American standard keyway

American standard keyway, Total:202 items.

The international standard classification for "American standard keyway" includes: Couplings , Keys and keyways, splines , Milling tools , Machine tools in general , Tools for planing and broaching machines .

The Chinese standard classification for "American standard keyway" includes: Chain drive, belt drive and key joint , Cutting tools , Combination grippers , Machine tool assistive device and accessory .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 1127-1997 Cutters for woodruff keyseats
GB/T 1112.1-1997 drills - Part 1: Milling cutters with parallel shanks. Dimensions
GB/T 1127-2007 Woodruff keyseat cutters
GB/T 1112-2012 Slot drills
GB/T 1098-2003 Woodruff keyways
GB/T 16922-1997 Thin taper keys and their corresponding keyways
GB/T 1566-2003 Square and Rectangular thin keyways
GB/T 14329-2008 Keyway broaches
GB/T 1112.2-1997 drills - Part 2: Milling cutters with Morse taper shanks. Dimensions
GB/T 1563-2003 Taper keys - Cross section dimensions of keys and keyways
GB/T 1095-2003 Square and rectangular keyways
GB/T 1563-2017 Taper keys-Cross section dimensions of keyways
GB/T 1127-2023 Woodruff keyseat cutters
GB/T 1974-1980 Tangential keys and keyways
GB/T 1974-2003 Tangential keys and keyways
GB 1974-1980 Tangential key and its keyway

Taiwan Provincial Standard of the People's Republic of China

CNS 9570-1982 Thrust Rings with Keyway Dimensions
CNS 7194-2001 Single-start solid (monobloc) gear hobs with tenon drive or axial keyway, modules 1 to 40-Nominal dimensions
CNS 175-1983 Tolerance of Key Slot for Taper and Flat Key

Professional Standard - Aviation

HB 1692-1987 Key Groove V-shaped Bearing
HB 1531-1987 Keyway Positioning Angle Iron
HB 3984-1987 Key Groove Reduced Board
HB 705-1979 Taper Shank Keyway Milling Cutter D=14~40mm
HB 1492-1987 Key Groove Reduced Board
HB 703-1979 Straight shank keyway milling cutter D=2~20mm
HB 753-1979 Keyway Milling Cutter Specifications
HB 1424-1987 Key Groove Reduced Board

Professional Standard - Machinery

JB/T 3411.24-1999 Washer for keyway broaching - Dimensions
JB/ZQ 4183-2006 Square double wedge key - Type and size of keys and keyway
JB/T 6191.1-1992 16mm groove system combination clamp assembly keyway folding plate
JB/T 5373.6-1991 8mm groove system combination clamp keyway folding plate
JB/T 3411.22-1999 Holder for keyway broach - Dimensions
JB/T 9993-2011 Keyway broachs with both side cutting

Society of Automotive Engineers (SAE)

SAE J503-2018 Woodruff Key Slots and Keyways
SAE J503-1959 Woodruff Key Slots and Keyways
SAE J503_201801 Woodruff Key Slots and Keyways
SAE J503_195905 Woodruff Key Slots and Keyways
SAE MA4189 SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC
SAE MA4189A SCREW, MACHINE, 100° CSK, FLAT HEAD, OFFSET CRUCIFORM RECESS, FULL SHANK, UNS S66286, MJ THREAD, METRIC

British Standards Institution (BSI)

BS 4235-2:1977 Specification for metric keys and keyways. Woodruff keys and keyways
BS 46-1:1958 Keys and keyways and taper pins - Specification - Keys and keyways
BS 46-1:1953 Keys and keyways
BS 46-1:1924 Parallel keys, keyways and key bars
BS 46-1:1958(2000) Specification for Keys and keyways
BS 46-1:1929 Keys and keyways and coned shaft ends
BS 4235-1:1967 Metric keys and keyways. Parallel and taper keys
BS 4235-1:1972 Specification for metric keys and keyways - Parallel and taper keys
BS 4235-1:1972(1999) Specification for Metric keys and keyways — Part 1 : Parallel and taper keys
BS ISO 12197:1997 Woodruff keyseat cutters - Dimensions
BS ISO 12197:1996 Woodruff keyseat cutters. Dimensions
BS ISO 12197:2016 Woodruff keyseat cutters. Dimensions

Austrian Standards

ONORM M 5462-1977 Keys and keyways Taper keys
ONORM M 5466-1978 Keys and keyways Tangential keys
ONORM M 5463-1977 Keys and keyways Taper keys with gib-head
ONORM M 5461 Teil.3-1968 Dieser Norm liegt die Arbeit des ISO/TC 16 zugrunde.
ONORM M 5461 Teil.1-1967 Dieser Norm liegt die Arbeit des ISO ITC 16 zugrunde.
ONORM M 5461 Teil.2-1968 Dieser Norm liegt die Arbeit des ISO/TC 16 zugrunde.

American Society of Mechanical Engineers (ASME)

ASME B17.1-1967(R2003) KEYS AND KEYSEATS
ASME B17.1-1967 KEYS AND KEYSEATS
ASME B17.1-1967(R2017) KEYS AND KEYSEATS
ASME B17.2-1967 Woodruff Keys and Keyseats Revision of USAS B17F-1930
ASME B17.2-1967(R2003) WOODRUFF KEYS and KEYSEATS
ASME B18.25.2M-1996(R2003) WOODRUFF KEYS AND KEYWAYS
ASME B18.25.2M-1996 Woodruff Keys and Keyways
ASME B18.25.2M-1996(R2008) Woodruff Keys and Keyways
ASME B18.25.1M-1996(R2008) Square and Rectangular Keys and Keyways
ASME B18.25.1M-1996(R2003) SQUARE AND RECTANGULAR KEYS AND KEYWAYS
ASME B18.25.1M-1996 Square and Rectangular Keys and Keyways
ASME B18.2.4.3M-1979(R2017) American slotted hexagon nuts

Canadian General Standards Board （CGSB)

CAN3-B232-1975(R2002) Keys, Keyseats and Keyways
CAN3-B232-1975(C2002) Keys, housings and keyways
CAN3 B232-1975(R2002) Keys, Keyseats and Keyways (CSA B232-1972)

Aerospace Industries Association

AIA NA 0139-1981 Keyway and Key Slot Dimensions Metric
AIA NASM35756-1998 Key, Wooddruff, Steel, Alloy, with Keyway and Key Slot Dimensions FSC 5315

American National Standards Institute （ANSI)

ANSI/ASME B17.1-1967 Keys and Keyseats
ANSI/ASME B18.25.2M-1996 Woodruff Keys & Keyways
ANSI/ASME B17.2-1967 Woodruff Keys and Keyseats
ANSI/ASME B18.25.1M-1996 Square and Rectangular Keys and Keyways

AIA/NAS - Aerospace Industries Association of America Inc.

NA0139-1981 Keyway and Key Slot Dimensions Metric
NASM35756-1998 Key@ Wooddruff@ Steel@ Alloy@ with Keyway and Key Slot Dimensions
NA0139-2012 KEYWAY AND KEY SLOT DIMENSIONS METRIC (Rev 1)
NASM35756-2011 KEY@ WOODRUFF@ STEEL@ ALLOY@ WITH KEYWAY AND KEY SLOT DIMENSIONS (Rev 1)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NA 0139-1981 Keyway and Key Slot Dimensions Metric
AIA/NAS NASM35756-2011 KEY, WOODRUFF, STEEL, ALLOY, WITH KEYWAY AND KEY SLOT DIMENSIONS (Rev 1)
AIA/NAS NA0139-2012 KEYWAY AND KEY SLOT DIMENSIONS METRIC (Rev 1)

RO-ASRO

STAS 1012-1977 WOODRUFF KEYS Keys and keyways
STAS 7439-1987 GAUGES FOR PARALLEL KEYWAYS AND WOODRUFF KEYWAYS Dimensions
STAS 431-1981 THIN TAPER KEYS AND KEY- WAYS Dimensions
STAS 1010-1980 TANGENTIAL KEYS AND KEYWAYS Dimensions
STAS 1007-1981 TAPER KEYS AND KEYWAYS Dimensions
STAS 1004-1981 PARALLEL KEYS AND KEYWAYS Dimensions
STAS 9501-1981 THIN PARALLEL KEYS AND KEYWAYS Dimensions
STAS 12933-1991 High parallel keys and keyways. Dimensions
STAS 9234-1973 CONGAVE TAPER KEY JOINTS Seclion of keys. and Lheir keyways Dimensions
STAS 7440-1987 GAUGES FOR PARALLEL KEYWAYS AND WOODRUFF KEYWAYS Manufacturing and wear tolerances
STAS 5257-1980 SHANK KEYWAY CUTTERS Dimensions
STAS 1011-1974 Tangential key joints for alternating and shock loads SECTIONS OF KEYS AND THEIR KEYWAYS

GM North America

GM GMY150-1988 Woodruff Keyslots and Keyways General Specifications

Japanese Industrial Standards Committee (JISC)

JIS B 1303:1976 Sliding keys and their corresponding keyways
JIS B 1301:1996 Keys and their corresponding keyways
JIS B 1302:1976 Woodruff keys and their corresponding keyways
JIS B 4238:1999 Keyway broaches
JIS B 4238:1988 Keyway broaches
JIS B 4230:1989 Woodruff keyseat milling cutters
JIS B 1301:1996 AMD 1:2009 Keys and their corresponding keyways (Amendment 1)
JIS B 4238:1999 AMD 1:2009 Keyway Broaches (Amendment 1)
JIS B 4230:1999 Milling cutters -- Woodruff keyseat cutters

Kingdom of Bahrain Testing and Metrology Directorate

BH GSO ISO 3912:2017 Woodruff keys and keyways
BH GSO ISO 3117:2017 Tangential keys and keyways

Korean Agency for Technology and Standards (KATS)

KS B 1312-2005(2015) Woodruff keys and keyways
KS B 1312-1985 Woodruff keys and keyways
KS B ISO 3117:2003 Tangential keys and keyways
KS B ISO 3117-2023 Tangential keys and keyways
KS B ISO 3117-2003(2018) Tangent key and keyway
KS B ISO 3117-2003(2023) Tangential keys and keyways
KS B 1311-2019 Keys and their corresponding keyways
KS B 1311-2024 Keys and their corresponding keyways
KS B ISO 2491:2003 Thin parallel keys and their corresponding keyways(Dimensions in millimeter)
KS B ISO 2491:2015 Thin parallel keys and their corresponding keyways(Dimensions in millimeter)
KS B 3280-1997 Keyway broaches
KS B 1311-2009(2024) Keys and their corresponding keyways
KS B 3280-1987 Keyway broaches
KS B 3280-2023 Keyway broaches
KS B 1313-2017 Sliding keys and their corresponding keyways
KS B 3280-1997(2022) Keyway broaches
KS B 3280-1997(2017) Keyway broaches
KS B 1313-2017(2022) Sliding keys and their corresponding keyways
KS B 1313-2022 Sliding keys and their corresponding keyways
KS B 3987-2004(2009) Woodruff keyseat milling cutters
KS B 3987-1982 Woodruff keyseat milling cutters
KS B 3987-1996 Woodruff keyseat milling cutters
KS B 3987-2004 Woodruff keyseat milling cutters
KS B ISO 2492:2003 Thin taper keys with or without gib head and their corresponding keyways (Dimensions in millimeters)
KS B 1311-2009(2019) Keys and their corresponding keyways
KS B ISO 2491-2003(2013) Thin parallel keys and their corresponding keyways(Dimensions in millimeter)
KS B ISO 2492-2003(2023) Thin taper keys with or without gib head and their corresponding keyways

The Directorate General of Specifications and Metrology (DGSM)

OS GSO ISO 3912:2015 Woodruff keys and keyways
OS GSO ISO 3117:2015 Tangential keys and keyways

International Organization for Standardization (ISO)

ISO 3912:1977 Woodruff keys and keyways
ISO 3117:1977 Tangential keys and keyways
ISO 1080:1975 Machine tools; Morse taper shanks; Cotter slots with taper keys
ISO 2491:1974 Thin parallel keys and their corresponding keyways (Dimensions in millimetres)
ISO 12197:2016 Woodruff keyseat cutters - Dimensions
ISO 12197:1996 Woodruff keyseat cutters - Dimensions
ISO/R 773:1969 Rectangular or square parallel keys and their corresponding keyways (Dimensions in millimetres)

Ente Nazionale Italiano di Unificazione

UNI 3916-1957 Milling cutters for metal mineral processing. American keyway milling cutter with cylindrical shank
UNI 4788-1964 lathe. T keyway
UNI EN 1218-1:2002 Safety of woodworking machines - Tenoning machines - Single end tenoning machines with sliding table
UNI 5530:1979 Machine tools. T-slot parallel keys.

IN-BIS

IS 2293-1974 GIB Head Key and Keyway Specifications
IS 2292-1974 Specification for tapered keys and keyways
IS 6166-1971 Specification for fine taper keys and keyways
IS 2048-1983 Parallel Keys and Keyways Specifications
IS 6167-1971 Specification for fine parallel keys and keyways

Danish Standards Foundation

DS 95:1933 Tangential keys and keyways for bidirectional torque. Shaft diameter and corresponding keyway section
DS 94:1933 Tangential keys and keyways for unidirectional torque. Shaft diameter and corresponding keyway section
DS/EN 3612:1997 Aerospace series - Undercuts for splines - Design standard

FI-SFS

SFS 2636-1969 Parallel keys and their corresponding keyways
SFS 2638-1969 Taper keys with gib head and their corresponding keyways
SFS 2637-1971 Taper keys without gib head and their corresponding keyways

Bureau of Indian Standards

IS 2710-1975 Parallel keys and keyways for machine tools
IS 2294-1986 SPECIFICATION FOR WOODRUFF KEYS AND KEYWAYS ( Second Revision )

Standards New Zealand

NZS/BS 4235.1:1972 Specification for metric keys and keyways - Parallel and taper keys

German Institute for Standardization

DIN EN 3612:1996 Aerospace series - Undercuts for splines - Design standard; German version EN 3612:1996
DIN 271:1974 Tangential Keys and Tangential Keyways for Constant Loads
DIN 6885-1:1968-08 Drive Type Fastenings without Taper Action; Parallel Keys, Keyways, Deep Pattern
DIN 2086-2:1964 Long keyway taper shank processing
DIN 268:1974 Tangential Keys and Tangential Keyways for Alternating Shock Loads
DIN 271:1974-09 Tangential Keys and Tangential Keyways for Constant Loads

Gosstandart of Russia

GOST 24069-1980 Basic norms of interchangeability. Keyed joints with normal tangent keys. Dimensions of keys and keyways. Tolerances and fits
GOST 24069-1997 Basic norms of interchangeability. Tangential keys and keyways
GOST 18220-1990 Key broaches for higher class roughness. Design
GOST 16491-1980 Key broaches. Specifications
GOST 11871-1988 Slotted round nuts, product grade A. Specifications
GOST R 53412-2009 Woodruff keyseat cutters. Specifications
GOST 6396-1978 Carbide-tipped keyway milling cutters. Specifications

SE-SIS

SIS SMS 697-1966 Machine tool test rade
SIS SMS 700-1950 Keying. Keyways for semicircular keys in shafts and housings
SIS SMS 692-1952 Key connection. Keyways for half round keys in shafts and housings
SIS SMS 294-1966 Interchangeability dimensions for milling cutters and cutter arbors. Keys and keyways

CZ-CSN

CSN 22 2192-1987 Straight-shank keyway cutters
CSN 22 3744-1970 Metal cutting tools. Key-way tools for belt pulleys. Semi-products

European Committee for Standardization (CEN)

EN 3612:1996 Aerospace series - Undercuts for splines - Design standard

Standards Norway

NS 81:1969 Taper keys without gib head and their corresponding keyways
NS 82-1969 Taper keys with gib head and their corresponding keyways
NS 82:1969 Taper keys with gib head and their corresponding keyways
NS 83:1969 Rectangular or square parallel keys and their corresponding keyways
NS 83-1969 Rectangular or square parallel keys and their corresponding keyways
NS 81-1969 Taper keys without gib head and their corresponding keyways
NS 89:1943 Wedges — Keyway for tangent wedges
NS 88:1943 Keys — Disc keys with associated shaft diameters and keyways for machine tools and tools

Lithuanian Standards Office

LST EN 3612-2001 Aerospace series - Undercuts for splines - Design standard

IPC - Association Connecting Electronics Industries

IPC 7721 3.4.2-1998 Key and Slot Repair@ Transplant Method
IPC 7721 3.4.1-1998 Key and Slot Repair@ Epoxy Method

Association Francaise de Normalisation

NF EN 3612:1996 Aerospace Series - Spline Clearance Grooves - Design Standard
NF E66-225:1972 Slotting cutters with key drive.
NF E22-182:1991 Mechanical transmissions. Tangential keys and keyways. Dimensions and tolerances.

Swedish Institute for Standards

SS-ISO 12197:1997 Woodruff keyseat cutters - Dimensions

AR-IRAM

IRAM 5051-1958 Tangent keyway and cotter pin

United States Navy

NAVY MS33787 REV D VALID NOTICE 1-1991 WRENCHING ELEMENT, EXTERNAL SPLINE, DIMENSIONS FOR
NAVY MS33787 REV D-1984 WRENCHING ELEMENT, EXTERNAL SPLINE, DIMENSIONS FOR

Defense Logistics Agency

DLA MS21312 REV B-2008 HANDWHEEL ?REVOLVING HANDLE WITH KEYWAY

Others: American Standard,key and keyway,keyway,Dimensions of the rectangular keyway,square keyway,Keyway,iso keyway size,iso keyway,Collar Keyway