National standard for medical plastic bottles

National standard for medical plastic bottles, Total:215 items.

The international standard classification for "National standard for medical plastic bottles" includes: Bottles. Pots. Jars , Packaging machinery , Cans. Tins. Tubes , Cases. Boxes. Crates , Plastics in general , Medical Sciences and health care facilities in general .

The Chinese standard classification for "National standard for medical plastic bottles" includes: Pharmaceutical processing machinery and equipment , Daily use plastic products , Storage equipment and handling machinery , Packaging material and container , Basic standards and general methods for synthetic resin and plastic , Packaging tool , Marking, packaing, transport and storage .

Professional Standard - Machinery

JB/T 20065.1-2005 Production line for plastic bottle pack
JB/T 20065.5-2014 Aluminium foil sealing machine
JB/T 20095-2007 Integrated Machine of Washing,Filling and Sealing for Plastic Infusion Bottle
JB/T 20065.2-2014 Plastic bottle unscrambler
JB/T 20066-2005 Easy-folding plastic-bottle oral liquid filling & sealing machine
JB/T 20065.2-2005 Manage bottle machine
JB/T 20066-2014 Easy-folding plastic-bottle oral liquid filling&sealing machine
JB/T 20065.1-2014 Production line for plastic bottles pack

Gansu Provincial Standard of the People's Republic of China

DB62/T 2667-2016 Plastic (PET) Bottles for Food

Group Standards of the People's Republic of China

T/SHBX 009-2022 One-step injection and blow molding bottles for ultra-clean filling oral liquid
T/QGCML 2194-2023 Bottled beverage cap blow mold parts
T/CATSI 02007-2020 Fully-wrapped carbon fiber reinforced cylinder with a plastic liner for the on-board storage of compressed hydrogen as a fuel for land vehicles
T/CSG 002-2020 Polypropylene material for manufacture of infusion bottle and upright infusion bag for medical use
T/CRRA 0103-2020 Specification for the recycling of plastic infusion bottle (bag)
T/FRRA 004-2023 Technical specifications for the recycling and reuse of disposable plastic infusion bottles (bags) that are not contaminated after use in medical institutions
T/XJSL 0002-2018 Disposable plastic yogurt cup(bottles;boxes;cans)
T/ZZB 2938-2022 Medical oxygen gas cylinders
T/GDPIA 38-2021 Technical specifications for recycling of waste plastic bottles
T/CVDA 6-2019 Veterinary oral liquid heat-seal plastic bottle
T/XJSL 0002-2024 Disposable plastic yogurt cup(bottles;boxes;cans)
T/YNZJ 006-2022 polyolefin plastic bottle
T/ZZB 1056-2019 Plastic vacuum bottle for cosmetic packaging
T/SYXB 0002-2019 Plastic vacuum bottle for cosmetic packaging
T/WJDGC 0001-2021 Plastic bottles for food packaging
T/CVDA 5-2019 Veterinary oral solid heat seal plastic bottle
T/QGCML 1453-2023 Technical specifications for hollow blow molding of polyethylene plastic bottles
T/CIET 094-2023 Plastic bottle for solid food packaging
T/MYXZX 004-2022 Polyethylene blow molded bottle for food

Professional Standard - Medicine

YY 0257-1997 Three stations injection blowing machine for molding plastic bottles
YY 0057-1991 Solid polyolefin plastic bottle for medical use

Xinjiang Provincial Standard of the People's Republic of China

DB65/T 2831-2007 Plastie bottle (drum) embryo

Shanghai Provincial Standard of the People's Republic of China

DB31/ 50-1990 PET plastic bottle for food packaging

Taiwan Provincial Standard of the People's Republic of China

CNS 9640-1984 Disposable Plastic Syringes for Medical Use
CNS 14624.2-2002 Infusion equipment for medical use-part 2： Closures for infusion bottles
CNS 14624-2-2002 Infusion equipment for medical use-part 2： Closures for infusion bottles
CNS 2444-1990 Polyethylene Bottle
CNS 2445-1990 Method of Test for Polyethylene Bottle
CNS 2829-1979 Carrier, Medical Oxygen Cylinder
CNS 14624.7-2002 Infusion equipment for medical use-Part 7：Caps made of aluminum-plastics combinations for infusion bottles
CNS 14624-7-2002 Infusion equipment for medical use-Part 7：Caps made of aluminum-plastics combinations for infusion bottles

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 41345-2022 General technical requirements for compression mould for plastic closure

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1330-2011 General technical requirements for ordinary plastic bottle caps

Professional Standard-Packaging

BB/T 0025-2004 30/25mm plastic pilferproof closure
BB/T 0044-2007 Packing containers-Plastic bottle for packing of pesticides

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 15223-2008 Plastics - Liquid resins - Determination of density by the pyknometer method
GB/T 17876-2010 Packaging container - Tamper-evident plastic closure
GB/T 38463-2020 General specification for ultra-clean plastic bottle filling machine
GB/T 26995-2011 General specification for rinsing-filling-capping machine of plastic bottle
GB/T 5738-1995 crates for beverage bottled
GB/T 17876-1999 Packaging volume plastic pilferproof closure

Professional Standard - Chemical Industry

HG 2948-1988(1997) Medicinal rubber closures for the infusion
HG 2948-1997 Medical infusion rubber bottle stopper
HG 2948-1988 Medical infusion rubber bottle stopper

未注明发布机构

DIN EN ISO 8872 E:2021-12 General requirements and test methods for aluminum caps and aluminum/plastic caps for infusion and injection bottles (draft)
DIN 13145 E:2008-09 Medical instruments - Mallet of plastic material

Hunan Provincial Standard of the People's Republic of China

DB43/T 2839-2023 General technical requirements for non-anti-theft plastic bottle caps for food contact

Professional Standard - Pharmaceutical Packaging

YBB 0040-2003 Shuyepingyong Lvsu Zuhe Gai Caps made of aluminium-plastics combinations for Infusion Bottles

工业和信息化部

QB/T 5585-2021 Tamper-evident plastic closure - Determination of the removal stress

GSO

BH GSO 2688:2023 Plastic Bottles Used for Water Bottling (Water Flasks)
GSO 2688:2022 Plastic Bottles Used for Water Bottling (Water Flasks)
OS GSO 132:2012 Plastic Bottles Used for Bottling Chemical Materilas and Products
GSO ISO 8536-7:2013 Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles
OS GSO ISO 8536-7:2013 Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles
GSO 132:2012 Plastic Bottles Used for Bottling Chemical Materilas and Products
GSO ISO 5215:2024 Laboratory plastic ware — Volumetric flasks
GSO ISO 32:2013 Gas cylinders for medical use – Marking for identification of content
OS GSO ISO 32:2013 Gas cylinders for medical use – Marking for identification of content
BH GSO ISO 32:2015 Gas cylinders for medical use – Marking for identification of content
GSO ASTM F639:2021 Standard Specification for Polyethylene Plastics for Medical Applications
GSO ASTM F619:2021 Standard Practice for Extraction of Medical Plastics
BH GSO ASTM F619:2022 Standard Practice for Extraction of Medical Plastics

British Standards Institution (BSI)

BS ISO 8536-7:2013 Infusion equipment for medical use. Caps made of aluminium-plastics combinations for infusion bottles
BS ISO 8536-7:2009 Infusion equipment for medical use - Caps made of aluminium-plastics combinations for infusion bottles
BS ISO 24166-3:2022 Snap-on bottles for metering pumps - Plastic
BS ISO 8536-7:2009(2013) Infusion equipment for medical use Part 7 : Caps made of aluminium - plastics combinations for infusion bottles
BS 6728-2:1993 Thermoplastics hot water bottles - Specification for hot water bottles manufactured from polyolefin materials
BS ISO 5215:2022 Laboratory plastic ware. Volumetric flasks
BS 5452:1977 Specification for hospital hollow-ware made of plastics material
BS ISO 8536-6:2016 Infusion equipment for medical use. Freeze drying closures for infusion bottles
BS EN ISO 8536-2:2023 Infusion equipment for medical use. Closures for infusion bottles
BS EN ISO 8536-2:2010 Infusion equipment for medical use - Closures for infusion bottles
BS EN 962:1997 Transportable gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
BS EN ISO 1183-3:1999 Plastics - Methods for determining the density of non-cellular plastics - Gas pyknometer method
BS EN ISO 8872:2022 Aluminium caps and aluminium/ plastic caps for infusion bottles and injection vials. General requirements and test methods
BS EN ISO 9187-1:2010 Injection equipment for medical use. Ampoules for injectables
BS EN ISO 8536-3:2009+A1:2022 Infusion equipment for medical use - Aluminium caps for infusion bottles
BS EN ISO 8536-1:2011 Infusion equipment for medical use. Infusion glass bottles

Indonesia Standards

SNI 12-1297-1989 Plastic field bottles
SNI 15-2125-1991 Glass bottles for drinks using hot filling
SNI 19-2946-1992 Plastics bottles for drugs, food and cosmetics
SNI 06-0939-2006 High density polyethylene (HPDE) for plastic bottles

Association Francaise de Normalisation

NF S93-126:1993 Infusion equipment for medical use. Part 7 : caps made of aluminium-plastics combinations for infusion bottles.
NF H35-065:1990 Bottling industrie. Plastic screw finish for flat products.
NF H35-032:1972 Plastic finishes, 26 and 29 for crown cork.
NF H35-036:1984 Bottling industry. Plastic screw finish. Parfumery type. Dimensions.
NF H35-090:1986 Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of diameter 29 and 35 mm, special for edible oil. Dimensions.
NF H35-024:1986 Bottling industry. Plastic finishes for ratched cap or sealable cap. Finishes of 26-39-32-36-44 diameters. Dimensions.
NF H35-066:1990 Bottling industry. Plastic screw finishes, diameter 28 and 31 - 1 thread for sparkling drinks. Dimensions.
NF EN ISO 1675:2022 Plastics - Liquid resins - Determination of density using the pycnometer method
NF H35-067:1990 Bottling industry. Plastic screw finish, 1 thread, diameter 28 for sparkling drinks with outlet gaps. Dimensions.

IN-BIS

IS 8688-1988 Specification for plastic drinking water bottles

VDI - Verein Deutscher Ingenieure

VDI 2017-2018 Medical-grade Plastics
VDI 2017-2019 Medical Grade Plastics (MGP)

Military Standards (MIL-STD)

DOD A-A-54875-1993 SPRAY BOTTLE, PLASTIC
DOD A-A-51770-1986 BOTTLE, SCREW CAP, (PLASTIC)
DOD A-A-53342-1988 BOTTLE, SCREW CAP, (PLASTIC SQUARE)

CZ-CSN

CSN 26 9311-1975 Plastic crates for bottles
CSN 26 9315-1986 Plastic crates. Verification of protective properties of bottle crates

SCC

AENOR UNE 53290:1975 Plastic materials. Bottles for trials.
UNE 53290:1975 PLASTICS. TEST BOTTLES
NS 2915:1969 Plastics foam hospital mattresses
AS 2472:1985 Valves for medical gas cylinders
AS 1944:1987 Medical gas cylinder identification
NS 4050:1968 Identification of medical gas cylinders
AS 1944:1984 Medical gas cylinder identification
BS 2718:1967 Gas cylinder trolleys for use in hospitals
BS 2718:1956 Gas cylinder trolleys for use in hospitals
BS 6728-1:1986 Thermoplastics hot water bottles-Specification for hot water bottles manufactured from PVC compounds
MIL MIL-S-36468A-1978 SPRAY BOTTLE, PLASTIC (S/S BY A-A-54875)
DANSK DS/ISO 5215:2022 Laboratory plastic ware – Volumetric flasks
DANSK DS/EN ISO 1675:1998 Plastics - Liquid resins - Determination of density by the pyknometer method
MIL MIL-B-36502-1966 BOTTLE, STOPPER, PLASTIC, ROUND (NO S/S DOCUMENT)
MIL MIL-N-36129-1962 NEBULIZER, MEDICINAL, PLASTIC (NO S/S DOCUMENT)
DANSK DS/ISO 8872:2022 Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials – General requirements and test methods
BS EN ISO 8536-2:2002 Infusion equipment for medical use-Closures for infusion bottles
BS EN ISO 8536-2:1999 Infusion equipment for medical use-Closures for infusion bottles
AS 2472:1981 Valves for medical gas cylinders (pin-indexed outlet)
AS 2472:1983 Valves for medical gas cylinders (pin-indexed outlet)
UNE 53169:1974 PLASTICS. PLASTIC BOTTLES, REJECTABLE, AND OF CAPACITY LOWER THAN 1 L FOR EDIBLE OILS. CHARACTERISTICS AND TEST METHODS
NS-EN ISO 1675:1998 Plastics — Liquid resins — Determination of density by the pyknometer method (ISO 1675:1985)
BS EN ISO 8536-3:1999 Infusion equipment for medical use-Aluminium caps for infusion bottles
BS EN ISO 8536-1:2008 Infusion equipment for medical use-Infusion glass bottles
DIN 13145 E:2008 Draft Document - Medical instruments - Mallet of plastic material
BS EN ISO 8536-1:2003 Infusion equipment for medical use-Infusion glass bottles
NS 635:1980 Glass transfusion bottles for medical use — Chemical resistance
NS 4052:1968 Yoke type valve connections for medical gas cylinders
BS 1319:1955 Specification for medical gas cylinders and anaesthetic apparatus
AS 2337.3:1998 Gas cylinder test stations - Inspection and testing of fibre reinforced plastics (FRP) gas cylinders
BS 1319:1946 Specification for medical gas cylinders and anaesthetic apparatus
MIL MIL-F-36747A-1975 FLASK, ERLENMEYER, GRADUATED, PLASTIC (S/S BY A-A-51104A)

KR-KS

KS P ISO 8536-7-2020 Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
KS P ISO 10985-2020 Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods

Korean Agency for Technology and Standards (KATS)

KS P ISO 8536-7:2020 Infusion equipment for medical use — Part 7: Caps made of aluminium-plastics combinations for infusion bottles
KS P ISO 8536-7:2009 Infusion equipment for medical use-Part 7:Caps made of aluminium-plastics combinations for infusion bottles
KS P ISO 8872-2023 Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials — General requirements and test methods
KS P ISO 10985:2020 Caps made of aluminium-plastics combinations for infusion bottles and injection vials — Requirements and test methods
KS B ISO 32-2013 Gas cylinders for medical use－Marking for identification of content
KS M ISO 1183-3-2003(2018) Plastics－Methods for determining the density of non-cellular plastics－Part 3：Gas pyknometer method

International Organization for Standardization (ISO)

ISO 8536-7:1992 Infusion equipment for medical use; part 7: caps made of aluminium-plastics combinations for infusion bottles
ISO 8536-7:2009 Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles
ISO 8536-7:1999 Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles
ISO 32:1977 Gas cylinders for medical use; Marking for identification of content
ISO 24166-3:2022 Snap-on bottles for metering pumps — Part 3: Plastic
ISO 5215:2022 Laboratory plastic ware — Volumetric flasks
ISO 1675:2022 Plastics — Liquid resins — Determination of density by the pycnometer method
ISO 1135-1:1987 Transfusion equipment for medical use; Part 1 : Glass transfusion bottles, closures and caps
ISO 1135-1:1986 Transfusion equipment for medical use — Part 1: Glass transfusion bottles, closures and bottle caps
ISO 8872:2022 Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials — General requirements and test methods
ISO 11117:1998 Gas cylinders - Valve protection caps and valve guards for industrial and medical gas cylinders - Design, construction and tests
ISO 407:1983 Small medical gas cylinders; Yoke-type valve connections

German Institute for Standardization

DIN ISO 8536-7:2009 Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles (ISO 8536-7:2009)
DIN ISO 8536-7:2009-12 Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles (ISO 8536-7:2009)
DIN 6094-5:2000 Packaging - Finishes - Part 5: Finishes for sparkling wine bottles with plastics and cork stoppers and crown corks
DIN 10457:1988 Apparatus for dairy analysis; sample bottles of plastic for milk
DIN 13145:2010 Medical instruments - Mallet of plastic material
DIN 13145:1979 Medical instruments; mallet of plastic material
DIN 55427:1983 Packaging means; plastic crates; 12 bottle size
DIN EN ISO 8872:2023-02 Aluminium caps and aluminium/plastic caps for infusion bottles and injection vials - General requirements and test methods (ISO 8872:2022); German version EN ISO 8872:2022

AT-ON

ONORM A 5225-1984 Bottle crate of plastic for 24 units 0,25 I wine-bottles
ONORM A 5227-1984 Bottle crate of plastic for 6 units 2 I wine-bottles
ONORM M 7375-1983 Marking of seamless gas cy linders for medical purposes

TH-TISI

TIS 1181-1993 Plastics babies bottles
TIS 517-1984 Standard for plastics bottles for pharmaceutical tablets and capsules
TIS 1095-1992 Standard for medical gas cylinder valve connections

Japanese Industrial Standards Committee (JISC)

JIS K 3603:1990 Plastic vials for frozen storage and ultra low-temperature preservation

NO-SN

NS 2915-1969 Plastics foam hospital mattresses

SE-SIS

SIS 84 50 22-1970 Plastic screw caps. Type B
SIS 84 50 21-1970 Plastic screw caps. Type A
SIS SS 84 53 14-1986 Glass bottles - Medicine bottles -Finish for snap-on closure
SIS 84 53 20-1971 Medicine glass bottles
SIS SMS 2231-1973 Gas cylinders for medical use Marking for Identification of the contents
SIS 84 50 02-1970 GL screw threads for plastic closures for glass containers

Aerospace Industries Association

AIA NAS 3438-1971 Vial, Plastic (Rev. 1)

AIA/NAS - Aerospace Industries Association of America Inc.

NAS3438-1971 Vial@ Plastic (Rev 1)
NAS3438-2012 VIAL@ PLASTIC (Rev 2)

ZA-SANS

SANS 5601:1975 Intracutaneous reactivity of plastics for medical use
SANS 5600:1978 Acute systemic toxicity of plastics for medical use
CKS 449-1976 Plastics (polyolefin) containers for general use in hospitals

TR-TSE

TS 3402-1979 GAS CYLINDERS FOR MEDICAL USE - MARKING FOR IDENTIFICATION OF CONTENT

IE-NSAI

I.S.61-1956 IDENTIFICATION OF MEDICAL GAS CYLINDERS

American National Standards Institute （ANSI)

ANSI/ASTM D2911:1994 Specification for Dimensions and Tolerances for Plastic Bottles

American Society for Testing and Materials (ASTM)

ASTM F639-98a Standard Specification for Polyethylene Plastics for Medical Applications
ASTM F639-09(2024) Standard Specification for Polyethylene Plastics for Medical Applications
ASTM D2911/D2911M-16(2023) Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM D2911-94 Standard Specification for Dimensions and Tolerances for Plastic Bottles
ASTM F619-14 Standard Practice for Extraction of Medical Plastics
ASTM D2911-94(2001) Standard Specification for Dimensions and Tolerances for Plastic Bottles

PL-PKN

PN Z78510-1972 Medical e?uipment Gas cylinders for medical use Marking of colours

Danish Standards Foundation

DS 938:1987 Gas cylinders for gases for medical use. Marking
DS/EN ISO 1675:1999 Plastics - Liquid resins - Determination of density by the pyknometer method
DS/ISO 1135-1:1993 Transfusion equipment for medical use. Part 1: Glass transfusion bottles, closures and caps
DS 728:1956 GAs cylinders for medical gases. Yoke type xonnections

VN-TCVN

TCVN 6293-1997 Gas cylinders.Gas cylinders for medical use.Marking for identification of content
TCVN 6591-3-2008 Infusion equipment for medical use.Part 3: Aluminium caps for infusion bottles

Malaysia Standards

MS 1503-2000 Plastics laboratory ware-wash bottles

Standard Association of Australia （SAA）

AS 2224.2:2009 Medical Measures Plastic

DIN

DIN ISO 8536-7:2001 Infusion equipment for medical use - Part 7: Caps made of aluminium-plastics combinations for infusion bottles (ISO 8536-7:1999)

European Committee for Standardization (CEN)

prEN 962-1992 Gas cylinders; valve protection caps and valve guards for industrial and medical gas cylinders; design, construction and tests
EN ISO 9187-1:2010 Injection equipment for medical use - Part 1: Ampoules for injectables (ISO 9187-1:2010)

North Atlantic Treaty Organization Standards Agency

STANAG 2121-2005 CROSS-SERVICING OF MEDICAL GAS CYLINDERS

NATO - North Atlantic Treaty Organization

STANAG 2121-2017 SERVICES MUTUELS POUR BOUTEILLES DE GAZ M?DICAUX (ED 5)
STANAG 2121-2012 SERVICES MUTUELS EN MATI?RE DE BOUTEILLES DE GAZ M?DICAUX (ED 4)

Compressed Gas Association (U.S.)

CGA M-4-2012 VALIDATION OF MEDICAL CYLINDER FILLING SYSTEMS

CEN - European Committee for Standardization

EN ISO 9187-1:2008 Injection equipment for medical use - Part 1: Ampoules for injectables
EN ISO 9187-1:1999 Injection Equipment for Medical Use - Part 1: Ampoules for Injectables (Incorporating Corrigenda May 1999 and October 1999)

Others: