Mold seal groove

Mold seal groove, Total:119 items.

The international standard classification for "Mold seal groove" includes: Components for aerospace construction , Seals for pipe and hose assemblies , Seals , Filters, seals and contamination of fluids .

The Chinese standard classification for "Mold seal groove" includes: Pipe fittings, clamps and seals , Measuring devices , Rubber seal , Hydraulic and pneumatic device , Sealing and sealing device , Pipeline fittings .

---

Professional Standard - Aviation

• HB 2575-1976 sealing ring
• HB 5585-1983 rubber sealed loop
• HB 7466-1996 Flexible Graphite Seal Ring
• HB 7520-1997 O-shaped Rubber Seal - Groove
• HB 5584-1981 rubber sealed loop
• HB 6813.8-1993 Parts for Pneumatic Micrometer - Rubber Seal (d=8.1~12.1)
• HB 956-2000 sealing ring
• HB 6692-1993 Phosphate ester hydraulic oil resistant O-ring rubber seal groove
• HB 953-2000 U-shaped sealing ring
• HB 5584-1983 rubber sealed loop
• HB 5585-1981 rubber sealed loop

Professional Standard - Aerospace

• QJ 312-1978 sealing ring
• QJ 1763.5-1989 Typical structure of rubber mold O-ring seal rubber die
• QJ 1035.1-1986 O-shaped Rubber Sealing Ring

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

• GB/T 10708.1-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 1 : Rubber seals of act on single seal
• GB/T 3452.3-2005 Housing dimensions for O - ring elastomer seals in hydraulic and pneumatic applications
• GB/T 10708.2-2000 Reciprocating rubber seals; Design criteria for standard applications; Part 2:Rubber seals of act on double seal

Professional Standard - Machinery

• JB/ZQ 4784-2006 Seal washer
• JB/T 982-1977 Combined Sealing Washer
• JB/ZQ 4264-2006 Yx-shaped seal ring for holes
• JB/T 1002-1977 Gasket
• JB/T 6994-1993 VD rubber sealing ring
• JB/T 6658-1993 Groove dimensions and tolerances of O-ring rubber seals for pneumatic applications
• JB/ZQ 4265-2006 Yx-shaped Seal Ring for Axis
• JB/ZQ 4224-2006 O-shaped rubber seal ring
• JB/T 6658-2007 Housing dimensions and tolerances of O-ring rubber seal applicable to pneumatic
• JB/T 6376-1992 Groove dimensions and tolerances of rubber seal rings for pneumatic valves
• JB/ZQ 4245-2006 Labyrinth seal groove
• JB/T 1735-1991 Bottom valve disc sealing ring
• JB/T 6656-1993 Installation Groove for Sealing Rings Intended to Be Used in Air Cylinders Type, Main Dimensions and Tolerance

未注明发布机构

• DIN 470 E:2008-10 Sealing washers

Professional Standard - Automobile

• QC/T 638-2000 Gasket
• QC/T 638-2023 Sealing washer

Military Standard of the People's Republic of China-General Armament Department

• GJB 125.6.1A-1989 Double-ear seal traveling self-locking nut sealing ring
• GJB 125.6-1986 Double-ear seal traveling self-locking nut sealing ring
• GJB 125.6.2A-1989 Double-ear seal traveling self-locking nut sealing ring

机械电子工业部

• JB 1735-1991 Bottom valve disc seal

工业和信息化部

• HG/T 5839-2021 Gas spring seal ring

Society of Automotive Engineers (SAE)

• SAE ARP674C-2001 (R) Groove Design, Metal O-Ring Gasket
• SAE AS27198-2001 Seal, Plain, Rubber (-65 to +350°F Fuel Resistant), Mold in Groove
• SAE RS-734-1-1979 RS734 Groove Dimensions for Gaskets (Metallic Seals)
• SAE AS27197C-2019 SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, SILICONE RUBBER, AMS7268
• SAE AS27195B-2019 SEAL, BONDED, ALUMINIM ALLOY 6061-T6, AMS4027, MOLD IN GROOVE, NBR RUBBER, AMS-R-7362
• SAE AS27198C-2019 SEAL, BONDED, 302 CORROSION RESISTANT STEEL, AMS5516, MOLD IN GROOVE, FLUOROSILICONE RUBBER, MIL-DTL-25988
• SAE AS3387-1-1951 AS3387 Sealing Ring
• SAE AS3393-1-1951 AS3393 Sealing Ring
• SAE AS3381-1-1951 AS3381 Sealing Ring
• SAE AS27198A-2008 Seal, Plain, Rubber, (-65 to + 350 Degrees F Fuel Resistant), Mold in Groove
• SAE J281A-1977 SEALING RINGS–CAST IRON
• SAE J281-1992 Cast Iron Sealing Rings
• SAE AS3112-1-1948 AS3112 Sealing Washer
• SAE AS63850-2-2003 AS63850-864 Sealing Ring
• SAE AS2516-3-2015 AS2516 Sealing Washer
• SAE AS2598-5-1946 AS2598 Filler Sealing Ring
• SAE AS5364-6-2015 AS5364 Filler Sealing Ring
• SAE AGS3820-1-1968 AGS3820-869 Washer, Seal, Flat
• SAE J1236-1993 CAST IRON SEALING RINGS (METRIC)
• SAE AMS7320-1940 SEALING RINGS Bronze Castings
• SAE AS3085-1974 Packing, Preformed - AMS 7280,'O' Ring
• SAE J1236-2015 Cast Iron Sealing Rings (Metric)
• SAE AMS7322-1940 SEALING RINGS Bronze Castings
• SAE AS5728-2009 Packing, Preformed, O-Ring Molded from AMS 7268 Material

Japanese Industrial Standards Committee (JISC)

• JIS B 2406:1991 O-rings housings -- Design criteria
• JIS B 2401-4:2012 O-rings -- Part 4: Anti-extrusion rings (back-up rings)
• JIS B 2401-1:2012 O-rings -- Part 1: O-rings
• JIS B 2401:1999 O-rings
• JIS B 2401:1991 O-rings
• JIS B 2407:1995 Back-up rings for O-rings

SAE - SAE International

• SAE AS27197A-2008 Seal@ Plain@ Rubber@ (Hot Air Resistant 400 Degree F)@ Mold in Groove
• SAE AS27197-2001 Seal@ Plain@ Rubber@ (Hot Air Resistant 400 Degree F)@ Mold in Groove
• SAE J281-1980 CAST IRON SEALING RINGS

U.S. Military Regulations and Norms

• ARMY MIL-O-70548 NOTICE 3-2009 OBURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-70548-1986 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-70548 REINST NOTICE 2-1997 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71130-1992 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-70548 (6)-1997 OBTURATING BAND, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71152-1993 OBTURATING RING, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71152 REINST NOTICE 2-1996 OBTURATING RING, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71152 (2)-2001 OBTURATING RING, PLASTIC SPLIT (MOLDED)
• ARMY MIL-O-71130 REINST NOTICE 2-1996 OBTURATING BAND, PLASTIC SPLIT (MOLDED)

British Standards Institution (BSI)

• BS ISO 3601-4:2008 Fluid power systems - O-rings - Anti-extrusion rings (back-up rings)

German Institute for Standardization

• DIN 7603:2001-05 Sealing rings
• DIN 470:2011-03 Sealing washers
• DIN 470:2011 Sealing washers
• DIN 470:1974 Sealing Washers

Defense Logistics Agency

• DLA AN996 REV 2 (1)-2002 RING - LOCK
• DLA AN996 REV 2-1974 RING - LOCK

RO-ASRO

• STAS 7319-1971 Seals for muchiile building HOUSINGS FOR O RINGS
• STAS 4218-1977 FELT FOR GASKETS
• STAS 7320/3-1983 Scals for machine building HOUSING FOR O RINGS Dimcnsions
• STAS 5891-1988 METALLIC SEAL IN G CAPS
• STAS 7513/4-1974 Agglomerated cork boards for gaskets BOARDS FOR PROTECTION GASKETS TYPE B

Association Francaise de Normalisation

• NF E29-584:1979 Sealing washers.

International Organization for Standardization (ISO)

• ISO 3601-4:2008 Fluid power systems - O-rings - Part 4: Anti-extrusion rings (back-up rings)

Korean Agency for Technology and Standards (KATS)

• KS K 9323-2008 Double flange rings(Reversible type)
• KS K 9323-1983 Double flange rings(Reversible type)
• KS K 9322-2000 Porous sintered metal single flange rings
• KS K 9322-1985 Porous sintered metal single flange rings

IT-UNI

• UNI 2211-1954 Gaskets for bulkhead seal channels
• UNI 6899-1971 Pump mechanical seal device groove. There are wire braided gaskets. Interchangeable

RU-GOST R

• GOST 24191-1980 Packing hoop. Design

CZ-CSN

• CSN 37 0189-1985 Sealing washers for electrical cablcs
• CSN 02 3655-1974 Seals for housings. Felt seal and groove
• CSN ON 02 9310-1963 Seals for exhaust

Aeronautical Radio Inc.

• ARINC 654 ITEM 8.0 Environmental Sealing Gaskets

Underwriters Laboratories (UL)

• UL 157-2015 UL Standard for Safety Gaskets and Seals
• UL 157-1996 UL Standard for Safety Gaskets and Seals Second Edition; Reprint with Revisions Through and Including March 12, 2007

NO-SN

• NS 171-1968 Sealing constructions for flanges - NP 10 - 100 - Sealing: Tongue and groove
• NS 173-1968 Sealing constructions for flanges - NP 10 - 100 - Sealing: O-ring

SCC

• DIN 470 E:2008 Draft Document - Sealing washers
• NS 171:1968 Sealing constructions for flanges — NP 10 — 100 — Sealing: Tongue and groove
• NS 173:1968 Sealing constructions for flanges — NP 10 — 100 — Sealing: O-ring
• NS 186:1968 Sealings for flanges with tongue and groove

American Society for Testing and Materials (ASTM)

• ASTM F112-00(2013) Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00e1 Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00(2019) Standard Test Method for Sealability of Enveloped Gaskets
• ASTM F112-00(2006) Standard Test Method for Sealability of Enveloped Gaskets

GM North America

• GM221M-2002 Grommets Underhood Revision A
• GM GM9909P-2004 Seals Abrasion Resistance

Others: Seal groove