German standard geometric tolerances

German standard geometric tolerances, Total:300 items.

The international standard classification for "German standard geometric tolerances" includes: Mechanical engineering drawings , Limits and fits , Furniture , Rubber and plastics products in general .

The Chinese standard classification for "German standard geometric tolerances" includes: Basic standards and general methods , Furniture in general , Rubber seal , Casting .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 17852-2018 Geometrical product specifications(GPS)—Geometrical tolerancing—Profile tolerancing
GB/T 13319-2020 Geometrical product specifications(GPS)—Geometrical tolerancing—Pattern and combined geometrical specification
GB/T 1182-2018 Geometrical product specifications(GPS)—Geometrical tolerancing—Tolerances of form,orientation,location and run-out

未注明发布机构

DIN EN ISO 1101 E:2005-06 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)
DIN EN ISO 1101:2017E Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
DIN 2769 E:2022-10 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN EN ISO 1101 E:2014-10 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)
DIN EN ISO 5459 E:2016-05 Geometric Product Specification (GPS) Geometric Tolerance Data and Data System (Draft)
DIN EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
DIN EN ISO 5459 E:2017-12 Geometric Product Specification (GPS) Geometric Tolerance Data and Data System (Draft)
DIN EN ISO 1101 E:2015-07 Product Geometric Specification (GPS) Geometric Tolerances Shape, Orientation, Positioning and Deflection Tolerances (Draft)
DIN EN ISO 1660 E:2013-10 Geometric Product Specification (GPS) Geometric Tolerances Contour Tolerances (Draft)
DIN 2769 E:2020-09 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication

Professional Standard - Light Industry

QB/T 4453-2013 Wooden furniture—Geometrical tolerancing

Taiwan Provincial Standard of the People's Republic of China

CNS 10326-1993 Geometry Tolerance of Flange Type Rotating Electric Machines
CNS 3.14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)
CNS 3.4-1999 Engineering drawings - Geometrical toleranicing
CNS 3-13-1994 Engineering Drawing (Geometrical Tolerancing - Positional Tolerancing)
CNS 3-4-1999 Engineering drawings - Geometrical toleranicing
CNS 3-12-1994 Engineering Drawing (Geometrical Tolerancing - Maximum Material Principle)
CNS 3.13-1994 Engineering Drawing (Geometrical Tolerancing - Positional Tolerancing)
CNS 3-14-1994 Engineering Drawing (Geometrical Tolerancing - Datums and Datum - Systems)

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 17851-2010 Geometrical Product Specifications(GPS)—Geometrical tolerancing—Datums and datum system
GB/T 1182-2008 Geometrical Product Specifications(GPS) - Geometrical tolerancing - Tolerances of form orientation location and run-out
GB/T 17851-2022 Geometrical product specifications (GPS)—Geometrical tolerancing—Datums and datum systems
GB/T 3672.2-2002 Rubber--Tolerances of products--Part 2:geometrical tolerances
GB/T 4249-2009 Geometrical product specifications(GPS) - Tolerancing principle
GB/T 1958-2017 Geometrical Product Specifications(GPS)―Geometrical tolerance―Verification
GB/T 6414-2017 Castings - Dimensional Tolerances and Geometrical Tolerances and Machining Allowances
GB/T 13319-2003 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing

Professional Standard - Automobile

QC/T 714-2023 Geometrical tolerance for sheet metal of auto body

European Committee for Standardization (CEN)

EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
EN ISO 5458:1998 Geometrical Product Specifications (GPS) - Geometrical Tolerancing - Positional Tolerancing ISO 5458:1998
EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
EN ISO 1101:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and runout
EN 22768-2:1993 General tolerances; part 2: geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form@ orientation@ location and run-out
EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2023
EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones

German Institute for Standardization

DIN EN ISO 5458:1999 Geometrical product specification (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998); German version EN ISO 5458:1998
DIN EN ISO 1660:2017-09 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017); German version EN ISO 1660:2017
DIN EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO 1660:2017); German version EN ISO 1660:2017
DIN ISO 5459:1982 Technical drawings; geometrical tolerancing; datums and datum-systems for geometrical tolerances
DIN EN ISO 5458:2018-11 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018); German version EN ISO 5458:2018
DIN EN ISO 1101:2017-09 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
DIN EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017); German version EN ISO 1101:2017
DIN EN ISO 1101:2006 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); English version of DIN EN ISO 1101:2006-02
DIN EN ISO 1101:2008 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004); German version EN ISO 1101:2005
DIN EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
DIN EN ISO 8062-3:2008 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007); English version of DIN EN ISO 8062-3:2008
DIN 2769:2023 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN EN ISO 1101:2014 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2012 + Cor. 1:2013); German version EN ISO 1101:2013
DIN EN ISO 22081:2022-10 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021); German version EN ISO 22081:2021
DIN 2769:2023-04 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN EN ISO 22081:2019 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical and dimensional specifications (ISO/DIS 22081:2019); German and English version prEN ISO 22081:2019
DIN 2769:2021 Geometrical product specification (GPS) - General tolerances - Tabulated values for geometrical tolerances and tolerances for linear and angular sizes without individual tolerance indication
DIN EN ISO 5459:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011); German version EN ISO 5459:2011
DIN EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ？ tolerances for indicated dimensions (ISO 8062-3...
DIN EN ISO 8062-3:2019 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-3:2019); German and English version prEN ISO 8
DIN EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2006); English version of DIN EN ISO 8062-3:2007

British Standards Institution (BSI)

BS EN ISO 1660:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Profile tolerancing
BS EN ISO 5458:1999 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
BS ISO 3302-2:2022 Rubber. Tolerances for products - Geometrical tolerances
BS EN ISO 1101:2017 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS ISO 5459:2000 Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances
BS EN 22768-2:1993 General tolerances - Geometrical tolerances for features without individual tolerance indications
BS EN ISO 5458:2018 Geometrical product specifications (GPS). Geometrical tolerancing. Pattern and combined geometrical specification
BS EN ISO 1101:2013 Geometrical product specifications (GPS). Geometrical tolerancing. Tolerances of form, orientation, location and run-out
BS ISO 1101:2005 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
PD ISO/TS 17863:2013 Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
BS EN ISO 1101:2005 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
19/30369878 DC BS EN ISO 22081. Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical and dimensional specifications
BS EN ISO 8062-3:2023 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts. Rules
BS EN ISO 5459:2011 Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
BS EN ISO 3040:2012 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
BS EN ISO 22081:2021 Geometrical product specifications (GPS). Geometrical tolerancing. General geometrical specifications and general size specifications
16/30314605 DC BS EN ISO 5459. Geometrical product specifications (GPS). Geometrical tolerancing. Datums and datum systems
BS EN ISO 8062-3:2007 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts. General dimensional and geometrical tolerances and machining allowances for castings
ISO 8062-4:2023 Geometrical product specifications. Dimensional and geometrical tolerances for moulded parts - Rules and general tolerances for castings using profile tolerancing in a general datum system
BS EN ISO 3040:2016 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones

International Organization for Standardization (ISO)

ISO 5458:1998 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing
ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
ISO 5458:1987 Technical drawings; Geometrical tolerancing; Positional tolerancing
ISO 5459:1981 Technical drawings; Geometrical tolerancing; Datums and datum-systems for geometrical tolerances
ISO 3302-2:1998 Rubber - Tolerances for products - Part 2: Geometrical tolerances
ISO 3302-2:2008 Rubber - Tolerances for products - Part 2: Geometrical tolerances
ISO 3302-2:2022 Rubber — Tolerances for products — Part 2: Geometrical tolerances
ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 1101:2004 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO 1101:2012 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
ISO/DIS 5459:2023 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems
ISO 2768-2:1989 General tolerances; part 2: geometrical tolerances for features without individual tolerance indications
ISO/TS 17863:2013 Geometrical product specification (GPS)-Geometrical tolerancing of moveable assemblies
ISO 1101:2012/Cor 1:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out; Technical Corrigendum 1
ISO 8062-3:2007 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
ISO 8062-3:2023 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions

Danish Standards Foundation

DS/EN ISO 5458:1999 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing
DS/ISO 5458:1991 Technical drawings. Geometrical tolerancing. Positional tolerancing
DS/ISO 5459:1982 Technical drawings. Geometrical tolerancing. Datums and datum systems for geometrical tolerances
DS/EN ISO 1101:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
DS/ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications
DS/EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
DS/ISO 2768-2:1990 Technical drawing. General tolerances. part 2: Geometrical tolerances for features without individual tolerance indications
DS/EN ISO 8062-3/AC:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DS/EN ISO 3040:2012 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
DS/EN ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications (ISO 22081:2021)
DS/EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings
DS/EN 22768-2:1993 General tolerances. Part 2: Geometrical tolerances for features without individual tolerance indications
DS/ISO 2768-2:1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications
DS-håndbog 114.6:2006 Geometrical product specifications (GPS) - Part 6: Complementary GPS standards - Processspecific tolerance standards and machine element geometry standards

Association Francaise de Normalisation

NF EN ISO 1660:2017 Spécification géométrique des produits (GPS) - Tolérancement géométrique - Tolérancement des profils
NF E04-556*NF EN ISO 1660:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing
NF E04-559:1999 Geometrical product specifications (GPS). Geometrical tolerancing. Positional tolerancing.
NF E04-559*NF EN ISO 5458:2018 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification
NF EN ISO 1101:2017 Geometrical product specification (GPS) - Geometrical tolerance - Shape, orientation, position and runout tolerance
NF E04-552*NF EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF EN ISO 5458:2018 Geometric Product Specification (GPS) - Geometric Tolerancing - Geometric Specification of Groups of Elements and Combined Geometric Specification
NF E04-552:2013 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out
NF T47-001-2*NF ISO 3302-2:2014 Rubber - Tolerances for products - Part 2 : geometrical tolerances
NF E04-552:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out.
XP ISO/TS 17863:2013 Spécification géométrique des produits (GPS) - Tolérancement géométrique des assemblages mobiles
XP E04-553*XP ISO/TS 17863:2013 Geometrical product specification (GPS) - Geometrical tolerancing of moveable assemblies
NF E04-574:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications
NF EN ISO 22081:2021 Geometric Product Specification (GPS) - Geometric Tolerancing - General Geometric Specifications and General Size Specifications
NF E04-557*NF EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones
NF EN ISO 3040:2016 Spécification géométrique des produits (GPS) - Cotation et tolérancement - Cônes
NF E04-554*NF EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum-systems
NF E02-350-2:1993 General tolerances. Part 2 : geometrical tolerances for features without individual tolerance indications.
NF EN ISO 5459:2011 Geometrical Product Specification (GPS) - Geometrical Tolerance - Specified References and Specified Reference Systems
NF E86-040:1985 Not pressurized tanks. Geometrical and dimensional tolerances.
NF E04-554:1988 Technical drawings. Dimensioning and tolerancing. Datums and datum-systems for geometrical tolerances.
NF E02-351:1993 General tolerances. Geometric tolerances of components without special tolerance indications. NF EN22768-2 Application Guide
NF A00-510-3*NF EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3 : general dimensional and geometrical tolerances and machining allowances for castings.
NF EN ISO 2538-2:2014 Spécification géométrique des produits (GPS) - Coins - Partie 2 : cotation et tolérancement

KR-KS

KS A ISO 1660-2020 Geometrical product specifications(GPS) — Geometrical tolerancing —Profile tolerancing
KS B ISO 5458-2020 Geometrical Product Specifications(GPS) — Geometrical tolerancing —Pattern and combined geometrical specification
KS A ISO 1101-2021 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
KS M ISO 3302-2-2018(2023) Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS M ISO 3302-2-2018 Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS A ISO 1101-2016 Geometrical product specifications(GPS) — Geometricaltolerancing — Tolerances of form, orientation, location and run-out
KS B ISO 2692-1-2004 Technical drawings－Geometrical tolerancing－Maximum material principle

Korean Agency for Technology and Standards (KATS)

KS A ISO 1660:2020 Geometrical product specifications(GPS) — Geometrical tolerancing —Profile tolerancing
KS B ISO 5458:2014 Geometrical Product Specifications(GPS) — Geometrical tolerancing — Positional tolerancing
KS B ISO 5458:2008 Geometrical Product Specifications(GPS)-Geometrical tolerancing-Positional tolerancing
KS B 0608-2007(2012) Indications of geometrical tolerances on drawings
KS B 0608-2007 Indications of geometrical tolerances on drawings
KS B ISO 5459:2004 Technical drawings-Geometrical tolerancing-Datums and datum-systems for geometrical tolerances
KS B 0148-2006 TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
KS B 0148-1992(2002) TECHNICAL DRAWINGS - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING
KS B ISO 5459:2014 Geometrical product specifications(GPS) — Geometrical tolerancing — Datums and datum systems
KS B ISO 2768-2:2014 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
KS B ISO 5458:2020 Geometrical Product Specifications(GPS) — Geometrical tolerancing —Pattern and combined geometrical specification
KS B 0243-2007 Datums and datum-systems for geometrical tolerances
KS M ISO 3302-2-2023 Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS A ISO 1101:2016 Geometrical product specifications(GPS) — Geometricaltolerancing — Tolerances of form, orientation, location and run-out
KS A ISO 1101:2021 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
KS B ISO 2768-2:2002 General tolerances-Part 2:Geometrical tolerances for features without individual tolerance indications
KS M ISO 3302-2:2018 Rubber — Tolerances for products — Part 2: Geometrical tolerances
KS B 0146-2006 GENERAL TOLERANCES-PART2:GEOMETRICAL TOLERANCES FOR FEATURES WITHOUT INDIVIDUAL TOLERANCE INDICATIONS
KS M ISO 3302-2:2008 Rubber－Tolerances for products－Part 2：Geometrical tolerances
KS B ISO 5459-2019 Geometrical product specifications(GPS) — Geometrical tolerancing — Datums and datum systems
KS B ISO 5459-2014(2019) Geometrical product specifications(GPS) — Geometrical tolerancing — Datums and datum systems
KS B ISO 2768-2-2014(2019) General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
KS B 0243-2007(2012) Datums and datum-systems for geometrical tolerances
KS A ISO 1101:2002 Geometrical product specifications(GPS)-Geometrical tolerancing- Tolerancing of form, orientation, location and run-out
KS B ISO 2768-2-2019 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications
KS A ISO 1101:2014 Geometrical product specifications(GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out

SE-SIS

SIS SS-ISO 5459:1984 Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances
SIS SS-ISO 2768-2:1992 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications

Japanese Industrial Standards Committee (JISC)

JIS B 0021:1984 Indications of geometrical tolerances on drawings
JIS B 0025:1991 Technical drawings -- Geometrical tolerancing -- positional tolerancing
JIS B 0025:1998 Technical drawings -- Geometrical tolerancing -- Positional tolerancing
JIS B 0021:1998 Geometrical product specifications (GPS) -- Geometrical tolerancing -- Tolerancing of form, orientation, location and run-out
JIS B 0419:1991 General tolerances -- Part 2: Geometrical tolerances for features without individual tolerance indications
JIS B 0022:1984 Datums and datum-systems for geometrical tolerances

SCC

DANSK DS/EN ISO 1660:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Profile tolerancing (ISO 1660:2017)
NS-EN ISO 5458:1998 Geometrical product specifications (GPS) — Geometrical tolerancing — Positional tolerancing (ISO 5458:1998)
NS-EN ISO 1660:2017 Geometrical product specifications (GPS) — Geometrical tolerancing — Profile tolerancing (ISO 1660:2017)
BS PD 7304:1982 Geometrical tolerancing. An introduction
BS ISO 5459:1981 Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances
NS 1428:1982 Technical drawings — Geometrical tolerancing — Datums and datum-systems for geometrical tolerances
DIN EN ISO 1660 E:2013 Draft Document - Geometrical product specifications (GPS) - Geometrical tolerancing - Profile tolerancing (ISO/DIS 1660:2013); German version prEN ISO 1660:2013
BS PD 7305:1983 Exercises in geometrical tolerancing for students
DIN EN ISO 5458 E:2016 Draft Document - Geometrical product specifications (GPS) - Geometrical tolerancing - Positional and pattern tolerancing (ISO/DIS 5458.2:2016); German and English version prEN ISO 5458:2016
BS PP 7304:1991 Geometrical tolerancing. An introduction
BS PD ISO/TS 17863:2013 Geometrical product specification (GPS). Geometrical tolerancing of moveable assemblies
DANSK DS/ISO/TS 17863:2014 Geometrical product specification (GPS) – Geometrical tolerancing of moveable assemblies
NS-EN ISO 1101:2005 Geometrical Product Specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out (ISO 1101:2004)
NS-EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017)
CIE 176:2006 Geometric toleraces for colour measurements
DANSK DS/EN ISO 1101:2017 Geometrical product specifications (GPS) – Geometrical tolerancing – Tolerances of form, orientation, location and run-out (ISO 1101:2017)
UNE-EN ISO 1101:2006 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)
DANSK DS/ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications
NS-EN ISO 5458:2018 Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification (ISO 5458:2018)
DANSK DS/EN ISO 5458:2018 Geometrical product specifications (GPS) – Geometrical tolerancing – Pattern and combined geometrical specification (ISO 5458:2018)
AENOR UNE-EN ISO 5458:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
NS-ISO 5458:1998 Technical drawings — Geometrical tolerancing — Positional tolerancing (ISO 5458:1987)
ISO 1101:2012/DAmd 1 Geometrical product specifications (GPS) — Geometrical tolerance — Tolerance of shape, orientation, position and runout — Amendment 1
DANSK DS/EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems
DIN EN ISO 22081 E:2019 Draft Document - Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical and dimensional specifications (ISO/DIS 22081:2019); German and English version prEN ISO 22081:2019
DANSK DS/EN ISO 22081:2021 Geometrical product specifications (GPS) – Geometrical tolerancing – General geometrical specifications and general size specifications (ISO 22081:2021)
NS-EN 22768-2:1993 General tolerances — Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)
DANSK DS/EN ISO 8062-3/AC:2009 Geometrical Product Specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings
BS PD CEN ISO/TS 8062-2:2013 Geometrical Product Specifications (GPS). Dimensional and geometrical tolerances for moulded parts-Rules
NS 3461:2005 Geometrical tolerances in building - Basic concepts
NS-EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
BS 308-3:1990 Engineering drawing practice-Recommendations for geometrical tolerancing
DANSK DS/EN ISO 3040:2016 Geometrical product specifications (GPS) – Dimensioning and tolerancing – Cones
DANSK DS/EN ISO 8062-3:2023 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2...
DANSK DS/ISO 8062-3:2023 Geometrical product specifications (GPS) – Dimensional and geometrical tolerances for moulded parts – Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions
NS-EN ISO 1101:2013 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out (ISO 1101:2012, including Cor 1:2013)
DIN EN ISO 1101 E:2015 Draft Document - Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO/DIS 1101.3:2015); German and English version prEN ISO 1101:2015
NS-EN ISO 5459:2011 Geometrical product specifications (GPS) — Geometrical tolerancing — Datums and datum systems (ISO 5459:2011)
DIN EN ISO 8062-3 E:2019 Draft Document - Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO/DIS 8062-3:2019); German and Englis...
AS 1100.10:1974 Drawing practice, Part 10: Geometry tolerancing
AENOR UNE-EN ISO 5459:2012 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
NS-EN ISO 8062-3:2023 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:2...
DANSK DS/ISO 2768-2:1993 General tolerances – Part 2: Geometrical tolerances for features without individual tolerance indications
DANSK DS/EN 22768-2:1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications
ASME Y14.5.2-1995 Certification of Geometric Dimensioning and Tolerancing Professionals
NS-EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
BS ISO 3040:2009 Geometrical product specifications (GPS). Dimensioning and tolerancing. Cones
NS-ISO 2692:1988 Technical drawings — Geometrical tolerancing — Maximum material principle
AENOR UNE-EN ISO 8062-3:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for molded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)
NS-EN ISO 3040:2016 Geometrical product specifications (GPS) — Dimensioning and tolerancing — Cones (ISO 3040:2016)

ZA-SANS

SANS 10111-2-4:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Positional tolerancing
SANS 3302-2:2003 Rubber - Tolerances for products Part 2: Geometrical tolerances
SANS 10111-2-2:1993 Engineering drawing Part 2: Geometrical tolerancing Section 2: Datums and datum-systems for geometrical tolerances
SANS 10111-2-2,2-3+2-5:1993 Engineering drawing Part 2:Geometrical tolerancing

VN-TCVN

TCVN 7295-2003 Geometrical product specification (GPS).Geometrical tolerancing.Positional tolerancing
TCVN 7294-2-2003 General tolerances.Part 2: Geometrical tolerances for features without individual tolerance indications
TCVN 2263-2-2007 General tolerances.Part2:Geometrical tolerances for features without individual tolerance indications
TCVN 5906-2007 Geometrical Product Specifications (GPS).Geometrical tolerancing.Tolerances of form, orientation, location and run-out

CZ-CSN

CSN 01 4406-1981 Geometricul tolorances not indicated on drawings
CSN ISO 5459:1994 Technical drawings-Geometrical tolerancing-Datums and datum-system for geometrical tolerances
CSN ISO 2768-2:1994 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications
CSN 01 4401-1981 Geometrical tolerances. Basic terms and definitions
CSN 35 0049-1977 Rotating electrical machines. Tolerances of mounting dimensions and of geometrical form of electrical rotating machines

PL-PKN

PN M02168-02-1991 General tolerances Geometrical tolerances for features without individual tolerance indications
PN M01122-1993 Technical drawings. Geometrical tolerancing. Positional tolerancing
PN-EN ISO 22081-2021-07 E Geometrical product specifications (GPS) -- Geometrical tolerancing -- General geometrical specifications and general size specifications (ISO 22081:2021)

AENOR

UNE-EN ISO 5458:1999 GEOMETRICAL PRODUCT SPECIFICATIONS (GPS) - GEOMETRICAL TOLERANCING - POSITIONAL TOLERANCING (ISO 5458:1998).
UNE 1128:1995 TECHNICAL DRAWINGS. GEOMETRICAL TOLERANCING. DATUMS AND DATUM-SYSTEMS FOR GEOMETRICAL TOLERANCES.
UNE-EN ISO 5459:2012 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
UNE-EN ISO 8062-3:2009 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)

Lithuanian Standards Office

LST EN ISO 5458:2001 Geometrical product specifications (GPS) - Geometrical tolerancing - Positional tolerancing (ISO 5458:1998)
LST EN ISO 1101:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2004)
LST EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
LST EN ISO 5459:2011 Geometrical product specifications (GPS) - Geometrical tolerancing - Datums and datum systems (ISO 5459:2011)
LST EN ISO 8062-3:2007 Geometrical Product Specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings (ISO 8062-3:2007)

RO-ASRO

STAS 7384-1985 GEOMETR1CAL TOLERANCING Definitions
STAS SR EN 22768-2-1995 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications
STAS 7385/1-1985 Technical drawings GEOMETRICAI. TOLERANCES Tolerances of form, orientation, location and run-out

AT-ON

ONORM ISO 5459:1985 Technical drawings; geometrical tolerancing; datums and datum-systems for geometrical tolerances
ONORM ISO 2768 Teil.2:1990 General tolerances; geometrical tolerances for features without individual tolerance indications
ONORM ISO 5458:1989 Technical drawings; geometrical tolerancing; positional tolerancing
OENORM EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
ONORM EN 22768-2-1993 General tolerances - Part 2: Geometrical tolerances for features without individual tolerance indications (ISO 2768-2:1989)

GSO

BH GSO ISO 5459:2016 Technical drawings -- Geometrical tolerancing -- Datums and datum-systems for geometrical tolerances
BH GSO ISO 1101:2022 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
GSO ISO 5458:2021 Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification
GSO ISO 1101:2021 Geometrical product specifications (GPS) — Geometrical tolerancing — Tolerances of form, orientation, location and run-out
BH GSO ISO 5458:2022 Geometrical product specifications (GPS) — Geometrical tolerancing — Pattern and combined geometrical specification
OS GSO ISO 3302-2:2015 Rubber -- Tolerances for products -- Part 2: Geometrical tolerances
GSO ISO 3302-2:2015 Rubber -- Tolerances for products -- Part 2: Geometrical tolerances
BH GSO ISO 3302-2:2016 Rubber -- Tolerances for products -- Part 2: Geometrical tolerances
BH GSO ISO 22081:2023 Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications
GSO ISO 22081:2022 Geometrical product specifications (GPS) — Geometrical tolerancing — General geometrical specifications and general size specifications
BH GSO ISO 8062-3:2022 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings
BH GSO ISO 3040:2017 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
OS GSO ISO 3040:2015 Geometrical product specifications (GPS) -- Dimensioning and tolerancing -- Cones
GSO ISO 8062-3:2021 Geometrical product specifications (GPS) — Dimensional and geometrical tolerances for moulded parts — Part 3: General dimensional and geometrical tolerances and machining allowances for castings

NO-SN

NS 1428-1982 Technical drawings - Geometrical tolerancing - Datums and datum-systems for geometrical tolerances
NS 3461-2005 Geometrical tolerances in building - Basic concepts

ISUZU - Isuzu Motors Ltd.

ISA-K-012C-2012 Geometrical toleranceing (Japanese Version)

CEN - European Committee for Standardization

EN ISO 1101:2005 Geometrical Product Specifications (GPS) - Geometrical tolerancing - Tolerances of form@ orientation@ location and run-out

ES-UNE

UNE-EN ISO 5458:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - Pattern and combined geometrical specification (ISO 5458:2018)
UNE-EN ISO 1101:2017 Geometrical product specifications (GPS) - Geometrical tolerancing - Tolerances of form, orientation, location and run-out (ISO 1101:2017) (Endorsed by Asociación Española de Normalización in April of 2017.)
UNE-EN ISO 22081:2023 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
UNE-EN ISO 3040:2016 Geometrical product specifications (GPS) - Dimensioning and tolerancing - Cones (ISO 3040:2016)
UNE-EN ISO 8062-3:2023 Geometrical product specifications (GPS) - Dimensional and geometrical tolerances for moulded parts - Part 3: General dimensional and geometrical tolerances and machining allowances for castings using ± tolerances for indicated dimensions (ISO 8062-3:...

American National Standards Institute （ANSI)

BS ISO 8062-4:2023 Geometrical product specifications (GPS). Dimensional and geometrical tolerances for moulded parts Rules and general tolerances for castings using profile tolerancing in a general datum system (British Standard)

YU-JUS

JUS ISO 5459:1992 Technical drawings. Geometrical tolerancing. Datums and datum-systems for geometrical tolerances

International Commission on Illumination (CIE)

CIE 176-2006 GEOMETRIC TOLERANCES FOR COLOUR MEASUREMENTS

IT-UNI

UNI EN ISO 22081:2021 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications

DIN

DIN EN ISO 22081:2022 Geometrical product specifications (GPS) - Geometrical tolerancing - General geometrical specifications and general size specifications (ISO 22081:2021)
DIN ISO 3302-2:1999 Rubber - Tolerances for products - Part 2: Geometrical tolerances (ISO 3302-2:1998)

Society of Automotive Engineers (SAE)

SAE J2370-2003 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2021 Geometric Dimensions and Tolerancing for Curved Hose
SAE J2370-2009 Geometric Dimensions and Tolerancing for Curved Hose

SAE - SAE International

SAE J2370-2001 Geometric Dimensions and Tolerancing for Curved Hose

RU-GOST R

GOST R 53442-2015 Basic norms of interchangeability. Geometrical product specifications. Geometrical tolerancing. Tolerances of form, orientation, location and run-out

IN-BIS

IS 8000 Pt.3-1992 Technical Drawing - Geometric Tolerances Part 3 Dimensions and Tolerances of Contours

Others: