Tensile test standard table

Tensile test standard table, Total:357 items.

The international standard classification for "Tensile test standard table" includes: Occupational safety. Industrial hygiene , Surface active agents , Mechanical testing , Mechanical testing of metals , Jewellery , Ophthalmic equipment .

The Chinese standard classification for "Tensile test standard table" includes: School sanitation , Basic standards and general methods for surface active agent , Metal material testing machine , Metal mechanical property test method , Artistic handicrafts .

Hebei Provincial Standard of the People's Republic of China

DB1311/T 039-2023 Calibration specifications for adhesion tester (pull-out method)

未注明发布机构

ASTM RR-D31-1012 2010 D7584-Standard Test Method for Resistance to Growth of Fungi on the Surface of Wet Blue in an Environmental Chamber
ASTM RR-D13-1131 2011 D7744-Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes
ASTM RR-C21-1005 2007 C1028-Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM RR-F03-1006 1978 F0607- Standard Test Method for Adhesion of Gasket Materials to Metal Surfaces
DIN 53292:1976 Testing of sandwiches; Tensile test perpendicular to the faces
ASTM RR-D13-1127 2010 D7269-Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM RR-D02-1174 1984 D6896-Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Used Engine Oils at Low Temperature

中华人民共和国卫生部、中国国家标准化管理委员会

GB/T 11533-2011 Standard for logarithmic visual acuity charts

National Metrological Verification Regulations of the People's Republic of China

JJG(铁道) 160-1996 Verification Regulation of Tensiometer for Railway
JJG(石油) 08-1991 Verification Regulation of pulling Force Gauge

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 16825.1-2002 Verification of static uniaxial testing machines--Part 1:Tension/compression testing machines--Verification and calibration of the force-measuring system
GB/T 16825.1-2008 Verification of static uniaxial testing machines - Part 1：Tension/compression testing machines - Verification and calibration of the force-measuring system
GB/T 5549-2010 Surface active agents—Determination of surface tension by drawing up liquid films
GB 11533-2011 Standard for logarithmic visual acuity charts
GB/T 5549-1990 Surface active agents Determination of surface tension by drawing up liquid films
GB/T 16825.1-2022 Metallic materials—Calibration and verification of static uniaxial testing machines—Part1:Tension/compression testing machines—Calibration and verification of the force-measuring system

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35777-2017 Mechanical tests for metal alloys adornment chains―Tensile testing

中华人民共和国国家卫生和计划生育委员会

GB 11533-1989 STANDARD logarithmic visual acuity charts

Professional Standard - Light Industry

QB/T 1323-1991 Detergent - Determination of Surface Tension - Circular Ring Lifting Liquid Film Method

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38722-2020 Surface active agents—Determination of interfacial tension—Drawing up liquid films

CU-NC

NC 12-04-50-1987 Standards System for Protection Against Corrosion. Paint and Varnish Coatings. Tensile Separation Test

Korean Agency for Technology and Standards (KATS)

KS P ISO 8596:2006 Ophthalmic optics－Visual acuity testing－Standard optotype and its presentation
KS P ISO 8596-2021 Ophthalmic optics－Visual acuity testing－Standard optotype and its presentation
KS P ISO 8596-2006(2021) Ophthalmic optics－Visual acuity testing－Standard optotype and its presentation
KS M ISO 304:2003 Surface active agents－Determination of surface tension by drawing up liquid films
KS M ISO 304-2003(2018) Surface active agents－Determination of surface tension by drawing up liquid films
KS F 4207-2019 Standard specifications for prestressed concrete ties
KS M ISO 6889:2003 Surface active agents－Determination of interfacial tension by drawing up liquid films
KS B 5521-2022 Tensile testing machines
KS M ISO 6889-2003(2018) Surface active agents－Determination of interfacial tension by drawing up liquid films
KS P ISO 8596-2006(2016) Ophthalmic optics－Visual acuity testing－Standard optotype and its presentation

International Organization for Standardization (ISO)

ISO 8596:2009 Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation
ISO 304:1985 Surface active agents; Determination of surface tension by drawing up liquid films
ISO 7500-1:2004 Metallic materials - Verification of static uniaxial testing machines - Part 1: Tension/compression testing machines - Verification and calibration of the force-measuring system
ISO 304:1985/cor 1:1998 Surface active agents - Determination of surface tension by drawing up liquid films; Technical Corrigendum 1
ISO 6889:1986 Surface active agents; Determination of interfacial tension by drawing up liquid films

British Standards Institution (BSI)

BS EN ISO 8596:2018 Ophthalmic optics. Visual acuity testing. Standard and clinical optotypes and their presentation
BS EN ISO 8596:2009 Ophthalmic optics - Visual acuity testing - Standard optotype and its presentation(ISO 8596:2009)
BS EN ISO 8596:2018+A1:2020 Ophthalmic optics. Visual acuity testing. Standard and clinical optotypes and their presentation
BS ISO 6481:2019 Test conditions for vertical surface type broaching machines. Testing of accuracy
BS IEC 62880-1:2017 Semiconductor devices. Stress migration test standard - Copper stress migration test standard
BS EN ISO 4624:2016 Paints and varnishes — Pulloff test for adhesion
19/30378401 DC BS EN ISO 8596 AMD1. Ophthalmic optics. Visual acuity testing. Standard and clinical optotypes and their presentation
BS ISO 789-1:2018 Agricultural tractors. Test procedures. Power tests for power take-off
BS EN 10002-2:1992(1998) Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines

American Society for Testing and Materials (ASTM)

ASTM D2059/D2059M-03(2009) Standard Test Method for Resistance of Zippers to Salt Spray (Fog)
ASTM D2059-03 Standard Test Method for Resistance of Zippers to Salt Spray (Fog)
ASTM D7234-21 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM C1028-07 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM C1028-06 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM D5026-15 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM C1028-07e1 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM D5026-95a Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D5026-06 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D5026-01 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM F1832-07(2011) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM D4435-08 Standard Test Method for Rock Bolt Anchor Pull Test
ASTM D1708-06a Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D1708-06 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM C1377-97(2003)e1 Standard Test Method for Calibration of Surface/Stress Measuring Devices
ASTM D4435-04 Standard Test Method for Rock Bolt Anchor Pull Test
ASTM D4435-13 Standard Test Method for Rock Bolt Anchor Pull Test
ASTM D4435-84(1998) Standard Test Method for Rock Bolt Anchor Pull Test
ASTM C1377-97(2003) Standard Test Method for Calibration of Surface/Stress Measuring Devices
ASTM D2051-14(2022) Standard Test Method for Durability of Finish of Zippers to Laundering
ASTM D3631-99(2011) Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM E670-09(2020) Standard Test Method for Testing Side Force Friction on Paved Surfaces Using the Mu-Meter
ASTM E754-80(2006) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM D2051-86(1997) Standard Test Method for Durability of Finish of Zippers to Laundering
ASTM E754-80(2022) Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM D4435-13e1 Standard Test Method for Rock Bolt Anchor Pull Test
ASTM E754-80(2014)e1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM E754-80(2000)e1 Standard Test Method for Pullout Resistance of Ties and Anchors Embedded in Masonry Mortar Joints
ASTM C1377-97(2009) Standard Test Method for Calibration of Surface/Stress Measuring Devices
ASTM C1377-97 Standard Test Method for Calibration of Surface/Stress Measuring Devices
ASTM D4964-96(2012)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D4964-96(2012) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D3500-90(2003) Standard Test Methods for Structural Panels in Tension
ASTM F1832-97 Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM C749-08 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D2051-03 Standard Test Method for Durability of Finish of Zippers to Laundering
ASTM F1588-96(2019) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
ASTM D5344-22 Standard Test Method for Extension Force of Partially Oriented Yarn
ASTM F1832-07(2017) Standard Test Method for Determining the Force-Draw and Let-Down Curves for Archery Bows
ASTM F1588-96(2007) Standard Test Method for Constant Tensile Load Joint Test (CTLJT)
ASTM D4964-96(2004) Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM C749-92(1996) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D2059/D2059M-03(2014) Standard Test Method for Resistance of Zippers to Salt Spray 40;Fog41;
ASTM D2058-03(2014) Standard Test Method for Durability of Finish of Zippers to Drycleaning
ASTM C749-13 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-08(2010)e1 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM C749-92(2002) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM E519-07 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM D4518-91 Standard Test Methods for Measuring Static Friction of Coating Surfaces
ASTM D7234-12 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D7234-19 Standard Test Method for Pull-Off Adhesion Strength of Coatings on Concrete Using Portable Pull-Off Adhesion Testers
ASTM D2060-00 Standard Test Methods for Measuring Zipper Dimensions
ASTM D7401-08 Standard Test Methods for Laboratory Determination of Rock Anchor Capacities by Pull and Drop Tests
ASTM D2058-03(2009) Standard Test Method for Durability of Finish of Zippers to Drycleaning
ASTM D6182-00(2005) Standard Test Method for Flexibility and Adhesion of Finish on Leather
ASTM D6706-01(2013) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM F256-94(1999) Standard Specification for Chromium-Iron Sealing Alloys with 18 or 26 Percent Chromium
ASTM D2058-03 Standard Test Method for Durability of Finish of Zippers to Drycleaning
ASTM D4541-22 Standard Test Method for Pull-Off Strength of Coatings Using Portable Adhesion Testers
ASTM D1002-05 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D2051-14 Standard Test Method for Durability of Finish of Zippers to Laundering
ASTM D2051-03(2009) Standard Test Method for Durability of Finish of Zippers to Laundering
ASTM D2919-01 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D1002-01 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM D1002-99 Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-to-Metal)
ASTM C1028-96 Standard Test Method for Determining the Static Coefficient of Friction of Ceramic Tile and Other Like Surfaces by the Horizontal Dynamometer Pull-Meter Method
ASTM E519/E519M-15 Standard Test Method for Diagonal Tension (Shear) in Masonry Assemblages
ASTM F2569-11(2019) Standard Test Method for Evaluating the Force Reduction Properties of Surfaces for Athletic Use
ASTM D2060-14e1 Standard Test Methods for Measuring Zipper Dimensions
ASTM D2919-01(2007) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D2919-01e1 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D2919-01(2014) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM C749-15(2020) Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D6706-01 Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM D2919-00 Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D6706-01(2007) Standard Test Method for Measuring Geosynthetic Pullout Resistance in Soil
ASTM C749-15 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ASTM D897-01 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D897-08 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D3107-07(2015) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3107-07(2011) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3107-07e1 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D897-01e1 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D897-00 Standard Test Method for Tensile Properties of Adhesive Bonds
ASTM D5026-06(2014)e1 Standard Test Method for Plastics: Dynamic Mechanical Properties: In Tension
ASTM D3825-90(2005) Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
ASTM D4964-96(2008)e1 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM D1708-18 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM E2899-24 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM D1708-02a Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D1708-96 Standard Test Method for Tensile Properties of Plastics By Use of Microtensile Specimens
ASTM D2060-14 Standard Test Methods for Measuring Zipper Dimensions
ASTM D2062-87(1997)e1 Standard Test Methods for Operability of Zippers
ASTM E8/E8M-13a Standard Test Methods for Tension Testing of Metallic Materials
ASTM F2018-00(2006) Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D2060-00(2010) Standard Test Methods for Measuring Zipper Dimensions
ASTM D4964-96(2008)e2 Standard Test Method for Tension and Elongation of Elastic Fabrics (Constant-Rate-of-Extension Type Tensile Testing Machine)
ASTM F2634-10 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM D3404-91(2004) Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
ASTM D2060-14(2022) Standard Test Methods for Measuring Zipper Dimensions
ASTM D3825-90(1995) Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
ASTM E2899-15 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM F2018-00 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM F2018-00e1 Standard Test Method for Time-to-Failure of Plastics Using Plane Strain Tensile Specimens
ASTM D2060-00(2005)e1 Standard Test Methods for Measuring Zipper Dimensions
ASTM D2062-03(2021) Standard Test Methods for Operability of Zippers
ASTM E2899-13 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E740-03 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM E740/E740M-23 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM D1331-89(1995) Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
ASTM D1331-89(2001) Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
ASTM D1331-11 Standard Test Methods for Surface and Interfacial Tension of Solutions of Surface-Active Agents
ASTM D3107-07 Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM E2359/E2359M-13(2018) Standard Test Method for Field Pull Testing of an In-Place Exterior Insulation and Finish System Clad Wall Assembly
ASTM D2054-99(2015) Standard Test Method for Colorfastness of Zipper Tapes to Crocking
ASTM D5179-02 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM C496-96 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM D1708-13 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM F2634-07 Standard Test Method for Laboratory Testing of Polyethylene (PE) Butt Fusion Joints using Tensile-Impact Method
ASTM E235-88(1996)e1 Standard Specification for Thermocouples, Sheathed, Type K, for Nuclear or for Other High-Reliability Applications
ASTM C496/C496M-11 Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens
ASTM D2731-07(2012) Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2057-96 Standard Test Method for Colorfastness of Zippers to Laundering
ASTM D3807-98(2012) Standard Test Method for Strength Properties of Adhesives in Cleavage Peel by Tension Loading (Engineering Plastics-to-Engineering Plastics)
ASTM D5179-98 Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM D2919-01(2023) Standard Test Method for Determining Durability of Adhesive Joints Stressed in Shear by Tension Loading
ASTM D1708-10 Standard Test Method for Tensile Properties of Plastics by Use of Microtensile Specimens
ASTM D3825-90(2000) Standard Test Method for Dynamic Surface Tension by the Fast-Bubble Technique
ASTM D5179-02(2008) Standard Test Method for Measuring Adhesion of Organic Coatings to Plastic Substrates by Direct Tensile Testing
ASTM D8576-24 Standard Test Method for Measuring the Thread Length and Pull-off Force of a Lubricating Grease by using the Falex TAA Instrument
ASTM D3107-07(2019) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D3404-91(1998) Standard Guide for Measuring Matric Potential in the Vadose Zone Using Tensiometers
ASTM D3404-15 Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
ASTM D3404-91(2013) Standard Guide for Measuring Matric Potential in Vadose Zone Using Tensiometers
ASTM D2731-15 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2731-07 Standard Test Method for Elastic Properties of Elastomeric Yarns (CRE Type Tensile Testing Machines)
ASTM D2294-96(2008) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D2294-96 Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM D7269-07 Standard Test Methods for Tensile Testing of Aramid Yarns
ASTM D3107-07(2021) Standard Test Methods for Stretch Properties of Fabrics Woven from Stretch Yarns
ASTM D585-97(2007) Standard Practice for Sampling and Accepting a Single Lot of Paper, Paperboard, Fiberboard, and Related Product
ASTM D5859-96e1 Standard Test Method for Determining the Traction of Footwear on Painted Surfaces Using the Variable Incidence Tester
ASTM E2899-19e1 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM E1824-09 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM D2057-01 Standard Test Method for Colorfastness of Zippers to Laundering
ASTM E2529-06(2022) Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM E289-04(2016) Standard Test Method for Linear Thermal Expansion of Rigid Solids with Interferometry
ASTM D7556-10 Standard Test Methods for Determining Small-Strain Tensile Properties of Geogrids and Geotextiles by In-Air Cyclic Tension Tests
ASTM F842-04 Standard Test Methods for Measuring the Forced Entry Resistance of Sliding Door Assemblies, Excluding Glazing Impact
ASTM D5179-16(2021) Standard Test Method for Measuring Adhesion of Organic Coatings in the Laboratory by Direct Tensile Method
ASTM D2294-96(2002) Standard Test Method for Creep Properties of Adhesives in Shear by Tension Loading (Metal-to-Metal)
ASTM E2529-06e1 Standard Guide for Testing the Resolution of a Raman Spectrometer
ASTM D7745-11 Standard Practice for Testing Pultruded Composites
ASTM E2899-19 Standard Test Method for Measurement of Initiation Toughness in Surface Cracks Under Tension and Bending
ASTM D2290-19a Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM C900-06 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM E1012-12e1 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E1012-12 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM D3631-99(2017) Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM E1012-14 Standard Practice for Verification of Testing Frame and Specimen Alignment Under Tensile and Compressive Axial Force Application
ASTM E740-88(1995)e1 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens
ASTM C756-87(2016) Standard Test Method for Cleanability of Surface Finishes
ASTM D5648-94 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM C756-87(2011)e1 Standard Test Method for Cleanability of Surface Finishes
ASTM D2290-19 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D8480-23 Standard Test Method for Determining the Tensile Strength of GCCM Materials
ASTM C900-12 Standard Test Method for Pullout Strength of Hardened Concrete
ASTM E1194-87(1993)e1 Standard Test Method for Vapor Pressure
ASTM D2290-16 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe
ASTM D5648-01 Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM E1194-17 Standard Test Method for Vapor Pressure
ASTM D5648-01(2008) Standard Test Method for Torque-Tension Relationship of Adhesives Used on Threaded Fasteners (Lubricity)
ASTM D2061-07(2021) Standard Test Methods for Strength Tests for Zippers
ASTM D3631-99(2007) Standard Test Methods for Measuring Surface Atmospheric Pressure
ASTM D1623-78(1995) Standard Test Method for Tensile And Tensile Adhesion Properties Of Rigid Cellular Plastics
ASTM F1052-20 Standard Test Method for Pressure Testing Vapor Protective Suits
ASTM F3291-17 Standard Test Method for Measuring the Force-Resistance of a Membrane Force Sensor
ASTM C756-87(2021) Standard Test Method for Cleanability of Surface Finishes
ASTM D2061-93(1998) Standard Test Methods for Strength Tests for Zippers
ASTM D2261-13 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D2261-11 Standard Test Method for Tearing Strength of Fabrics by the Tongue (Single Rip) Procedure (Constant-Rate-of-Extension Tensile Testing Machine)
ASTM D4977/D4977M-03(2019) Standard Test Method for Granule Adhesion to Mineral Surfaced Roofing by Abrasion
ASTM E1194-01 Standard Test Method for Vapor Pressure
ASTM D7744/D7744M-11 Standard Test Methods for Tensile Testing of High Performance Polyethylene Tapes
ASTM D1623-17 Standard Test Method for Tensile and Tensile Adhesion Properties of Rigid Cellular Plastics
ASTM D4475-96 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method
ASTM D8363-20 Standard Test Method for Rubber—Stress Relaxation in Tension Under Non-Isothermal Conditions
ASTM D4475-02(2008) Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
ASTM D4475-21 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By the Short-Beam Method
ASTM E1824-09e1 Standard Test Method for Assignment of a Glass Transition Temperature Using Thermomechanical Analysis: Tension Method
ASTM D4475-02 Standard Test Method for Apparent Horizontal Shear Strength of Pultruded Reinforced Plastic Rods By The Short-Beam Method
ASTM E740/E740M-03(2010)e2 Standard Practice for Fracture Testing with Surface-Crack Tension Specimens

American National Standards Institute （ANSI)

BS EN ISO 4624:2023 Paints and varnishes. Pull-off test for adhesion (British Standard)
ANSI/ASTM C749:2015 Standard Test Method for Tensile Stress-Strain of Carbon and Graphite
ANSI/APCO/NENA 1.102.1-2010 Service Capability Criteria Rating Scale

SCC

HOLDEN HN 0160-1980 Moulding Adhesion Test (Pluck Test)
HOLDEN HN 0160-2012 Moulding Adhesion Test (Pluck Test)
NS-EN ISO 8596:1996 Ophthalmic optics — Visual acuity testing — Standard optotype and its presentation (ISO 8596:1994)
NS-EN ISO 8596:2009 Ophthalmic optics — Visual acuity testing — Standard optotype and its presentation (ISO 8596:2009)
UNE-EN ISO 8596:1996 OPHTHALMIC OPTICS. VISUAL ACUITY TESTING. STANDARD OPTOTYPE AND ITS PRESENTATION. (ISO 8596:1994).
MIL MIL-STD-859B-2015 Standard Calibration Table for Aeronautical Pressure Measuring Equipment
DANSK DS/EN ISO 8596:2018 Ophthalmic optics – Visual acuity testing – Standard and clinical optotypes and their presentation (ISO 8596:2017)
IEC 62137-1-1:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
CEI EN 62137-1-1:2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
DANSK DS/EN 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
AS 2983.14:1987 Methods of test for synthetic sporting surfaces - Determination of withdrawal force of tufts or loops
AENOR UNE-EN ISO 10734:2016 Footwear. Test methods for zippers. Zipper puller strength. (ISO 10734:2016).
AASHTO T 273-1986(2022) Standard Method of Test for Soil Suction
AENOR UNE 26163:1963 Pressure gauges for automobiles. Quality standard.
FCI 15-1-2020 Standard for Production Testing of Pressure Regulators
BS EN 10002-3:1995 Tensile testing of metallic materials-Calibration of force proving instruments used for the verification of uniaxial testing machines
BS EN 10002-2:1992 Tensile testing of metallic materials-Verification of the force measuring system of the tensile testing machine
DANSK DS/EN ISO 4624:2016 Paints and varnishes – Pull-off test for adhesion

RO-ASRO

STAS SR ISO 8596:1995 Ophthalmic optics - Visual acuity testing Standard optotype and its presentation
STAS 2172-1984 Tests of metals TENSILE TESTING OF STEEL WIRE ROPES
STAS 12544-1987 TECHNOLOGICAL TESTS OF STEEL TUBES Ring tensile test
STAS 12310/3-1985 MECHANICAL TESTINGS OF ADHESIVED BONDED JOINTS Tensile test

ES-UNE

UNE-EN ISO 8596:2018 Ophthalmic optics - Visual acuity testing -- Standard and clinical optotypes and their presentation (ISO 8596:2017)
UNE-EN ISO 8596:2018/A1:2020 Ophthalmic optics - Visual acuity testing - Standard and clinical optotypes and their presentation - Amendment 1 (ISO 8596:2017/Amd1:2019)
UNE-EN 62137-1-1:2007 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint -- Part 1-1: Pull strength test (IEC 62137-1-1:2007). (Endorsed by AENOR in December of 2007.)
UNE-EN ISO 4624:2016 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016)

PL-PKN

PN R36151-09-1992 Agricultural tractors Test procedures Power tests for drawbar
PN R36151-01-1992 Agricultural tractors Test procedures Power test for power take-off

Association Francaise de Normalisation

NF S12-112*NF EN ISO 8596:2018 Ophthalmic optics - Visual acuity testing - Standard and clinical optotypes and their presentation
NF T73-060:1987 Surface active agents. Determination of surface tension by drawing up liquid films.
NF EN ISO 10734:2016 Chaussures - Méthodes d'essai pour des fermetures à glissière - Résistance des tirettes des fermetures à glissière
NF B51-123:1987 Wood based panels. Determination of modulus of elasticity in tension and of tensile strength parallel to faces.
NF A03-002:1991 METALLIC MATERIALS. TENSILE TESTING. PART 2 : VERIFICATION OF THE FORCE MEASURING SYSTEM OF THE TENSILE TESTING MACHINES. (EUROPEAN STANDARD EN 10002-2).
NF T73-061:1987 Surface active agents. Determination of interfacial tension by drawing up liquid films.
NF EN ISO 14916:2017 Thermal projection - Measurement of adhesion by traction tests

AENOR

UNE 68005-1:1986 AGRICULTURAL TRACTORS. POWER TAKE-OFF POWER AND STANDARDIZED TEST FOR FUEL CONSUMPTION. TEST METHODS
UNE 15326:1993 ACCEPTANCE CONDITIONS FOR VERTICAL SURFACE TYPE BROACHING MACHINES. TESTING OF ACCURACY.
UNE 115238:2005 Earth-moving machinery. Method of test for the measurement of drawbar pull

SAE - SAE International

SAE USCAR11-1998 Torque-Tension Testing and Evaluation of Fastener Finishes

Society of Automotive Engineers (SAE)

SAE J2503-2012 Drawbar Pull Performance Criteria
SAE J1808-2015 Vacuum Power Assist Brake Booster Test Procedure@ Standard

VE-FONDONORMA

COVENIN 643-1975 Test methods for centrifugal hydraulic pumps in Venezuelan national standards
NORVEN 517-1976 Testing of film resistance to breakage in Venezuelan film standards
COVENIN 571-1976 Test methods for gravity of liquid substances in Venezuelan national standards
COVENIN 957-1976 Test method for surface area of ceramic fine bricks in Venezuelan fine brick standards
COVENIN 958-1976 Test methods for surface curvature of ceramic fine bricks in Venezuelan fine brick standards
COVENIN 852-1975 Test methods for bending resistance in Venezuelan plastic film standards
COVENIN 650-1974 Graphical test of resistance to flow point in Venezuelan screw load test standard
COVENIN 959-1976 Test method for water absorption capacity of ceramic fine bricks in Venezuelan fine brick standards
COVENIN 911-1975 Inspection equipment for surface chromium hardness testing in Venezuelan ferrous material standards
COVENIN 762-1975 Tests for surface Rockwell hardness in Venezuelan ferrous material standards (scales N and T)
COVENIN 654-1974 Measurement of surface decarburization of screws in Venezuelan national standards
COVENIN 969-1976 Test methods for steel pipes in the Venezuelan ferrous material standards (internal hydrostatic pressure method)

IL-SII

S.I.557-1965 TESTING OF PLASTIC MATERIALS: TENSILE TESTS
S.I.615-1966 EBONITE : TENSILE TEST

FI-SFS

SFS 3151-1976 plastic pipe. Pull test

JP-NDIS

NDIS 4001-2008 Glossary of standard terms for stress and strain measurements

The American Road & Transportation Builders Association

AASHTO T 322-2007 Standard Method of Test for Determining the Creep Compliance and Strength of Hot-Mix Asphalt (HMA) Using the Indirect Tensile Test Device
AASHTO T 273-86(R2018) Standard Method of Test for Soil Suction

IT-UNI

UNI 6326-1968 Tensile testing machinery. Calibration check
UNI 6800-1971 Elastic material: finished product. Elastic wire tension test. apparent coefficient

BR-ABNT

ABNT MB-882-1978 Tensile and compression testing equipment qualification
ABNT P-MB-57 Test methods for tensile testing of vulcanized rubber

BE-NBN

NBN T 63-101-1987 Surface active agents - Derermination of surface tension by drawing up liquid films
NBN-EN 319-1994 Chipboard and fiberboard. Determination of resistance when vertical tension is applied to the surface of a plate
NBN T 63-155-1987 Surface active agents - Determination of interfacial tension by drawing up liquid films

YU-JUS

JUS H.E8.047-1991 Surface active agents. ?et&rmination of surface tension by ?raving up liquid films

KR-KS

KS M ISO 304-2003(2023) Surface active agents－Determination of surface tension by drawing up liquid films
KS M ISO 6889-2003(2023) Surface active agents－Determination of interfacial tension by drawing up liquid films

RU-GOST R

GOST R 50003-1992 Surface active agents. Determination of surface tension by drawing up liquid films

U.S. Air Force

AIR FORCE MIL-STD-859 A REINST NOTICE 3-2006 STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT
AIR FORCE MIL-STD-859 A NOTICE 1-1979 STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT
AIR FORCE MIL-STD-859 A-1968 STANDARD CALIBRATION TABLE FOR AERONAUTICAL PRESSURE MEASURING EQUIPMENT

AT-ON

ONORM ISO 7464:1985 Earth moving machinery; method of fest for the measurement of drawbar pull

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 1210-2004/COR 1-2014 IEEE Standard Tests for Determining Compatibility of Cable-Pulling Lubricants with Wire and Cable - Corrigendum 1
IEEE Std C57.19.00/COR-2010 Errata to IEEE Standard General Requirements and Test Procedure for Power Apparatus Bushings
IEEE P1210-2004/Cor 1/D2, August 2013 IEEE Draft Standard Tests for Determining Compatibility of Cable-Pulling Lubricants With Wire and Cable - Corrigendum 1
IEEE Std 1671.1-2017/Cor 1-2023 (Corrigendum to IEEE Std 1671.2-2017) IEEE Standard for Automatic Test Markup Language (ATML) Test Descriptions - Corrigendum 1
IEEE 835/INTRO-1994 Standard Power Cable Ampacity Tables
IEEE 497-1977 IEEE Trial Use Standard Criteria for Accident Monitoring Instrumentation for Nuclear Power Generating Stations
IEEE Std 835-1994 IEEE Standard power cable ampacity tables

GSO

OS GSO IEC 62137-1-1:2015 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
GSO IEC 62137-1-1:2015 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test
GSO ASTM D882:2014 Standard Test Method for Tensile Properties of Thin Plastic Sheeting
BH GSO ASTM D3273:2022 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
GSO ASTM D4684:2010 Standard Test Method for Determination of Yield Stress and Apparent Viscosity of Engine Oils at Low Temperature
GSO ASTM D3273:2021 Standard Test Method for Resistance to Growth of Mold on the Surface of Interior Coatings in an Environmental Chamber
OS GSO 1466:2002 Metals hardness values tabels: test of tensile and hardness
GSO ASTM D2290:2024 Standard Test Method for Apparent Hoop Tensile Strength of Plastic or Reinforced Plastic Pipe

German Institute for Standardization

DIN EN 62137-1-1:2008-02 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (IEC 62137-1-1:2007); German version EN 62137-1-1:2007
DIN EN ISO 8596:2020-05 Ophthalmic optics - Visual acuity testing - Standard and clinical optotypes and their presentation (ISO 8596:2017 + Amd.1:2019); German version EN ISO 8596:2018 + A1:2020
DIN 53292:1982 Testing of sandwiches; Tensile test perpendicular to the faces
DIN 15112:1979-05 Spring pulls; safety requirements, testing
DIN 53504:2017-03 Testing of rubber - Determination of tensile strength at break, tensile stress at yield, elongation at break and stress values in a tensile test
DIN EN ISO 4624:2022-09 Paints and varnishes - Pull-off test for adhesion (ISO/DIS 4624:2022); German and English version prEN ISO 4624:2022 / Note: Date of issue 2022-08-05*Intended as replacement for DIN EN ISO 4624 (2016-08).
DIN EN ISO 4624:2016-08 Paints and varnishes - Pull-off test for adhesion (ISO 4624:2016); German version EN ISO 4624:2016 / Note: To be replaced by DIN EN ISO 4624 (2022-09).

AASHTO - American Association of State Highway and Transportation Officials

TP10-1993 Standard Test Method for Thermal Stress Restrained Specimen Tensile Strength (2000 Edition)
T 273-1986 Standard Method of Test for Soil Suction
T273-1986 Standard Method of Test for Soil Suction
T 253-2002 Standard Method of Test for Coated Dowel Bars

ES-AENOR

UNE 68-005 Pt.1-1986 Test method for standardized determination of power and fuel consumption of agricultural tractor power take-offs

International Electrotechnical Commission (IEC)

IEC 62880-1:2017 Semiconductor devices - Stress migration test standard - Part 1: Copper stress migration test standard

Japanese Industrial Standards Committee (JISC)

JIS B 7721:2002 Verification and calibration of the force measuring system of the tension/compression testing machines

CZ-CSN

CSN 79 3825-1962 Testing of leather. Resistance to the tearing out of wooden peg
CSN 73 6174-1994 Determination of elastic modulus and concrete testing. Pull test

SE-SIS

SIS 14-1992 Metrology and testing. List of Swedish standards

Indonesia Standards

SNI 04-3874-1995 Testing equipment of electric energy meters
SNI 03-3399-1994 Test method for tensile strength of wood in the laboratories
SNI 02-1213-2003 Agricultural tractors turn wrist plough, Standard form and test method

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 835 INTRO-1994 Standard Power Cable Ampacity Tables

Defense Logistics Agency

DLA A-A-59400 A VALID NOTICE 2-2012 Tester, Spring Resiliency (Push/Pull Force Gauge)

European Committee for Standardization (CEN)

EN 10002-2:1991 Metallic materials; tensile testing; part 2: verification of the force measuring system of the tensile testing machines

Lithuanian Standards Office

LST EN 62137-1-1-2008 Surface mounting technology - Environmental and endurance test methods for surface mount solder joint - Part 1-1: Pull strength test (IEC 62137-1-1:2007)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 41.3-1989 Standard Method for Pressure Measurement (Errata:January 5@1998)

Underwriters Laboratories (UL)

UL 2735C-2022 STANDARD FOR SAFETY Electric Utility Meters for Canada

CH-SNV

SNV 95825-1950 Plastic (organic plastic) material testing. Pull test