIS Z 2343-6:2012 Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degree C
JSA JIS Z 2343-5-2012 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures above 50°C
JIS Z 2343-5:2012 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degree C

German Institute for Standardization

DIN EN ISO 3452-5:2009 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); English version of DIN EN ISO 3452-5:2009-04
DIN EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C (ISO 3452-6:2008); English version of DIN EN ISO 3452-6:2009-04
DIN EN ISO 3452-6:2009-04 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 °C (ISO 3452-6:2008); German version EN ISO 3452-6:2008
DIN EN ISO 3452-5:2009-04 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 °C (ISO 3452-5:2008); German version EN ISO 3452-5:2008

Korean Agency for Technology and Standards (KATS)

KS F 2597-2021 Standard test method for water penetration depth into concrete under pressure
KS B ISO 3452-6:2022 Non-destructive testing — Penetrant testing — Part 6: Penetrant testing at temperatures lower than 10 ℃
KS B ISO 3452-5:2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃
KS B ISO 3452-6-2022 Non-destructive testing — Penetrant testing — Part 6: Penetrant testing at temperatures lower than 10 ℃
KS B ISO 3452-5-2022 Non-destructive testing — Penetrant testing — Part 5: Penetrant testing at temperatures higher than 50 ℃

American Society for Testing and Materials (ASTM)

ASTM E2178-11 Standard Test Method for Air Permeance of Building Materials
ASTM D7100-04 Standard Test Method for Hydraulic Conductivity Compatibility Testing of Soils with Aqueous Solutions that may Alter Hydraulic Conductivity
ASTM C1125-89(2009) Standard Test Method for Penetration Index of Asbestos
ASTM C1125-89(1999)e1 Standard Test Method for Penetration Index of Asbestos
ASTM C1701/C1701M-17a Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM C1781/C1781M-21 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1125-89(2015) Standard Test Method for Penetration Index of Asbestos
ASTM C1701/C1701M-17 Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM D4516-19a Standard Practice for Standardizing Reverse Osmosis Performance Data
ASTM C1125-89(2004) Standard Test Method for Penetration Index of Asbestos
ASTM D4516-00 Standard Practice for Standardizing Reverse Osmosis Performance Data
ASTM D4516-00(2006)e1 Standard Practice for Standardizing Reverse Osmosis Performance Data
ASTM D4516-00(2010) Standard Practice for Standardizing Reverse Osmosis Performance Data
ASTM D4516-19 Standard Practice for Standardizing Reverse Osmosis Performance Data
ASTM C1781/C1781M-14 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1781/C1781M-15 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM E2750-11 Standard Guide for Extension of Data For Penetrations Seals
ASTM C1781/C1781M-13 Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM C1781/C1781M-14a Standard Test Method for Surface Infiltration Rate of Permeable Unit Pavement Systems
ASTM D7243-11 Standard Guide for Measuring the Saturated Hydraulic Conductivity of Paper Industry Sludges
ASTM C1701/C1701M-17a(2023) Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM D5090-20 Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
ASTM E1135-19 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM D4472-08 Standard Guide for Recordkeeping for Reverse Osmosis and Nanofiltration Systems
ASTM F2952-22 Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
ASTM E1135-12 Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM D5090-90(2001) Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
ASTM E1135-19(2024) Standard Test Method for Comparing the Brightness of Fluorescent Penetrants
ASTM D6807-17 Standard Test Method for Operating Performance of Continuous Electrodeionization Systems on Reverse Osmosis Permeates from 2 to 100 μS/cm
ASTM D5090-07 Standard Practice for Standardizing Ultrafiltration Permeate Flow Performance Data
ASTM D1003-00 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM D3385-03 Standard Test Method for Infiltration Rate of Soils in Field Using Double-Ring Infiltrometer
ASTM D4195-88(1998)e1 Standard Guide for Water Analysis for Reverse Osmosis Application
ASTM F1927-20 Standard Test Method for Determination of Oxygen Gas Transmission Rate, Permeability and Permeance at Controlled Relative Humidity Through Barrier Materials Using a Coulometric Detector
ASTM D1003-13 Standard Test Method for Haze and Luminous Transmittance of Transparent Plastics
ASTM E2750-17 Standard Guide for Extension of Data from Penetration Firestop System Tests Conducted in Accordance with ASTM
ASTM C1701/C1701M-09 Standard Test Method for Infiltration Rate of In Place Pervious Concrete
ASTM F2952-14 Standard Guide for Determining the Mean Darcy Permeability Coefficient for a Porous Tissue Scaffold
ASTM E2945-14 Standard Test Method for Film Permeability Determination Using Static Permeability Cells

Swedish Institute for Standards

SS-EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
SS-EN ISO 3452-6:2008 Non-destrucitve testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)

Standard Association of Australia （SAA）

AS Z24.18.1:1968 Methods of test for pressure sensitive adhesive tapes, Method 18.1: Resistance to penetration - Resistance to penetration at elevated temperatures
AS ISO 3452.6:2020 Non-destructive testing — Penetrant testing, Part 6: Penetrant testing at temperatures lower than 10 °C
AS ISO 3452.5:2020 Non-destructive testing — Penetrant testing, Part 5: Penetrant testing at temperatures higher than 50 °C
AS 1635.18.1:1974 Methods of testing pressure sensitive adhesive tape - Resistance to penetration at elevated temperatures

CZ-CSN

CSN 64 0282-1978 Determination of the permeability and urbidity coefficient

Gosstandart of Russia

GOST 12.4.173-1987 Occupational safety standards system. Personal protective means against alkalies. Norms of alkali permeability

GM Global

GMW 14680-2012 Determination of Fuel Permeability of Hoses at High Temperature Issue 2; English

GM North America

GM GM6401M-2000 "Low Permeability Fuel Filler Hoses, Moderate Temperature"

Standards Norway

NS-EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)

Spanish Association for Standardization (UNE)

AENOR UNE-EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C (ISO 3452-6:2008)

American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE)

ASHRAE LO-09-085-2009 Infiltration in ASHRAE’s Residential Ventilation Standards

Ente Nazionale Italiano di Unificazione

UNI EN ISO 3452-6:2009 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures lower than 10 degrees C
UNI EN 12390-8:2002 Testing hardened concrete - Depth of penetration of water under pressure

Society of Automotive Engineers (SAE)

SAE AS5447-2018 Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination
SAE AS5447-2000 Acceptance Criteria for Nuts - Magnetic Particle, Fluorescent Penetrant, and Visible Penetrant Examination

Others: Standard Test Method for Monotonic Equibiaxial Flexibility Strength of Advanced Ceramics at Ambient Temperature