Vacuum resistance test

Vacuum resistance test, Total:442 items.

The international standard classification for "Vacuum resistance test" includes: Vacuum technology , Equipment for the chemical industry , Fluid storage devices , Floor treatment appliance , Refractories , Hoses and hose assemblies , Glass in general , Metallic coatings , Aircraft and space vehicles in general , Power stations in general , Materials for aerospace construction in general , Other rubber and plastics products .

The Chinese standard classification for "Vacuum resistance test" includes: Vacuum technique and equipment , Non-metal chemical machinery equipment , Pressure vessel , Household cleaning and cosmetic appliances , Fireproof material in general , Rubber tube, rubber belt and tape , Ceramic and glass in general , Packaging method , Electric power testing technique , Basic standards for aviation and aerospace materials , Spacecraft , Control circuit apparatus , Technical management , Technical management , Paper manufacturing machinery in general , Rubber seal , Stock and poultry raising machinery and tools .

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 20291-2006 Vacuum cleaners for household use - Methods for measuring the performance
GB/T 5071-2013 Refractory materials—Determination of true density
GB/T 32062-2015 In-situ test method for degradation ratio of vacuum degree of vacuum glazing―Photoelastic method
GB/T 18443.2-2010 Testing method of performance for vacuum insulation cryogenic equipment—Part 2:Vacuum degree measurement
GB/T 5567-2013 Rubber and Plastics Hoses and Hose Assemblies - Determination of Resistance to Vacuum
GB/Z 42624-2023 Vacuum technology—Vacuum gauges—Procedures to measure and report outgassing rates
GB/T 42604-2023 Vacuum technology—Vacuum gauges—Specifications for hot cathode ionization gauges
GB/T 34522-2017(英文版) Thermal vacuum test method for spacecraft
GB/T 32218-2015 Vacuum technology―Test methods for leak rates of vacuum system
GB/T 43916-2024 Vacuum technology—Vacuum gauges—Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
GB/T 23711.4-2009 Vacuum test method for pressure vessels lined with fluoroplastics
GB/T 25753.4-2015 Vacuum technology―Roots vacuum pump―Measurement of performance characteristics―Part 4:Measurement of noise
GB/T 5071-1997 Refractory materials - Determination of true density
GB/T 21271-2007 Vacuum technology - Noise measurement for vacuum pumps
GB/T 20291.1-2014 Vacuum cleaners for household use―Part 1:Dry vacuum cleaners―Methods for measuring the performance
GB/T 15717-1995 Test method for vacuum－deposited metal thickness － Electric resistance method

Group Standards of the People's Republic of China

T/AVS 004-2021 Test method of electrical conductive functional coatings applied in the vacuum vessel of nuclear fusion reacto
T/CCMS 003-2024 Vacuum suction truck—Test methods
T/QGCML 1273-2023 Image intensifier fluorescent screen vacuum test bench
T/AVS 002-2020 Leak detection test method for vacuum-related components of large-scale high-vacuum devices

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33633-2017 Vacuum technology―Positive-displacement vacuum pump―Measurement of water vapour tolerance
GB/T 34522-2017 Thermal vacuum test method for spacecraft
GB/T 33638-2017 Vacuum technology―Turbomolecular pumps―Measurement of rapid shutdown torque
GB/T 34878-2017 Vacuum technology-Valves-Leak test

Professional Standard - Electricity

DL/T 846.9-2004 General technical specifications for high voltage test equipments Part 9: Vacuum interrupter detector

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 38043-2019 Vacuum cleaners for commercial use--Methods for measuring performance
GB/T 15717-2021 Test method for vacuum-deposited metal thickness—Electric resistance method
GB/T 40344.2-2021 Vacuum technology—Standard methods for measuring vacuum-pump performance— Part 2：Positive displacement vacuum pumps

Professional Standard - Aerospace

QJ 1446A-1998 Method for Vacuum Thermal Test of Satellites
QJ 1991-1990 Vacuum—Test method for mass loss of materials irradiated by ultraviolet light
QJ 1322A-2014 Test method for mass loss of materials in vacuum
QJ 2667-1994 Determination Method of Saturated Vapor Pressure of Vacuum Greese
QJ 1322-1987 Test Methods for Mass Loss of Material in Vacuum
QJ 1371-1988 Test Method for Condensable Volatile of Materials in Vacuum
QJ 1558-1988 Test Method for Volatile Performance of Materials in Vacuum

Professional Standard - Machinery

JB/T 11238-2011 Vacuum technology — Efficiency of liquid- ring vacuum pumps
JB/T 11080-2011 Vacuum technology - Scroll vacuum pump
JB/T 5809-2007 Test method of cut-off current of vacuum contactor
JB/T 1246-2007 Vacuum technology-Rotary plunger vacuum pump
JB/T 12586-2016 Vacuum technology. Wet roots vacuum pump
JB/T 10552-2006 Vacuum technology-Claw dry vacuum pump
JB/T 10551-2006 Vacuum technology-Vacuum induction melting furnace
JB/T 5809-1991 Test method for cut-off current of vacuum contactor
JB/T 10550-2006 Vacuum technology-Vacuum sintering furnace

Military Standard of the People's Republic of China-General Armament Department

GJB 3566-1999 Air-to-air missile simulation test method
GJB 2313-1995 Specification for fluorine-resistant vacuum rubber compounds, parts and rubber sheets
GJB 4636-1993*GJBz 20161.4-1995 Combustible agent performance test method Combustible agent vacuum stability test
GJB 10179-2021 Thermal vacuum outgassing test method
GJB 9736-2020 Spacecraft thermal vacuum test methods

Professional Standard - Electron

SJ/T 10092-1991 Test methods for vacuum electric resistance furnace for use in electronic equipment
SJ/T 10576-1994 Methods of measurment and test of vacuum switch tubes for vacuum contactors
SJ/T 10582-2023 Test method for vacuum switching tubes used in low-voltage circuit breakers
SJ/T 10582-1994 Methods of measurement and test of vacuum switch tubes for low-voltage circuit breakers

Professional Standard - Light Industry

QB/T 1445-1992 Perfrmance Test Method for Wet Roots Vacuum Pump

Professional Standard - Chemical Industry

HG/T 2333-1992 Rubber Materials of O-Rings for Vacuum Use

Taiwan Provincial Standard of the People's Republic of China

CNS 620-1998 Method for determination of true density of refractory materials

未注明发布机构

QJ 1558B-2016 Test method for materials outgassing performance in vacuum
SAE AMS 5782J-2024 Steel, Corrosion- and Heat-Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted

工业和信息化部

JB/T 1246-2019 Vacuum technology-Rotary plunger vacuum pump
JBT1246-2019 Vacuum technology slide valve vacuum pump

未注明发布机构

QJ 1558B-2016 Test method for materials outgassing performance in vacuum
SAE AMS 5782J-2024 Steel, Corrosion- and Heat-Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted

Professional Standard - Agriculture

JB/T 9808.2-1999 Vacuum Pump Used for Milking - Test Methods

Standard Association of Australia （SAA）

AS 1180.7J:1972 Methods of test for hose made from elastomeric materials - Resistance to vacuum
AS 1774.6:2001(R2013) Determination of true density of refractory materials and physical test methods for refractory materials
AS 1774.6:2001 Refractories and refractory materials - Physical test methods - Determination of true density
AS 3153:1982 Approval and test specification for vacuum cleaners
AS 3153:1976 Approval and test specification for vacuum cleaners
AS 1774.6:1978 Refractories and refractory materials - Physical test methods, Method 6: The determination of true density
AS 1774.6:1992 Refractories and refractory materials - Physical test methods, Method 6: Determination of true density

Spanish Association for Standardization (UNE)

SAE AMS5401C-2023 Nickel Alloy, Corrosion- and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As Cast
UNE 68068-1:1986 ERRATUM VACUUM REGULATORS FOR MILKING MACHINES. PERFORMANCE. TESTS
UNE-EN ISO 7233:2022 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)
UNE 68068-1:1985 VACUUM REGULATORS FOR MILKING MACHINES. PERFORMANCE. TESTS
UNE-EN ISO 7233:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2006)

SCC

VDI 3823 BLATT 4-2006 Quality assurance in the vacuum coating of plastics — tests on vacuum-coated plastic parts
BS 5173-102-102.9:1985 Methods of test for rubber and plastics hoses and hose assemblies. Hydraulic pressure tests-Determination of resistance to vacuum
VDI 3823 BLATT 4-2006 Quality assurance in the vacuum coating of plastics — tests on vacuum-coated plastic parts
08/30176520 DC BS ISO 27895. Vacuum technology. Valves. Leak test
DANSK DS/ISO 7233:2021 Rubber and plastics hoses and hose assemblies – Determination of resistance to vacuum
HOLDEN HN 1856-2012 Durability Requirements for Vacuum Metallised Coating on Exterior Parts
BS PD ISO/TS 20177:2018 Vacuum technology. Vacuum gauges. Procedures to measure and report outgassing rates
BS PD ISO/TS 6737:2023 Vacuum technology. Vacuum gauges. Characteristics for a stable ionisation vacuum gauge
NS-EN ISO 7233:2008 Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum (ISO 7233:2006)
NS-EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)
NS-EN ISO 7233:2016 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2016)
DANSK DS/EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies – Determination of resistance to vacuum (ISO 7233:2021)
BS 3999-12:1982 Methods of measuring the performance of household electrical appliances-Vacuum cleaners
09/30176359 DC BS ISO 21360-2. Vacuum technology. Standard methods for measuring. vacuum-pump performance. Part 2. Positive displacement vacuum pumps
05/30133137 DC ISO 21360. Vacuum technology. Standard methods for measuring vacuum-pump performance. General description
NS-EN 993-18:2002 Methods of test for dense shaped refractory products — Part 18: Determination of bulk density of granular materials by the water method with vacuum
BS ISO 21360:2007 Vacuum technology. Standard methods for measuring vacuum-pump performance. General description
HOLDEN HN 1856-1987 Durability Requirements for Vacuum Metallised Coatings on Exterior Parts
NS-EN 993-17:1998 Methods of test for dense shaped refractory products — Part 17: Determination of bulk density of granular materials by the mercury method with vacuum
DANSK DS/EN 993-17:1999 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vacuum

British Standards Institution (BSI)

BS ISO 24412:2023 Space systems. Thermal vacuum environmental testing
22/30403030 DC BS ISO 24412. Space systems. Thermal vacuum environmental testing
BS ISO 21360-6:2023 Vacuum technology. Standard methods for measuring vacuum-pump performance - Cryogenic vacuum pumps
BS EN ISO 7233:2016 Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
BS EN ISO 7233:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
BS ISO 21360-4:2018 Vacuum technology. Standard methods for measuring vacuum-pump performance. Turbomolecular vacuum pumps
BS ISO 21360-2:2020 Vacuum technology. Standard methods for measuring vacuum-pump performance - Positive displacement vacuum pumps
BS ISO 21360-2:2012 Vacuum technology. Standard methods for measuring vacuum-pump performance. Positive displacement vacuum pumps
BS EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
BS ISO 21360-5:2023 Vacuum technology. Standard methods for measuring vacuum-pump performance - Non-evaporable getter (NEG) vacuum pumps
BS EN 993-18:2002 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the water method with vacuum
BS ISO 24477:2022 Vacuum technology.Vacuum gauges.Specifications, calibration and measurement uncertainties for spinning rotor gauges
BS ISO 21360-1:2020 Vacuum technology. Standard methods for measuring vacuum-pump performance - General description
PD ISO/TS 6737:2023 Vacuum technology. Vacuum gauges. Characteristics for a stable ionisation vacuum gauge
BS ISO 21360-1:2012 Vacuum technology. Standard methods for measuring vacuum-pump performance. General description
BS ISO 21360-3:2019 Vacuum technology. Standard methods for measuring vacuum pump performance - Specific parameters for mechanical booster vacuum pumps
22/30449831 DC BS ISO 21360-5. Vacuum technology. Standard methods for measuring vacuum-pump performance - Part 5. NEG vacuum pumps
BS ISO 27894:2009 Vacuum technology - Vacuum gauges - Specifications for hot cathode ionization gauges
PD ISO/TS 20177:2018 Vacuum technology. Vacuum gauges. Procedures to measure and report outgassing rates
22/30449834 DC BS ISO 21360-6. Vacuum technology. Standard methods for measuring vacuum-pump performance - Part 6. Cryo vacuum pumps
BS EN 993-2:1995 Methods of test for dense shaped refractory products. Determination of true density
BS EN 993-17:1999 Methods of test for dense shaped refractory products - Determination of bulk density of granular materials by the mercury method with vacuum
20/30375730 DC BS EN ISO 7233. Rubber and plastics hoses and hose assemblies. Determination of resistance to vacuum
BS EN 60312-1:2017 Vacuum cleaners for household use. Dry vacuum cleaners. Methods for measuring the performance

(U.S.) Ford Automotive Standards

FORD FLTM BJ 012-2-2001 VACUUM DIAPHRAGM COMPATIBILITY TEST
FORD FLTM BN 027-2-2000 ADHESIVE VACUUM TEST FOR LANDAU ROOFS
FORD FLTM EU BN 027-2-2001 ADHESIVE VACUUM TEST FOR VINYL ROOFS
FORD FLTM BJ 012-02-2001 VACUUM DIAPHRAGM COMPATIBILITY TEST

SAE - SAE International

SAE MAM5401B-2003 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 62Ni - 21.5Cr - 9.0Mo - 3.6(Cb+Ta) Vacuum Melted, Vacuum Cast As Cast
SAE AMS5401B-1996 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 62Ni - 21.5Cr - 9.0Mo - 3.6(Cb+Ta) Vacuum Melted, Vacuum Cast As Cast
SAE MAM5401A-1996 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 62Ni - 21.5Cr - 9.0Mo - 3.6(Cb+Ta) Vacuum Melted, Vacuum Cast As Cast
SAE AMS5403B-2007 Alloy Castings@ Investment@ Corrosion and Heat Resistant 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vacuum Melted@ Vacuum Cast
SAE AMS5397D-2008 Alloy Castings, Investment, Corrosion and Heat Resistant 50Ni 9.5Cr 15Co 3.0Mo 4.8Ti 5.5Al 0.015B 0.95V 0.06Zr Vacuum Melted, Vacuum Cast, As Cast
SAE AMS5809A-1995 ALLOY WELDING WIRE@ CORROSION AND HEAT RESISTANT 52Co-20Cr-20Ni-7.5Ta Vacuum Melted
SAE AMS5809-1990 ALLOY WELDING WIRE@ CORROSION AND HEAT RESISTANT 52Co-20Cr-20Ni-7.5Ta Vacuum Melted
SAE AMS5812E-1992 Steel@ Corrosion and Heat Resistant@ Welding Wire 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Melted
SAE AMS5933A-2018 Steel@ Corrosion Resistant Bars and Forgings 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted
SAE AMS5822B-1993 Steel@ Corrosion and Heat Resistant@ Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted
SAE AMS5803E-2007 Steel@ Corrosion and Heat-Resistant@ Welding Wire 16.4Cr - 4.8Ni - 0.22Cb - 3.6Cu Vacuum Melted (UNS S17480)
SAE AMS5840C-1992 Steel@ Corrosion and Heat Resistant@ Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted (UNS S13889)
SAE MAM5822-1993 Steel@ Corrosion and Heat Resistant@ Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted
SAE AMS5409A-2002 Alloy Casting@ Investment@ Corrosion and Heat Resistant 61Ni- 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.8Cb - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.06Zr (0.03 - 0.08C) Vacuum Melted@ Vacuum Cast as Cast
SAE AMS5814A-1994 Cobalt Alloy@ Corrosion and Heat Resistant@ Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted (UNS R30918)
SAE AMS5803G-2015 Steel@ Corrosion and Heat-Resistant@ Welding Wire 16.4Cr - 4.8Ni - 0.22Cb (Nb) - 3.6Cu Consumable Electrode or Vacuum Induction Melted (UNS S17480)
SAE MAM5822B-2003 Steel@ Corrosion and Heat Resistant@ Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted (UNS S41780)
SAE AMS5803C-1996 Steel@ Corrosion and Heat Resistant@ Welding Wire 16.4Cr - 4.8Ni - 0.22 (Cb+Ta) - 3.6Cu Vacuum Melted (UNS S17480)
SAE AMS5578E-2001 Steel@ Corrosion and Heat Resistant@ Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated@ Precipitation Hardenable (UNS S45500)
SAE AMS5578F-2002 Steel@ Corrosion and Heat-Resistant@ Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated@ Precipitation Hardenable (UNS S45500)
SAE AMS5578D-1995 Steel@ Corrosion and Heat Resistant@ Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated@ Precipitation Hardenable (UNS S45500)
SAE MAM5822A-2000 Steel@ Corrosion and Heat Resistant@ Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted (UNS S41780)
SAE AMS5930B-2017 Steel@ Corrosion-Resistant@ Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted (UNS S42670)
SAE AMS5617J-2006 Steel@ Corrosion-Resistant@ Bars@ Wire@ and Forgings 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S45500)
SAE AMS5617K-2018 Steel@ Corrosion-Resistant@ Bars@ Wire@ and Forgings 12Cr - 8.5Ni - 1.2Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated@ Precipitation Hardenable (UNS S45500)
SAE AMS5782E-1966 Steel@ Corrosion and Heat Resistant@ Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted (UNS S63197)
SAE AMS5543-1960 STEEL SHEET AND STRIP@ CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Vacuum Melted@ Solution Treated
SAE AMS5782H-2019 Steel@ Corrosion and Heat Resistant@ Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted (UNS S63197)
SAE AMS5829C-1994 Nickel Alloy@ Corrosion and Heat Resistant@ Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5A1 Vacuum Induction Melted (UNS N07090)

Society of Automotive Engineers (SAE)

SAE AMS5401-1980 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 62Ni - 21.5Cr - 9.0Mo - 3.6(Cb+Ta) Vacuum Melted, Vacuum Cast
SAE MAM5401-1988 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 62Ni - 21.5Cr - 9.0Mo - 3.6(Cb+Ta) Vacuum Melted, Vacuum Cast As Cast
SAE AMS5401C-2018 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As Cast
SAE AMS5401A-2011 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 62Ni - 21.5Cr - 9.0Mo - 3.6(Cb+Ta) Vacuum Melted, Vacuum Cast As Cast
SAE AMS5397-1965 ALLOYS CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT Nickel Base - 10Cr - 15Co - 3Mo - 4.75Ti - 5.5Al - 0.95V Vacuum Melted and Vacuum Cast
SAE AMS5407-1995 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 60Ni - 9.0Cr - 10Co - 12.5W - 1.0Cb - 2.0Ti - 5.0Al - 0.015B - 0.06Zr Vacuum Melted, Vacuum Cast As Cast
SAE AMS5403-1995 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vacuum Melted, Vacuum Cast
SAE AMS5397A-1977 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.6Zr Vacuum-Melted, Vacuum-Cast
SAE AMS5383-1966 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 3.0Mo - 5.1(Cb + Ta) - 0.90Ti - 0.60Al Vacuum Melted, Vacuum Cast
SAE AIR4394A-2020 Vacuum Investment Cast PH13-8Mo Corrosion Resistant Steel
SAE AMS5397B-2011 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum-Melted, Vacuum-Cast As Cast
SAE AMS5397C-1985 Alloy Castings, Investment, Corrosion and Heat Resistant 50Ni 9.5Cr 15Co 3.0Mo 4.8Ti 5.5Al 0.015B 0.95V 0.06Zr Vacuum Melted, Vacuum Cast, As Cast
SAE AMS5405-1995 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 64Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.08Zr Vacuum Melted, Vacuum Cast As Cast
SAE AMS5406-1995 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 63Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.03Zr - 1.2Hf Vacuum Melted, Vacuum Cast As Cast
SAE AMS5403A-1995 Alloy Castings, Investment, Corrosion and Heat Resistant 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vacuum Melted, Vacuum Cast R (2002)
SAE AMS5405A-2001 Alloy Castings, Investment, Corrosion and Heat Resistant 64Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.08Zr Vacuum Melted, Vacuum Cast as Cast
SAE AMS5406A-2001 Alloy Castings, Investment, Corrosion and Heat Resistant 63Ni - 8.0Cr - 10Co - 6.0Mo - 1.0Ti - 4.2Ta - 6.0Al - 0.015B - 0.03Zr - 1.2Hf Vacuum Melted, Vacuum Cast as Cast
SAE AMS5399A-1977 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Treated
SAE AMS5397D-2014 Alloy Castings, Investment, Corrosion and Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum Melted, Vacuum Cast As Cast
SAE AMS5399C-1993 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings, 52Ni 19Cr 11Co 9.8Mo 3.2Ti 1.6Al 0.006B, Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5397C-2002 Alloy Castings, Investment, Corrosion and Heat Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum Melted, Vacuum Cast As Cast
SAE AMS5840D-2006 Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
SAE AMS5812F-2006 Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Melted
SAE AMS5812F-2001 Steel, Corrosion and Heat Resistant, Welding Wire 15Cr 7.1Ni 2.4Mo 1.0Al Vacuum Melted
SAE AMS5403A-2002 Alloy Castings, Investment, Corrosion and Heat Resistant 60Ni - 14Cr - 9.5Co - 4.0Mo - 4.0W - 5.0Ti - 3.0Al - 0.015B - 0.06Zr Vacuum Melted, Vacuum Cast
SAE AMS5840E-2022 Steel, Corrosion- and Heat-Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
SAE AMS5399D-2023 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5401C-2004 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 62Ni - 21.5Cr - 9.0Mo - 3.6Cb (Nb) Vacuum Melted, Vacuum Cast As Cast UNS N26625
SAE AMS5399-1966 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 11Co - 9.75Mo - 3.15Ti - 1.6Al Vacuum Melted and Vacuum Cast, Solution Treated
SAE AMS5840C-2000 Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
SAE AMS5399B-1983 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5410-1995 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.85Cb - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.05Zr Vacuum Melted, Vacuum Cast, As Cast
SAE AMS5840E-2010 Steel, Corrosion and Heat Resistant, Welding Wire 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted (UNS S13889)
SAE AMS5809-1995 Alloy Welding Wire, Corrosion And Heat Resistant 52co - 20cr -20ni - 7.5ta Vacuum Melted
SAE AMS5840D-2001 Steel, Corrosion and Moderate Heat Resistant, Welding Wire 13Cr 8.0Ni 2.3Mo 1.1Al Vacuum Melted
SAE AMS5399D-2018 Nickel Alloy, Corrosion and Heat-Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5399C-2000 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5809A-1990 Alloy Welding Wire, Corrosion and Heat Resistant 52co 20cr 20ni 7.5ta Vacuum Melted
SAE AMS5397F-2021 Nickel Alloy Castings, Investment, Corrosion and Heat-Resistant 50Ni - 9.5Cr - 15Co - 3.0Mo - 4.8Ti - 5.5Al - 0.015B - 0.95V - 0.06Zr Vacuum Melted, Vacuum Cast As Cast (UNS N13100)
SAE AMS5876-1984 ALLOY STRIP, CORROSION AND HEAT RESISTANT 20Cr - 15Ni - 40Co - 7.0Mo - 0.06Be - 16Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Cold Rolled
SAE AMS5933-2012 Steel, Corrosion Resistant Bars and Forgings 12.5Cr - 1.0Ni - 15.5Co - 2.0Mo Vacuum Induction Plus Vacuum Consumable Electrode Remelted
SAE AMS5384A-1977 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 53Ni - 18Cr - 18Co - 4Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Treated
SAE AMS5814-1994 COBALT ALLOY, CORROSION AND HEAT RESISTANT, WELDING WIRE 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted
SAE AMS5814C-2017 Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted
SAE AMS5840A-1979 STEEL WELDING WIRE, CORROSION AND MODERATE HEAT RESISTANT 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
SAE AMS5840B-1986 STEEL WELDING WIRE, CORROSION AND MODERATE HEAT RESISTANT 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
SAE AMS5814D-2022 Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted
SAE AMS5741A-1959 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
SAE AMS5384C-1985 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated
SAE AMS5805-1962 STEEL WIRE, WELDING, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.2Ti - 0.3V Vacuum Melted
SAE AMS5812G-2021 Steel, Corrosion and Heat Resistant, Welding Wire 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Induction Melted
SAE AMS5805A-1963 STEEL WIRE, WELDING, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.2Ti - 0.3V Vacuum Melted
SAE AMS5384D-1995 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated
SAE AMS5803B-2011 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 16.4Cr - 4.8Ni - 0.22(Cb + Ta) - 3.6Cu Vacuum Melted
SAE AMS5384B-1982 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated
SAE AMS5812C-1979 STEEL WELDING WIRE, CORROSION AND MODERATE HEAT RESISTANT 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Melted
SAE AMS5812D-2011 STEEL WELDING WIRE, CORROSION AND MODERATE HEAT RESISTANT 15Cr - 7.1Ni - 2.4Mo - 1.0Al Vacuum Melted
SAE AMS5741B-1960 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
SAE AMS5805B-1967 STEEL WIRE, WELDING, CORROSION AND HEAT RESISTANT 15Cr - 26Ni - 1.3Mo - 2.2Ti - 0.30V Vacuum Melted
SAE AMS5741-1959 STEEL, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
SAE AMS5399D-2006 Nickel Alloy, Corrosion and Heat Resistant, Investment Castings 52Ni - 19Cr - 11Co - 9.8Mo - 3.2Ti - 1.6Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution Heat Treated
SAE AMS5409-1995 ALLOY CASTING, INVESTMENT, CORROSION AND HEAT RESISTANT 61Ni - 16Cr - 8.5Co - 1.8Mo - 2.6W - 0.8Cb - 3.4Ti - 1.8Ta - 3.4Al - 0.010B - 0.06Zr (0.03 - 0.08C) Vacuum Melted, Vacuum Cast As cast
SAE AMS5812B-1963 STEEL WIRE, WELDING, CORROSION AND MODERATE HEAT RESISTANT 15Cr - 7.1Ni - 2.4Mo - 1Al Vacuum Melted
SAE AMS5812-1961 STEEL WIRE, WELDING, CORROSION AND MODERATE HEAT RESISTANT 15Cr - 7.1Ni - 2.4Mo - 1Al Vacuum Melted
SAE AMS5822D-2017 Steel, Corrosion and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted
SAE AMS5822A-1991 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted
SAE AMS5822D-2006 Steel, Corrosion and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted UNS S41780
SAE AMS5840-1969 STEEL WIRE, WELDING, CORROSION AND MODERATE HEAT RESISTANT 13Cr - 8.0Ni - 2.3Mo - 1.1Al Vacuum Melted
SAE AMS5812A-1961 STEEL WIRE, WELDING, CORROSION AND MODERATE HEAT RESISTANT 15Cr - 7.1Ni - 2.4Mo - 1Al Vacuum Melted
SAE AMS5822E-2022 Steel, Corrosion and Heat-Resistant, Welding Wire 11.8Cr - 2.8Ni - 1.6Co - 1.8Mo - 0.32V Vacuum Induction Melted
SAE AMS5578G-2014 Steel, Corrosion and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable
SAE AMS5814C-2006 Cobalt Alloy, Corrosion and Heat-Resistant, Welding Wire 52Co - 20Cr - 20Ni - 7.5Ta Vacuum Melted UNS R30918 [Superseded: SAE AMS 5809A]
SAE AMS5384E-2012 Alloy Castings, Investment, Corrosion and Heat Resistant 53Ni - 18Cr - 18Co - 4.0Mo - 2.9Ti - 2.9Al - 0.006B Vacuum-Melted, Vacuum-Cast, Solution and Precipitation Heat Treated
SAE AMS5876B-2000 Cobalt Alloy, Corrosion and Heat Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated and Cold Rolled Vacuum Induction Plus Vacuum Consumable Electrode Melted
SAE AMS5404-2011 ALLOY CASTINGS, INVESTMENT, CORROSION AND HEAT RESISTANT 59Ni - 12.6Cr - 9.0Co - 1.9Mo - 4.2W - 4.0Ti - 4.2Ta - 3.4Al - 0.015B - 0.10Zr - 0.90Hf Vacuum Melted, Vacuum Cast Solution and Precipitation Heat Treated
SAE AMS5844H-2014 Alloy, Corrosion-Resistant, Round Bars, 20Cr - 35Ni - 35Co - 10Mo, Vacuum Induction Plus Consumable Electrode Vacuum Remelted, Solution Heat Treated and Work Strengthened
SAE AMS5844G-2008 Alloy, Corrosion-Resistant, Round Bars 20Cr 35Ni 35Co 10Mo Vacuum Induction Plus Vacuum Consumable Electrode Vacuum Remelted Solution Heat Treated and Work Strengthened
SAE AMS5875-1984 ALLOY STRIP, CORROSION AND HEAT RESISTANT 40Co - 20Cr - 15Ni - 7.0Mo - 0.06Be - 16Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated, Cold Rolled, and Aged
SAE AMS5578H-2023 Steel, Corrosion- and Heat-Resistant, Welded Tubing 12Cr - 8.5Ni - 0.30Cb - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable
SAE AMS5803A-1988 STEEL WELDING WIRE, CORROSION AND MODERATE HEAT RESISTANT 16.2Cr - 4.8Ni - 0.22(Cb + Ta) - 3.5Cu Vacuum Melted
SAE AMS5782F-2007 Steel, Corrosion and Heat-Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted
SAE AMS5746-1960 ALLOY, CORROSION AND HEAT RESISTANT 15Cr - 45Ni - 4W - 4Mo - 3Ti - 1Al Consumable Electrode Vacuum Melted
SAE AMS5746B-1968 ALLOY, CORROSION AND HEAT RESISTANT 15Cr - 45Ni - 4.1Mo - 4.1W - 3.0Ti - 1.0Al Consumable Electrode Vacuum Melted
SAE AMS5746A-1966 ALLOY, CORROSION AND HEAT RESISTANT 15Cr - 45Ni - 4W - 4Mo - 3Ti - 1Al Consumable Electrode Vacuum Melted
SAE AMS5578A-1979 STEEL TUBING, WELDED, CORROSION AND MODERATE HEAT RESISTANT 12Cr - 8.5Ni - 0.30(Cb+Ta) - 1.1Ti - 2.0Cu Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated
SAE AMS5800B-1979 ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT 54Ni - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al - 0.006B Vacuum Melted
SAE AMS5829E-2006 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5A1 Vacuum Induction Melted UNS N07090
SAE AMS5803D-2002 Steel, Corrosion and Heat-Resistant, Welding Wire 16.4Cr - 4.8Ni - 0.22Cb - 3.6Cu Vacuum Melted UNS S17480
SAE AMS5803-1987 STEEL WELDING WIRE, CORROSION AND MODERATE HEAT RESISTANT 16.2Cr - 4.8Ni - 0.22(Cb + Ta) - 3.5Cu Vacuum Melted
SAE AMS5805C-1979 STEEL WELDING WIRE, CORROSION AND HEAT RESISTANT 15Cr - 25.5Ni - 1.3Mo - 2.2Ti - 0.006B - 0.30V Vacuum Induction Melted
SAE AMS5829B-1988 ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT 56Ni - 19.5Cr - 18Co - 2.5Ti - 1.5Al Vacuum Induction Melted
SAE AMS5782J-2024 Steel, Corrosion- and Heat-Resistant, Welding Wire 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted
SAE AMS5814B-2000 Cobalt Alloy, Corrosion and Heat Resistant, Welding Wire 52Co 20Cr 20Ni 7.5Ta Vacuum Melted
SAE J1808-2015 Vacuum Power Assist Brake Booster Test Procedure@ Standard
SAE AMS5875C-2012 Cobalt Alloy, Corrosion and Heat-Resistant, Strip 20Cr - 15Ni - 40Co - 7.0Mo - 16Fe Solution Heat Treated, Cold Rolled, and Aged Vacuum Induction Plus Vacuum Consumable Electrode Melted
SAE AMS5930A-2010 Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted
SAE AMS5404A-2002 Alloy Castings, Investment, Corrosion and Heat Resistant 59Ni - 12.6Cr - 9.0Co - 1.9Mo - 4.2W - 4.0Ti - 4.2Ta - 3.4Al - 0.015B - 0.10Zr - 0.90Hf Vacuum Melted, Vacuum Cast Solution and Precipitation Heat Treated
SAE AMS5578C-1991 STEEL TUBING, WELDED, CORROSION AND HEAT RESISTANT 12Cr - 8.5Ni - 0.30(Cb+Ta) - 1.1Ti - 2.0Cu Vacuum Induction Plus Consumable Electrode Vacuum Melted Solution Heat Treated, Precipitation Hardenable
SAE AMS5829F-2022 Nickel Alloy, Corrosion- and Heat-Resistant, Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5Al Vacuum Induction Melted
SAE AMS5829E-2017 Nickel Alloy, Corrosion and Heat-Resistant, Welding Wire 56Ni - 19.5Cr - 16.5Co - 2.5Ti - 1.5Al Vacuum Induction Melted
SAE AMS5829A-1982 ALLOY WIRE, WELDING, CORROSION AND HEAT RESISTANT 56Ni - 19.5Cr - 18Co - 2.5Ti - 1.5Al Vacuum Induction Melted
SAE AMS5800-1962 ALLOY WIRE, WELDING, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al Vacuum Melted
SAE AMS5930A-2005 Steel, Corrosion-Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted Composition similar to UNS S42670
SAE AMS5822C-2000 Steel, Corrosion and Heat Resistant, Welding Wire 11.8Cr 2.8Ni 1.6Co 1.8Mo 0.32V Vacuum Induction Melted
SAE AMS5782G-2013 Steel, Corrosion and Heat-Resistant, Welding Wire 20.5Cr 9.0Ni 0.50Mo 1.5W 1.2Cb 0.20Ti Vacuum Induction Melted
SAE AMS5841A-1983 ALLOY BARS, CORROSION AND HEAT RESISTANT 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening
SAE AMS5617B-1976 STEEL BARS AND FORGINGS, CORROSION RESISTANT 12Cr - 8.5Ni - 2.0Cu - 1.1Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated
SAE AMS5617C-1977 STEEL BARS AND FORGINGS, CORROSION RESISTANT 12Cr - 8.5Ni - 2.0Cu - 1.1Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated
SAE AMS5841B-1989 ALLOY BARS, CORROSION AND HEAT RESISTANT 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated for Work Strengthening
SAE AMS5842B-1988 ALLOY BARS, CORROSION AND HEAT RESISTANT 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened
SAE AMS5404A-1995 Alloy Castings, Investment, Corrosion and Heat Resistant 59Ni - 12.6Cr - 9.0Co - 1.9Mo - 4.2W - 4.0Ti - 4.2Ta - 3.4Al - 0.015B - 0.10Zr - 0.90Hf Vacuum Melted, Vacuum Cast Solution and Precipitation Heat Treated
SAE AMS5842A-1983 ALLOY BARS, CORROSION AND HEAT RESISTANT 19Cr - 36Co - 25Ni - 7.0Mo - 0.50Cb - 2.9Ti - 0.20Al - 9.0Fe Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated and Work Strengthened
SAE AMS5800A-1963 ALLOY WIRE, WELDING, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 11Co - 10Mo - 3.2Ti - 1.5Al Vacuum Melted
SAE AMS5617D-1979 STEEL BARS AND FORGINGS, CORROSION RESISTANT 12Cr - 8.5Ni - 2.0Cu - 1.1Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated
SAE AMS5617A-1973 STEEL BARS AND FORGINGS, CORROSION RESISTANT 12Cr - 8.5Ni - 2.0Cu - 1.1Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated
SAE AMS5617E-1981 STEEL BARS AND FORGINGS, CORROSION RESISTANT 12Cr - 8.5Ni - 2.0Cu - 1.1Ti Vacuum Induction Plus Vacuum Consumable Electrode Melted Solution Heat Treated
SAE AMS5712B-1966 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 11Co - 10Mo - 3Ti - 1.5Al Vacuum Melted, Solution Treated
SAE AMS5741C-1963 STEEL BARS AND FORGINGS, CORROSION AND HEAT RESISTANT 13.5Cr - 26Ni - 1.75Mo - 3Ti Consumable Electrode Vacuum Melted
SAE AMS5930-1995 Steel, Corrosion Resistant, Bars and Forgings 13.0Cr - 2.5Ni - 5.5Co - 2.0Mo - 0.60V (0.05 - 0.09C) Vacuum Induction Plus Vacuum Consumable Electrode Melted (UNS S42670)
SAE AMS5756-1990 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 10Co - 10Mo - 1Al - 2.5Ti Vacuum Melted, Solution Treated
SAE AMS5782E-1996 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 20.5Cr - 9.ONi - 0-50Mo - 1.5W - 1.2Cb - 0.20Ti Vacuum Induction Melted
SAE AMS5712-1960 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 11Co - 10Mo - 3Ti - 1.5Al Vacuum Melted, Solution Treated
SAE AMS5828C-2001 ALLOY WELDING WIRE, CORROSION AND HEAT RESISTANT 57Ni - 19.5Cr - 13.5Co - 4.2Mo - 3.1Ti - 1.4Al - 0.006B Vacuum Induction Melted
SAE AMS5712A-1966 ALLOY, CORROSION AND HEAT RESISTANT Nickel Base - 19Cr - 11Co - 10Mo - 3Ti - 1.5Al Vacuum Melted, Solution Treated
SAE AMS5782D-2011 STEEL, CORROSION AND HEAT RESISTANT, WELDING WIRE 20.5Cr - 9.0Ni - 0.50Mo - 1.5W - 1.2(Cb+Ta) - 0.20Ti Vacuum Induction Melted

Korean Agency for Technology and Standards (KATS)

KS C 7019-2013 Testing Method for Receiving Vacuum Tubes
KS B 6846-1999(2019) Test code of vacuum heat treatment furnace
KS A 0081-1989 Measuring methods of low pressures by discharge and ionization vacuum gauges
KS L 3304-1964 Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3304-2012(2017) Testing method for specific gravity and true porosity of insulating fire bricks
KS L 3304-1987 Testing method for specific gravity and true porosity of insulating fire bricks
KS M ISO 7233-2023 Rubber and plastics hoses and hose assemblies — Determination of resistance to vacuum
KS V 0953-2019 On-board test procedure for vacuum sewage treatment system
KS B 0083-2022 Measuring methods of low pressures by discharge and ionization vacuum gauges
KS M 5439-1984 Test methods for specific gravity of solvent and Thinner (vaccum)
KS V 0953-2014(2019) On-board test procedure for vacuum sewage treatment system
KS B 6314-2-2002(2012) Positive-displacement oil-sealed rotary vacuum pumps－Measurement of volume rate of flow(pumping speed)
KS C 7019-1992 Testing Method for Receiving Vacuum Tubes
KS B 6387-2008 Reliability test method for the vacuum valves-Part 1:Angle valves
KS M 5438-1982 Test methods for specific gravity of pigments (vaccum)
KS B 6846-2019 Test code of vacuum heat treatment furnace

IT-UNI

UNI ISO 27895:2020 Vacuum technology -- Valves -- Leak test
UNI ISO 19685:2020 Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for Pirani gauges
UNI ISO 21360-2:2020 Vacuum technology -- Standard methods for measuring vacuum-pump performance - Part 2: Positive displacement vacuum pumps
UNI ISO 20146:2020 Vacuum technology -- Vacuum gauges -- Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
UNI ISO 21360-4:2020 Vacuum technology -- Standard methods for measuring vacuum-pump performance - Part 4: Turbomolecular vacuum pumps
UNI EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
UNI ISO/TS 20177:2020 Vacuum technology -- Vacuum gauges -- Procedures to measure and report outgassing rates
UNI ISO 21360-3:2020 Vacuum technology -- Standard methods for measuring vacuum pump performance - Part 3: Specific parameters for mechanical booster vacuum pumps

VDI - Verein Deutscher Ingenieure

VDI 3823 Blatt 4-2004 Vacuum coating quality assurance - Testing of vacuum coated plastics

PL-PKN

PN A13001-1987 Vacuum bottles Specification and methods of test
PN T06440-1967 Transmitting and vacuum rectifier electronic tubes Re?uirements and tests

RU-GOST R

GOST 25663-1983 Vacuum equipment. Mechanical vacuum pumps. Test methods
GOST 32974-2014 Vacuum technology. Standard methods for measuring vacuum-pump performance. Part 2. Positive displacement vacuum pumps
GOST R 54807-2011 Vacuum technology. Standard methods for measuring vacuum-pump performance
GOST 25662-1983 Vacuum equipment. Diffusion vacuum pumps. Test methods
GOST R ISO 27895-2013 Vacuum technology. Valves. Leak test

European Committee for Standardization (CEN)

EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)
EN ISO 7233:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
EN ISO 7233:1995 Rubber and Plastics Hoses and Hose Assemblies - Determination of Suction Resistance (ISO 7233 : 1991)
CEN/TS 15083-2:2005 Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi

Danish Standards Foundation

DS/ISO 7233:1984 Rubber and plastic hoses and hose assemblies. Vacuum resistance. Methods of test
DS/ISO 7233:2021 Rubber and plastics hoses and hose assemblies – Determination of resistance to vacuum
DS/EN ISO 7233:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum

Association Francaise de Normalisation

NF X10-520:1974 Vacuum technology. Pressure measurement in industrial vacuum systems.
NF T47-211:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum.
NF C73-161:2008 Vacuum cleaners for household use - Methods of measuring the performance.
NF X10-510-2:2012 Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 2 : positive displacement vacuum pumps.
NF X10-512:1975 Vacuum technology - Positive-displacement vacuum pumps - Measurement of ultimate pressure.
NF X10-510-4*NF ISO 21360-4:2018 Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 4 : Turbomolecular vacuum pumps
NF T47-211*NF EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
NF X10-516:1975 Vacuum technology. Vapour vacuum pumps. Measurement of critical backing pressure.
NF X10-501:1976 Vacuum technology. Vocabulary. Vacuum pumps.
NF B40-339*NF EN 993-17:1999 Methods of test for dense shaped refractory products. Part 17 : determination of bulk density of granular materials by the mercury method with vacuum.
NF X10-511:1971 Vacuum technology-positive-displacement vacuum pumps-measurement ofthe volume rate of flow (pumping speed).
NF EN 993-17:1999 Test methods for dense shaped refractory products - Part 17: determination of the apparent density of granular materials by the vacuum mercury method
NF ISO 21360-3:2019 Technique du vide - Méthodes normalisées pour mesurer les performances des pompes à vide - Partie 3 : paramètres spécifiques aux pompes à vide intermédiaires mécaniques
NF EN 993-18:2002 Test methods for dense shaped refractory products - Part 18: determination of the apparent density of granular materials by the vacuum water method
NF E29-723:1974 Vacuum technology high vacuum collars. Dimensions.

SE-SIS

SIS 70 50 18-1960 Vacuum flasks and tins. Methods of test

International Organization for Standardization (ISO)

ISO 7233:1991 Rubber and plastics hoses and hose assemblies; determination of suction resistance
ISO 7233:2021 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
ISO 7233:2016 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
ISO 7233:2006 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum
ISO 7233:1983 Rubber and plastics hoses and hose assemblies — Vacuum resistance — Methods of test
ISO/DIS 21360-5 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 5: NEG vacuum pumps
ISO 21360-6:2023 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 6: Cryo vacuum pumps
ISO/FDIS 21360-6:2023 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 6: Cryo vacuum pumps
ISO 19685:2017 Vacuum technology - Vacuum gauges - Specifications, calibration and measurement uncertainties for Pirani gauges
ISO/DIS 21360-6 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 6: Cryo vacuum pumps
ISO 21360-2:2012 Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 2: Positive displacement vacuum pumps
ISO 21360-2:2020 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 2: Positive displacement vacuum pumps
ISO 21360-4:2018 Vacuum technology - Standard methods for measuring vacuum-pump performance - Part 4: Turbomolecular vacuum pumps
ISO 5018:1983 Refractory materials; Determination of true density
ISO/DTS 6737:2023 Vacuum technology — Vacuum gauges — Characteristics for a stable ionisation vacuum gauge
ISO/CD TS 6737 Vacuum technology — Vacuum gauges — Characteristics for a stable ionisation vacuum gauge
ISO 27894:2009 Vacuum technology - Vacuum gauges - Specifications for hot cathode ionization gauges
ISO/TS 6737:2023 Vacuum technology — Vacuum gauges — Characteristics for a stable ionisation vacuum gauge
ISO/FDIS 21360-5:2023 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 5: Non-evaporable getter (NEG) vacuum pumps
ISO 21360-5:2023 Vacuum technology — Standard methods for measuring vacuum-pump performance — Part 5: Non-evaporable getter (NEG) vacuum pumps
ISO/TS 20177:2018 Vacuum technology - Vacuum gauges - Procedures to measure and report outgassing rates
ISO/TS 20175:2018 Vacuum technology - Vacuum gauges - Characterization of quadrupole mass spectrometers for partial pressure measurement
ISO 21360:2007 Vacuum technology - Standard methods for measuring vacuum-pump performance - General description
ISO 21360-3:2019 Vacuum technology — Standard methods for measuring vacuum pump performance — Part 3: Specific parameters for mechanical booster vacuum pumps

GSO

GSO ISO 7233:2015 Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum
BH GSO ISO 7233:2016 Rubber and plastics hoses and hose assemblies -- Determination of resistance to vacuum
GSO ISO 21360-2:2016 Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 2: Positive displacement vacuum pumps
BH GSO ISO 20146:2022 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
OS GSO ISO 21360-2:2016 Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 2: Positive displacement vacuum pumps
GSO ISO 20146:2021 Vacuum technology — Vacuum gauges — Specifications, calibration and measurement uncertainties for capacitance diaphragm gauges
GSO ISO 5018:2017 Refractory materials -- Determination of true density
OS GSO ISO 5018:2017 Refractory materials -- Determination of true density
GSO ISO/TS 20177:2024 Vacuum technology — Vacuum gauges — Procedures to measure and report outgassing rates

Indonesia Standards

SNI 13-3477-1994 Coal, Determination of moisture content of sample in dried air

International Electrotechnical Commission (IEC)

IEC 60312-2:2010 Vacuum cleaners for household use – Part 2: Wet cleaning appliances – Methods of measuring the performance (Edition 1.0)
IEC 60312:2007 Vacuum cleaners for household use - Methods of measuring the performance
IEC 60312/AMD1:2000 Vacuum cleaners for household use - Methods of measuring the performance; Amendment 1
IEC PAS 62611:2009 Vacuum cleaners for commercial use - Methods of measuring the performance

American Society for Testing and Materials (ASTM)

ASTM C1667-09 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM C1667-07 Standard Test Method for Using Heat Flow Meter Apparatus to Measure the Center-of-Panel Thermal Resistivity of Vacuum Panels
ASTM F450-01(2005) Standard Test Methods for Vacuum Cleaner Hose8212;Durability and Reliability (Plastic Wire Reinforced)
ASTM F558-17 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F450-09 Standard Test Methods for Vacuum Cleaner Hose x2014; Durability and Reliability (Plastic)
ASTM F558-21 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F558-06 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F558-17a Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F558-18 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F558-13 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM RR-F11-1002 1981 F0558-Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F820-06 Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
ASTM F558-03 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F450-13(2019) Standard Test Methods for Vacuum Cleaner Hose—Durability and Reliability (Plastic)
ASTM F450-13 Standard Test Methods for Vacuum Cleaner Hosemdash;Durability and Reliability (Plastic)
ASTM D6653/D6653M-01(2010)e1 Standard Test Methods for Determining the Effects of High Altitude on Packaging Systems by Vacuum Method
ASTM F558-11 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F558-24 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners
ASTM F595-01(2005) Standard Test Methods for Vacuum Cleaner Hose&8212;Durability and Reliability (All-Plastic Hose)
ASTM RR-F02-1027 2009 F2338-Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM C830-00(2006)e1 Standard Test Methods for Apparent Porosity, Liquid Absorption, Apparent Specific Gravity, and Bulk Density of Refractory Shapes by Vacuum Pressure
ASTM D4991-94(1999) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM F820-17 Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems
ASTM RR-F02-1019 2003 F2338-Test Method for Nondestructive Detection of Leaks in Packages by Vacuum Decay Method
ASTM C1338-19 Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM C1338-19(2022) Standard Test Method for Determining Fungi Resistance of Insulation Materials and Facings
ASTM F1326-96 Standard Test Method for Measuring Maximum Dry Volume of Utility Vacuum Cleaners
ASTM D4991-07(2015) Standard Test Method for Leakage Testing of Empty Rigid Containers by Vacuum Method
ASTM RR-F11-1003 1983 D0820-Standard Test Method for Measuring Air Performance Characteristics of Central Vacuum Cleaning Systems

German Institute for Standardization

DIN EN ISO 7233:2021-08 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021); German version EN ISO 7233:2021
DIN EN ISO 7233:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2006); German version EN ISO 7233:2008
DIN EN ISO 7233 E:2015-10 Determination of vacuum resistance of rubber and plastic hoses and hose assemblies (draft)
DIN EN ISO 7233 E:2020-02 Determination of vacuum resistance of rubber and plastic hoses and hose assemblies (draft)
DIN EN 993-18:2002 Methods of test for dense shaped refractory products - Part 18: Determination of bulk density of granular materials by the water method with vacuum; German version EN 993-18:2002
DIN CEN/TS 15083-2:2005-10 Durability of wood and wood-based products - Determination of the natural durability of solid wood against wood-destroying fungi, test methods - Part 2: Soft rotting micro-fungi; German version CEN/TS 15083-2:2005
DIN 28426-1:1983 Vacuum technology; acceptance specifications for rotary plunger vacuum pumps, sliding vane rotary vacuum pumps and rotary piston vacuum pumps for the ranges of rough and medium vacuum
DIN EN 993-17:1999-01 Methods of test for dense shaped refractory products - Part 17: Determination of bulk density of granular materials by the mercury method with vakuum; German version EN 993-17:1998
DIN 3266:1979 Valves for drinking water installations on private premises - Anti-vacuum valve Types D and E - Requirements and tests

Japanese Industrial Standards Committee (JISC)

JIS K 6330-3:2014 Testing methods for rubber and plastics hoses and hose assemblies -- Part 3: Determination of resistance to vacuum
JIS B 8329-2:2015 Vacuum technology -- Standard methods for measuring vacuum-pump performance -- Part 2: Positive displacement vacuum pumps
JIS Z 8129:2014 Vacuum technology -- Vacuum gauges -- Specifications for hot cathode ionization gauges

American National Standards Institute （ANSI)

ANSI/ASTM F450:2013 Test Methods for Vacuum Cleaner Hose - Durability and Reliability (Plastic)
ANSI/ASTM F595:2001 Methods for Testing Vacuum Cleaner Hose for Durability and Reliability (All-Plastic Hose)
ANSI/ASTM F558:2013 Test Method For Measuring Air Performance Characteristics Of Vacuum Cleaners
ANSI/ASSE 1056-2013 Performance Requirements for Spill Resistant Vacuum Breaker Assemblies
ANSI/ASTM F655:2013 SPECIFICATION FOR TEST CARPETS AND PADS FOR VACUUM CLEANER TESTING
ANSI/ASTM F558:2021 Standard Test Method for Measuring Air Performance Characteristics of Vacuum Cleaners

GOST

GOST 32974.2-2023 Vacuum technology. Standard methods for measuring vacuum-pump performance. Part 2. Positive displacement vacuum pumps
GOST 32974.4-2023 Vacuum technology. Standard methods for measuring vacuum pump performance. Part 4. Turbomolecular vacuum pumps

CZ-CSN

CSN ISO 5018:1994 Refractory materials.Determination of true density
CSN 91 7825 Cast.2-1981 The testing of floor materials Fungal resistance: of floor materials. The plain resistance test.
CSN 10 7065-1973 Methods of measuxement of -the perfor-mance characteristiCiS of diffusion, ejecbor and booster vaccuuin pum:ps,_ Measurement oí the volume rate of flow
CSN 91 7825 Cast.1-1981 The testing of floor materials Genaral retermance of floor materials General requirements
CSN 36 1413-1974 Testing methods of functional parametcrs of electric vacuum cleancrs
CSN 10 7234-1982 Vacuum technology. Fittings for vacuum connections
CSN 25 7072-1987 Pressure gauges. Flexible manometric elements of manometers, pressure-va-cuum gauges and vacuum meters. General technical requirements and test methods

RO-ASRO

STAS 649-1983 Wood DETERMINATION OF DURA- BIL ITY ON MYCOLOGICAL WAY
STAS 3590-1964 Measuring tools. Commonly used pressure gauges, vacuum gauges and vacuum pressure gauges. Normal and operating pressure, scale

FI-SFS

SFS 5249-1986 Household appliances. Capacity testing method. vacuum cleaner

YU-JUS

JUS G.S3.105-1991 Rubber and plastics hoses and hose assemblies .Vacuum resistance.Methods of test
JUS B.D8.302-1984 Refractories. Methods of fisical testing. Determination of true density refractorl products and raw materials

Lithuanian Standards Office

LST ISO 5018:1998 Refractory materials. Determination of true density
LST EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)
LST EN ISO 7233:2008 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2006)

VN-TCVN

TCVN 6530-2-1999 Refractories.Methods of test.Part 2: Determination of true density

(U.S.) Joint Electron Device Engineering Council Soild State Technology Association

JEDEC JESD5-1982 Mesurement of Temperature Coefficient of Voltage Regulator Diodes

IN-BIS

IS 1528 Pt.9-1980 Methods for Sampling and Physical Testing of Refractory Materials Part IX Determination of True Specific Gravity and True Density

North Atlantic Treaty Organization Standards Agency

STANAG 4556-1999 EXPLOSIVES, VACUUM STABILITY TEST

CH-SNV

SN EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)

AT-ON

OENORM EN ISO 7233:2021 Rubber and plastics hoses and hose assemblies - Determination of resistance to vacuum (ISO 7233:2021)

ASHRAE - American Society of Heating@ Refrigerating and Air-Conditioning Engineers@ Inc.

ASHRAE 4708-2004 Calibration and Testing of Thermal Simulation Models of Air Heaters

U.S. Military Regulations and Norms

ARMY MIL-PRF-49319 A-1997 DETECTOR-DEWAR, DT-591B/UA