GA 1051-2013 in English

1 Scope

This standard specifies such contents as classification, grading, designation as well as technical requirements, test methods and inspection rules for dedicated safes for guns and ammunition.

This standard is applicable to dedicated safes for legally equipped and configured guns or/and ammunition and is the technical basis for design, manufacture, inspection, acceptance, certification and judgment of dedicated safes for guns and ammunition.

2 Normative References

The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.

GB 10409 Burglary Resistant Safes
GB/T 15211-1994 Environmental Testing for Alarm Systems
GB 16796-2009 Safety Requirements and Test Methods for Security Alarm Equipment
GB/T 16810-2006 Tests and Requirements for Fire Resistance of Record Protection Containers
GB/T 17626.2-2006 Electromagnetic Compatibility (EMC) - Testing and Measurement Techniques - Electrostatic Discharge Immunity Test
GB/T 17626.3-2006 Electromagnetic compatibility - Testing and Measurement Techniques - Radiated Radio-frequency Electromagnetic Field Immunity Test
GA/T 73-1994 Thief Resistant Mechanical Locks
GA 374-2001 Thief Resistant Electronic locks
GA 701 General Specifications of Burglary Resistant Fingerprint Locks
GA/T 893-2010 Terms for Biometric Recognition in Security and Protection Systems

3 Terms and Definitions

For the purposes of this standard, the terms specified in GB 10409 and the following ones apply.

3.1

dedicated safe for gun and ammunition

the dedicated safe for storing guns or/and ammunition that is legally equipped and configured, which is called dedicated safe for short in this standard

3.2

anti-burglary electronic lock

the lock with certain anti-destruction ability, which recognizes and processes related message and controls the mechanical actuator in implementing the opening/closing electronically

Foreword i
1 Scope
2 Normative References
3 Terms and Definitions
4 Products Classification, Grading and Designation
5 Technical Requirements
6 Test Methods
7 Inspection Rules
8 Marking, Packaging, Transportation and Storage
Annex A (Normative) Interface Requirements for Designated Message