Quantitative standard curve

Quantitative standard curve, Total:134 items.

The international standard classification for "Quantitative standard curve" includes: Noise with respect to human beings , food products in general .

The Chinese standard classification for "Quantitative standard curve" includes: Acoustic Measurement , Food sanitation , Electromagnetic Measurement .

Group Standards of the People's Republic of China

T/CECS 1068-2022 Reliability Appraisal Standards for Hyperbolic Cooling Towers
T/SHZSAQS 00084-2022 Formaldehyde standard curve preparation technical regulations
T/GDPA 6-2021 Quality standard of Trelagliptin succinate
T/SXCAA 012-2021 Guidelines for Quality Control of Linear Calibration Curves

未注明发布机构

NF P61-503 Ceramic tiles. Determination of bending resistance. (European Standard EN 100)
ASTM E1541-98(2003) Standard Practice for Specifying and Matching Color Using the Colorcurve System
DIN ISO 226 E:2001-11 Acoustics - Normal equal-loudness-level contours

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 4963-2007 Acoustics—Normal equal-loudness-level contours
GB 2761-1981 Hygienic standard for tolerances of aflatoxin B1 in foods

National Metrological Verification Regulations of the People's Republic of China

JJG 1088-2019 Standard Devices for Calibration of Ophthalmometers
JJG 1088-2013 Standard Devices for Calibration of Ophthalmometers
JJG 872-1994 Verification Regulation for Standard Measuring Coils of Magnetic Flux

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2914-2023 Highway traffic marking quality condition assessment standards

National Health Commission of the People's Republic of China

GB 5009.24-2016 National Food Safety Standard — Determination of M Aflatoxins in Foods

Institute of Electrical and Electronics Engineers (IEEE)

IEEE 1459-2000 Trial-use standard definitions for the measurement of electric power quantities under sinusoidal, nonsinusoidal, balanced, or unbalanced conditions
IEEE 1459-2010 Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced, or Unbalanced Conditions

American Society for Testing and Materials (ASTM)

ASTM E561-21 Standard Test Method for K R Curve Determination
ASTM E561-20 Standard Test Method for K R Curve Determination
ASTM E561-19e1 Standard Test Method for K R Curve Determination
ASTM E561-22 Standard Test Method for K R Curve Determination
ASTM E561-19 Standard Test Method for K R Curve Determination
ASTM E561-10e1 Standard Test Method for K-R Curve Determination
ASTM E561-08e1 Standard Test Method for K-R Curve Determination
ASTM E561-15 Standard Test Method for K R Curve Determination
ASTM E561-98 Standard Practice for R-Curve Determination
ASTM E561-08 Standard Test Method for K-R Curve Determination
ASTM E561-05 Standard Test Method for K-R Curve Determination
ASTM E561-10e2 Standard Test Method for K-R Curve Determination
ASTM E561-05e1 Standard Test Method for K-R Curve Determination
ASTM E561-15a Standard Test Method for K R Curve Determination
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM E2218-02(2008) Standard Test Method for Determining Forming Limit Curves
ASTM E2218-15 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-23 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14 Standard Test Method for Determining Forming Limit Curves
ASTM E2218-14e1 Standard Test Method for Determining Forming Limit Curves
ASTM E561-10 Standard Test Method for K-R Curve Determination
ASTM D2493/D2493M-09 Standard Viscosity-Temperature Chart for Asphalts
ASTM D6068-96(2002)e1 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E2218-02 Standard Test Method for Determining Forming Limit Curves
ASTM D6068-10 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E746-02 Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E746-93(1998) Standard Test Method for Determining Relative Image Quality Response of Industrial Radiographic Film
ASTM E561-23 Standard Test Method for K R Curve Determination
ASTM D6068-10(2018) Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM E746-07 Standard Practice for Determining Relative Image Quality Response of Industrial Radiographic Imaging Systems
ASTM C1656-07 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM D6068-96 Standard Test Method for Determining J-R Curves of Plastic Materials
ASTM F1832-07 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D4695-96 Standard Guide for General Pavement Deflection Measurements
ASTM D4695-03 Standard Guide for General Pavement Deflection Measurements
ASTM C485-83(2003) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM C158-02(2012) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1656-13 Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables using Exothermic Profile
ASTM C485-83(2003)e1 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM D1336-07(2011) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM F3141-23 Standard Guide for Total Knee Replacement Loading Profiles
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM C158-02(2017) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C158-02(2007) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C485-83(1999) Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM E1541-98 Standard Practice for Specifying and Matching Color Using the Colorcurve System
ASTM D87-07a Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM B478-85(1997)e1 Standard Test Method for Cross Curvature of Thermostat Metals
ASTM B478-85(2008) Standard Test Method for Cross Curvature of Thermostat Metals
ASTM C485-16 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM D87-07 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM C158-95(2000) Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D87-09(2014) Standard Test Method for Melting Point of Petroleum Wax 40;Cooling Curve41;
ASTM C485-24 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM C1699-09(2015) Standard Test Method for Moisture Retention Curves of Porous Building Materials Using Pressure Plates
ASTM D4695-03(2008) Standard Guide for General Pavement Deflection Measurements
ASTM E1082-90(2007) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C158-95 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM D87-09 Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM C158-02 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM C1656-13(2023) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM C158-23 Standard Test Methods for Strength of Glass by Flexure (Determination of Modulus of Rupture)
ASTM E1082-90(2012) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM E1082-90(2002) Standard Test Method for Measurement of Vehicular Response to Traveled Surface Roughness
ASTM C1656-13(2018) Standard Guide for Measuring the Reactivity of Hydraulic Refractory Castables Using Exothermic Profile
ASTM C485-09 Standard Test Method for Measuring Warpage of Ceramic Tile
ASTM F2771-10(2016) Standard Test Method for Determining the Luminance Curve of an Electroluminescent Lamp at Ambient Conditions
ASTM D1336-07(2015) Standard Test Method for Distortion of Yarn in Woven Fabrics
ASTM D87-09(2018) Standard Test Method for Melting Point of Petroleum Wax (Cooling Curve)
ASTM D5023-01 Standard Test Method for Measuring the Dynamic Mechanical Properties: In Flexure (Three-Point Bending)
ASTM D747-08 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam
ASTM D747-02 Standard Test Method for Apparent Bending Modulus of Plastics by Means of a Cantilever Beam

British Standards Institution (BSI)

BS ISO 226:2003 Acoustics - Normal equal-loudness-level contours

International Organization for Standardization (ISO)

ISO 226:1987 Acoustics; Normal equal-loudness level contours
ISO 226:2023 Acoustics — Normal equal-loudness-level contours
ISO 226:2003 Acoustics - Normal equal-loudness-level contours

RU-GOST R

GOST 9735-1987 Profile grinders. Standards of accuracy

The American Road & Transportation Builders Association

AASHTO R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
AASHTO R 75-2016(R2020) Standard Practice for Developing a Family of Curves
AASHTO T 272-2010 Standard Method of Test for Family of Curves-One Point Method
AASHTO T 272-2015 Standard Method of Test for Family of Curves-One Point Method
AASHTO R 62-2013(R2017) Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures

Association Francaise de Normalisation

NF S30-003*NF ISO 226:2004 Acoustics - Normal equal-loudness-level contours

AASHTO - American Association of State Highway and Transportation Officials

R 62-2013 Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
T 272-2010 Standard Method of Test for Family of Curves—One Point Method
PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
T 272-2015 Standard Method of Test for Family of Curves-One Point Method
T 272-2004 Standard Method of Test for Family of Curves - One-Point Method

Korean Agency for Technology and Standards (KATS)

KS I ISO 226:2014 Acoustics — Normal equal-loudness level contours
KS I ISO 226:2003 Acoustics-Normal equal-loudness level contours
KS D ISO 16592-2011(2021) Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method
KS D ISO 16592-2021 Microbeam analysis－Electron probe microanalysis－Guidelines for determining the carbon content of steels using a calibration curve method

PK-PSQCA

PS 122-1985 PAKISTAN STANDARD METHOD FOR THE DETERMINATION OF CRIMP OF YARN IN FABRIC

SCC

AASHTO R 75-2016(2020) Standard Practice for Developing a Family of Curves
AASHTO R 62-2013(2021) Standard Practice for Developing Dynamic Modulus Master Curves for Asphalt Mixtures
AASHTO PP 62-2009 Standard Practice for Developing Dynamic Modulus Master Curves for Hot Mix Asphalt (HMA)
AASHTO T 272-2004 Standard Method of Test for Family of Curves---One-Point Method
AS 1469:1973 Criteria curves for rating noise and establishing acoustic environment
AS A106:1957 Australian standard method for the determination of the flexural strength of flexure test specimens
BS ISO 16592:2006 Microbeam analysis. Electron probe microanalysis. Guidelines for determining the carbon content of steels using a calibration curve method

SE-SIS

Nr 39-1992 Curve electronics according to Swedish standards
SIS SMS 2027-1975 Dust separating. Standard curves for dust

German Institute for Standardization

DIN ISO 226:2006 Acoustics - Normal equal-loudness-level contours (ISO 226:2003);English version of DIN ISO 226:2006-04
DIN 53019-1:1980 Viscometry; Determination of viscosities and flow curves using standard design rotary viscometers with a standard geometry measuring system

Society of Automotive Engineers (SAE)

SAE J739-1991 Cutting Edge - Curved Grader, Standard June 1991

American National Standards Institute （ANSI)

ANSI/IEEE C37.112:1996 Standard Inverse-Time Characteristic for Overcurrent Relays

GSO

BH GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
GSO ASTM F3141:2023 Standard Guide for Total Knee Replacement Loading Profiles
GSO ISO 16592:2015 Microbeam analysis -- Electron probe microanalysis -- Guidelines for determining the carbon content of steels using a calibration curve method
OS GSO ISO 16592:2015 Microbeam analysis -- Electron probe microanalysis -- Guidelines for determining the carbon content of steels using a calibration curve method

IT-UNI

UNI S 195-1943 Insulation material standards. Numerical charts and graphs

VE-FONDONORMA

COVENIN 907-1975 Provision for Single Twist Measurement of Steel Wires in the Venezuelan Ferrous Materials Standard
COVENIN 636-1974 Provisions on twist coefficient of spinning yarn in Venezuelan national standards

ESDU - Engineering Sciences Data Unit

STRUCT 02.01.09 B-1976 Inter-rivet buckling curves for specific materials.

American Society of Mechanical Engineers (ASME)

ASME STP-PT-094-2022 Determination of Stress Strain Curves of 304, 304L, 316, 316L for Strain-Based Design Criteria

YU-JUS

JUS U.M1.042-1987 Determination of ultrasonic pulse velocity and calibration curve

BR-ABNT

ABNT PB-528-1979 railway. Fixed facility building boundaries. The tangent and curve radii are greater than 500 m. Standard gauge and broad gauge