Motor rotor voltage test

Motor rotor voltage test, Total:125 items.

The international standard classification for "Motor rotor voltage test" includes: Motors , Rotating machinery in general , Electrical engineering in general , Components for rotating machines , Electrical accessories in general , Moulding equipment , Aerospace electric equipment and systems .

The Chinese standard classification for "Motor rotor voltage test" includes: Special machine , Electric rotating machinery in general , Machine tool in general , Agricultural products and feed processing machinery , Casting equipment , Electrical system and equipment .

Group Standards of the People's Republic of China

T/JSQA 148-2022 Stator and rotor stamping and core processing for motor
T/ZJJXH 0004-2023 Technical requirements for rotor dynamic balance test of three-phase asynchronous motors
T/CEEIA 510-2021 A.C. voltage withstand test guide of rotor winding for adjustable speed pumped motor-generators
T/CPARK 25-2022 Motor rotor dynamic balance test technical specification
T/CCMA 0034-2015 The durability test of the rotary motor for hydraulic excavators in laboratory
T/CIET 16-2023 Automatic press-fitting equipment for motor rotor bearings
T/CEEIA 252-2016 Thermal cycle testing method of stator bars for large rotating machines
T/CSEE 0041-2017 Guidelines for Rotor Repetitive Pulse (RSO) Test of Secrete Pole Synchronous Generators
T/CMES 34009-2022 Dynamic balance test method for remanufactured axial flow compressor rotor assembly

Taiwan Provincial Standard of the People's Republic of China

CNS 3626-1985 Voltage Endurance Testing Method for Electronic Components

机械工业部

JB 6204-1992 Specifications for stator insulation withstand voltage test of large high-voltage AC motors

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22671-2008 Test procedures for with external rotor motors
GB/T 22720.1-2008 Rotating electrical machines - Qualification and type tests for - Type Ⅰelectrical insulation systems used in rotating electrical machines fed from voltage converters
GB/T 26676-2011 Electrical, electronic and programmable electronic control systems of machine tools - Specification of withstanding voltage test
GB/T 22715-2016 Impulse voltage withstand levels of form-wound stator coils for rotating a. c.machines
GB/Z 22720.2-2013 Rotating electrical machines—Qualification and acceptance tests for partial discharge resistant electrical insulation systems(Type Ⅱ)used in rotating electrical machines fed from voltage converters
GB/T 17948.4-2016 Rotating electrical machines―Functional evaluation of insulation systems―Test procedures for form-wound windings―Evaluation by electrical endurance
GB/T 24344-2009 Electrical equipment of industrial machines - High-voltage test specifications

Professional Standard - Machinery

JB/T 8353.2-1996 Specifications for full vertical motor rotor die casting machine
JB/T 8353.1-1996 Full vertical motor rotor die casting machine parameters
JB/T 9810.2-1999 Rotor-vane type tea rolling-cutting machines. Test methods
JB/T 8353.1-2006 Entirely vertical motor rotor die casting machines - Part 1 : Basic parameters
JB/T 8378-1996 Full vertical motor rotor die casting machine precision
JB/T 8353.3-2006 Entirely vertical motor die casting machines - Part 3 : Testing of the accuracies
JB/T 6204-2002 Specifications for Withstanding Voltage Test Oil Stator Coil and

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 22720.2-2019 Rotating electrical machines—Qualification tests for the partial discharge resistant electrical insulation systems(Type Ⅱ) used in rotating electrical machines fed from voltage converters

Military Standard of the People's Republic of China-General Armament Department

GJB 360.16-1987 Test methods for electronic and electrical components Rotation life test
GJB 360.6-1987 Test methods for electronic and electrical components Moisture resistance test
GJB 360.27-1987 Test methods for electronic and electrical components Dielectric withstand voltage test
GJB 7053-2010 Approval test regulations for rotary engines of UAV

工业和信息化部

QB/T 5425-2019 Rotor compressor for dehumidifiers
JB/T 13370-2018 Rotor heat run test guide for air cooled large cylindrical synchronous machines
JB/T 8353.3-2021 Entirely vertical motor die casting machines-Part 3:Testing of the accuracies
HG/T 3122-2022 Drum testing machine for tyre high speed and endurance performance
JB/T 8353.1-2021 Entirely vertical motor rotor die casting machines-Part 1:Basic parameters

Professional Standard - Electricity

DL/T 294.3-2019 Specificanon for equipment of de-excitation and overvoltage protection for generators Part 3: Rotor overvoltage protection

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35856-2018 Methods of insulation resistance test and resistant high voltage test for aircraft electrical equipment

ZA-SANS

SANS 60034-15:2009 Rotating electrical machines Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
SANS 60034-15:1995 Rotating electrical machines Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils

Korean Agency for Technology and Standards (KATS)

KS C IEC 60695-10-2:2001 Fire hazard testing－Part 10：Guidance and test methods for the minimization of the effects of abnormal heat on electrotechnical products involved in fires－Section 2：Method for testing products made from non-metallic materials for resistance to heat using t
KS C IEC 60034-15:2019 Rotating electrical machines — Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
KS C IEC 60034-15:2002 Rotating electrical machines Part 15：Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
KS C IEC 60512-4-1:2005 Connectors for electronic equipment-Tests and measurements-Part 4-1:Voltage stress tests-Test 4a:Voltage proof
KS C IEC 60512-4-1:2014 Connectors for electronic equipment-Tests and measurements-Part 4-1:Voltage stress tests-Test 4a:Voltage proof
KS C IEC 60512-4-1-2005(2010) Connectors for electronic equipment－Tests and measurements－Part 4－1：Voltage stress tests－Test 4a：Voltage proof
KS C 6021-1982 Endurance(mechanical) testing method for electronic components
KS C 6021-1977 Endurance(mechanical) testing method for electronic components
KS C IEC 60068-2-39:2002 Environmental testing－Part 2：Tests－Test Z/AMD：Combined sequential cold, low air pressure and damp heat test
KS C IEC 60512-4-3-2002(2013) Connectors for electronic equipment－Tests and measurements－Part 4－3：Voltage stress tests－Test 4c：Voltage proof ofpre－insulated crimp barrels
KS C IEC 60512-4-3-2014 Connectors for electronic equipment－Tests and measurements－Part 4－3：Voltage stress tests－Test 4c：Voltage proof ofpre－insulated crimp barrels
KS C 6005-1992 Test methods for heat-resisting of electronic components

SCC

BS EN 60034-15:1996 Rotating electrical machines-Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
BS 4999-115:1992 General requirements for rotating electrical machines-Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
DANSK DS/EN 60034-15:2009 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
CEI EN 60034-15:2009 Rotating electrical machines Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
UNE-EN 60034-15:1997 ROTATING ELECTRICAL MACHINES. PART 15: IMPULSE VOLTAGE WITHSTAND LEVELS OF ROTATING A.C. MACHINES WITH FORM-WOUND STATOR COILS.
DANSK DS/EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof
06/30159940 DC BS EN 60034-15. Rotating electrical machines. Part 15. Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
AENOR UNE 20115-3:1989 LOW VOLTAGE MOTOR STARTERS. RESISTANCE ROTORIC STARTERS
DIN IEC 60034-15 E:2007 Draft Document - Rotating electrical machines - Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils (IEC 2/1418/CD:2006)
DIN 42962-2 E:2005 Draft Document - Arrangement of terminals for rotating electrical machines, rated voltage 11 kV
ASD-STAN PREN 3475-302:2004 Aerospace Series Cables, Electrical, Aircraft Use Test Methods Part 302: Voltage Proof Test
08/30165047 DC BS EN ISO 9906. Rotodynamic pumps. Hydraulic performance acceptance tests

SAE - SAE International

SAE ARP4162-1993 Balancing Machine Proving Rotors

GSO

BH GSO IEC 60034-15:2016 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
GSO IEC 60034-15:2015 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

AENOR

UNE-EN 60034-15:2010 Rotating electrical machines -- Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
UNE-EN 60512-4-1:2004 Connectors for electronic equipment - Tests and measurements -- Part 4-1: Voltage stress tests - Test 4a: Voltage proof

CZ-CSN

CSN IEC 34-15:1993 Rotating electrical machines. Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
CSN 35 4005 Cast.23-1985 Electromechanical components for electronic equipment. Test of mechanical durability
CSN 35 4055 Cast.9-1987 Electromechanical components for electronic equipment. Voltage stress tests
CSN 35 0018-1976 Climatic tests for electrical rotative machines
CSN 35 0018-1985 Climatic tests for electrical rotative machines
CSN ON 35 0102-1962 Electric rotating machinery. DC machine test

KR-KS

KS C IEC 60034-15-2019 Rotating electrical machines — Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

British Standards Institution (BSI)

BS EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Voltage stress tests - Test 4a - Voltage proof
BS EN 60034-15:2009 Rotating electrical machines - Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
23/30439065 DC BS EN IEC 60034-15. Rotating electrical machines - Part 15. Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
BS EN 60512-9-3:2006 Connectors for electronic equipment - Tests and measurements - Endurance tests - Test 9c - Mechanical operation (engaging/separating) with electrical load
23/30484685 DC Draft BS EN IEC 60034-15 Rotating electrical machines. Part 15. Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

VN-TCVN

TCVN 6627-15-2011 Rotating electrical machines.Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c.machines

Association Francaise de Normalisation

NF C51-350:1997 Rotating electrical machines. Part 15 : impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils.
NF C51-350*NF EN 60034-15:2009 Rotating electrical machines - Part 15 : impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines.
NF C93-400-4-1*NF EN 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1 : voltage stress tests - Test 4a : voltage proof
NF EN 60034-15:2009 Rotating electrical machines - Part 15: electric shock resistance levels of preformed stator coils of alternating current rotating machines

International Electrotechnical Commission (IEC)

IEC 60034-15:1995 Rotating electrical machines - Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils
IEC 60034-15:2009 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
IEC 60034-15:1990 Rotating electrical machines; part 15: impulse voltage withstand leves of rotating a.c. machines with form-wound stator coils
IEC 60512-4-1:2003 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests; Test 4a: Voltage proof
IEC 60512-17-4:2010 Connectors for electronic equipment - Tests and measurements - Part 17-4: Cable clamping tests - Test 17d: Cable clamp resistance to cable torsion
IEC TS 60034-18-41:2006 Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters
IEC 63211-3-5:2020 Durability test methods for electronic displays - Part 3-5: Mechanical tests - Surface durability
IEC TS 60034-18-42:2008 Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters

European Committee for Electrotechnical Standardization（CENELEC）

EN 60034-15:2009 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
HD 53.15 S1-1991 Rotating Electrical Machines Part 15: Impulse Voltage Withstand Levels of Rotating A.C. Machines with Form-Wound Stator Coils
EN 60512-4-1:2003 Connectors for electronic equipment Tests and measurements Part 4-1: Voltage stress tests Test 4a: Voltage proof
CLC/TS 60034-18-42-2011 Rotating electrical machines - Part 18-42: Qualification and acceptance tests for partial discharge resistant electrical insulation systems (Type II) used in rotating electrical machines fed from voltage converters

CENELEC - European Committee for Electrotechnical Standardization

EN 60034-15:1996 Rotating Electrical Machines - Part 15: Impulsive Voltage Withstand Levels of Rotating a.c. Machines with Form-Wound Stator Coils

NL-NEN

NEN 10034-14-1993 Rotating electrical machines. Mechanical vibration. Measurement, evaluation and limits of the vibration severity of certain machines (IEC 34-14:1982)
NEN 10 034-15-1992 Rotating motor. Impulse voltage withstand levels of rotating alternating current machines using form-wound stator coils (IEC 34-15:1990)

Danish Standards Foundation

DS/EN 60034-15:2009 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines

RU-GOST R

GOST IEC 60034-15-2014 Rotating electrical machines. Part 15. Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines
GOST 27279-1987 Electromechanical radio components. Method of testing cable clamp strength to cable rotation
GOST 28327-1989 Rotating electrical machines. Starting performances of single-speed three-phase cage induction motors for voltages to 660 V inclusive

German Institute for Standardization

DIN EN 60512-4-1:2004 Connectors for electronic equipment - Tests and measurements - Part 4-1: Voltage stress tests - Test 4a: Voltage proof (IEC 60512-4-1:2003); German version EN 60512-4-1:2003
DIN EN 60034-15:2010 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines (IEC 60034-15:2009); German version EN 60034-15:2009
DIN IEC/TS 60034-18-41:2007 Rotating electrical machines - Part 18-41: Qualification and type tests for Type I electrical insulation systems used in rotating electrical machines fed from voltage converters (IEC/TS 60034-18-41:2006)

Japanese Industrial Standards Committee (JISC)

JIS C 5402-4-1:2005 Connectors for electronic equipment -- Tests and measurements -- Part 4-1: Voltage stress tests -- Test 4a: Voltage proof
JIS C 5402-4-3:2005 Connectors for electronic equipment -- Tests and measurements -- Part 4-3: Voltage stress tests -- Test 4c: Voltage proof of pre-insulated crimp barrels

RO-ASRO

STAS 9904/9-1982 ELECTRICAL ROTATING MACHINES TEST METHODS Determinalion of the moment of inertia of rotors
STAS 7246/6-1974 ASYNCHRONOUS THREEPHASE MOTORS Test methods Locked — rotor test
STAS 9904/2-1981 ROTATING ELECTRICAL MACHINES Test methods Diclcctric tests
STAS 9904/7-1975 ELECTRICAL ROTATNG MACHINES Test methods Commutation test
STAS 11614-1981 HIGH VOLTAGE STATOR "WINDINGS OF ELECTRICAL ROTATING MACHINES Technical requirements and methods of test

Lithuanian Standards Office

LST EN 60034-15-2009 Rotating electrical machines - Part 15: Impulse voltage withstand levels of form-wound stator coils for rotating a.c. machines (IEC 60034-15:2009)

Indonesia Standards

SNI 04-0918.15-2001 Rotating electrical machines - Part 15: Impulse voltage with stand level of rotating a.c. machines with from-wound stator coils

DIN

DIN EN 60034-15:1996 Rotating electrical machines - Part 15: Impulse voltage withstand levels of rotating a.c. machines with form-wound stator coils (IEC 60034-15:1995); German version EN 60034-15:1996

PL-PKN

PN E04270-1972 Botating electrical direct current machin es Tests

United States Navy

NAVY MIL-P-24212 C (2)-1998 PRESSURE TRANSDUCER EQUIPMENT (ELECTRICAL)
NAVY MIL-P-24212 C NOTICE 1-1998 PRESSURE TRANSDUCER EQUIPMENT (ELECTRICAL)
NAVY MIL-P-24212 C-1991 PRESSURE TRANSDUCER EQUIPMENT (ELECTRICAL)

YU-JUS

JUS N.M1.912-1980 Components of household and similar electrical appliances. Locked rotor test of condenser fan motor
JUS N.R4.469-1978 Electromechanical components for electronic equipment. Test methods. Test 17d: Cable damp, resistance to cable torsion
JUS N.R4.467-1978 Electromechanical components for electronic equipment. Test methods. Test 17b: Cable clamp, resistance to cable rotation

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE C50.13-1989 Rotating Electrical Machinery - Cylindrical- Rotor Synchronous Generators

Others: