In which standard does the phase sequence test exist?

In which standard does the phase sequence test exist?, Total:45 items.

The international standard classification for "In which standard does the phase sequence test exist?" includes: Ambient atmospheres , Environmental protection .

The Chinese standard classification for "In which standard does the phase sequence test exist?" includes: Analysis methods for toxic substances in atmosphere , Environmental monitoring instrument and its complete equipment .

未注明发布机构

IEEE Std 252-2022 IEEE Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE Std 252-1995(R2007) IEEE Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap

Shanghai Provincial Standard of the People's Republic of China

DB31/T 1089-2018 Technical specification of online monitoring system of organic sulfur for ambient air quality

Professional Standard - Environmental Protection

HJ/T 356-2007 Technical specifications for validity of wastewater on-line monitoring data(on trial)

National Metrological Technical Specifications of the People's Republic of China

JJF(机械) 027-2008 Calibration Specifications for Relative Aperture Testers

Military Standard of the People's Republic of China-General Armament Department

GJB 5540-2006 General specification for test program sets of aviation automatic test system

Professional Standard - Electricity

DL/T 658-1998 Code for On-line Acceptance Test of Sequence Control System in Fossil Fuel Power Plant

GSO

GSO ASTM F2939:2022 Standard Specification for High Voltage Phasing Testers
BH GSO ASTM F2939:2023 Standard Specification for High Voltage Phasing Testers
GSO ISO 15601:2014 Hammers -- Technical specifications concerning steel hammer heads -- Test procedures

Society of Automotive Engineers (SAE)

SAE J1699-4-2021 OBD-II Related SAE Specification Verification Test Procedures
SAE J1699-2-2017 OBD-II Related SAE Specification Verification Test Procedures
SAE J1699/2-1998 OBD-II Related SAE Specification Verification Test Procedures1
SAE J1699-2-1998 OBD-II Related SAE Specification Verification Test procedures

Institute of Electrical and Electronics Engineers (IEEE)

IEEE Std 252-1977 IEEE Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE Std 252-1995 IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE P252/D2, June 2022 IEEE Draft Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE P252/D3, September 2022 IEEE Approved Draft Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap
IEEE P252 IEEE Approved Draft Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap

American Society for Testing and Materials (ASTM)

ASTM D6886-12 Standard Test Method for Determination of the Individual Volatile Organic Compounds (VOCs) in Air-Dry Coatings by Gas Chromatography

IEEE - The Institute of Electrical and Electronics Engineers@ Inc.

IEEE 252-1977 TEST PROCEDURE FOR POLYPHASE INDUCTION MOTORS HAVING LIQUID IN THE MAGNETIC GAP (R 1984)
IEEE SYNCHROPHASOR MEASUREMENT TSS-2014 Synchrophasor Measurement Test Suite Specification

British Standards Institution (BSI)

BS EN IEC 60794-1-219:2022 Optical fibre cables - Generic specification. Basic optical cable test procedures. Material compatibility test, method F19

SCC

BS 5550-5.4.2:1983 Cinematography. Common to more than one gauge. Sound-Specification for photographic-monophonic sound test films

Korean Agency for Technology and Standards (KATS)

KS B ISO 15601-2022 Hammers — Technical specifications concerning steel hammer heads — Test procedures

ES-UNE

IEEE 252-2022 IEEE Standard Test Procedure for Polyphase Induction Motors Having Liquid in the Magnetic Gap

US-AAMA

AAMA 2603-2013 Voluntary Specification, Performance Requirements and Test Procedures For Pigmented Organic Coatings on Aluminum Extrusions and Panels
AAMA 2603-2002 Voluntary Specification, Performance Requirements and Test Procedures For Pigmented Organic Coatings on Aluminum Extrusions and Panels
AAMA 615-2005 Voluntary Specification,Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Plastic Profiles
AAMA 615-2013 Voluntary Specification,Performance Requirements and Test Procedures for Superior Performing Organic Coatings on Plastic Profiles
AAMA 614-2013 Voluntary Specification,Performance Requirements and Test Procedures for High Performance Organic Coatings on Plastic Profiles

German Institute for Standardization

DIN EN 116000-3:1996-10 Generic specification - Electromechanical all-or-nothing relays - Part 3: Test and measurement procedures; German version EN 116000-3:1996 / Note: To be replaced by DIN EN 61810-7 (2005-02).
DIN EN 17634:2023-07 Electronic cigarettes and e-liquids - Determination of nicotine delivery consistency over defined puff sequences of a number of e-cigarettes of identical type; German version EN 17634:2023

Lithuanian Standards Office

LST EN 116000-3-2001 Generic specification. Electromechanical all-or-nothing relays. Part 3: Test and measurement procedures

International Telecommunication Union (ITU)

ITU-R SM.2096-2016 Test procedure for measuring direction finder sensitivity in the VHF/UHF frequency range

ITU-R - International Telecommunication Union/ITU Radiocommunication Sector

ITU-R SM.2096-0-2016 Test procedure for measuring direction finder sensitivity in the VHF/UHF frequency range

Danish Standards Foundation

DS/EN 116000-3:1996 Generic specification: Electromechanical all-or-nothing relays - Part 3: Test and measurement procedures

European Committee for Electrotechnical Standardization（CENELEC）

EN 116000-3:1996 Generic Specification: Electromechanical All- or-Nothing Relays Part 3: Test and Measurement Procedures

European Committee for Standardization (CEN)

EN 16693:2015 Water quality - Determination of organochlorine pesticides (OCP) in whole water samples - Method using solid phase extraction (SPE) with SPE-disks combined with gas chromatography mass spectrometry (GC-MS)
EN 17634:2023 Electronic cigarettes and e-liquids - Determination of nicotine delivery consistency over defined puff sequences of a number of e-cigarettes of identical type

AWS - American Welding Society

B2.1-1-015-1991 Standard Welding Procedure Specification (WPS) for Gas Tungsten Arc Welding of Aluminum@ (M-22 to P-22)@ 10 Through 18 Gauge@ in the As-Welded Condition@ with or Without Backing

PL-PKN

PN Z04226-01-1992 Air purity protection Tests for individual toxic substances compounds (in theirs mixtures) in indoor air General

Japanese Industrial Standards Committee (JISC)

JIS X 6913:2008 Standard specification form for digital duplicator and related testing procedure

Standard Association of Australia （SAA）

ISO 27608:2010/Amd.1:2016 Animal and vegetable fats and oils — Determination of Lovibond® colour — Automatic method AMENDMENT 1

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4495-2002 An Analytical Verification Test Suite for Building Fabric Models in Whole Buileding Energy Simulation Programs (RP-1052)

Others: