High pressure tapered joint

High pressure tapered joint, Total:237 items.

The international standard classification for "High pressure tapered joint" includes: Piping and couplings , Laboratory ware and related apparatus , Components for aerospace construction , Rings, bushes, sleeves, collars , Road vehicle systems .

The Chinese standard classification for "High pressure tapered joint" includes: Hydraulic and pneumatic device , Laboratory glass, ceramic and plastic vessel , Fasteners , Pipeline fittings , Plug screws, pipe fittings , Laboratory instrument and vacuum instrument in general .

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 9065.6-2020 Connections for hydraulic fluid power—Hose fittings—Part 6: 60° cone ends

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 14034.4-2023 Connections for hydraulic fluid power—Metallic tube connectors—Part 4: 60° cone connectors
GB/T 21297-2007 Laboratory glassware—Interchangeable conical ground joint
GB/T 14034.1-2023 Connections for hydraulic fluid power—Metallic tube connectors—Part 1: 24°cone connectors
GB/T 9065.2-2010 Connections for hydraulic fluid power and general use—Hose fittings—Part 2:Hose fittings with 24°cone connector ends

Taiwan Provincial Standard of the People's Republic of China

CNS 5479-1980 Interchangeable Conical Ground Joints for Laboratory Glassware
CNS 5480-1980 Suitable Gauging System for Diameter and Length of Conicial Joints
CNS 5481-1980 Leakage Test for Conical Joints

Professional Standard - Aerospace

QJ 2889.3-1997 37° Conduit Connector - Type and Size of Tapered Sraight Joint
QJ 2889.10-1997 37° Conduit Connector - Type and Size of Tapered Tee Joint
QJ 216-1977 Tapered tee joint type and size

Group Standards of the People's Republic of China

T/ZZB 1248-2019 Connections for hadraulic fluid power and general use—Hose fittings—Hose fittingswith 24°cone connector ends
T/QGCML 1469-2023 Conical head

Professional Standard - Machinery

JB/T 6385-2007 Welding cone couplings pressure-gauge couplings
JB/T 6385-1992 Cone seal welded pressure gauge pipe joint

Professional Standard - Automobile

QC/T 381-2013 Hexagon outside head cone plugs
QC/T 379-1999 Square head cone plug
QC/T 379-2013 Square head cone plugs
QC/T 381-1999 Hexagon outside head cone plug

未注明发布机构

DIN EN ISO 5356-1 E:2013-10 Conical fittings for anesthesia and respiratory equipment Part 1: Cones and drogues (draft)
DIN EN ISO 5356-1 E:2012-04 Conical fittings for anesthesia and respiratory equipment Part 1: Cones and drogues (draft)

Professional Standard - Petroleum

SY/T 5211-1993 High pressure pipe connection and high pressure swivel elbow

Professional Standard - Aviation

HB 3241-1979 Taper Fitting

Professional Standard - Light Industry

QB 1504-1992 Laboratory Glassware - Interchangeable Conical Ground Joint

Defense Logistics Agency

DLA AN800 REV 5 NOTICE 1-1998 CONE-UNION
DLA AN800 REV 5-1954 CONE-UNION
DLA A-A-59935/6-2013 CONICAL SEALS, CRUSH, 37 DEGREE FLARED TUBE FITTING, SERRATED
DLA A-A-59935/3-2013 CONICAL SEALS, CRUSH, 37 DEGREE FLARED TUBE FITTING, NICKEL
DLA A-A-59935/1-2013 CONICAL SEALS, CRUSH, 37 DEGREE FLARED TUBE FITTTING, ALUMINUM ALLOY
DLA A-A-51186 B-2005 FILES, ROTARY, TAPERED, 14 DEGREE CONE SHAPE, RADIUS NOSE, HIGH SPEED STEEL OR TUNGSTEN CARBIDE

SCC

AENOR UNE 10027:1985 High pressure fitting. Provided with a 60 degree female cone.
UNE 10027:1985 ROAD VEHICLES. HIGH PRESSURE PIPE FITTINGS WITH 60 DEGREES FEMALE CONE.
NS 581:1967 Brass pipe fittings - Threaded couplings with conical jointing
06/30153386 DC BS ISO 6752. Tools for pressing. Round punches with 60 degrees conical head and straight shank
BS 572:1934 Interchangeable conical ground glass joints
AS 2409:1981 Interchangeable conical ground glass joints
BS 572:1960 Interchangeable conical ground glass joints
BS 3581:1963 Specification for stainless steel cone joint pipe fittings
BS 572:1950 Interchangeable conical ground glass joints
NS 4500:1969 Interchangeable conical ground glass joints
BS 3930-2:1991 Conical fittings with a 6% (Luer) taper for syringes, needles and other medical equipment-Specification for lock fittings
DIN 12256 E:2021 Draft Document - Laboratory glassware - Tightness test of conical joints, spherical joints and stopcocks
DANSK DS/EN ISO 5183-1:2000 Resistance spot welding - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10
NS 5036:1973 Round punches with conical head - Form C and CA
DANSK DS/EN 1707:1997 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment – Lock fittings
NS 5035:1973 Round punches with conical head - Form D and DA

Association Francaise de Normalisation

NF M82-255:1955 MINING EQUIPMENT. COMPRESSED AIR PIPES. BALL OR CONE AND FLANGE COUPLINGS.
NF E63-111:1986 Press tools. Punches with 30 degrees conical head.
NF E63-109:1984 Press tools. Punches with 60 degrees conical head.
NF A82-104-1*NF EN ISO 5183-1:2000 Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1 : conical fixing, taper 1:10
NF S95-111-1:2005 Anaesthetic and respiratory equipment - Conical connectors - Part 1 : cones and sockets.
NF S95-111-1*NF EN ISO 5356-1:2015 Anaesthetic and respiratory equipment - Conical connectors - Part 1 : cones and sockets
NF ISO 9181:2007 Press tools - Round punches with 60o conical head and shouldered body
NF E71-211:1983 Taperpunches. Pin punches. Centre punches.
NF E63-115:1991 Tools for pressing. Round punches with 60 degrees C conical head and reduced shank.
NF E63-115*NF ISO 9181:2007 Tools for pressing - Round punches with 60o conical head and reduced shank
NF E48-064-1:2007 Metallic tube connections for fluid power and general use - Part 1 : 24 degree cone connectors.
NF S95-111-2*NF EN ISO 5356-2:2013 Anaesthetic and respiratory equipment - Conical connectors - Part 2 : screw-threaded weight-bearing connectors

Society of Automotive Engineers (SAE)

SAE AGS209-19-1949 AGS209 Standard Conical Nipples
SAE AS4825-2015 GASKET, FITTING END, 24° CONE
SAE AGS1106-15-1975 AGS1106 Pipe Couplings (Aluminium Alloy) Union Body (Cone to Nipple Type)
SAE AGS1125-10-1975 AGS1125 Pipe Couplings (Aluminium Alloy.) Cone 4 Way Piece (Unequal)
SAE AGS1198-5-1945 AGS1198 Pipe Couplings Cone Tee (Equal)
SAE AGS1108-16-1975 AGS1108 Pipe Couplings. (Aluminium Alloy) Reducing Union. (Cone to Nipple Type)
SAE AS5449B-2023 FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD
SAE AS5449-2013 FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD
SAE AS5449A-2020 FITTING END, WELD RING, SHORT TAPERED, DESIGN STANDARD
SAE AS4510/1-2013 Fittings, Weld to 24° Cone Flareless, Fluid Connection
SAE AS15001-2005 FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, STEEL, TYPE I
SAE AS18280G-2019 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
SAE AS18280A-2004 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
SAE MA2095C-2015 FITTING END, 24° CONE, DESIGN STANDARD, METRIC
SAE AS18280F-2017 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi
SAE AS4444-2013 Fittings, 24° Cone Flareless, Fluid Connection, 5000 psi
SAE AGS1113-13-1975 AGS1113 Pipe Couplings (Aluminium Alloy) Flanged Bulkhead Union B'dy. (Cone to Nipple Type)
SAE MA2096-1985 FITTING END, 24° CONE, BULKHEAD, STANDARD DIMENSIONS FOR
SAE MA2095B-2002 FITTING END, 24° CONE, DESIGN STANDARD, METRIC
SAE AS63400-1-1994 AS63400 Pipe Couplings, Cone Caps 3/16" to 1/2"
SAE AS18280H-2021 Fittings, 24 Degree Cone Flareless, Fluid Connection, 3000 psi
SAE AGS1116-13-1975 AGS1116 Pipe Couplings (Aluminium Alloy), Cone Elbow 3/16" to 1/2"
SAE AGS1120-13-1975 AGS1120 Pipe Couplings. (Aluminium Alloy) Cone Tee (Unequal)
SAE AS15001-2001 Fitting, Lubrication, Hydraulic, Surface Check, .250-28 Taper Threads, Steel, Type I FSC 4730
SAE AS4444/1-2013 Sleeve, Bite Type, 24° Cone Flareless Fitting
SAE AGS1143-16-1982 AGS1143 Pipe Couplings Cone Plugs (3/16" to 1 1/2")
SAE MA2112-1985 ADAPTER - PORT CONNECTION RING LOCKED TO 24° CONE FITTING
SAE MA4510/1-2015 Fittings, Weld to 24° Cone Flareless, Fluid Connection, Metric
SAE MA2113A-1993 ADAPTER - PORT CONNECTION RING LOCKED TO 60° CONE FITTING
SAE MA2113-1985 ADAPTER - PORT CONNECTION RING LOCKED TO 60° CONE FITTING
SAE MA2112A-2011 ADAPTER - PORT CONNECTION RING LOCKED TO 24° CONE FITTING
SAE AS4444/2-2015 Fitting, 24° Cone Flareless to 37° Flared, Fluid Connection
SAE AS4325-2007 FITTING END, CONICAL, STANDARD DIMENSIONS FOR, DESIGN STANDARD
SAE MA2096B-2002 FITTING END, 24° CONE, BULKHEAD, DESIGN STANDARD, METRIC
SAE AGS1236-6-1978 AGS1236 Pipe Couplings, Cone Caps, (Steel) 3/16" to 1 1/2"
SAE AS15004-2005 FITTING, LUBRICATION, HYDRAULIC, SURFACE CHECK, .250-28 TAPER THREADS, NICKEL-COPPER ALLOY, TYPE IV
SAE MA2096C-2015 FITTING END, 24° CONE, BULKHEAD, DESIGN STANDARD, METRIC
SAE AS18280SUP1A-2015 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi (Supplement 1)
SAE AS5000E-2020 Fitting, Plug-in Union, Ring Locked, 24 Degree Cone, Fluid Connection, 5080 psi (35000 kPa), Specification for
SAE AGS1102-15-1975 AGS1102 Pipe Couplings (Aluminium Alloy) Cone Union Body 3/16" to 1/2"
SAE AS18280SUP1-2006 Fittings, 24° Cone Flareless, Fluid Connection, 3000 psi (Supplement 1)
SAE AS18280/1-2004 Sleeve, Bite Type, 24° Cone Flareless Fitting, 3000 psi
SAE AGS1122-13-1975 AGS1122 Pipe Couplings (Aluminium Alloy) Cone and Nipple Tees. (Unequal)
SAE AGS1147-17-1975 AGS1147 Pipe Couplings Aluminium Alloy Hexagon Bulkhead Union Body (3/16" to 1/2") Cone to Nipple Type

ES-AENOR

UNE 16-134-1985 Tapered joint of collet
UNE 16-730-1986 Cylindrical awl with 60° conical head
UNE 16-130-1985 Reamer bit. tapered handle

PL-PKN

PN B13011-1974 Conical ground glass joints
PN M66227-1992 Tools for perssing. Round punches with 60 degree conical head and straight shank
PN M66228-1992 Tools for pressing. Round punches with 60 degree conical head and reduced shank

VN-TCVN

TCVN 3885-1984 Cone and conical foint.Term and definition
TCVN 288-1986 Flat conical head rivets

European Committee for Standardization (CEN)

EN ISO 5183-1:2000 Resistance Welding Equipment - Electrode Adaptors, Male Taper 1:10 - Part 1: Conical Fixing, Taper 1:10 Supersedes EN 25183-1:1991; ISO 5183-1:1998
EN ISO 8434-1:2018 Metallic tube connections for fluid power and general use - Part 1: 24��one connectors
EN ISO 8434-1:1997 Metallic Tube Connections for Fluid Power and General Use - Part 1: 24 Degree Compression Fittings ISO 8434-1: 1994

British Standards Institution (BSI)

BS ISO 2974:2013 Diesel engines. 60 degree female cones for high-pressure fuel injection components
BS ISO 2974:2016 Diesel engines. 60 female cones for high-pressure fuel injection components
BS EN ISO 5356-1:2004 Anaesthetic and respiratory equipment. Conical connectors. Cones and sockets
BS 3M 60:1998 Separable tube fittings for fluid systems, 24 ° cone - General specification
BS EN ISO 8434-4:1997 Metallic tube connections for fluid power and general use - 24 ° cone connectors with O-ring weld-on nipples
BS 572:1985 Specification for interchangeable conical ground glass joints
BS EN 10226-2:2005(2016) Pipe threads where pressure tight joints are made on the threads - Taper external threads and taper internal threads - Dimensions, tolerances and designation
BS EN ISO 5356-2:2012 Anaesthetic and respiratory equipment. Conical connectors. Screw-threaded weight-bearing connectors
BS ISO 12151-2:2003 Connections for hydraulic fluid power and general use - Hose fittings - Hose fittings with ISO 8434-1 and ISO 8434-4 24 ° cone connector ends with O-rings
BS ISO 8434-6:2010 Metallic tube connections for fluid power and general use. 60 cone connectors with or without O-ring
BS ISO 8434-6:2009 Metallic tube connections for fluid power and general use - 60 ° cone connectors with or without O-ring
BS EN ISO 8430-1:2016 Resistance spot welding. Electrode holders. Taper fixing 1:10
BS ISO 12151-2:2022 Connections for hydraulic fluid power and general use. Hose fittings. Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
BS EN ISO 4797:2015 Laboratory glassware. Boiling flasks with conical ground joints

TR-TSE

TS 641-1968 INTERCHANGEABLE CONICAL GROUND GLASS JOINTS

Japanese Industrial Standards Committee (JISC)

JIS R 3648:1995 Interchangeable conical ground glass joints (short length)
JIS R 3647:1995 Interchangeable conical ground glass joints (medium length)
JIS R 3646:1997 Interchangeable conical glass ground joints
JIS R 3649:1995 Interchangeable conical ground glass joints for volumetric flask
JIS R 3650:1995 Interchangeable conical ground glass joints for narrow mouth bottle

International Organization for Standardization (ISO)

ISO 2974:2013 Diesel engines - 60 degree female cones for high-pressure fuel injection components
ISO 2974:2000 Diesel engines - High-pressure fuel injection pipe end-connections with 60° female cone
ISO 2974:2005 Diesel engines - High-pressure fuel injection pipe end-connections with 60 degrees female cone
ISO 5183-1:1988 Resistance spot welding; electrode adaptors, male taper 1 : 10; part 1: conical fixing, taper 1 : 10
ISO 5183-1:1998 Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10
ISO 5356-1:2004 Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
ISO 8434-1:2007 Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors
ISO 8434-1:2018 Metallic tube connections for fluid power and general use - Part 1: 24° cone connectors
ISO 5356-1:2015 Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
ISO 12151-2:2003 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 24° cone connector ends with O-rings
ISO 5356-1:1996 Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets
ISO 5356-2:2012 Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors
ISO 5356-2:2006 Anaesthetic and respiratory equipment - Conical connectors - Part 2: Screw-threaded weight-bearing connectors
ISO 5356-2:1987 Anaesthetic and respiratory equipment; Conical connectors; Part 2 : Screw-threaded weight-bearing connectors

Korean Agency for Technology and Standards (KATS)

KS R ISO 2974:2015 Diesel engines－High-pressure fuel injection pipe end-connections with 60°female cone
KS R ISO 2974:2010 Diesel engines-High-pressure fuel injection pipe end-connections with 60°female cone
KS V ISO 7824-2014(2019) Lubrication nipples — Cone and flat types
KS B ISO 5183-1:2003 Resistance welding equipment－Electrode adaptors, male taper 1：10－Part 1：Conical fixing, taper 1：10
KS B ISO 6752:2001 Tools for pressing-Round punches with 60˚conical head and straight shank
KS B ISO 6752:2016 Tools for pressing－Round punches with 60˚conical head and straight shank
KS B 3452-2002 Drift punches
KS L 2320-2016(2021) Interchangeable conical glass ground joints
KS L 2320-2021 Interchangeable conical glass ground joints
KS B ISO 8434-4-2002(2012) Metallic tube connections for fluid power and general use－Part 4 : 24°cone connectors with O-ring weld-on nipples
KS B ISO 12151-2-2006(2021) Connections for hydraulic fluid power and general use -- Hose fittings -- Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24 degree cone connector ends with O-rings
KS C ISO 8430-1:2001 Resistance spot welding-Electrode holders-Part 1:Taper fixing 1:10
KS C ISO 8430-1:2016 Resistance spot welding－Electrode holders－Part 1：Taper fixing 1：10
KS P ISO 5356-2:2009 Anaesthetic and respiratory equipment－Conical connectors－Part 2：Screw-threaded weight-bearing connectors

ZA-SANS

SANS 5183-1:1994 Resistance spot welding — Electrode adaptors, male taper 1:10 Part 1: Conical fixing, taper 1:10
SANS 5183-1:2008 Resistance welding equipment - Electrode adaptors, male taper 1:10 Part 1: Conical fixing, taper 1:10

German Institute for Standardization

DIN EN ISO 5183-1:2000 Resistance welding equipment - Electrode adaptors, male taper 1:10 - Part 1: Conical fixing, taper 1:10 (ISO 5183-1:1998); German version EN ISO 5183-1:2000
DIN 8537:1970-10 Pneumatic tools; cone nozzle tips, connection nuts, connection nipples
DIN 3862:1995-10 Non-soldering compression couplings - Double conical ring - Design and type of port end X
DIN 2221:1982 Taper plug gauges for taper sleeves for drill chucks
DIN 2222:1982 Taper ring gauges for taper shafts for drill chucks
DIN EN ISO 5356-1:2004 Anaesthetic and respiratory equipment - Conical connectors - Part 1: Cones and sockets (ISO 5356-1:2004); German version EN ISO 5356-1:2004
DIN 2175:2008 Cold-forming taps - Technical delivery conditions for high-speed steel cold-forming taps
DIN 2175:1998 Cold-forming taps - Technical delivery conditions for high-speed steel cold-forming taps
DIN 20033:1990-07 Hose fittings; tapered nozzle with clamping nut
DIN 1898-2:1990 Taper pin hole drills with Morse taper shank
DIN 258:2012 Taper pins with thread ends and constant taper lengths
DIN 3281:1988 Valves for domestic water supply; tapered union nipples nominal pressure 10; survey
DIN 258:1977 Taper Pins with Thread Ends and Constant Taper Lengths
DIN ISO 12151-2:2004 Connections for hydraulic fluid power and general use - Hose fittings - Part 2: Hose fittings with ISO 8434-1 and ISO 8434-4 24° cone connector ends with O-rings (ISO 12151-2:2003)
DIN 3319:2002 Hand-wheels, dished - Hub hole with tapered square

Danish Standards Foundation

DS/ISO 5183:1980 Resistance spot welding electrode adaptors
DS/ISO 1089:1992 Electrode taper fits for spot welding equipment - Dimensions
DS/EN 1707:1997 Conical fittings with a 6% (Luer) taper for syringes, needles and certain other medical equipment - Lock fittings
DS/EN 10226-2:2006 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation

HU-MSZT

MNOSZ 1454-1952 Pressure cookers and boiler cone steam valves
MSZ 22 593-1976 7/24 tapered drill bit
MSZ KGST 1779-1979 Definition of tapered parts and tapered connectors

CH-SNV

SNV 37105-1966 Tapered connector. Taper angles and tapered adapters
SN ISO 2577:1987 PlasticsDetermination of temperature of evolution of flammable gases (decomposition temperature)from a small sample of pulverized material

SE-SIS

SIS SS-EN 25 183-1-1991 Resistance sp?t welding equipment — Electrode adaptors, male taper 1:10 — Part 1: Conical fixing, taper 1:10
SIS SMS 2769-1970 Hose-couplings for hydraulic hose Couplings for connection to an interna! cone
SIS SMS 2287-1970 Press tools. Round shearing punch with conic head
SIS SS 597-1991 Taper angles and conical tapers

RU-GOST R

GOST 28016-1989 Threaded pipeline connections. Welded conical nipple. Construction
GOST 13376-1978 Conical heads and connections of vessels and apparatus. Series of angles at the vertex

AT-ON

ONORM EN 25183-1-1992 Resistance spot welding - Electrode adaptors, male taper 1:10- Conical fixing, taper 1:10

American Society for Testing and Materials (ASTM)

ASTM E676-02 Standard Specification for Interchangeable Taper-Ground Joints
ASTM E676-02(2012) Standard Specification for Interchangeable Taper-Ground Joints
ASTM E676-02(2019) Standard Specification for Interchangeable Taper-Ground Joints
ASTM E676-94(1998) Standard Specification for Interchangeable Taper-Ground Joints
ASTM E676-02(2007) Standard Specification for Interchangeable Taper-Ground Joints
ASTM D8131/D8131M-17 Standard Practice for Tensile Properties of Tapered and Stepped Joints of Polymer Matrix Composite Laminates

SAE - SAE International

SAE AS4444-1996 Fittings@ 24 Degree Cone Flareless@ Fluid Connection@ 5000 psi
SAE AS4510/1-1996 Fittings@ Weld to 24 Degrees Cone Flareless@ Fluid Connection
SAE AS4444/1-1996 Sleeve@ Bite Type@ 24° Cone Flareless Fitting
SAE AS4325A-1993 Fitting End@ Conical@ Standard Dimensions for@ Design Standard
SAE MA2113C-2017 ADAPTER - PORT CONNECTION RING LOCKED TO 60° CONE FITTING
SAE MA2112C-2017 ADAPTER - PORT CONNECTION RING LOCKED TO 24° CONE FITTING
SAE AS18280 SUP 1A-2007 Fittings@ 24° Cone Flareless@ Fluid Connection@ 3000 psi (Supplement 1)
SAE AS18280 SUP 1-2006 Fittings@ 24° Cone Flareless@ Fluid Connection@ 3000 psi (Supplement 1)

AENOR

UNE 43302:1982 INTERCHANGEABLE CONICAL GROUND GLASS JOINTS
UNE-EN 10226-2:2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation

GSO

GSO ISO 7755-12:2013 Hardmetal burrs -- Part 12: Inverted cone burrs (style N)

IT-UNI

UNI 5211-1970 Forged iron threaded connecting pipes for gas pipes, flat seat pipe joints; flat seat male joints and internal joints; tapered seat pipe joints; tapered seat public joints and internal joints. Malleable iron threaded connection pipes for pipes
UNI 754-1938 With high cover bell head riveted
UNI 3089-1960 Milling machine tapered spindle head
UNI 5212-1970 Forgeable iron threaded connecting pipes for gas pipes. Elbows with flat seat pipe joints; elbows with flat seat male joints; elbows with tapered seat pipe joints; elbows with tapered seat male joints

US-FCR

FCR FED CS21-58-1958 INTERCHANGEABLE TAPER-GROUND JOINTS, STOPCOCKS, STOPPERS, AND SPHERICAL-GROUND JOINTS

IN-BIS

IS 5165-1969 Specification for interchangeable tapered ground glass joints

RO-ASRO

STAS SR ISO 9181:1994 Tools for pressing-Round punches with 60° conical head and reduced shank
STAS 7381-1981 Tapers for tools 7: 21 TAPER Dimensions

CZ-CSN

CSN 02 7014-1975 Tapered piston pressure rings with higher tangencial force
CSN 02 2157-1965 Taper pins with a head

GOST

GOST R 50222-1992 Laboratory glassware. Interchangeable conical ground

NL-NEN

NEN 3272-1980 Laboratory glassware - Interchangeable conical joints

YU-JUS

JUS M.B1.852-1984 Union nuts, for taper bush type tube unions for buttjoints. Shape and dimensions
JUS M.B6.950-1987 Pneumatic tubing. Taper bush type tube unions for buttjoints. Shape and dimensions
JUS M.B6.952-1987 Pneumatic tubing. Taper bush type tube unions for buttjoints. Shape and dimensions
JUS M.B6.949-1985 Pneumatic tubing. Taper bush type tube unions for butt joints. Shape and dimensions
JUS M.B6.953-1987 Pneumatic tubing. Taper bush type tube unions for buttjoints. Shape and dimensions
JUS M.B6.955-1989 Pneurnatic tubing. Reducing taper bush type unions for butt joints, Shape and dimensions
JUS M.B6.951-1987 Pneumatic tubing. Taper bush type tube unions for butt/oints. Shape and dimensions
JUS M.B6.954-1989 Pneumatic tubing. Reducing taper bush type tube unions for butt joints. Shape and dimensions
JUS M.B6.957-1989 Pneumatic tubing. Taper bush type tube unions for buttjoints. Extended elbom. Shape and dimensions

Lithuanian Standards Office

LST EN 10226-2-2005 Pipe threads where pressure tight joints are made on the threads - Part 2: Taper external threads and taper internal threads - Dimensions, tolerances and designation

BE-NBN

NBN R 01-028-1979 Road vehicles - High pressure pipe fittings with 60° female cone

Canadian Standards Association (CSA)

CSA Z5356-1-08-CAN/CSA-2008 Anaesthetic and respiratory equipment ?Conical connectors ?Part 1: Cones and sockets First Edition

WRC - Welding Research Council

BULLETIN 414-1996 A NEW DESIGN CRITERION BASED ON PRESSURE TESTING OF TORISPHERICAL HEADS

CEN - European Committee for Standardization

EN ISO 4797:2004 Laboratory glassware - Boiling flasks with conical ground joints

Others: conical joint