Product accelerated vulcanization experiment

Product accelerated vulcanization experiment, Total:141 items.

The international standard classification for "Product accelerated vulcanization experiment" includes: Lamps in general , Products of the chemical industry , Environmental testing , Rubber , Aromatic hydrocarbons , Road transport , On-board equipment and instruments , Farming and forestry .

The Chinese standard classification for "Product accelerated vulcanization experiment" includes: Reliability and maintainability , Electric lighting in general , Basic standards and general methods for dye , Basic standards and general methods , Rubber products in general , Coal tar processed products , Highway transportation in general , Spacecraft control and guidance system , Standardization, quality management .

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 33720-2017 Accelerated test method of luminous flux depreciation for LED lighting products
GB/T 34986-2017 Methods for product accelerated testing
GB/T 33054-2016 Determination of content of sodium，sulfide in sulphur dye products

Professional Standard - Aviation

HB 5247-1993 Method for Accelerated Weathering Test in Hot Air for Vulcanized Sealant at Room Temperature

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 3512-2001 Rubber,vulcanized or thermoplastic--Accelerated ageing and heat resistance tests--Air-oven method
GB/T 3512-2014 Rubber, vulcanized or thermoplastic―Accelerated ageing and heat resistance tests
GB/T 8037-2009 Benzol products of coal carbonization—Test for presence of mercap tans
GB/T 29309-2012 Accelerated stress testing procedures for electric and electronic products—Guidance for highly accelerated life test
GB/T 32466-2015 Accelerated stress testing procedures for electric and electronic products — Guidance for highly accelerated stress screen
GB/T 8037-1987 Benzol products of coal carbonization--Test for presence of mercaptans

Professional Standard - Agriculture

水产品质量安全检验手册 7.6.2.1-2005 Chapter 7 Inspection of Additives in Aquatic Products Section 6 Determination of Bleach in Aquatic Products 2. Determination of Sulfur Dioxide (1) Rapid Qualitative Method

Group Standards of the People's Republic of China

T/ZSA 1001.01-2016 Luminous flux attenuation accelerated test method for LED lighting products
T/FSAS 21-2018 Laboratory specification for rapid detection of edible agricultural products
T/TTGA 001-2020 Medical and civil protective equipment – Accelerated aging tests
T/CSA 020-2013 Accelerating depreciation test method for LED lighting products

Professional Standard - Aerospace

QJ/T 815.2-1994 Acceleration Simulation Test Method for Road Transportation of Products
QJ 929-1985 Series and Type Spectrum for Accelerometer Product

Professional Standard - Machinery

JB/T 14612-2023 Test method for accelerated aging of silicon carbide special products by electric heating

Shanghai Provincial Standard of the People's Republic of China

DB31/T 987-2016 Technical criterion for rapid testing laboratory of agri-products at basic level

CZ-CSN

CSN 62 1523-1981 Vulcanized rubber. Accelerated heat oxygen ageing test
CSN 62 1522-1981 Vulcanized rubber. Accelerated heat air ageing test
CSN 65 6322-1956 Accelerated rust test

Korean Agency for Technology and Standards (KATS)

KS M 6788-2014 Accelerated aging test methods for vulcanized rubber
KS M 6788-1994 Accelerated aging test methods for vulcanized rubber
KS M ISO 188:2014 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
KS M ISO 188:2009 Rubber, vulcanized or thermoplastic-Accelerated ageing and heat resistance tests
KS M ISO 188-2014(2019) Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
KS M 0205-2010 Testing methods of colour after treatment with sulfuric acid
KS M ISO 3987:2012 Petroleum products－Determination of sulfated ash in lubricating oils and additives
KS M ISO 3987:2008 Petroleum products--Lubricating oils and additives--Determination of sulfated ash
KS C 0238-2001 Basic environmental testing procedures Part 2 : Tests-Test Ga and guidance : Acceleration, steady state
KS M 0070-1997 Testing methods for co1our of chemical products and colour after treatment with sulfuric acid

RO-ASRO

STAS 5152-1982 CURED ELASTOMERS Accelerated ageing testing

SCC

BS 903-A19:1956 Methods of testing vulcanized rubber. Accelerated ageing test
UNE 53548:1996 RUBBER VULCANIZED. ACCELERATED AGEING OR HEAT RESISTANCE TESTS.
AATCC 26-2020 Ageing of Sulfur-Dyed Textiles: Accelerated
AATCC 26-2004 Ageing of Sulfur-Dyed Textiles: Accelerated
AATCC 26-2009 Ageing of Sulfur-Dyed Textiles: Accelerated
DANSK DS/EN IEC 62506:2023 Methods for product accelerated testing
BS 903-A19:1975 Methods of testing vulcanized rubber.-Heat resistance and accelerated air ageing tests
10/30238858 DC BS EN 62506. Methods for product accelerated testing
BS ISO 188:1998 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
BS ISO 188:2007 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
06/30130359 DC ISO 188. Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
CEI EN 62506:2014 Methods for product accelerated testing
DANSK DS/EN 62506:2013 Methods for product accelerated testing
AATCC 26-2013 Ageing of Sulfur-Dyed Textiles: Accelerated (Editorial Revision and Reaffirmed - 2013)
UNE 34230:1983 LIQUID FRUIT AND VEGETABLE PRODUCTS. DETERMINATION OF THE CONTENT FO SULPHUR DIOXIDE (RAPIDE METHOD).
AENOR UNE 48059:1982 Accelerated aging test (closed arcs).
UNE 48059:1982 ACCELERATED WEATHERING TEST (ENCLOSED ARC)

Japanese Industrial Standards Committee (JISC)

JIS K 6257:1993 Accelerated aging test methods for vulcanized rubber

International Organization for Standardization (ISO)

ISO 188:2023 Rubber, vulcanized or thermoplastic — Accelerated ageing and heat resistance tests
ISO 188:1976 Rubber, vulcanized — Accelerated ageing or heat-resistance tests
ISO 188:1982 Rubber, vulcanized; Accelerated ageing or heat-resistance tests
ISO 188:1998 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat-resistance tests
ISO 188:2007 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
ISO/TS 19022:2016 Plastics - Method of controlled acceleration of laboratory weathering by increased irradiance
ISO 188:1998/Cor 1:2003 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests; Technical Corrigendum 1

BE-NBN

NBN T 31-005-1976 Vulcanized rubers- Accelerated ageing or heat restance tests
NBN T 31-043-1988 Rubber, vulcanized - Prearation of samples and test piees for chemical tests
NBN T 52-120-1955 Petroleum products - Sulfated ash from lubricating oils and additives
NBN T 31-037-1988 Rubber, vulcanized - Preparation of samples and test pieces for physical tests

SE-SIS

SIS SS-ISO 188:1990 Rubber, vulcanized — Accelerated ageing or heat-resistance tests

TR-TSE

TS 1969-1975 VULCAN1ZED RUBBERS ACCELERATED AGEING OR HEAT RESISTANCE TESTS

Danish Standards Foundation

DS/ISO 188:1989 Rubber, vulcanized. Accelerated ageing or heat-resistance tests
DS/EN 62506:2013 Methods for product accelerated testing

CENELEC - European Committee for Electrotechnical Standardization

EN 62506:2013 Methods for product accelerated testing

Association Francaise de Normalisation

NF C20-325*NF EN 62506:2013 Methods for product accelerated testing
NF T23-001:1953 Chemical products. Sulphuric acid.
NF EN IEC 62506:2023 Accelerated Product Testing Methods
NF EN 62506:2013 Accelerated Product Testing Methods
NF T60-143:1999 Petroleum products. Lubricating oils and additives. Determination of sulfated ash.
NF T46-006:1986 Vulcanized or thermoplastic rubber. Determination of accelerated ageing stability. Air pressure test.
NF T46-005:1985 Vulcanized or thermoplastic rubber. Accelerated ageing resistance determination. Oxygen pressure test.
NF EN 14112:2020 Products derived from fatty substances - Fatty acid methyl esters (FAME) - Determination of oxidation stability (accelerated oxidation test)
NF ISO 188:2023 Vulcanized or thermoplastic rubber - Accelerated aging and heat resistance tests
NF T45-030:1996 Rubber compounding ingredients. Accelerators, mercaptobenzothiazole (mbt) and mercaptobenzothiazyl disulfide (mbts) type. Test methods.
XP P18-458:2022 Test on hardened concrete - Accelerated carbonation test
NF T60-143*NF ISO 3987:2016 Petroleum products - Determination of sulfated ash in lubricating oils and additives

International Electrotechnical Commission (IEC)

IEC 62506:2013 Methods for product accelerated testing
IEC 62506:2023 CMV Methods for product accelerated testing

British Standards Institution (BSI)

BS 903-A19:1986(1999) Methods of testing vulcanized rubber — Part A19 : Heat resistance and accelerated ageing tests — [ ISO title : Rubber, vulcanized — Accelerated ageing or heat - resistance tests ]
BS ISO 188:2011 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests
IEC 62506:2023 Methods for product accelerated testing
BS EN IEC 62506:2023 Methods for product accelerated testing
BS EN 62506:2013 Methods for product accelerated testing
PD ISO/TS 19022:2016 Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
BS PD ISO/TS 19022:2016 Plastics. Method of controlled acceleration of laboratory weathering by increased irradiance
BS ISO 188:2023 Rubber, vulcanized or thermoplastic. Accelerated ageing and heat resistance tests

IN-BIS

IS 3400 Pt.4-1978 Test Methods for Vulcanized Rubber Part IV Accelerated Aging

ZA-SANS

SANS 54:2003 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
SANS 54:2009 Rubber, vulcanized or thermoplastic - Accelerated ageing and heat resistance tests
SANS 5869:1976 Accelerated aging of vulcanized rubbers (Air-oven method)
SANS 5869:2008 Accelerated aging of vulcanized rubbers (Air-oven method)
CKS 461-1976 Vulcanized rubber products

GSO

GSO ISO 188:2015 Rubber, vulcanized or thermoplastic -- Accelerated ageing and heat resistance tests
OS GSO IEC 62506:2017 Methods for product accelerated testing
GSO IEC 62506:2017 Methods for product accelerated testing
GSO ISO/TS 19022:2021 Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance
BH GSO ISO/TS 19022:2022 Plastics — Method of controlled acceleration of laboratory weathering by increased irradiance

Indonesia Standards

SNI ISO 188:2012 Rubber, vulcanized or thermoplastic – Accelerated ageing and heat resistance tests
SNI ASTM D6521:2012 Practice for accelerated aging of binder using a pressurized aging vessel (PAV)

VN-TCVN

TCVN 2229-2007 Rubber,vulcanized or thermoplastic.Accelerated ageing and heat resistance test
TCVN 3699-1990 Aquatic products.Qualitative test for hydrogen sulfide and ammonia

RU-GOST R

GOST ISO 188-2013 Vulcanized rubberand thermoplastics. Accelerated ageing and heat resistance tests
GOST 1437-1975 Dark petroleum products. Accelerated method for determination of sulphur
GOST R 57444-2017 Identification of chemical production. Guidance for laboratory testing

IT-UNI

UNI 5409-1964 Elastic materials: vulcanized material test, artificial accelerated aging test under pressure oxidation atmosphere
UNI 5408-1964 Elastomeric materials: vulcanized material tests, artificially accelerated aging tests in furnaces

American Society for Testing and Materials (ASTM)

ASTM D4818-89(2005) Standard Classification for Rubber Compounding Materials-Vulcanization Accelerators
ASTM UOP547-13 Laboratory Hydrogen Sulfide and Mercaptan Extraction
ASTM D8137-18 Practice for Accelerated Aging of Leather
ASTM UOP547-97 Laboratory Hydrogen Sulfide and Mercaptan Extraction
ASTM D3070-18 Standard Practice for Rapid Pressure Determination of Pressurized Products
ASTM D6675-01(2011) Standard Practice for Salt-Accelerated Outdoor Cosmetic Corrosion Testing of Organic Coatings on Automotive Sheet Steel
ASTM D4818-89(2012) Standard Classification for Rubber Compounding Materialsmdash;Vulcanization Accelerators
ASTM D8137-18(2023) Practice for Accelerated Aging of Leather
ASTM D4045-15 Standard Test Method for Sulfur in Petroleum Products by Hydrogenolysis and Rateometric Colorimetry
ASTM F581-78(1991)e1 Practice for Accelerated Aging of Photoresist
ASTM D5427-03 Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
ASTM D5427-03(2007) Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
ASTM D5427-02 Standard Practice for Accelerated Aging of Inflatable Restraint Fabrics
ASTM C1519-10 Standard Test Method for Evaluating Durability of Building Construction Sealants by Laboratory Accelerated Weathering Procedures
ASTM D7548-16a Standard Test Method for Determination of Accelerated Iron Corrosion in Petroleum Products
ASTM C1768/C1768M-12(2017) Standard Practice for Accelerated Curing of Concrete Cylinders

Universal Oil Products Company (UOP)

UOP 547-2013 LABORATORY HYDROGEN SULFIDE AND MERCAPTAN EXTRACTION

ES-UNE

UNE-EN 62506:2013 Methods for product accelerated testing (Endorsed by AENOR in January of 2014.)

German Institute for Standardization

DIN EN 62506:2014-03 Methods for product accelerated testing (IEC 62506:2013); German version EN 62506:2013
DIN 7738:1959-09 Laminated Products; Vulcanized Fibre, Acceptance, Test Methods
DIN 53508:2000 Testing of rubber - Accelerated ageing

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 62506:2023 Methods for product accelerated testing

YU-JUS

JUS G.S2.126-1986 Rubber, vulcanized. Accelerated ageing or heatresistance tests

Standard Association of Australia （SAA）

AS 1683.26:2001 Methods of test for elastomers - Rubber, vulcanizedor thermoplastic - Accelerated ageing and heat resistance tests

AENOR

UNE-ISO 188:2009 Rubber, vulcanised or thermoplastic. Accelerated ageing and heat resistance tests

FI-SFS

SFS 5292-1987 textile. accelerated thermal aging

BR-ABNT

ABNT P-MB-465-1969 Accelerated Aging Test, Vulcanized Elastomer in Oxygen

PK-PSQCA

PS 348-1963 Accelerated Ageing Tests on Rubbers.

DIN

DIN 53508:2024 Testing of rubber - Accelerated ageing

TH-TISI

TIS 1796-1999 Petroleum products.lubricating oils and additives.determination of sulfated ash

GOST

GOST 34815-2021 Foods. Accelerated oxidation test using the oxidation test reactor

GM Daewoo

GMKOREA EDS-T-7421-2012 Accelerated Aging Test for Elastomers ????? ???? ???? Version 5; English/Korean; This standard may be applied only for current projects. It is Superceded for all future projects and replaced by ISO188 [Replaced: GMKOREA EDS-T-7421]

Others: