Standardize the calibration and use of alcohol testing equipment

Standardize the calibration and use of alcohol testing equipment, Total:73 items.

The international standard classification for "Standardize the calibration and use of alcohol testing equipment" includes: Optics and optical measurements , Astronomy. Geodesy. Geography , Protective equipment , Geology. Meteorology. Hydrology , Occupational safety. Industrial hygiene .

The Chinese standard classification for "Standardize the calibration and use of alcohol testing equipment" includes: Chemical Measurement , Length Measurement , Time and Frequency Measurement , Radio Measurement , Optical Measurement , Photogrammetry and Remote Sensing , Telescope, geodetic survey and aerial survey instrumentation , Hygiene, safety and labor protection , Safety requirements on protection equipment , Basic standards and general methods , Meteorology .

National Metrological Verification Regulations of the People's Republic of China

JJG 138-1986 Verification Regulation of Precision Capacitanle Measuring Instrument Type CCJ -1C
JJG(铁道) 165-1997 Verification Regulations for Electrical Dynamometer
JJG 967-2001 Verification Regulation of Calibrators for Headlamp Tester of Motor Vehicle
JJG(煤炭) 02-1996 Verification Regulation of Measuring Apparatus for Calibration of Mine Airspeed Measuring Instrument
JJG(石油) 21-1996 Verfication Regulation of Geophone Tester
JJG(煤炭) 06-1996 Verification Regulation of The Measure for Interference Type Methane Measuring Device
JJG(烟草)23.3-2009 Measurement and Verification Regulations for Dedicated Testing Instruments for Threshing Tobacco Leaf Part 3: Measuring Instrument for Leaf Stems
JJG 525-2002 Verification Regulation of Wedge-feet Calibrator for Micrometers
JJG 657-2006 Verification Regulation of Detector for Alcoholic Quantity from Breathing-out Gas
JJG(轻工) 83-1991 Verification Regulations for BMP-2 Quartz Clock Instrument Accuracy Calibrator
JJG(烟草) 23.3-2009 Verification Regulation of Detecting Instrument for Threshed Tobacco-Part 3:Stem Tester
JJG 44-1986 Verification Regulation of Calibrator for Minimeter
JJG 1119-2015 Verification Regulation of Load Measuring Instrument for Weighing Apparatus
JJG 657-1990 Detector for Alcoholic Quantity from Breathing-out Gas
JJG 953-2000 Precision Time Interval Meter
JJG(邮电) 014-1992 Verification Regulation of the Telegram Signal Tester
JJG 967-2015 Calibrators for Headlamp Tester of Motor Vehicle
JJG(邮电) 034-1995 Verification Regulation of Precision Time Interval Meter
JJG(电子) 310006-2006 Specification for verification of noise detectors for particle collision of devices
JJG 1040-2008 Digital Measuring Device for Optical Interference Methane Detector
JJG 525-2014 Verification Regulation of Wedge-feet Calibrator for Micrometers

Professional Standard - Surveying and Mapping

CH 8017-1999 Verification regulation for the general accuracy of aerophogrammetric instruments
CH 8001-1991 Specification on calibration of electro - Optial distance measuring instrument

Professional Standard-Safe Production

AQ 1029-2019 Application and management standard for coal mine safety monitoring system and detector
AQ/T 1029-2007 Coal mine safety monitoring system and testing instrument use management specification
AQ 1029-2007 Application and management standard for coal mine safety monitoring system and detector

Group Standards of the People's Republic of China

T/GZZH 006-2023 Instructions for use of indoor air pollution on-site detection instruments
T/CCSAS 015-2022 Code for safe use and maintenance of gas detector
T/CSMT YB001-2022 Micro-vibration test specification for precision instrument use environment
T/JAS 24-2024 Inspection body and laboratory-Spectification for Verification and Calibration of Instruments and Equipment

Professional Standard - Electron

SJ 20240-1993 Verification regulation of model HP4284A LCR precise measurement instruments

Professional Standard - Machinery

JB/T 5996-1992 Roundness Measurement Assessment of Accuracy of Three-point Measuring Method and the Measurement Instrument Used

National Metrological Technical Specifications of the People's Republic of China

JJF 1822-2020 Calibration Specification for Urea Analyzers of Water Sample Detection

Professional Standard - Meteorology

QX/T 73-2007 Verification Regulation of Anemometer for Wind Farm

Professional Standard - Navy

HJB 249.4-2001 Verification regulations for special test equipment for torpedoes Verification regulations for special test equipment for fish 3B B2038.00D TS2 Overall circuit relay and program power supply controller inspection instrument

Professional Standard - Petroleum

SY 6503-2000 Regulation for using combustible gas detection and alarm instruments

Professional Standard - Electricity

DL/T 1787-2017 Calibration specification of relative dissipation factor and capacitance tester

Anhui Provincial Standard of the People's Republic of China

DB3418/T 025-2022 Specifications for installation and management of instruments and equipment for inspection and testing institutions

Liaoning Provincial Standard of the People's Republic of China

DB21/T 2612-2016 Specifications for performance testing of meteorological wind speed observation instruments

HU-MSZT

MSZ 9457-1982 Wine alcohol content testing using MALLIGAND equipment
MSZ 6134-1982 Optical instrument accuracy requirements and testing
MSZ 8880/2.lap-1963 Electrical product testing tools and testing methods. Use instruments
MSZ 18222/5-1980 Audiometric instruments. Automatically run standardized instrument supplementary testing

RU-GOST R

GOST 9459-1987 Gauges for bevel gears and gear pairs. Types. Basic parameters. Accuracy limits
GOST 5368-1981 Cylindrical gear checking machines. Types. Basic parameters. Accuracy limits
GOST 10387-1981 Measuring machines for checking fine pitch spur gears. Types. Basic dimensions, standards of accuracy

German Institute for Standardization

DIN 53245:1994 Solvents for paints and varnishes; alcohols; supply specification, further properties and methods of test
DIN 51756-7:1986 Testing of gasolines; determination of knock characteristics (octane number) of alcohols and alcohol/fuel mixtures using the CFR engine
DIN EN 50436-1:2006 Alcohol interlocks - Test methods and performance requirements - Part 1: Instruments for drink-driving-offender programs; German version EN 50436-1:2005

British Standards Institution (BSI)

BS EN 50436-1:2014 Alcohol interlocks. Test methods and performance requirements. Instruments for drink-driving-offender programs

BE-NBN

NBN C 73-335-01 ADD 5-1994 Safety of household appliances and similar instruments, special regulations on classification and testing of instruments used in the field of EN 60335-1
NBN C 73-704-1-1984 Regulations regarding the use of household electrical appliances, similar appliances and accessories, and the atmospheric noise generated by household electrical appliances and similar appliances

International Organization for Standardization (ISO)

ISO/ASTM 51538:2002 Practice for use of the ethanol-chlorobenzene dosimetry system

Association Francaise de Normalisation

NF A09-321:1988 Non destructive testing. Ultrasonic testing. Methods for specifying ultrasonic apparatus.
NF X20-710-1*NF EN 50436-1:2014 Alcohol interlocks - Test methods and performance requirements - Part 1 : instruments for drink-driving-offender programs
NF X20-710-1:2006 Alcohol interlocks - Test methods and performance requirements - Part 1 : instruments for drink-driving-offender programs.

AGMA - American Gear Manufacturers Association

97FTM1-1997 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears
931-A02-2002 Calibration of Gear Measuring Instruments and Their Application to the Inspection of Product Gears

Lithuanian Standards Office

LST EN 50436-1-2014 Alcohol interlocks - Test methods and performance requirements -- Part 1: Instruments for drink-driving-offender programs

SCC

BS PD ISO/TR 230-11:2018 Test code for machine tools-Measuring instruments suitable for machine tool geometry tests
CEI EN 50436-2:2015 Alcohol interlocks - Test methods and performance requirements Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use
CEI EN 50436-2/A1:2015 Alcohol interlocks - Test methods and performance requirements Part 2: Instruments having a mouthpiece and measuring breath alcohol for general preventive use
AS 2083:1977 Calibration blocks and their methods of use in ultrasonic testing
AS 2083:1981 Calibration blocks and their methods of use in ultrasonic testing
VDI/VDE 2617 BLATT 11-2011 Accuracy of coordinate measuring machines — Parameters and their testing — Determination of the uncertainty of measurements on coordinate measuring machines by measurement uncertainty balances
VDI/VDE 2617 BLATT 10.1-2014 Accuracy of coordinate measuring machines — parameters and their testing — laser trackers with multi-sensor technology

RO-ASRO

STAS 4640/3-1974 INDICATING ELEGTRICAL MEASURING INSTRUMENTS AND THEIR AGGESSORIES Rulcs and methods for inspection

American Society for Testing and Materials (ASTM)

ASTM D6318-24 Standard Practice for Calibrating a Fathometer Using a Bar Check Method

SE-SIS

SIS SS IEC 231:1983 Nuclear instrumentation - General principles of nuclear reactor instrumentation
SIS SS IEC 232:1983 Nuclear instrumentation - General characteristics of nuclear reactor instrumentation

Association of German Mechanical Engineers

VDI/VDE 2629 Blatt 2-2012 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces

VDI - Verein Deutscher Ingenieure

VDI/VDE 2629 Blatt 2-2008 Accuracy of contour-measuring systems - Characteristics and their checking - Determination of the uncertainty of specific contour measurements using standards/calibrated workpieces

Korean Agency for Technology and Standards (KATS)

KS B 5648-2002 Pressure test method and vacuum vessel leak detection methodusing mass spectrometer

Others: