Viscosity test method reference

Viscosity test method reference, Total:234 items.

The international standard classification for "Viscosity test method reference" includes: Measurement of volume, mass, density, viscosity , Chemical analysis of metals , Laboratory medicine , Medical Sciences and health care facilities in general , Footwear .

The Chinese standard classification for "Viscosity test method reference" includes: Material composition analysis instrument and environment detection instrument in general , Metal physical property test method , Physical property analyzer , Sanitation in general , Clothing, footgear and headwear in general , Technical Management .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3789.21-1991 Measurements of the electrical properties of transmitting tubes-Measuring methods of static characteristic reference point
GB/T 10247-1988 Methods for measurement and test of the viscosity
GB/T 13387-1992 Test method for measuring flat length on slices of electronic materials
GB/T 10247-2008 Methods of viscosity measurement

国家卫生计生委

WS/T 493-2017 Guide to the estimation of the measurement uncertainty of reference methods in enzymology reference laboratiories

National Health Commission of the People's Republic of China

WST 349:2011 Reference method for determination of α-amylase catalytic activity concentration
WST 361:2011 Reference method for determination of catalytic activity concentration of lactate dehydrogenase
WST 341:2011 Hemoglobin measurement reference method

中华人民共和国国家卫生和计划生育委员会

WS/T 349-2011 Reference procedure for the measurement of catalytic activity concentration of α-amylase

Professional Standard - Military and Civilian Products

WJ 47-2006 Nitrocellulose test method Viscosity viscometer method

Professional Standard - Hygiene

WS 341-2011 Reference method for hemoglobin determination
WS/T 345-2011 Reference procedure of the measurement of urea in serum
WS/T 361-2011 Reference procedure for the measurement of catalytic activity concentration of lactate dehydrogenase
WS/T 351-2011 Reference procedure for the measurement of catalytical activity concentration of alkaline phosphatase (ALP)
WS/T 350-2011 Reference procedure of the measurement of glucose in serum
WS/T 341-2011 Reference method for haemoglobinometry in human blood
WS 342-2011 Reference method for hematocrit determination

未注明发布机构

DIN EN 13286-5 E:1998-10 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table
DIN EN 480-15 E:2011-10 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
DIN EN 13286-2 E:1998-10 Unbound and hydraulically bound mixtures.Part 2: Test methods for laboratory reference density and water content - Proctor compaction
ASTM RR-D04-1036 2011 D7496-Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer
ASTM RR-D04-1035 2011 D7496-Test Method for Viscosity of Emulsified Asphalt by Saybolt Furol Viscometer

Professional Standard - Energy

NB/T 20292-2014 Test method for determination of reference temperature|| T0|| for ferritic steels in the ductile-to-brittle transition range for nuclear power plants
NB/T 20292-2023 Test method for reference temperature T0 in the ductile-brittle transition zone of ferritic steel for nuclear power plants

Professional Standard - Chemical Industry

HG/T 3323-1982 Method for Determination of Rubber Slurry Viscosity (Rotary Viscometer Method)
HG 5-1340-1980 Low viscosity phenolic resin viscosity test method
HG 5-1339-1980 Viscosity Test Method for High Viscosity Phenolic Resins

Professional Standard - Commodity Inspection

SN/T 1665-2005 Test method for peeling strength of sole adhesive bonds of shoes

Professional Standard - Electron

SJ/T 11040-1996 Test method for viscosity of electronic glass at high temperature

GSO

GSO ISO 7884-1:2010 Glass -- Viscosity and viscometric fixed points -- Part 1: Principles for determining viscosity and viscometric fixed points
GSO ISO 7884-3:2010 Glass -- Viscosity and viscometric fixed points -- Part 3: Determination of viscosity by fibre elongation viscometer
GSO ISO 7884-4:2010 Glass -- Viscosity and viscometric fixed points -- Part 4: Determination of viscosity by beam bending
GSO ISO 7884-2:2010 Glass -- Viscosity and viscometric fixed points -- Part 2: Determination of viscosity by rotation viscometers
GSO ISO 7884-5:2010 Glass -- Viscosity and viscometric fixed points -- Part 5: Determination of working point by sinking bar viscometer
GSO ISO 7884-6:2010 Glass -- Viscosity and viscometric fixed points -- Part 6: Determination of softening point
BH GSO EN 480-15:2022 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
GSO EN 480-15:2021 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
GSO ISO 7884-8:2010 Glass -- Viscosity and viscometric fixed points -- Part 8: Determination of (dilatometric) transformation temperature
BH GSO ISO 279:2016 Essential oils -- Determination of relative density at 20 degrees C -- Reference method
OS GSO ISO 279:2015 Essential oils -- Determination of relative density at 20 degrees C -- Reference method
GSO ISO 279:2015 Essential oils -- Determination of relative density at 20 degrees C -- Reference method
GSO ISO 5764:2015 Milk -- Determination of freezing point -- Thermistor cryoscope method (Reference method)
OS GSO ISO 6091:2015 Dried milk -- Determination of titratable acidity (Reference method)
GSO ISO 6091:2015 Dried milk -- Determination of titratable acidity (Reference method)
GSO ISO 9653:2013 Adhesives - Test method for shear impact strength of adhesive bonds
OS GSO ISO 9653:2013 Adhesives - Test method for shear impact strength of adhesive bonds

SCC

AS/NZS 1080.2.2:1998 Timber - Methods of test, Method 2.2: Slope of grain by reference to surface checks
DANSK DS/EN 480-15:2013 Admixtures for concrete, mortar and grout – Test methods – Part 15: Reference concrete and method for testing viscosity modifying admixtures
NS-EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
AENOR UNE-EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
AS 1816.3:2002 Metallic materials - Brinell hardness test, Method 3: Calibration of reference blocks
DIN EN 480-15 E:2011 Draft Document - Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures; German version prEN 480-15:2011
BS 5350-B8:1977 Methods of test for adhesives-Determination of viscosity
NS-EN 13286-4:2021 Unbound and hydraulically bound mixtures – Part 4: Test methods for laboratory reference density and water content – Vibrating hammer
NS-EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer
NS-EN 13286-3:2003 Unbound and hydraulically bound mixtures — Part 3: Test methods for laboratory reference density and water content — Vibrocompression with controlled parameters
DANSK DS/EN 13286-2:2011 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
DANSK DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
AENOR UNE 80228 EX:1988 Cement testing methods. Chemical analysis: determination of titanium content by colorimetry. Reference method.
ETSI TR 103 119:2020 Methods for Testing and Specification (MTS); The Test Description Language (TDL); Reference Implementation
BS 4401-1:1980 Methods of test for meat and meat products-Determination of ash (reference method)
AASHTO T 72-2022 Standard Method of Test for Saybolt Viscosity
AS Z24.3.3:1968 Methods of test for pressure sensitive adhesive tapes, Method 3.3: Adhesion strength - Quickstick
DANSK DS/EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
NS-EN 302-7:2023 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
NS-EN 302-7:2013 Adhesives for load-bearing timber structures — Test methods — Part 7: Determination of the working life under referenced conditions
BS 4401-6:1981 Methods of test for meat and meat products-Determination of chloride (reference method)
DANSK DS/EN ISO 9653:2000 Adhesives - Test method for shear impact strength of adhesive bonds
DANSK DS/CEN/CR 14377:2002 Air quality - Approach to uncertainty estimation for ambient air reference measurement methods
AS Z24.3.1:1968 Methods of test for pressure sensitive adhesive tapes, Method 3.1: Adhesion strength - Adhesion strength
SN-CR 14377:2002 Air quality — Approach to uncertainty estimation for ambient air reference measurement methods
UNE 80228:1988 EX TESTING METHODS FOR CEMENTS. CHEMICAL ANALYSIS. DETERMINATION OF TITANIUM CONTENT. COLORIMETRIC METHOD. REFERENCE METHOD

American Society for Testing and Materials (ASTM)

ASTM D1084-97 Standard Test Methods for Viscosity of Adhesives
ASTM D1084-97(2005) Standard Test Methods for Viscosity of Adhesives
ASTM E1921-22 Standard Test Method for Determination of Reference Temperature, T 0 , for Ferritic Steels in the Transition Range
ASTM E1921-20 Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-19 Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-17a Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-17 Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-09c Standard Test Method for Determination of Reference Temperature, T _o , for Ferritic Steels in the Transition Range
ASTM E1921-21a Standard Test Method for Determination of Reference Temperature, T 0 , for Ferritic Steels in the Transition Range
ASTM E1921-19a Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-19be1 Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-18 Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-18a Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-19b Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-09a Standard Test Method for Determination of Reference Temperature, T _o , for Ferritic Steels in the Transition Range
ASTM E1921-12 Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM E1921-13 Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM D4212-99 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D1200-10 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D4212-99(2005) Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM E3116-23 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D4212-10 Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D1200-94(2005) Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D88-81(1987)e1 Standard Test Method for Saybolt Viscosity
ASTM D1368-89 Test Method for Trace Concentrations of Lead in Primary Reference Fuels
ASTM D88-56(1968) Standard Method Of Test For Saybolt Viscosity
ASTM D88-94(1999) Standard Test Method for Saybolt Viscosity
ASTM D88/D88M-07(2019)e1 Standard Test Method for Saybolt Viscosity
ASTM D3205-86(1991) Standard Test Method for Viscosity of Asphalt with Cone and Plate Viscometer
ASTM D5478-09 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM E3116-18 Standard Test Method for Viscosity Measurement Validation of Rotational Viscometers
ASTM D4212-16(2023) Standard Test Method for Viscosity by Dip-Type Viscosity Cups
ASTM D1200-23 Standard Test Method for Viscosity by Ford Viscosity Cup
ASTM D5478-98 Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D5478-98(2003) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer
ASTM D4287-00(2019) Standard Test Method for High-Shear Viscosity Using a Cone/Plate Viscometer
ASTM E1921-15 Standard Test Method for Determination of Reference Temperature, T o , for Ferritic Steels in the Transition Range
ASTM D5478-13(2022) Standard Test Methods for Viscosity of Materials by a Falling Needle Viscometer

German Institute for Standardization

DIN EN 480-15:2013-06 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures; German version EN 480-15:2013 / Note: To be replaced by DIN EN 480-15 (2021-12).
DIN EN 480-15:2021-12 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures; German and English version prEN 480-15:2021 / Note: Date of issue 2021-11-12*Intended as replacement for DIN E...
DIN EN 480-15:2023 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
DIN EN 13286-4:2022-02 Unbound and hydraulically bound mixtures - Part 4: Test methods for laboratory reference density and water content - Vibrating hammer; German version EN 13286-4:2021
DIN EN 480-15:2021 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures; German and English version prEN 480-15:2021
DIN 10450:1983-03 Determination of free acidity of caseins; reference method
DIN 58924:2009 Haemostaseology - Reference method for the determination of the collagen binding acitvity of the VWF; Text in German and English
DIN 4882:2023-12 Non-destructive testing - Electromagnetic test methods - Reference blocks for grinding burns testing
DIN 4882:2023-06 Non-destructive testing - Electromagnetic test methods - Reference blocks for grinding burns testing / Note: Date of issue 2023-05-19*Intended as replacement for DIN SPEC 4882 (2016-11).
DIN CEN/TS 17638:2021-09 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method; German version CEN/TS 17638:2021
DIN EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5: Test methods for laboratory reference density and water content; Vibrating table; German version EN 13286-5:2003
DIN EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters; German version EN 13286-3:2003
DIN EN 302-7:2023-05 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions; German version EN 302-7:2023
DIN EN 302-7:2023 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

European Committee for Standardization (CEN)

EN 480-15:2023 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
EN 13286-3:2003 Unbound and hydraulically bound mixtures - Part 3: Test methods for laboratory reference density and water content; Vibrocompression with controlled parameters
EN 13286-2:2010 Unbound and hydraulically bound mixtures - Part 2: Test methods for laboratory reference density and water content - Proctor compaction
PD CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method
EN 302-7:2023 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions
prEN 302-7-2021 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

ES-UNE

UNE-EN 480-15:2024 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
UNE-CEN/TS 17638:2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method (Endorsed by Asociación Española de Normalización in August of 2021.)
UNE-EN 302-7:2023 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

AENOR

UNE-EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
UNE 34848:1986 DRIED MILK. DETERMINATION OF TITRATABLE ACIDITY. REFERENCE METHOD.
UNE 84156:2000 Essential oils. Determination of relative density at 20aC. Reference method.
UNE-EN 29009:1995 GLASS CONTAINERS. HEIGHT AND NON-PARALLELISM OF FINISH WITH REFERENCE TO CONTAINER BASE. TEST METHODS. (ISO 9009:1991).
UNE-EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

Danish Standards Foundation

DS/EN 480-15:2013 Admixtures for concrete, mortar and grout - Test methods - Part 15: Reference concrete and method for testing viscosity modifying admixtures
DS/CEN/TS 17638:2021 Stationary source emissions – Manual method for the determination of the mass concentration of formaldehyde – Reference method
DS/EN 302-7:2013 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

IN-BIS

IS 11964-1987 Method for determination of free acidity in casein (reference method)

Korean Agency for Technology and Standards (KATS)

KS H ISO 279-2019 Essential oils — Determination of relative density at 20 degrees C — Reference method
KS H ISO 6091-2006(2016) Dried milk -- Determination of titratable acidity(Reference method)
KS M 5452-1984 Testing methods for viscosity of paint
KS H ISO 279-2014(2019) Essential oils — Determination of relative density at 20 degrees C — Reference method
KS B 0533-1995 Methods for measurement on ultrasonic velocity of solid by pulse technique using reference test pieces
KS M 3723-1987 Testing methods for flexural strength of adhesives
KS M 3723-2003(2013) Testing methods for flexural strength of adhesives
KS F 2218-1985 Testing methods for bonding strength of wall boards adhesives
KS F 2217-1985 Testing methods for bonding strength of ceiling board adhesives
KS B 0533-2013 Methods for measurement on ultrasonic velocity of solidby pulse technique using reference test pieces
KS F 2218-2020 Testing methods for bonding strength of wall boards adhesives
KS F 2217-2020 Testing methods for bonding strength of ceiling board adhesives
KS M 2014-2015 Testing methods for kinematic viscosity and calculating method for viscosity index of crude oil and petroleum products
KS F 2217-2009 Testing methods for bonding strength of ceiling board adhesives
KS H ISO 6091:2021 Dried milk — Determination of titratable acidity(Reference method)
KS F 2218-2009 Testing methods for bonding strength of wall boards adhesives
KS F 2216-2000 TESTING METHODS FOR BONDING STRENGTH OF ANCHORING WOODEN BLOCK ADHESIVES

International Dairy Federation (IDF)

IDF 91-2008 Caseins - Determination of free acidity (Reference method)

British Standards Institution (BSI)

BS ISO 279:1998(2001) Essential oils — Determination of relative density at 20 ºC — Reference method
BS ISO 5547:2008 Caseins - Determination of free acidity (Reference method)
BS EN 13286-4:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating hammer
BS EN 13286-5:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrating table
21/30442373 DC BS EN 480-15. Admixtures for concrete, mortar and grout. Test methods. Part 15. Reference concrete and method for testing viscosity modifying admixtures
BS EN 13286-3:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Vibrocompression with controlled parameters
BS EN 12697-9:2002 Bituminous mixtures - Test methods for hot mix asphalt - Determination of the reference density
BS EN 13286-2:2010(2012) Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 13286-2:2004 Unbound and hydraulically bound mixtures - Test methods for the determination of the laboratory reference density and water content - Proctor compaction
BS EN 13286-2:2010 Unbound and hydraulically bound mixtures. Test methods for laboratory reference density and water content. Proctor compaction
BS EN 302-7:2023 Adhesives for load-bearing timber structures. Test methods. Determination of the working life under referenced conditions
BS EN 480-15:2023 Admixtures for concrete, mortar and grout — Test methods Part 15 : Reference concrete and method for testing viscosity modifying admixtures
BS 5350-B8:1990 Methods of test for adhesives - Adhesives - Determination of viscosity
BS 4401-2:1980 Methods of test for meat and meat products. Determination of nitrogen content (reference method)
BS PD CEN/TS 17638:2021 Stationary source emissions. Manual method for the determination of the mass concentration of formaldehyde. Reference method
BS EN 302-5:2023 Adhesives for load-bearing timber structures. Test methods. Determination of maximum assembly time under referenced conditions
BS 4401-3:1997 Methods of test for meat and meat products. Determination of moisture content (reference method)
BS EN 1052-5:2005 Methods of test for masonry - Determination of bond strength by the bond wrench method
BS EN 302-6:2023 Adhesives for load-bearing timber structures. Test methods. Determination of the minimum pressing time under referenced conditions
BS EN 13286-1:2003 Unbound and hydraulically bound mixtures - Test methods for laboratory reference density and water content - Introduction, general requirements and sampling

International Organization for Standardization (ISO)

ISO 5547:2008 | IDF 91:2008 Caseins — Determination of free acidity (Reference method)
ISO/TS 17193:2011 Milk - Determination of the lactoperoxidase activity - Photometric method (Reference method)
ISO 6091:2010 | IDF 86:2010 Dried milk — Determination of titratable acidity (Reference method)

Association Francaise de Normalisation

NF ISO 5547:2008 Caseins - Determination of free acidity (Reference method)
NF ISO 279:1999 Essential oils - Determination of relative density at 20 degrees Celsius - Reference method
NF EN 302-7:2023 Adhesives for supporting wooden structures - Test methods - Part 7: determination of service life under reference conditions
NF P98-846-4*NF EN 13286-4:2003 Unbound and hydraulically bound mixtures - Part 4 : test methods for laboratory reference density and water content - Vibrating hammer
NF P98-846-5*NF EN 13286-5:2003 Unbound and hydraulically bound mixtures - Part 5 : test methods for laboratory reference density and water content - Vibrating table
NF EN 13286-4:2021 Mixtures treated and mixtures not treated with hydraulic binders - Test method for laboratory determination of reference density and water content - Part 4: vibrating hammer
NF V04-386:1985 Caseins. Determination of free acidity (reference method).
NF V04-349:1985 Dried milk. Determination of titratable acidity (reference method).

GM Daewoo

GMKOREA EDS-T-7713-2012 Method of Testing the Adhesion Strength of Adhesives ???? ???? ???? Version 3; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by GMW3371 [Replaced: GMKOREA EDS-T-7713]

YU-JUS

JUS ISO 279:1992 Essential oils. Determination of relative density at 20 degree C (Reference method)
JUS B.H3.010-1987 Reference fluids for viscosimeters calibration. Classification and specification
JUS N.R1.471-1985 Bipolar transistors. Reference methods of measurement

DIN

DIN EN 13286-2:2004 Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction

AT-ON

ONORM DIN 10337-1-1993 Determination of Phosphatase activity of milk - Reference method
ONORM C 9435-3-1994 Testing of elastomers - Determination of resistance to ozone cracking - Determination of the concentration of ozone (Reference method)
OENORM EN 302-7-2021 Adhesives for load-bearing timber structures - Test methods - Part 7: Determination of the working life under referenced conditions

GOSTR

GOST R 58767-2019 Mortars. Test methods using reference specimens

CZ-CSN

CSN 67 3016-1981 Paints and varnishes. Test method of viscosity by rotatory viscometer
CSN 01 1616-1989 Noise. Reference sound source. Technical conditions and testing methods
CSN ISO 2917:1994 Meat and meat products-Measurement of pH(Reference method)

CEN - European Committee for Standardization

EN 13286-2:2004 Unbound and hydraulically bound mixtures - Part 2: Test methods for the determination of the laboratory reference density and water content - Proctor compaction

BR-ABNT

ABNT P-MB-326-1963 Test method for product saybolt viscosity testing
ABNT MB-293-1962 Test methods for kinematic viscosity testing

Indonesia Standards

SNI 06-6440-2000 Test methods for viscosity of asphalts by vacuum capillary viscometer

Japanese Industrial Standards Committee (JISC)

JIS K 6862:1984 Testing methods for melt viscosity of hot-melt adhesives

ZA-SANS

SANS 479:2006 Milk and milk products - Determination of copper content - Photometric method (Reference method)

AASHTO - American Association of State Highway and Transportation Officials

T 72-2010 Standard Method of Test for Saybolt Viscosity
TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
T 316-2010 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2006 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
T 316-2011 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer

IT-UNI

UNI CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method

Lithuanian Standards Office

LST CEN/TS 17638-2021 Stationary source emissions - Manual method for the determination of the mass concentration of formaldehyde - Reference method

The American Road & Transportation Builders Association

AASHTO T 72-2010 Standard Method of Test for Saybolt Viscosity
AASHTO T 361-2022 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
AASHTO TP 91-2015 Standard Method of Test for Determining Asphalt Binder Bond Strength by Means of the Binder Bond Strength (BBS) Test
AASHTO T 72-2010(R2019) Standard Method of Test for Saybolt Viscosity
AASHTO T 316-2022 Standard Method of Test for Viscosity Determination of Asphalt Binder Using Rotational Viscometer
AASHTO T 202-2015 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer
AASHTO T 202-2003 Standard Method of Test for Viscosity of Asphalts by Vacuum Capillary Viscometer

Standard Association of Australia （SAA）

AS 6091:2023 Dried milk — Determination of titratable acidity (Reference method) (ISO 6091:2010, MOD)

National Electrical Manufacturers Association（NEMA)

NEMA C82.6-1985 Reference Ballasts for High-Intensity-Discharge Lamps - Methods of Measurement R(1996)

PT-IPQ

NP 2215-1986 plastic material. Film and sheet, width measurement. Reference method

SAE - SAE International

SAE AIR6282-2015 Fiber Optic Harsh Environment Test Methods Cross Reference Document

ETSI - European Telecommunications Standards Institute

TR 103 119-2018 Methods for Testing and Specification (MTS); The Test Description Language (TDL); Reference Implementation (V1.1.1)

Society of Automotive Engineers (SAE)

SAE AIR6282A-2021 Fiber Optic Harsh Environment Test Methods Cross Reference Document

RU-GOST R

GOST 14340.5-1978 Enamelled round wires. Method of bonding strength test
GOST 1929-1987 Petroleum products. Methods of test for determination of dynamic viscosity by rotary viscosimeter

KR-KS

KS H ISO 5547-2021 Caseins — Determination of free acidity(Reference method)
KS H ISO 6091-2021 Dried milk — Determination of titratable acidity(Reference method)

RO-ASRO

SR 5546-1997 Caseins and caseinates - Determination of pH (Reference method)