Floor patching manufacturing standards

Floor patching manufacturing standards, Total:270 items.

The international standard classification for "Floor patching manufacturing standards" includes: Surface treatment and coating in general , Construction equipment , Power transmission and distribution lines , Education , Ground service and maintenance equipment , Road construction materials , Services in general .

The Chinese standard classification for "Floor patching manufacturing standards" includes: Basic standards and general methods , Architectural engineering construction machinery , Air transport and ground equipment in general , Others , Sports facilities and apparatus , Aircraft maintenance and management , Highway engineering , Ground control and guidance system , Supply and Use Relation .

Military Standard of the People's Republic of China-General Armament Department

GJB 2225.5-1994 General technical requirements for ground electronic countermeasures equipment, design and manufacturing requirements
GJB 3637-1999 Ground suppression artillery reliability and maintainability requirements and verification
GJB 74.5-1985 Design and manufacturing requirements for general technical conditions for military ground radars
GJB 805.3-1990 General specification design and manufacturing requirements for surface-to-surface strategic missile ground equipment
GJB 8002-2013 Requirements for drafting repair manual of military ground radars
GJB 806.5-1990 General specification design and manufacturing requirements for surface-to-surface strategic missiles
GJB 805.5-1990 Maintenance requirements of general specifications for ground equipment for surface-to-surface strategic missiles

Professional Standard-Ships

CB/T 8527-2017 Technical specification for enclosure design of shipbuilding and shipbuilding bases
CB/T 3293-2013 Requirements for the plate surface quality evaluation and the repairs of surface defects during shipbuilding
CB/T 3293-1997 Standard for the plate surface quality evalution and the repairs of surfaces defects during shipbuilding

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 35977-2018 Remanufacturing—Technical specifications for surface repair of mechanical products

Group Standards of the People's Republic of China

T/CASME 724-2023 Specifications for the remanufacturing and maintenance of sanitation vehicles
T/QGCML 1229-2023 CNC trimming machine for metal cups and pots manufacturing
T/HTSJ 005-2021 Quality control specification for sports areas with artificial turf surfaces
T/CACE 019-2020 Regulation on Import of Used Mechanical and Electrical Products in Demonstration Base of Maintenance and Remanufacturing Industry
T/HFJX 2043-2020 Motor Grader Remanufacturing
T/HFJX 2019-2019 Hydraulic excavator for marshland and shallow-water areas remanufacturing
T/SBMIA 015-2020 Repair Materials for Cement Based Pavement
T/CECS G:T35-2020 Supplementary Standard for the Cost of Highway Engineering Construction Projects in High Altitude and Cold Area
T/GSMA 3-2020 Quality control specification for sports areas with artificial turf surfaces
T/AHEPI 0006-2023 Cost guidelines for construction land soil remediation industry
T/CECS G-T35-2020 Supplementary Standards for Cost of Highway Construction Projects in Alpine and High Altitude Areas
T/TMAC 072-2023 Technical requirements for bridge deck pavement repair and reconstruction construction
T/CCMA 0180-2024 Recycling maintenance vehicle with hot air and microwave heating for asphalt pavement
T/CACE 017-2020 Maintenance and Remanufacturing─ Enterprise Technical Specification

工业和信息化部/国家能源局

JB/T 12735-2016 Remanufactured internal combustion engines. Part and element surface restoration process specifications

Professional Standard - Aviation

HB 3461-1992 General Technical Requirements for Manufacturing of Aircraft Ground Support Equipment
HB/Z 410-2013 Repair Technology of Resin Matrix Composite Parts

工业和信息化部

JB/T 13746-2019 Technical specification for repair welding of copper art casting casting defects
JB/T 13792-2020 Earth-moving machinery remanufacture -Technical specifications for surface repair of parts

Professional Standard - Electricity

DL/T 1069-2016 Repair guideline of conductor and earth wire for overhead transmission line
DL/T 1069-2007 Repair guideline of conductor and earth wire for overhead transmission line

Hebei Provincial Standard of the People's Republic of China

DB13/T 2275-2015 Technical specification for building terraced cultivated land in gneiss mountainous land

Anhui Provincial Standard of the People's Republic of China

DB34/T 1908-2013 Specification for repairing surface defects of wear-resistant steel castings

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 43566-2023 Football fields with artificial turf for primary and middle schools
GB 18580-2017(英文版) Indoor decorating and refurbishing materials—Limit of formaldehyde emission of wood based panels and finishing products

Professional Standard - Civil Aviation

MH/T 3012.1-2008 Maintenance for civil aircraft-ground maintenance facilities-part 1:maintenance hangar
MH/T 3011.5-2006 Maintenance for civil aircraft -- Ground safety -- Part 5:Engine ground run up test for civil aircraft
MH/T 3011.21-2006 Maintenance for civil aircraft -- Ground safety -- Part 21:Ground heating of civil aircraft
MH 3145.42-1998 Maintenance standards for civil aircraft Unit 2: Ground safety Part 42: Maintenance usage and management of ground fire protection equipment
MH/T 3011.5-2010 Maintenance for civil aircraft-ground safety-part 5:engine ground run up test for civil aircraft
MH/T 3011.12-2006 Maintenance for civil aircraft -- Ground safety -- Part 12:Maintenance, usage and management of ground fire protection equipment
MH/T 3012.17-2010 Maintenance for civil aircraft-ground maintenance facilities-part 17:aircraft maintenance dock

未注明发布机构

DIN EN 16362 E:2011-12 Railway applications - Ground based services - Water restocking equipment
GJB 7638-2012 Requirements for the preparation of use and maintenance manuals for military helicopter ground support equipment
DIN EN 13036-1:2001 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique
DIN EN 12229 E:2013-06 Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces

Professional Standard - Traffic

JT/T 530-2004 Cold mixing and repairing materials for asphalt pavement pits - SBS asphalt liquid

Professional Standard - Electron

SJ 20694-1998 Maintainability design guide for ground radars

Professional Standard - Aerospace

QJ 1447A-1995 Development Procedure of Ground Guidance Station
QJ 1447-1988 雷达
QJ 1835.10-1990 Amendments and Supplementary Provisions to the Management Measures for the Establishment and Revision of Aerospace Industry Standards

Shanxi Provincial Standard of the People's Republic of China

DB14/T 2652-2023 Maintenance Guide for Artificial Grass Surfaces in Sports Fields
DB14/T 2653-2023 Quality requirements for the surface layer of artificial turf for sports venues

Professional Standard - Agriculture

1322药典一部-2015 Prescription preparation and single preparation Qihua Buyi Dihuang Wan
1367药典一部-2020 Prescription preparation and single preparation Qihua Buyi Dihuang Wan

Sichuan Provincial Standard of the People's Republic of China

DB51/T 1847-2014 Technical regulations for ground fixed-point monitoring of grassland ecological protection subsidy and reward mechanism for ecological benefits

Professional Standard - Petroleum

SY/T 5066.2-2012 Surface Control Device for Formation Tester
SY 5066.2-2012 Ground Control Devices for Formation Testing

国家能源局

SY/T 6160-2019 Inspection, repair and remanufacture of blowout preventer

Professional Standard - Goods and Materials

WB/T 541017-2002 Inspect standard for wood flooring surface during guarantee
WB/T 1017-2002 Inspect standard for wood flooring surface during guarantee
WB/T 1017-2006 Inspection standard for wooden flooring during guarantee period

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 37432-2019 Full face tunnel boring machine remanufacturing

GB-REG

REG KSC-E-165 REV E CHG 1-2013 ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR
REG NASA-STD-5005 REV D-2013 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT

(U.S.) Kennedy Space Center

KSC-E-165 REV E-2009 ELECTRICAL GROUND SUPPORT EQUIPMENT FABRICATION, SPECIFICATION FOR

U.S. Military Regulations and Norms

ARMY UFGS-32 01 29.61-2008 PARTIAL DEPTH PATCHING OF RIGID PAVING
ARMY UFGS-32 01 28-2008 PARTIAL-DEPTH PATCHING OF RIGID PAVEMENTS
ARMY MIL-W-47091 A NOTICE 1-1996 WELDING, ARC AND GAS; FOR FABRICATING GROUND EQUIPMENT FOR ROCKETS AND GUIDED MISSILES
ARMY MIL-W-47091 A-1992 WELDING, ARC AND GAS; FOR FABRICATING GROUND EQUIPMENT FOR ROCKETS AND GUIDED MISSILES
ARMY A-A-52517 VALID NOTICE 1-2004 PATCH, REPAIR, FOR INNER TUBES AND TUBELESS TIRE LINERS (METRIC)
ARMY A-A-52517-1995 PATCH, REPAIR, FOR INNER TUBES AND TUBELESS TIRE LINERS (METRIC)
ARMY A-A-52518 VALID NOTICE 1-2004 TIRE, PNEUMATIC: RETREAD AND REPAIR MATERIALS (METRIC)
ARMY A-A-52518-1995 TIRE, PNEUMATIC: RETREAD AND REPAIR MATERIALS (METRIC)
ARMY UFGS-06 61 16-2010 SOLID POLYMER (SOLID SURFACING) FABRICATIONS
ARMY UFGS-06 61 16-2009 SOLID POLYMER (SOLID SURFACING) FABRICATIONS

US-FCR

FCR UFGS-12 36 00.00 20-2011 MANUFACTURED VANITIES
FCR FED MP-3 PT I CHANGE 8-1964 CONSTRUCTION, PRESERVATION AND ALTERATIONS OF STRUCTURES, GROUNDS, AND UTILITIES
FCR FED MP-3 PT I-1956 CONSTRUCTION, PRESERVATION AND ALTERATIONS OF STRUCTURES, GROUNDS, AND UTILITIES
FCR FED MP-3 PT I CHANGE 5-1960 CONSTRUCTION, PRESERVATION AND ALTERATIONS OF STRUCTURES, GROUNDS, AND UTILITIES
FCR FED MP-3 PT I CHANGE 18-22-1978 CONSTRUCTION, PRESERVATION AND ALTERATIONS OF STRUCTURES, GROUNDS, AND UTILITIES
FCR FED MP-3 PT I CHANGE 12-15-1971 CONSTRUCTION, PRESERVATION AND ALTERATIONS OF STRUCTURES, GROUNDS, AND UTILITIES
FCR FED MP-3 PT I CHANGE 10-1966 CONSTRUCTION, PRESERVATION AND ALTERATIONS OF STRUCTURES, GROUNDS, AND UTILITIES
FCR FED MP-3 PT I CHANGE 2-1957 CONSTRUCTION, PRESERVATION AND ALTERATIONS OF STRUCTURES, GROUNDS, AND UTILITIES
FCR 21 CFR PART 111-2015 CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS
FCR 21 CFR PART 111-2013 CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS
FCR 21 CFR PART 111-2014 CURRENT GOOD MANUFACTURING PRACTICE IN MANUFACTURING, PACKAGING, LABELING, OR HOLDING OPERATIONS FOR DIETARY SUPPLEMENTS
FCR COE CE 1103 AMENDMENT 1-1966 PHOTOGRAMMETRIC MAPPING AND COMPLEMENTARY FIELD SURVEYS
FCR COE CE 1103-1965 PHOTOGRAMMETRIC MAPPING AND COMPLEMENTARY FIELD SURVEYS
FCR COE CEGS 06650-2000 SOLID POLYMER (SOLID SURFACING) FABRICATIONS

American National Standards Institute （ANSI)

ANSI/NFPA 1931-2010 Standard for Manufacturer's Design of Fire Department Ground Ladders
ANSI/ASTM F1953:2010 Guide for Construction and Maintenance of Grass Tennis Courts

SAE - SAE International

SAE AIR1599A-1991 Ground Equipment Rebuild Program
SAE AIR1589B-2016 Aircraft Damage Caused by Ground Support Equipment

Society of Automotive Engineers (SAE)

SAE AIR1599A-2020 Ground Equipment Rebuild Program
SAE AIR1589C-2022 Aircraft Damage Caused by Ground Support Equipment
SAE AIR1589-1980 Aircraft Damage Caused by Ground Support Equipment
SAE AIR1589-1992 AIRCRAFT DAMAGE CAUSED BY GROUND SUPPORT EQUIPMENT
SAE AIR6813-2022 Landing Gear Manufacturing, Maintenance, Repair, and Overhaul Critical Processes
SAE AIR1589A-2009 Aircraft Damage Caused by Ground Support Equipment
SAE ARP4991A-2007 Core Restoration of Thermosetting Composite Components

AIA/NAS - Aerospace Industries Association of America Inc.

NAS1043-2011 SHACKLE@ CHAIN@ FORGED CARBON STEEL@ SCREW PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 2)
NAS1046-2012 CLIP@ WIRE ROPE@ FORGED CARBON STEEL@ FOR GROUND SUPPORT EQUIPMENT (Rev 1)
NAS1042-2015 SHACKLE@ ANCHOR@ FORGED CARBON STEEL@ ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 4)
NAS1042-2011 SHACKLE@ ANCHOR@ FORGED CARBON STEEL@ ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 3)
NAS1044-1978 Shackle-Chain@ Forged Carbon Steel@ Round Pin (for Ground Support Equipment) (Rev 2)
NAS1042-1978 Shackle-Anchor@ Forged Carbon Steel@ Round Pin (for Ground Support Equipment) (Rev 2)
NAS1043-2015 SHACKLE@ CHAIN@ FORGED CARBON STEEL@ SCREW PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 3)
NAS1044-2010 SHACKLE@ CHAIN@ FORGED CARBON STEEL@ ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 3)
NAS1050-2011 GRAB HOOK@ FORGED ALLOY STEEL@ DIRECT EYE@ FOR GROUND SUPPORT EQUIPMENT (Rev 3)
NAS1051-1994 Safety Hook@ Forged Carbon Steel@ Snap@ Direct Eye (for Ground Support Equipment) (Rev 2)
NAS1043-1960 Shackle-Chain@ Forged Carbon Steel@ Screw Pin (for Ground Support Equipment) (Rev 1)
NAS1044-2014 SHACKLE@ CHAIN@ FORGED CARBON STEEL@ ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 4)
NAS1051-2014 SAFETY HOOK@ FORGED CARBON STEEL@ SNAP@ DIRECT EYE (FOR GROUND SUPPORT EQUIPMENT) (Rev 4)
NAS1051-2010 SAFETY HOOK@ FORGED CARBON STEEL@ SNAP@ DIRECT EYE (FOR GROUND SUPPORT EQUIPMENT) (Rev 3)
NAS1047-2016 TURNBUCKLE ASSEMBLY@ FORGED CARBON STEEL@ JAW AND JAW@ FOR GROUND SUPPORT EQPT (Rev 6)
NAS1047-2011 TURNBUCKLE ASSEMBLY@ FORGED CARBON STEEL@ JAW AND JAW@ FOR GROUND SUPPORT EQPT (Rev 5)
NAS823-2011 CAST SURFACE COMPARISON STANDARD (Rev 3)
NAS823-1991 Cast Surface Comparison Standard (Rev 2)
NAS1553-2011 KNOB@ HAND@ GROUND SUPPORT EQUIPMENT (Rev 5)
NAS972-1977 Glossary of Manufacturing Equipment Terms (Rev 2)
NAS972-2013 GLOSSARY OF MANUFACTURING EQUIPMENT TERMS (Rev 3)
NAS1553-2016 KNOB@ HAND@ GROUND SUPPORT EQUIPMENT (Rev 6)
NAS1553-1974 Knob@ Hand@ Ground Support Equipment (Rev 4)
NAS1046-1956 Clip-Wire Rope@ Forged Carbon Steel (for Ground Support Equipment)

Aerospace Industries Association/ANSI Aerospace Standards

AIA/NAS NAS1050-2011 GRAB HOOK, FORGED ALLOY STEEL, DIRECT EYE, FOR GROUND SUPPORT EQUIPMENT (Rev 3)
AIA/NAS NAS1042-2015 SHACKLE, ANCHOR, FORGED CARBON STEEL, ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 4)
AIA/NAS NAS1044-2014 SHACKLE, CHAIN, FORGED CARBON STEEL, ROUND PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 4)
AIA/NAS NAS1043-2015 SHACKLE, CHAIN, FORGED CARBON STEEL, SCREW PIN (FOR GROUND SUPPORT EQUIPMENT) (Rev 3)
AIA/NAS NAS1051-2014 SAFETY HOOK, FORGED CARBON STEEL, SNAP, DIRECT EYE (FOR GROUND SUPPORT EQUIPMENT) (Rev 4)
AIA/NAS NAS1047-2011 TURNBUCKLE ASSEMBLY, FORGED CARBON STEEL, JAW AND JAW, FOR GROUND SUPPORT EQPT (Rev 5)
AIA/NAS NAS1047-2016 TURNBUCKLE ASSEMBLY, FORGED CARBON STEEL, JAW AND JAW, FOR GROUND SUPPORT EQPT (Rev 6)
AIA/NAS NAS1553-2016 KNOB, HAND, GROUND SUPPORT EQUIPMENT (Rev 6)
AIA/NAS NAS1553-2011 KNOB, HAND, GROUND SUPPORT EQUIPMENT (Rev 5)

IX-ICAO

ICAO ANNEX 5 SPANISH SUPP-2001 Unidades de medida que se emplear醤 en las operaciones a閞eas y terrestres Cuarta edici髇; Incorporates Amendment 1 To Supplement: 10/28/2002 and Amendment 2 To Supplement: 06/22/2004

Aerospace Industries Association

AIA NAS 1050-1994 Grab Hook, Forged Alloy Steel, Direct Eye (for Ground Support Equipment) (Rev. 2)
AIA NAS 1044-1978 Shackle-Chain, Forged Carbon Steel, Round Pin (for Ground Support Equipment) (Rev. 2) R(1994)
AIA NAS 1051-1994 Safety Hook, Forged Carbon Steel, Snap, Direct Eye (for Ground Support Equipment) (Rev. 2)
AIA NAS 1042-1978 Shackle-Anchor, Forged Carbon Steel, Round Pin (for Ground Support Equipment) (Rev. 2) R(1994)
AIA NAS 1043-1960 Shackle-Chain, Forged Carbon Steel, Screw Pin (for Ground Support Equipment) (Rev. 1) R(1994)
AIA NAS 823-1991 Cast Surface Comparison Standard (Rev. 2)
AIA NAS 972-1977 Glossary of Manufacturing Equipment Terms (Rev. 2)

PT-IPQ

NP 4380-3-1999 Tyres Retreading tyres for passengers cars and commercial vehicles. Part 3: Materials for retreading

SCC

CEI EN IEC 62941:2020 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing
DANSK DS/EN IEC 62941:2020 Terrestrial photovoltaic (PV) modules – Quality system for PV module manufacturing
DANSK DS/EN 16362:2013 Railway applications - Ground based services - Water restocking equipment
NS-EN 16362:2013 Railway applications — Ground based services — Water restocking equipment
AENOR UNE-EN 16362:2014 Railway applications - Ground based services - Water restocking equipment
DANSK DS/EN 12229:2014 Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces
NS-EN 12229:2014 Surfaces for sports areas — Procedure for the preparation of synthetic turf and needle-punch test pieces
UNE-EN 12229:2008 Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces
DANSK DS/EN 14354:2017 Wood-based panels – Wood veneer floor coverings
NS-EN 12229:2007 Surfaces for sports areas — Procedure for the preparation of synthetic turf and needle-punch test pieces
BS EN 12229:2000 Surfaces for sports areas. Procedure for the preparation of synthetic turf and textile pieces
NS-EN 14354:2004 Wood-based panels — Wood veneer floor covering
AENOR UNE-EN 14354:2017 Wood-based panels - Wood veneer floor coverings
UNE-EN 14354:2007 Wood-based panels - Wood veneer floor covering
NS-EN 14354:2017 Wood-based panels — Wood veneer floor coverings
DIN EN 16362 E:2011 Draft Document - Railway applications - Ground based services - Water restocking equipment; German version prEN 16362:2011
UNE-EN 12229:2000 SURFACES FOR SPORTS AREAS. PROCEDURE FOR THE PREPARATION OF SYNTHETIC TURF AND TEXTILE TEST PIECES.
NS-EN 644:1999 Paper — Untrimmed sizes — Primary range and supplementary range designation and tolerances, expression of direction of manufacture
11/30241471 DC BS EN 16362. Railway applications. Ground based services. Water restocking equipment
06/30148653 DC EN 12229. Surfaces for sports areas. Procedure for the preparation of synthetic turf and needle-punch test pieces
VDI 3456-2009 Emission reduction — vehicle repair and painting
AWWA 51517 New and Improved Draft Groundwater Recharge Criteria in California
BS 7044-2-2.5:1990 Artificial sports surfaces. Methods of test-Miscellaneous
DIN EN IEC 62941 E:2019 Draft Document - Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing (IEC 82/1531/CDV:2019); German and English version prEN IEC 62941:2019
DIN 4084 Supplement 1:2012 Ground - Calculation of the overall stability - Supplement 1: Examples of calculation
BS PD ISO/TS 16774-4:2023 Test methods for repair materials for water-leakage cracks in underground concrete structures-Test method for adhesion on wet concrete surface
BS PD ISO/IEC TR 63306-2:2021 Smart manufacturing standards map (SM2)-Catalogue

British Standards Institution (BSI)

BS EN IEC 62941:2020 Terrestrial photovoltaic (PV) modules. Quality system for PV module manufacturing
18/30370021 DC BS EN 62941. Terrestrial photovoltaic (PV) modules. Quality system for PV module manufacturing
BS EN 14354:2017 Wood-based panels. Wood veneer floor coverings
23/30479761 DC BS EN IEC 62941 Terrestrial photovoltaic (PV) modules. Quality system for PV module manufacturing
BS 5834-2:2011 Surface boxes, guards and underground chambers for the purposes of utilities. Specification for surface boxes
BS ISO 14222:2022 Space environment (natural and artificial). Earth's atmosphere from ground level upward
BS ISO 4288:1997 Geometric Product Specification (GPS). Surface texture. Profile method: Rules and procedures for the assessment of surface texture
BS PD ISO/IEC TR 63306-1:2020 Smart manufacturing standards map (SM2). Framework

European Committee for Electrotechnical Standardization（CENELEC）

EN IEC 62941:2020 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing

ES-UNE

UNE-EN IEC 62941:2020 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing

International Electrotechnical Commission (IEC)

IEC 62941:2019 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing

American Society of Mechanical Engineers (ASME)

ASME P-6-2011 Manufacturer's Data Report Supplementary Sheet
ASME H-6-2013 Manufacturer's Data Report Supplementary Sheet
ASME K-3-2013 Manufacturer's Data Report Supplementary Sheet
ASME A-3-2013 Manufacturers' Data Report Supplementary Sheet
ASME RP-5-2011 Fabricator's Data Report Supplementary Sheet
ASME T-3A-2010 Class 1 Transport Tank Manufacturer's Data Report Supplementary Sheet
ASME T-3C-2010 Class 3 Transport Tank Manufacturer's Data Report Supplementary Sheet
ASME U-1B-2013 Manufacturers' Supplementary Data Report for Graphite Pressure Vessels

Association of German Mechanical Engineers

DVS 2502-1985 Repair welding of passenger cars; requirements on the operation; weldability of passenger-car building components; rules for the repair
DVS 2503-1980 Repair welding of passenger cars; joining processes in car body construction

European Committee for Standardization (CEN)

EN 16362:2013 Railway applications - Ground based services - Water restocking equipment
EN 13121-3:2008 GRP tanks and vessels for use above ground - Part 3: Design and workmanship Incorporates Amendment A1: 2010
EN 644:1993 Paper - Untrimmed Sizes - Primary Range and Supplementary Range Designation and Tolerances - Expression of Direction of Manufacture
EN 644:1999 Paper - Untrimmed Sizes - Primary Range and Supplementary Range Designation and Tolerances, Expression of Direction of Manufacture
EN 13036-1:2001 Road and Airfield Surface Characteristics - Test Methods - Part 1: Measurement of Pavement Surface Macrotexture Depth Using a Volumetric Patch Technique

AENOR

UNE-EN 16362:2014 Railway applications - Ground based services - Water restocking equipment
UNE-EN 14354:2017 Wood-based panels - Wood veneer floor coverings
UNE 40293:1975 MACHINE MADE TESTILE FLOOR COVERINGS. DETERMINATION OF MASS PER UNIT AREA.
UNE 27314:2014 Civil shipbuilding and ship repairing. Standardised components. Steel flat flanges to connect to butterfly valves

German Institute for Standardization

DIN EN 16362:2014-03 Railway applications - Ground based services - Water restocking equipment; German version EN 16362:2013
DIN EN 14354:2017-11 Wood-based panels - Wood veneer floor coverings; German version EN 14354:2017
DIN EN 12229:2014-07 Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces; German version EN 12229:2014
DIN EN ISO/ASTM 52920:2021-08 Additive manufacturing - Qualification principles - Requirements for industrial additive manufacturing sites (ISO/ASTM DIS 52920:2021); German and English version prEN ISO/ASTM 52920:2021 / Note: Date of issue 2021-07-23
DIN 4084 Bb.1:2012 Ground - Calculation of the overall stability - Supplement 1: Examples of calculation
DIN EN 61821 Bb.1:2004 Electrical installations for lighting and beaconing of aerodromes -Maintenance of aeronautical ground lighting constant current series; Supplement 1: Form

Association Francaise de Normalisation

NF EN IEC 62941:2020 Photovoltaic (PV) modules for terrestrial applications - Quality system for the manufacturing of photovoltaic modules
NF F00-362*NF EN 16362:2014 Railway applications - Ground based services - Water restocking equipment
NF P90-133*NF EN 12229:2014 Surfaces for sports areas - Procedure for the preparation of synthetic turf and needle-punch test pieces

International Federation of Trucks and Engines

NAVISTAR TMS 7009-1992 VOID - Rayon Fabric, Trim Carpet

Indonesia Standards

SNI 13-6010-1999 Preparation of seismotectonic maps

National Aeronautics and Space Administration (NASA)

NASA-STD-(I)-5005 REV C-2007 STANDARD FOR THE DESIGN AND FABRICATION OF GROUND SUPPORT EQUIPMENT (NASA Interim Standard)

Aeronautical Radio Inc.

ARINC 822-1-2008 AIRCRAFT / GROUND IP COMMUNICATION 2006; Includes Supplement 1
ARINC 618-5-2000 Air/Ground Character-Oriented Protocol Specification Includes Supplements 1 Through 5
ARINC 618-7-2013 AIR/GROUND CHARACTER-ORIENTED PROTOCOL SPECIFICATION 1992; Includes Supplements 1-7
ARINC 618-5 BOOK-2000 Air/Ground Character-Oriented Protocol Specification Includes Supplements 1 Through 5

IN-BIS

IS 2690 Pt.1-1993 Burnt clay flat terracing tiles. Specification. Part 1: Machine made (Second Revision)

American Society for Testing and Materials (ASTM)

ASTM D5745-95(2005) Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation
ASTM D5745-09 Standard Guide for Developing and Implementing Short-Term Measures or Early Actions for Site Remediation

Korean Agency for Technology and Standards (KATS)

KS F 4060-2006(2017) Cement bonded artificial stone panel for floor
KS E ISO 710-7:2003 Graphical symbols for use on detailed maps, plans and geological cross-sections－Part 7：Tectonic symbols
KS E ISO 710-7-2023 Graphical symbols for use on detailed maps, plans and geological cross-sections－Part 7：Tectonic symbols
KS E ISO 710-7-2003(2018) Graphical symbols for use on detailed maps, plans and geological cross-sections－Part 7：Tectonic symbols
KS B ISO 6263-2013 Hydraulic fluid power－Compensated flow－control valves－Mounting surfaces

Lithuanian Standards Office

LST EN 14354-2005/AC-2007 Wood-based panels - Wood veneer floor covering
LST EN 14354-2005 Wood-based panels - Wood veneer floor covering

PL-PKN

PN-EN 14354-2017-08 D Wood-based panels - Wood veneer floor coverings

North Atlantic Treaty Organization Standards Agency

STANAG 1310-2009 DESIGN CRITERIA FOR REPLENISHMENT ASPECTS OF NEW CONSTRUCTION NAVAL VESSELS

TR-TSE

TS 2911-1978 Aircraft - Identification Of Servicing, Maintenance, Ground Handling And Safety/Hazard Points

Danish Standards Foundation

DS/EN 14354:2005 Wood-based panels - Wood veneer floor covering
DS/EN 14354/AC:2007 Wood-based panels - Wood veneer floor covering

VDI - Verein Deutscher Ingenieure

VDI 3456-2018 Emission control - Refinishing and finishing of vehicles
VDI 3456-2017 Emission control - Refinishing and finishing of vehicles
VDI 3037-1973 Floor place requirement and choise of place for the maintenance shop

HU-MSZT

MSZ 5977-1965 Shoe manufacturing surface leather
MSZ 6216/1-1970 Manufacturing of underground drainage pipes by firing clay. Underground drainage pipe circle
MNOSZ 6033-1956 Formwork steel manufacturing. Double sided lock

National Sanitation Foundation (NSF)

NSF 52E-2007 Supplemental Flooring Editorial Revision; Printed 05/03/07

(U.S.) Ford Automotive Standards

FORD GMS-003-2001 Global Manufacturing Standards Revision Notice

VDE - VDE Verlag GmbH@ Berlin@ Germany

VDE 0126-310-2019 Terrestrial photovoltaic (PV) modules - Quality system for PV module manufacturing (IEC 82/1531/CDV:2019); German and English version prEN IEC 62941:2019

WRC - Welding Research Council

BULLETIN 525- FABRICATION AND REPAIR OF LOW ALLOY STEEL PRESSURE EQUIPMENT

NATO - North Atlantic Treaty Organization

STANAG 1310-2010 Design Criteria for Replenishment Aspects of New Construction Naval Vessels (ED 6)
STANAG 1310-1999 Design Criteria for Replenishment Aspects of New Construction Naval Vessels (ED 3)
STANAG 1310-2007 Design Criteria for Replenishment Aspects of New Construction Naval Vessels (ED 4)
STANAG 2156-1988 Surface Transport Request and Surface Transport Reply (ED 4 AMD 3 Amendment 3 2/5/93)
ANEP-89-2017 DESIGN CRITERIA FOR REPLENISHMENT ASPECTS OF NEW CONSTRUCTION NAVAL VESSELS (ED B@ Ver 1)
ANEP-89-2015 DESIGN CRITERIA FOR REPLENISHMENT ASPECTS OF NEW CONSTRUCTION NAVAL VESSELS (ED A@ Ver 1)
STANAG 1310-1996 Design Criteria for Replenishment Aspects of New Construction Naval Vessels (ED 2 AMD 0)

AGMA - American Gear Manufacturers Association

11FTM01-2011 A New Way of Face Gear Manufacturing

Standard Association of Australia （SAA）

AS/NZS 62941:2023 Terrestrial photovoltaic (PV) modules — Quality system for PV module manufacturing (IEC 62941:2019, (ED. 1.0) MOD)

AT-ON

ONORM C 2125 Teil.1-1982 Above ground cylindrical flatbottom tanks of metallic materials; basic rules, constructions, tests

ZA-SANS

SANS 10310:2005 The manufacture and reconditioning of replacement brake lining assemblies

SSPC - The Society for Protective Coatings

AB 3-1997 Newly Manufactured or Re-Manufactured Steel Abrasives (Editorial Changes September 1@ 2000)

CU-NC

NC 57-95-1986 Geodesy and Cartography National Cadaster. Updating

Japanese Industrial Standards Committee (JISC)

JIS F 3024:1996 Shipbuilding -- Deck stands for controlling valves
JIS G 2402 AMD 1:2005 Aluminium dross for iron and steel making (Amendment 1)

FI-SFS

SFS 8160-1986 In case of interpretation disputes the Finnish text applies

BELST

STB 149-2004 Personnel services. Locks repaired. Manufacturing and repaired. General specifications

International Organization for Standardization (ISO)

ISO 710-7:1984 Graphical symbols for use on detailed maps, plans and geological cross-sections; Part 7 : Tectonic symbols
ISO/DTS 16774-6:2024 Test methods for repair materials for water-leakage cracks in underground concrete structures
ISO/DTS 16774-1:2024 Test methods for repair materials for water-leakage cracks in underground concrete structures
ISO/DTS 16774-5:2024 Test methods for repair materials for water-leakage cracks in underground concrete structures

CH-SNV

SEV ASE 9101-1960 Vortex line. Engage. Manufacturing and Monitoring Instructions. Drawing supplement

CEN - European Committee for Standardization

EN 13036-1:2010 Road and airfield surface characteristics - Test methods - Part 1: Measurement of pavement surface macrotexture depth using a volumetric patch technique

A4A - Airlines for America

SPEC 100-1996 Manufacturers Technical Data (Through Revision 34)

KR-KS

KS E ISO 710-7-2003(2023) Graphical symbols for use on detailed maps, plans and geological cross-sections－Part 7：Tectonic symbols

GSO

GSO EN 12387:2011 Footwear, leather and imitation leather goods manufacturing machines - Modular shoe repair equipment - Safety requirements
OS GSO ISO 710-7:2013 Graphical symbols for use on detailed maps, plans and geological cross-sections -- Part 7: Tectonic symbols

AASHTO - American Association of State Highway and Transportation Officials

GDPS SUPP-1998 Supplement to the AASHTO Guide for Design of Pavement Structures Volume 2 (Revision 4)

Others: