How to measure flow velocity circle

How to measure flow velocity circle, Total:78 items.

The international standard classification for "How to measure flow velocity circle" includes: Non-destructive testing of metals , Vacuum technology , Flow in closed conduits , Geology. Meteorology. Hydrology .

The Chinese standard classification for "How to measure flow velocity circle" includes: Metal nondestructive testing method , Vacuum technique and equipment , Technical Management , Basic standards and general methods , Coal mine special equipment , Oceanographic instrumentation .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 11260-2023 Method for eddy current testing of round steel
GB/T 11260-2008 Round steel-the inspection method for eddy current test
GB/T 19955.1-2005 Vapour vacuum pump—Measurement of performance characteristics—Part 1:Measurement of volume rate of flow(pumping speed)

Professional Standard - Electron

SJ 364-1973 Measurement of cathode current of reflex klystrons
SJ 366-1973 Measurement of interelectrode leakage current of reflex klystrons
SJ 1706-1981 Measurement of electron-beam transmission efficiency of power klystrons
SJ 1718-1981 Measurement of cathode pulse current of power klystrons

Professional Standard - Machinery

JB/T 9050.2-1999 The determination method for contect spot of cylindrical gear

Professional Standard - Coal

MT/T 840-1999 Flow measurement method of pipe for gas drainage -measurement method of mean velocity tube flow transducer

未注明发布机构

DIN EN 16211 E:2011-01 Ventilation for buildings - Measurement of air flow rates on site - Methods
AS 1141.29:2014/Amdt 1:2019 Methods for sampling and testing aggregates - Accelerated soundness index by reflux
AS 1141.29:2014(R2019) Methods for sampling and testing aggregates - Accelerated soundness index by reflux
DIN EN 16211 E:2014-10 Ventilation for buildings - Measurement of air flow rates on site - Methods

Professional Standard - Ocean

HY/T 102-2007 Test method of acoustic Doppler current profiler

British Standards Institution (BSI)

BS 1042-2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS 1042 Sec.2.2:1983 Measurement of fluid flow in closed conduits. Velocity area methods. Method of measurement of velocity at one point of a conduit of circular cross section
BS ISO 24460:2023 Measurement of fluid flow rate in closed conduits. Radioactive tracer methods
BS 1042 Sec.2.3:1984 Measurement of fluid flow in closed conduits. Velocity area methods. Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
BS EN ISO 1133-1:2011 Plastics. Determination of the melt mass-flow rate (MFR) and melt volume-flow rate (MVR) of thermoplastics. Standard method
BS ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot statics tubes

SCC

BS 1042-2.3:1984 Measurement of fluid flow in closed conduits. Velocity area methods-Methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
BS 5758-1:1980 Vapour vacuum pumps. Method of measurement of volume rate flow ( pumping speed)
BS 5719-1:1980 Positive-displacement vacuum pumps. Method of measurement of volume rate of flow (pumping speed)
BS 1042-2.1:1983 Measurement of fluid flow in closed conduits. Velocity area methods-Method using Pitot static tubes

International Organization for Standardization (ISO)

ISO 7145:1982 Determination of flowrate of fluids in closed conduits of circular cross-section; Method of velocity measurement at one point of the cross-section
ISO 7194:1983 Measurement of fluid flow in closed conduits; Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
ISO/PRF 24460:2023 Measurement of fluid flow rate in closed conduits — Radioactive Tracer Methods
ISO 1607-1:1993 Positive-displacement vacuum pumps; measurement of performance characteristics; part 1: measurement of volume rate of flow (pumping speed)
ISO 748:1973 Title missing - Legacy paper document
ISO 748:1997 Measurement of liquid flow in open channels - Velocity-area methods
ISO 555-1:1973 Liquid flow measurement in open channels — Dilution methods for measurement of steady flow — Part 1: Constant-rate injection method
ISO 7194:2008 Measurement of fluid flow in closed conduits - Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes

Association Francaise de Normalisation

NF X10-113:1982 Determination of flowrate of fluids in closed conduits of circular cross-section. Method of velocity measurement at one point of the cross-section.
NF X10-301:1970 MEASUREMENT OF WATER FLOW IN OPEN CHANNELS BY VELOCITY AREA METHODSUSING PROPELLER CURRENT METERS.
NF EN ISO 748:2021 Hydrometry - Measurement of the flow rate of free surface flows - Methods for exploring the velocity field using point velocity measurement
NF X10-114:1993 Measurement of fluid flow in closed conduits. Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or pitot static tubes.
NF ISO 3966:2021 Measuring fluid flow in closed pipes - Method for exploring the velocity field using double Pitot tubes

YU-JUS

JUS L.H2.020-1991 Determination of flovvrate of fluids in closed conduits of circular cross-section. Method of velocity measurement at one point of the cross-section
JUS L.H2.015-1989 Measurement of fluid f/ow by means of orifice plates, nozzles and venturi tubes inserted in circular cross-saction conduits running full

American National Standards Institute （ANSI)

ANSI/ASHRAE 41.2-2022 Standard Methods for Air Velocity and Airflow Measurements
ANSI/AMCA 500-D-2012 Laboratory Methods of Testing Dampers for Rating

Korean Agency for Technology and Standards (KATS)

KS F 2010-2023 Method of measurements for flow discharge in open channels ? Velocity-area methods
KS F 2010-2013 Method of measurements for flow discharge in open channels ? Velocity-area methods
KS F 2010-2013(2018) Method of measurements for flow discharge in open channels?Velocity-area methods
KS E ISO 7194-1:2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes
KS M 3070-2013 Testing method for melt flow rate of thermoplastics
KS E ISO 7194-1-2023 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes

American Society for Testing and Materials (ASTM)

ASTM D4409-95(2008) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
ASTM D4409-95(2003) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
ASTM D4409-95(1999) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
ASTM D4409-95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Rotating Element Current Meters
ASTM D5716/D5716M-20 Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
ASTM D5716-95(2000) Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
ASTM D5089-95(2003) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D7743-12 Standard Test Method for Measuring the Minimum Fluidization Velocities of Free Flowing Powders
ASTM D5089-95(2008) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D5716-95(2006) Standard Test Method for Measuring the Rate of Well Discharge by Circular Orifice Weir
ASTM F907-85(1992)e1 Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating
ASTM F907-85E01R92 Test Method for Measurement of Rotational Acceleration of a Wafer for Photoresist Spin Coating
ASTM E265-98(2002) Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
ASTM E265-98 Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
ASTM E265-07e1 Standard Test Method for Measuring Reaction Rates and Fast-Neutron Fluences by Radioactivation of Sulfur-32
ASTM D5089-95(2014) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D5089-95(1999) Standard Test Method for Velocity Measurements of Water in Open Channels with Electromagnetic Current Meters
ASTM D3858-95(2014) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2008) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(1999) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method
ASTM D3858-95(2003) Standard Test Method for Open-Channel Flow Measurement of Water by Velocity-Area Method

Japanese Industrial Standards Committee (JISC)

JIS K 3831:1990 Testing methods for initial flow rate of membrance filters

KR-KS

KS E ISO 7194-1-2018 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current meters or pitot static tubes

Standard Association of Australia （SAA）

AS 1141.29:1999 Methods for sampling and testing aggregates - Accelerated soundness index by reflux

German Institute for Standardization

DIN EN 16211:2023-05 Ventilation for buildings - Measurement of air flow rates on site - Methods; German and English version prEN 16211:2023 / Note: Date of issue 2023-04-07*Intended as replacement for DIN EN 16211 (2015-09).

BE-NBN

NBN E 17-004-1988 Measurement of net flow volume in closed pipes. Using a flow meter, a method to measure the velocity of water flow in water-containing pipes when the water flow is regular.

TR-TSE

TS 3072-1978 Measurement Of Clean Water Flow In Closed Conduits - Velocity - Area Method Using Current - Meters
TS 2236-1976 LIQUID FLOLW MEASUREMENT ?N ?PEN CHANNELS VELOCITY - AREA METHODS

ESDU - Engineering Sciences Data Unit

ESDU 80025 C-1986 Mean forces@ pressures and flow field velocities for circular cylindrical structures: single cylinder with two-dimensional flow.

GSO

BH GSO ISO 7194:2023 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes
GSO ISO 7194:2022 Measurement of fluid flow in closed conduits — Velocity-area methods of flow measurement in swirling or asymmetric flow conditions in circular ducts by means of current-meters or Pitot static tubes

Others: