GB/T 10541-2013 in English

《GB/T 10541-2013近海停泊排吸油橡胶软管》由TC35（全国橡胶与橡胶制品标准化技术委员会）归口，TC35SC1（全国橡胶与橡胶制品标准化技术委员会软管分会）执行，主管部门为中国石油和化学工业联合会。
本标准规定了近海停泊排吸油用橡胶软管的分类和结构、一般要求、特殊要求、鉴定用样品软管、检验规则、标志和包装、贮存和运输。
本标准适用于环境温度介于-29 ℃~52 ℃之间、在海底或水面输送-20 ℃~82 ℃的芳香烃含量不超过50%的原油或液体石油产品、在-0.085MPa~1.5MPa内压力下工作的橡胶软管。
本标准适用于内径为400mm 及以下,不大于21m/s流速下连续输油作业和内径为400mm 以上,不大于15m/s流速下连续输油作业的橡胶软管。
本标准不适用于输送液化石油气和天然气的橡胶软管

Scope

This standard specifies the classification and structure, general requirements, special requirements, sample hoses for identification, inspection rules, marking and packaging, storage and transportation of rubber hoses for oil drainage and suction at offshore moorings. This standard is applicable to crude oil or liquid petroleum products with an ambient temperature between -29 °C and 52 °C, transporting -20 °C to 82 °C and aromatic hydrocarbon content not exceeding 50% on the seabed or water surface, at -0.085 MPa to 1.5 MPa Rubber hoses that work under internal pressure. This standard applies to rubber hoses with an inner diameter of 400 mm or less and continuous oil delivery operations at a flow rate of no more than 21 m/s, and rubber hoses with an inner diameter of 400 mm or more and a flow rate of no more than 15 m/s. This standard does not apply to rubber hoses for transporting liquefied petroleum gas and natural gas.