Three-wire liquid level meter wiring method

Three-wire liquid level meter wiring method, Total:98 items.

The international standard classification for "Three-wire liquid level meter wiring method" includes: Metallic coatings , Transport by rail , Filters, seals and contamination of fluids , Industrial process measurement and control , Navigation and control equipment .

The Chinese standard classification for "Three-wire liquid level meter wiring method" includes: Computer application , Technical Management , Technical management , Railway transport in general , Hydraulic and pneumatic device , Industrial automation and control device in general , Railway signals in general , Management, utilization and service of shore station communication equipment , .

Professional Standard - Aviation

HB/Z 5091.1-1999 Analysis Method for Chrome Plating Solution Determination of Chromium Trioxide Content Through Potentiometric Titration
HB/Z 5109.3-2001 Analysis method for passivation solution Determination of chromium trioxide in zinc plating, cadmium plating triacid passivation solution through potentiometric titration
HB 7692-2001 The bus line inside 32 airborne computers

Professional Standard - Electron

SJ/T 10148.6-1991 Preparation methods for electrical skeletons--Terminal diagram and table
SJ/T 10148.7-1991 Preparation methods for electrical skeletons--Connection diagram and table for cable and line
SJ/Z 9096.3-1987 Methods of measurement for radio transmitters-Part 3: Wanted and unwanted modulation
SJ 2534.8-1986 Test procedrues for antennas - Phase measurement
SJ 2534.2-1985 Test procedures for antennas-Antenna-range design

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 25926-2010 Industrial-process measurement and control instrument panels—Methods of drawing the wiring and piping diagrams
GB/T 21540-2022 Hydraulic fluid power—On-line automatic particle-counting systems for liquids—Methods of calibration and validation
GB/T 21540-2008 Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
GB/T 13231-1991 Calculated methods of carrying capacity for receiving and dispatching tracks at railway marshalling station(3-stage/3-yard)

国家能源局

SY/T 7383-2017 The calibration method of the liquid level measuring devices

机械电子工业部

JB/T 5875-1991 How to draw wiring diagrams and wiring tables for low-voltage complete switchgear

Professional Standard - Railway

TB/T 2080-1989 Drawing Method of Wiring Diagram for Railway Signal Product

Group Standards of the People's Republic of China

T/CMA HG110-2023 Calibration Method for On-Line Turbidimeters
T/QGCML 188-2021 High-voltage transmission line conductor connection method
T/QGCML 2927-2024 Power factor controller installation process and wiring method
T/CSTM 01102-2023-2023 Original position statistic distribution analysis of composition in weld joints - Microbeam X-ray fluorescence spectrometry method

Military Standard of the People's Republic of China-General Armament Department

GJB/Z 70-1995 Very low frequency (VLF) radio system radio wave field strength and phase calculation method
GJB 7972-2012 Preparation method of tri-uranium octoxide isotopic reference materials

Professional Standard - Machinery

JB/T 1397-1991 Drawing Method for Wiring and Piping Diagram of Panel for Industrial-process Measurement and Control Equipment

Professional Standard - Coal

MT/T 487-1995 Test Methods of Cycloid Hydraulic Motor Used for Mine
MT/T 691-1997 Determination of electrostatic potential in detonator production line

国家煤矿安全监察局

MT 691-1997 Determination of electrostatic potential in detonator production line

Professional Standard - Traffic

JT/T 75-2007 Operational specification of manual console between maretime mobile radiocommunication and PABX or PSTN for communicating

Tianjin Provincial Standard of the People's Republic of China

DB12/ 046.96-2011 Calculation method and limit of comprehensive energy consumption per unit output of products Part 96: Steel strand
DB12/ 046.15-2011 Calculation method and limit of comprehensive energy consumption per unit output of products Part 15: Wire Rod

Professional Standard - Electricity

DL/T 691-2019 Calculation method of radio interference from high voltage overhead power transmission lines
DL/T 691-1999 Methods of calculation of radio interference from high voltage overhead power transmission lines
DL/T 691-2019(英文版) Calculation method for radio interference of high-voltage overhead transmission lines

Canadian General Standards Board （CGSB)

CAN/CGSB-4.2 NO.5.2-M87-1987 Textile Test Methods Linear Density of Yarn in SI Units
CGSB 4.2 NO. 5.2-M87-CAN/CGSB-1987 Methodes Pour Epreuves Textiles Masse Lineique Du Fil En Unites SI
CGSB 4.2 NO. 8.2-2004-CAN/CGSB-2004 Textile testing methods Textiles Determination of yarn twist Direct counting method

IX-SA

AS 1010:1972 Method for determination of linear density of packaged textile yarns in metric units

RU-GOST R

GOST 22506-1983 Three-programme wire broadcasting receivers. Methods of measurements
GOST R ISO 11943-2010 Hydraulic fluid power. On-line automatic particle-counting systems for liquids. Methods of calibration and validation
GOST 27447-1987 Electromechanical components. Orientation test of connectors
GOST R 53363-2009 Digital radio-relay links. Quality parameters. Calculation methods
GOST 32679-2014 Contact line for railway. Technical requirements and control methods
GOST R 52074-2003 Bus serial interface of electronic modules system. Test-plan for interface modules, functioning as bus controller. General requirements for test methods
GOST R 51739-2001 Bus serial interface for system of electronic modules. Validation test-plan for interfacing module, functioning as bus controller. General requirements for test methods
GOST R 51544-2000 Hydraulically operated portable emergency and rescue tools. Spools with hydraulic lines. Basic parameters and dimensions. Methods of testing and control

ECIA - Electronic Components Industry Association

214-1958 Calculation of Current Ratings on Hookup Wire@ Method for

International Code Council

ICC IOTFDC-1998 CHAPTER 43-1998 Wiring Methods

Building Officials and Code Administrators International(U.S.)

BOCA IOTFDC-1998 CHAPTER 43-1998 Wiring Methods

JSAE - Society of Automotive Engineers of Japan@ Inc.

JASO C453-1982 Test Method for Brake Fluid Level System

Society of Automotive Engineers (SAE)

SAE AS1043F-2013 SAFETY WIRE HOLES, HEX, FITTING, LOCATION OF, DESIGN STANDARD
SAE AS1043H-2018 SAFETY WIRE HOLES, HEX, FITTING, LOCATION OF, DESIGN STANDARD
SAE ARP1928A-2004 Torque Recommendations for Attaching Electrical Wiring Devices to Terminal Boards or Blocks, Studs, Posts, etc.

Defense Logistics Agency

DLA DSCC-DWG-85151 REV E-2000 DELAY LINE, THREE DELAY LINE UNITS, 14 PIN DIP COMPATIBLE, TTL INTERFACED
DLA SMD-5962-02508 REV C-2007 MICROCIRCUIT, DIGITAL, LOW VOLTAGE CMOS, 16-BIT BUS TRANSCEIVER WITH BUS HOLD AND THREE-STATE OUTPUTS, MONOLITHIC SILICON

GSO

OS GSO 1571:2002 Overhead electrical conductors - Calculation methods for stranded bare conductors
GSO 1517:2002 Overhead electrical conductors - Calculation methods for stranded bare conductors
GSO ISO 11943:2015 Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation

Association Francaise de Normalisation

NF G01-001:1985 Textiles. Expression of linear density. Tex system.
NF E48-682*NF ISO 11943:2021 Hydraulic fluid power - Online automatic particle-counting systems for liquids - Methods of calibration and validation

SCC

BS 2085:1973 Method of test for determination of twist in yarns, direct counting method
CAN/CGSB-4.2 No./No.5.2-M87-1987 Textile testing methods Linear mass of yarn in SI units
IEC 60393-3:1977 Potentiometers - Part 3: Sectional specification: Single-turn rotary wirewound and non-wirewound precision potentionmeters - Selection of methods of test and general requirements
DANSK DS/IEC TR 61597:2021 Overhead electrical conductors – Calculation methods for stranded bare conductors
BS 2862:1984 Methods for determination of number of threads per unit length
AS 1660.4:1974 Methods of test for electric cables and flexible cords (including conductors, insulation and sheath), Part 4: Test methods for complete flexible cords - Metric Units
AS 1181:1971 Method of measurement of civil engineering quantities (metric units)

SAE - SAE International

SAE AS1043F-1992 Safety Wire Holes@ Hex@ Fitting@ Location of@ Design Standard (FSC 4720)

American Society for Testing and Materials (ASTM)

ASTM D1423-99 Standard Test Method for Twist in Yarns by Direct-Counting
ASTM D1423-02 Standard Test Method for Twist in Yarns by Direct-Counting
ASTM D1423-02(2008) Standard Test Method for Twist in Yarns by Direct-Counting
ASTM D1423/D1423M-16(2022) Standard Test Method for Twist in Yarns by Direct-Counting
ASTM D1423/D1423M-16 Standard Test Method for Twist in Yarns by Direct-Counting

Korean Agency for Technology and Standards (KATS)

KS B ISO 11943-2008(2018) Hydraulic fluid power－On-line automatic particle-counting systems for liquids－Methods of calibration and validation
KS B ISO 11943:2008 Hydraulic fluid power－On-line automatic particle-counting systems for liquids－Methods of calibration and validation
KS B ISO 11943-2023 Hydraulic fluid power－On-line automatic particle-counting systems for liquids－Methods of calibration and validation
KS C 8111-2023 Testing methods for wiring devices
KS K 0421-2007 Determination of twist in yarns：Direct counting method
KS K 0421-2006 Determination of twist in yarns：Direct counting method
KS K 0421-1993 Determination of twist in yarns：Direct counting method
KS C 8111-2008(2018) Testing methods for wiring devices

KR-KS

KS K ISO 2061-2015 Textiles — Determination of twist in yarns — Direct counting method
KS B ISO 11943-2008(2023) Hydraulic fluid power－On-line automatic particle-counting systems for liquids－Methods of calibration and validation

VN-TCVN

TCVN 5788-2009 Standard Test Method for Twist in Yarns by Direct.Counting

CZ-CSN

CSN 25 7217-1984 Pressure gauges with lelemeasuring evice. Methods of verification

International Organization for Standardization (ISO)

ISO 11943:2018 Hydraulic fluid power - Online automatic particle-counting systems for liquids - Methods of calibration and validation
ISO 11943:1999 Hydraulic fluid power - On-line automatic particle-counting systems for liquids - Methods of calibration and validation
ISO 11943:2021 Hydraulic fluid power — Online automatic particle-counting systems for liquids — Methods of calibration and validation

British Standards Institution (BSI)

BS ISO 23346:2020 Radio-controlled clocks. Signal receiving measurement method
BS AU 176:1980 Method for establishment of eyellipses for driver's eye location
BS ISO 11943:2021 Hydraulic fluid power. Online automatic particle-counting systems for liquids. Methods of calibration and validation

ES-AENOR

UNE 20-546 Pt.5-1985 Potentiometer. Single-circuit low-voltage potentiometer with or without coil wire. Test methods and general requirements

CH-SNV

SEV 0178-1957 Winding wire. Detection method. Solution resistance of enameled wire insulation

PT-IPQ

E 178-1965 Instructions for line drawing

International Electrotechnical Commission (IEC)

IEC PAS 62338:2002 Screened balanced cables - Coupling attenuation measurement, triaxial method

ECMA - European Association for Standardizing Information and Communication Systems

ECMA 47-1976 Limits and Measurements Methods for Radio Interface from EDP Units

YU-JUS

JUS N.N6.190-1984 Radiocommunications. Cabled distribution and CA TV systems. Methods of measurements. Differential phase

Japanese Industrial Standards Committee (JISC)

JIS B 9935:2001 Hydraulic fluid power -- On-line automatic particle-counting systems for liquids -- Methods of calibration and validation

American National Standards Institute （ANSI)

ASME B5.64-2022 Methods for the Performance Evaluation of Single-Axis Linear Positioning Systems

GOST

GOST IEC 60034-7-2007 Electric rotating machines Part 7: Classification of designs depending on the mounting methods and location of the terminal box (IM code)

German Institute for Standardization

DIN 46397-31:2006 Spools for production of wires - Part 31: Test methods

Others: