Standard limits for tin in groundwater

Standard limits for tin in groundwater, Total:236 items.

The international standard classification for "Standard limits for tin in groundwater" includes: Water quality , Noise with respect to human beings , Noise emitted by means of transport , Water of natural resources , Sewage water .

The Chinese standard classification for "Standard limits for tin in groundwater" includes: Environmental Quality Standard for atmosphere, water and soil , Hydrogeological survey , Railway engineering , Urban traffic facility , Railway vehicles in general .

Group Standards of the People's Republic of China

T/CECS 1097-2022 Protection standard for urban underground drainage facilities
T/SBX 11-2018 Groundwater Quality Standard Petroleum Limits
T/SERA 2-2023 Technical standards for groundwater pollution prevention and control in coal mining areas
T/SHDZ 001-2023 Technical standards for construction of shallow groundwater environmental monitoring wells
T/HBBWA 43-2021 Technical standard for waterproof engineering of underground comprehensive pipe gallery by open cut method
T/CSES 34-2021 Technical guidelines for discharge standards and limits for watersheds based on water quality objectives (on trial)
T/UCST 009-2020 Technical Standard for Groundwater Recharge in Urban Construction Projects
T/HBTL 007-2020 Standard for the content limit of volatile organic compounds in low-VOC roofing waterproof coatings
T/SMA 0020-2021 Specifications for multibeam sounding system in underwater topographic testing of immersed tunnel

Professional Standard - Geology

DZ/T 0064.5-1993 Groundwater quality test methods - the determination of PH value with glass electrode method
DZ/T 0290-2015 Standard for groundwater quality
DZ/T 0064.7-1993 Groundwater quality test methods - the determination of Eh value
DZ/T 0064.7-2021 Methods for analysis of groundwater quality- Part 7: Determination of oxidation-reduction potential Potential method

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 50455-2020 Standayd for design of underground oil storage in rock caverns
GB 14892-1994 Noise limitsinside drivercabs and passenger compartments of subway powered car train-sets
GB 30721-2014 Minimum allowable values of the energy efficiency and energy efficiency grades for water-source（ground-source）heat pumps
GB 15218-1994 Standard of classificatoin for groundwater resources
GB 14227-1993 Acoustical requirement and measurement on station platform of urban rail transit
GB/T 15218-1994 Standards of classification for groundwater resources

中华人民共和国环境保护部

GB/T 14848-1993 Quality standard for ground water

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 14848-2017 Standard for groundwater quality

Professional Standard - Urban Construction

CJJ 96-2003 Standard of metro gauges
CJJ/T 96-2018 Standard for metro gauges
GB/T 51040-2023 Technical standards for groundwater monitoring

Professional Standard - Recommended Standards for Engineering Construction

CECS 53-1993 Standard for Maximum Alkali Content in Concrete

China State Construction Engineering Corporation

ZJQ00-SG-019-2006 Standard for constuction quality of underground waterproof

Professional Standard - Traffic

JT/T 827-2012 Limits and Verification Methods of CO2 Emission for Commercial Ships

工业和信息化部/国家能源局

JB/T 10046-2017 Limits and n;est0eent methods of noise fog machine tool electrical apparatus

Qinghai Provincial Standard of the People's Republic of China

DB63/T 2342-2024 Groundwater control early warning indicators

VN-TCVN

TCVN 5944-1995 Water quality.Ground water quality standard

SCC

ASTM HYDRO99-99 ASTM Standards on Determining Subsurface Hydraulic Properties & Ground-Water Modeling
AWWA WELLS Custom Manual/Standard Set: Wells & Groundwater
AWWA ACE59995 Rethinking Contaminated Groundwater's Value as a Drinking Water Resource
AWWA ACE56246 Evolution and Status of California's Proposed Criteria for Groundwater Recharge With Reclaimed Water
AWWA SOURCES66415 Groundwater Withdrawal Management: Limiting Impacts to Sensitive Ecological Receptors
AWWA 51517 New and Improved Draft Groundwater Recharge Criteria in California
ASTM DESIGN99-99 ASTM Standards on Design, Planning & Reporting of Ground Water & Vadose Zone Investigations
NACE TM0497-2018 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems
NACE TM0497-2012 Measurement Techniques Related to Criteria for Cathodic Protection on Underground or Submerged Metallic Piping Systems

American Society for Testing and Materials (ASTM)

ASTM D5447-17 Standard Guide for Application of a Numerical Groundwater Flow Model to a Site-Specific Problem
ASTM D6106-97e1 Standard Guide for Establishing the Nomenclature of Ground-Water Aquifers
ASTM D6106-97(2004) Standard Guide for Establishing the Nomenclature of Ground-Water Aquifers
ASTM C508-00(2004) Standard Specification for Asbestos-Cement Underdrain Pipe
ASTM D6312-98 Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs
ASTM C508/C508M-00(2015) Standard Specification for Asbestos-Cement Underdrain Pipe
ASTM D6000-96(2002) Standard Guide for Presentation of Water-Level Information From Ground-Water Sites
ASTM C508-00e1 Standard Specification for Asbestos-Cement Underdrain Pipe
ASTM D6000-96e1 Standard Guide for Presentation of Water-Level Information From Ground-Water Sites
ASTM D6312-98(2005) Standard Guide for Developing Appropriate Statistical Approaches for Ground-Water Detection Monitoring Programs
ASTM C508/C508M-00(2009)e1 Standard Specification for Asbestos-Cement Underdrain Pipe
ASTM C508-98 Standard Specification for Asbestos-Cement Underdrain Pipe
ASTM F3441-23 Standard Guide for Measurement of pH Below Resilient Flooring Installations
ASTM C508-00 Standard Specification for Asbestos-Cement Underdrain Pipe
ASTM D6564/D6564M-17 Standard Guide for Field Filtration of Groundwater Samples
ASTM D5981-96(2008) Standard Guide for Calibrating a Ground-Water Flow Model Application
ASTM D4448-85a(1992) Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D4448-01(2013) Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D5981-96(2002) Standard Guide for Calibrating a Ground-Water Flow Model Application
ASTM D4448-01(2019) Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D4448-01(2007) Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D5981/D5981M-18 Standard Guide for Calibrating a Groundwater Flow Model Application
ASTM D5719-95(2000) Standard Guide for Simulation of Subsurface Airflow Using Ground-Water Flow Modeling Codes
ASTM D5981-96e1 Standard Guide for Calibrating a Ground-Water Flow Model Application
ASTM D6564-00 Standard Guide for Field Filtration of Ground-Water Samples
ASTM D6517-18(2023) Standard Guide for Field Preservation of Ground Water Samples
ASTM D6564/D6564M-17(2024) Standard Guide for Field Filtration of Groundwater Samples
ASTM D6089-97e1 Standard Guide for Documenting a Ground-Water Sampling Event
ASTM D6170-17 Standard Guide for Selecting a Groundwater Modeling Code
ASTM D6106-97(2010) Standard Guide for Establishing Nomenclature of Groundwater Aquifers
ASTM D6170-97(2010) Standard Guide for Selecting a Groundwater Modeling Code
ASTM D6170-97(2004) Standard Guide for Selecting a Ground-Water Modeling Code
ASTM D6033-96(2008) Standard Guide for Describing the Functionality of a Ground-Water Modeling Code
ASTM D6033-96(2002) Standard Guide for Describing the Functionality of a Ground-Water Modeling Code
ASTM D6089-19(2023) Standard Guide for Documenting a Groundwater Sampling Event
ASTM D6517-00 Standard Guide for Field Preservation of Ground-Water Samples
ASTM D6170-97e1 Standard Guide for Selecting a Ground-Water Modeling Code
ASTM D6564-00(2012)e1 Standard Guide for Field Filtration of Groundwater Samples
ASTM D6089-19 Standard Guide for Documenting a Groundwater Sampling Event
ASTM C1447/C1447M-04(2014) Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM C1447/C1447M-04(2019) Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM D6517-00(2012)e1 Standard Guide for Field Preservation of Groundwater Samples
ASTM D6517-00(2005) Standard Guide for Field Preservation of Ground-Water Samples
ASTM D8082-18 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
ASTM D6000-96(2008) Standard Guide for Presentation of Water-Level Information from Groundwater Sites
ASTM D6564-00(2005) Standard Guide for Field Filtration of Ground-Water Samples
ASTM D608-90(2001) Standard Specification for Dibutyl Phthalate
ASTM D6517-18 Standard Guide for Field Preservation of Ground Water Samples
ASTM D8082-18(2024)e1 Standard Specification for Elemental Impurity Limits in Erosion Control Products used for Land Application
ASTM D6000-15 Standard Guide for Presentation of Water-Level Information from Groundwater Sites
ASTM D6025-96e1 Standard Guide for Developing and Evaluating Ground-Water Modeling Codes
ASTM D6000/D6000M-15e1 Standard Guide for Presentation of Water-Level Information from Groundwater Sites
ASTM D6025-96(2008) Standard Guide for Developing and Evaluating Ground-Water Modeling Codes
ASTM D5903-96(2023) Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM D5719-13 Standard Guide for Simulation of Subsurface Airflow Using Groundwater Flow Modeling Codes
ASTM D6452-18(2023) Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations
ASTM D6025-96(2002) Standard Guide for Developing and Evaluating Ground-Water Modeling Codes
ASTM D5903-96e1 Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM D5903-96(2017)e1 Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM D6506-01 Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing
ASTM D5978-96(2005) Standard Guide for Maintenance and Rehabilitation of Ground-Water Monitoring Wells
ASTM D6506-01(2009) Standard Specification for Asphalt Based Protection for Below-Grade Waterproofing
ASTM D5903-96(2012) Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM D5903-96(2001) Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM D6171-97(2004) Standard Guide for Documenting a Ground-Water Modeling Code
ASTM D6171-97(2010) Standard Guide for Documenting a Groundwater Modeling Code
ASTM D6171-97e1 Standard Guide for Documenting a Ground-Water Modeling Code
ASTM D4448-01 Standard Guide for Sampling Ground-Water Monitoring Wells
ASTM D6089-97(2003) Standard Guide for Documenting a Ground-Water Sampling Event
ASTM D5609-94(2008) Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling
ASTM C1447-04 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM D6452-99(2012)e1 Standard Guide for Purging Methods for Wells Used for Groundwater Quality Investigations
ASTM D5610-94(2014) Standard Guide for Defining Initial Conditions in Groundwater Flow Modeling
ASTM D6724-01 Standard Guide for Installation of Direct Push Ground Water Monitoring Wells
ASTM F449-02e1 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM F449-02(2014) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM F449-02 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM D5979-96e1 Standard Guide for Conceptualization and Characterization of Ground-Water Systems
ASTM D5610-94(2008) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D5979-96(2019)e1 Standard Guide for Conceptualization and Characterization of Groundwater Systems
ASTM D6089-97(2010) Standard Guide for Documenting a Groundwater Sampling Event
ASTM D5521/D5521M-13 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
ASTM D5521/D5521M-18 Standard Guide for Development of Groundwater Monitoring Wells in Granular Aquifers
ASTM E1155-96(2001) Standard Test Method for Determining F _F Floor Flatness and F _L Floor Levelness Numbers
ASTM D6724/D6724M-16(2024)e1 Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
ASTM D6033-16 Standard Guide for Describing the Functionality of a Groundwater Modeling Code
ASTM D6033-96e1 Standard Guide for Describing the Functionality of a Ground-Water Modeling Code
ASTM C1447-99 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM E1155-96 Standard Test Method for Determining F _F Floor Flatness and F _L Floor Levelness Numbers
ASTM C1447/C1447M-04e1 Standard Specification for Non-Asbestos Fiber-Cement Underdrain Pipe
ASTM D5521-05 Standard Guide for Development of Ground-Water Monitoring Wells in Granular Aquifers
ASTM D5610-94(2002) Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D5978/D5978M-16(2024) Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
ASTM E1155-20 Standard Test Method for Determining F F Floor Flatness and F L Floor Levelness Numbers
ASTM D5719-95(2006) Standard Guide for Simulation of Subsurface Airflow Using Ground-Water Flow Modeling Codes
ASTM F449-02(2008) Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM D5474-93(2012) Standard Guide for Selection of Data Elements for Groundwater Investigations
ASTM D5474-93(2000) Standard Guide for Selection of Data Elements for Ground-Water Investigations
ASTM D5474-93(2006) Standard Guide for Selection of Data Elements for Ground-Water Investigations
ASTM D5979-96(2002) Standard Guide for Conceptualization and Characterization of Ground-Water Systems
ASTM D5979-96(2008) Standard Guide for Conceptualization and Characterization of Ground-Water Systems
ASTM D7069-04(2010) Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
ASTM D7069-04 Standard Guide for Field Quality Assurance in a Ground-water Sampling Event
ASTM D5903-96(2006) Standard Guide for Planning and Preparing for a Groundwater Sampling Event
ASTM D5979-96(2014) Standard Guide for Conceptualization and Characterization of Groundwater Systems
ASTM D6707/D6707M-06(2024) Standard Specification for Circular-Knit Geotextile for Use in Subsurface Drainage Applications
ASTM D6259-98(2010) Standard Practice for Determination of a Pooled Limit of Quantitation
ASTM F449-16 Standard Practice for Subsurface Installation of Corrugated Polyethylene Pipe for Agricultural Drainage or Water Table Control
ASTM D6089-15 Standard Guide for Documenting a Groundwater Sampling Event
ASTM E1155M-96 Standard Test Method for Determining F _F Floor Flatness and F _L Floor Levelness Numbers [Metric]
ASTM D5978/D5978M-16 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
ASTM E1155/E1155M-23 Standard Test Method for Determining F F Floor Flatness and F L Floor Levelness Numbers
ASTM D5092-04 Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
ASTM D6724-04(2010) Standard Guide for Installation of Direct Push Groundwater Monitoring Wells
ASTM D5609-16 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
ASTM D5978-96e1 Standard Guide for Maintenance and Rehabilitation of Ground-Water Monitoring Wells
ASTM D5611-94(2002) Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
ASTM D6452-18 Standard Guide for Purging Methods for Wells Used for Ground Water Quality Investigations
ASTM D5092/D5092M-16 Standard Practice for Design and Installation of Groundwater Monitoring Wells
ASTM D5718-95(2006) Standard Guide for Documenting a Ground-Water Flow Model Application
ASTM D1293-99 Standard Test Methods for pH of Water
ASTM D5718-13 Standard Guide for Documenting a Groundwater Flow Model Application
ASTM D5092-04(2010)e1 Standard Practice for Design and Installation of Groundwater Monitoring Wells
ASTM D6452-99 Standard Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations
ASTM D5092/D5092M-16(2024) Standard Practice for Design and Installation of Groundwater Monitoring Wells
ASTM D5092-04e1 Standard Practice for Design and Installation of Ground Water Monitoring Wells
ASTM D6724-04 Standard Guide for Installation of Direct Push Ground Water Monitoring Wells
ASTM D5609-94(2015)e1 Standard Guide for Defining Boundary Conditions in Groundwater Flow Modeling
ASTM D5611-94(2008) Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
ASTM D5718-95(2012) Standard Guide for Documenting a Groundwater Flow Model Application
ASTM D5718-95(2000) Standard Guide for Documenting a Ground-Water Flow Model Application
ASTM E3219-20 Standard Guide for Derivation of Health-Based Exposure Limits (HBELs)
ASTM D1293-84(1990) Standard Test Methods for pH of Water
ASTM D5611-94e1 Standard Guide for Conducting a Sensitivity Analysis for a Ground-Water Flow Model Application
ASTM D1293-99(2005) Standard Test Methods for pH of Water
ASTM D6452-99(2005) Standard Guide for Purging Methods for Wells Used for Ground-Water Quality Investigations
ASTM D7069-04(2015) Standard Guide for Field Quality Assurance in a Groundwater Sampling Event
ASTM D5092-90(1995)e1 Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
ASTM D1293-12 Standard Test Methods for pH of Water
ASTM B339-00 Standard Specification for Pig Tin
ASTM D1293-18 Standard Test Methods for pH of Water
ASTM D5490-93(2002) Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
ASTM D5490-93(2008) Standard Guide for Comparing Ground-Water Flow Model Simulations to Site-Specific Information
ASTM E1232-91(1996) Standard Test Method for Temperature Limit of Flammability of Chemicals
ASTM B339-00(2010) Standard Specification for Pig Tin
ASTM D5447-04(2010) Standard Guide for Application of a Groundwater Flow Model to a Site-Specific Problem
ASTM D6634-01 Standard Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells
ASTM D5447-04 Standard Guide for Application of a Ground-Water Flow Model to a Site-Specific Problem
ASTM D5609-94(2002) Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling
ASTM D7929-20 Standard Guide for Selection of Passive Techniques for Sampling Groundwater Monitoring Wells
ASTM D5610-94e1 Standard Guide for Defining Initial Conditions in Ground-Water Flow Modeling
ASTM D5609-94e1 Standard Guide for Defining Boundary Conditions in Ground-Water Flow Modeling
ASTM D5490-93(2014)e1 Standard Guide for Comparing Groundwater Flow Model Simulations to Site-Specific Information
ASTM D6634-01(2006) Standard Guide for the Selection of Purging and Sampling Devices for Ground-Water Monitoring Wells
ASTM E3361-22 Standard Guide for Estimating Natural Attenuation Rates for Non-Aqueous Phase Liquids in the Subsurface
ASTM D5611-94(2016) Standard Guide for Conducting a Sensitivity Analysis for a Groundwater Flow Model Application
ASTM D5978-96(2011)e1 Standard Guide for Maintenance and Rehabilitation of Groundwater Monitoring Wells
ASTM D2321-09 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D6620-00 Standard Practice for Asbestos Detection Limit Based on Counts
ASTM D5254-92(2004) Standard Practice for Minimum Set of Data Elements to Identify a Ground-Water Site
ASTM E1232-02 Standard Test Method for Temperature Limit of Flammability of Chemicals
ASTM E681-01 Standard Test Method for Concentration Limits of Flammability of Chemicals (Vapors and Gases)
ASTM D2321-04 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM D5254/D5254M-92(2010)e1 Standard Practice for Minimum Set of Data Elements to Identify a Groundwater Site
ASTM D5092-02 Standard Practice for Design and Installation of Ground Water Monitoring Wells in Aquifers
ASTM D2321-11 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications
ASTM B339-00(2005) Standard Specification for Pig Tin
ASTM D2321-04e1 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

API - American Petroleum Institute

API PUBL 4366-1983 GUIDE TO GROUND-WATER STANDARDS OF THE UNITED STATES
API PUBL 4416-1986 Guide to State Groundwater Programs and Standards (First Edition)
API PUBL 4510-1991 Technological Limits of Groundwater Remediation: A Statistical Evaluation Method
API BULL 1602-1959 Recommended Standard For UNDERGROUND GASOLINE TANKS

British Standards Institution (BSI)

ASTM F3441-23a Standard Guide for Measurement of pH Below Resilient Flooring Installations
BS EN ISO 8130-4:2010 Coating powders. Calculation of lower explosion limit

American Concrete Institute

ACI 225.1T-2020 Removal of Optional Alkali Limit in Standard Specifications for Portland Cement

American Society of Civil Engineers (ASCE)

ASCE EWRI/ASCE 34-01-2001 Standard Guidelines for Artifical Recharge of Ground Water
ASCE 34-01-2001 Standard Guidelines for Artifical Recharge of Ground Water

Japanese Industrial Standards Committee (JISC)

JIS Z 9043:1962 Significance test of difference between the population mean and the standard (standard deviation known, two-sided)
JIS Z 9045:1962 Significance test of difference between the population mean and the standard (standard deviation unknown, two-sided)

Korean Agency for Technology and Standards (KATS)

KS C IEC 60719-2003(2018) Calculation of the lower and upper limits of the average finished outer diameter of round copper conductor cables with a rated voltage of 450V or more and 750V or less.
KS M ISO 8130-4:2008 Coating powders－Part 4：Calculation of lower explosion limit

KR-KS

KS C IEC 60719-2003(2023) Calculation of the lower and upper limits of the average finished outer diameter of round copper conductor cables with a rated voltage of 450V or more and 750V or less.

CU-NC

NC 93-01-103-1987 Standards System for Environment Protection. Hydrosphere. Classification of Underground Waters Utilization

American National Standards Institute （ANSI)

ANSI/NFPA 520-2010 Standard on Subterranean Spaces
ANSI/UL 14B-2008 Standard for Sliding Hardware for Standard, Horizontally Mounted Tin-Clad Fire Doors
ANSI/FCI 69-1-1989 Pressure Rating Standard for Steam Traps

Danish Standards Foundation

DS/EN 20286-2:1993 ISO system of limits and fits. Part 2: Tables of standard tolerance grades and limit deviations for holes and shafts

European Committee for Standardization (CEN)

EN ISO 8130-4:2022 Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:2021)
EN ISO 8130-4:2010 Coating powders - Part 4: Calculation of lower explosion limit (ISO 8130-4:1992, including Cor 1:1993)

IN-BIS

IS 2490 Pt.4-1974 Permissible limits for industrial wastewater discharged into inland surface waters Part IV Straw Industry

Underwriters Laboratories (UL)

UL 14B BULLETIN-2009 UL Standard for Safety Sliding Hardware for Standard@ Horizontally Mounted Tin-Clad Fire Doors
UL 14B BULLETIN-2012 UL Standard for Safety Sliding Hardware for Standard@ Horizontally Mounted Tin-Clad Fire Doors
UL 14B BULLETIN-2015 UL Standard for Safety Sliding Hardware for Standard@ Horizontally Mounted Tin-Clad Fire Doors

AT-ON

ONORM M 9451-1988 Emission limits forair contaminants from the cement industries

RU-GOST R

GOST 16372-1993 Rotating electric machines. Limiting values of noise levels

GSO

GSO ASTM D2321:2024 Standard Practice for Underground Installation of Thermoplastic Pipe for Sewers and Other Gravity-Flow Applications

CZ-CSN

CSN 73 6615-1980 Captation of groundwater

Others: