Nut tap groove design

Nut tap groove design, Total:109 items.

The international standard classification for "Nut tap groove design" includes: Taps and threading dies , Nuts .

The Chinese standard classification for "Nut tap groove design" includes: Cutting tools , Cutters , Fastener , Fasteners , Clamping fixtures .

---

Professional Standard - Aerospace

• QJ 2738.4-1995 MJ Thread Tap - Long Nut Tap
• QJ 145-1974 Type and size of bent shank nut tap
• QJ/Z 24-1974 30° spiral flute tap
• QJ/Z 13-1974 Smooth Plug Gauge for Bore Diameter of the Blanks of Circular Screwing Die Tap and Bolt Hole - Quick-changing Chuck of Long Nut Tap
• QJ 1772-1989 Long shank nut tap (d=3~27mm)
• QJ 2738.3-1995 MJ Thread Tap - Short Nut Tap
• QJ 2209.3-1991 Short shank nut tap for processing stainless steel d=2~36mm

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 3506-2008 Machine taps with helical flutes
• GB/T 3506-1993 Machine taps with helical flutes
• GB/T 6179-1986 Hexagon slotted nuts,style 1; Product grade C
• GB/T 967-2008 Nut taps
• GB/T 967-1994 Nut taps
• GB/T 28257-2012 Long shank nut taps

Professional Standard - Machinery

• JB/T 13336-2017 Taps with helical flutes for small size unified inch screw thread
• JB/T 8825.4-1998 Nut taps for whitworth threads
• JB/T 8824.4-1998 Nut taps for unified threads
• JB/T 8825.4-2011 Tool for whinworth threads — Part 4: Nut taps
• JB/T 12141-2015 Small diameter spiral flute taps
• JB/T 8824.4-2012 Tool for unified threads — Part 4：Nut taps
• JB/T 11441-2013 Machine Trapezoidal Screw Nuts Calibration Taps
• JB/T 8786-1998 Long shank nut taps

未注明发布机构

• DIN 508:2004-06 Nuts for T-slots
• DIN 4003-80 E:2018-08 Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies
• DIN 508:1979 Nuts for T-slots
• DIN 508:1977 Nuts for T-slots

工业和信息化部

• JB/T 14372-2022 Small size machine taps with helical flutes for locking threads with 30 degree wedge ramp

Professional Standard - Aviation

• HB 2378-1977 Nut tap d=8~11mm for processing heat-resistant steel HB 241-75 thread
• HB 8258-2002 Small hexagonal grooved thin nut with MJ thread (8258)
• HB 2846-1976 Quick change chucks for nut taps for M3-M36
• HB 8254-2002 Small hexagonal grooved nut with MJ thread (8254)
• HB 8252-2002 Reduced hexagon slotted thick nuts with MJ thread
• HB 8255-2002 Small hexagonal grooved nut with MJ thread (8255)
• HB 8253-2002 Small hexagonal grooved nut with MJ thread (8253)
• HB 6997-1994 Technical Specification for Guided Dentoform-correction Nut Tap for Titanium Alloy Processed MJ Thread
• HB 2376-1977 Nut tap d=3~3.5mm for processing heat-resistant steel HB 241-75 thread
• HB 3680-1986 Nut Screw Tap for Regular Screw Thread in High-temperature Alloy Machining d=11~36mm
• HB 7029.3-1994 Interchangeable Parts and Fasteners of Fixture - Taper-face Round Nut with Trough
• HB 8257-2002 Small hexagonal grooved thin nut with MJ thread (8257)
• HB 8256-2002 Small hexagonal grooved thin nut with MJ thread (8256)
• HB 8259-2002 Small hexagonal grooved thin nut with MJ thread (8259)
• HB 8052-2002 Reduced hexagon thick slotted nuts with MJ thread

Taiwan Provincial Standard of the People's Republic of China

• CNS 13382-16-1995 Implants for Surgery-Metal Bone Plates-Holes and Slots Corresponding to Screws with Conical Under-surface

Korean Agency for Technology and Standards (KATS)

• KS B 3343-1997(2002) NUT TAPS
• KS B 3343-2006 NUT TAPS
• KS B 3343-1982 NUT TAPS
• KS B 3340-1985 Nut taps for metric coarse thread
• KS B 3340-2019 Nut taps for metric coarse thread
• KS B 1039-2022 T-slot nuts
• KS B 1039-2017 T-slot nuts
• KS B ISO 7434-2007(2012) Slotted set screws with cone point

Japanese Industrial Standards Committee (JISC)

• JIS B 4433:1990 Nut taps
• JIS B 1167:2011 T-Slot nuts
• JIS B 1167:1994 T-Slot nuts
• JIS B 1167:2001 T-Slot nuts

CZ-CSN

• CSN 22 3062-1974 Long pattern nut taps for iso metric threads
• CSN ON 11 1775-1966 T-slot nut
• CSN 22 3074-1978 Nut taps for metric threads. Basic dimensions
• CSN 13 7054-1984 Globe draw-taps with threaded boss and cap nut-PN 6
• CSN 24 1448-1987 Clamping screws nuts for spindles with steep taper hollows
• CSN 24 1447-1961 Clamping screws plugs for spindles with Morse taper hollows
• CSN 22 3064-1978 Nut taps for cylindrical pipe thread. Basic dimensions
• CSN 22 0421-1966 Morse taper eocketa with the hole for clamping screw
• CSN 02 1413-1964 Small hexagon slotted nuts
• CSN 22 0411-1966 Metrie taper sockets with the hole for clamping screw

RU-GOST R

• GOST 1604-1971 Nut taps. Design
• GOST 4088-1969 Fashioned nuts. Design
• GOST 17933-1972 Machine taps with screw flutes. Design and dimensions
• GOST 6951-1971 Nut taps with curved shanks. Design and dimensions
• GOST 18840-1973 Nut non-shaving taps. Design and dimensions
• GOST 18841-1973 Nut non-shaving taps with curved shanks. Design and dimensions

Association Francaise de Normalisation

• NF E74-352:1998 Assembly tools for screws and nuts. Screwdrivers for slotted-head screws. Part 1 : tips for hand- and machine-operated screwdrivers.
• NF E74-356:1993 Screwdrivers for cross-recessed head screws. Part 2 : general requirements, lengths of blades and marking of hand-operated screwdrivers.

AR-IRAM

• IRAM 5063-1958 Internal cone screws, internal column screws or external cone screws

BE-NBN

• NBN-EN ISO 1483:1994 Slotted raised countersunk (oval) head tapping screws (common head style) (ISO 1483:1983)

Indonesia Standards

• SNI 05-3221-1992 Metric threaded crown nuts and slotted nuts, thread diameter 42 to 100 mm
• SNI 05-6022-1999 T-slot nuts

RO-ASRO

• STAS 2571-1986 Scre.ws grade B SLOTTED GOUNTERSUNK I1EAD SCREW Dimcnsions
• STAS 10525/2-1983 Machine afperated tools for screws and nuts BIT FOR SLOTTED HEAD SCREWS HEXAGON INSERT Dimensions

American National Standards Institute （ANSI)

• ANSI/ASME B5.1M-1985 T-Slots – Their Bolts, Nuts, and Tongues
• ANSI/ASME B18.2.4.3M-1979 Hex Nuts, Slotted, Metric

AT-ON

• ONORM DIN 508-1993 Nuts for T-slots Ecrous pour rainures en T
• ONORM M 4329-1986 Nut taps with metric ISO-coarse threads M3 to M68
• ONORM ISO 4027:1983 Hexagon socket set screws with cone point Vis sans tete ? six pans creux, ? bout conique

German Institute for Standardization

• DIN 508:2002 Nuts for T-slots
• DIN 508:2002-06 Nuts for T-slots
• DIN 357:2008 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
• DIN 357:2016 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
• DIN 6379:2003 Studs for use with tee nuts
• DIN 357:1998 Machine nut taps for coarse pitch metric ISO-threads M3 to M68
• DIN 4003-80:2011 Concept for the design of 3D models based on properties according to DIN 4000 - Part 80: Screwing tabs, cold forming taps and screwing dies

PL-PKN

• PN M82159-1986 Hexagon chin slotted and casde nuts

SCC

• BS 949-2:1979 Screwing taps-Taps for Unified threads (and for the obsolescent threads of Whitworth and BA forms)
• BS ISO 2351-1:2002 Assembly tools for screws and nuts. Machine-operated screwdriver bits-Screwdriver bits for slotted head screws

HU-MSZT

• MNOSZ 17104-1953 Symmetry calculation of cone template. Trough type conical formwork equipment. Exterior wall cone
• MSZ 05 26.1321-1983 Tapered handle, trapezoidal drill, screw slot with sinkable head

SE-SIS

• SIS SMS 3185-1973 Nuts for T-slots. ISO metric screw threads
• SIS SS 2830-1984 Screwdrivers for slotted head screws — Long type with round blade
• SIS SS 3365-1984 Screwdrivers for slotted head screws — Long type with square blade

GM North America

• GM VOL I SEC E-1963 Section E - Tee Nuts

YU-JUS

• JUS M.B1.466-1983 Recessed pan head tapping screvvs
• JUS M.B1.282-1980 Slotted set screws with cup point. Product grade A
• JUS M.B1.272-1981 Hexagon socket set screvvs vvith dog point, product grade A
• JUS M.B1.465-1983 Racesaed countersunk (flat) head tapping scnwt

SAE - SAE International

• SAE MA1518C-2019 Bolts@ Screws@ and Nuts - External Wrenching@ Metric Threads - Design Parameters for

IN-BIS

• IS 6174-1971 Specification for nut taps for ISO metric threads, coarse thread

Aerospace Industries Association

• AIA NASM33750-1998 Recess-Dovetail, Slot and Conical Dovetail Slot, Dimensions of Recess, Gage and Driver for FSC 53GP

British Standards Institution (BSI)

• BS ISO 2351-2:2002 Assembly tools for screws and nuts - Machine-operated screwdriver bits - Screwdriver bits for cross-recessed head screws
• PD ISO/TS 13399-301:2013 Cutting tool data representation and exchange. Concept for the design of 3D models based on properties according to ISO/TS 13399-3: Modelling of thread-cutting taps, thread-forming taps and thread-cutting dies

American Society of Mechanical Engineers (ASME)

• ASME B5.1M-1985 T-Slots, Their Bolts, Nuts, and Tongues Revision of ANSI B5.1-1975; Should Be Used Instead of ANSI B5.1. Which Was Cancelled in 1985

Others: