GB/T 11334-2005 in English
VALIDGeometrical Product Specifications(GPS)—Cone fit
- Issued on:2005-05-16
- Implemented on:2005-12-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$146.00
| Standard No: | GB/T 11334-2005 |
| Document status: | VALID |
| Title in English: | Geometrical Product Specifications(GPS)—Cone fit |
| Title in Chinese: | 产品几何量技术规范（GPS) 圆锥公差 |
| Language: | English |
| File Format: | Electronic (PDF) |
| Delivery: | Via email within 1~3 business days |
| Issued on: | 2005-05-16 |
| Implemented on: | 2005-12-01 |
| Superseding: |
GB 11334-1989 Cone tolerance
|
| ICS Classification: | 17.040.10-Limits and fits |
| Chinese Classification: | J04-Basic standards and general methods |
| Professional Classification: | GB-National Standard |
| Related Keywords: | cone angle tolerances
cone fit scopethis standard geometrical product specifications conical tolerances cone |
| Related Topics: | Product Geometry Technology
cone Product Geometry Specifications Calipers What is Quantum Yield Geometry GBT11334 GBT11334-1989 GB/T 11334-2005 gb/t 11334-2005 gb11334 |
本标准规定了圆锥公差的术语和定义、圆锥公差的给定方法及公差数值。
本标准适用于锥度C从1：3～1：500、长度L从6～630 mm的光滑圆锥。本标准中的圆锥角公差也适用于按GB/T 4096给定的棱体的角度与斜度。
Scope
This standard specifies the terms and definitions of conical tolerances, the given method of conical tolerances and tolerance values. This standard is applicable to smooth cones with taper C ranging from 1:3 to 1:500 and length L ranging from 6 to 630 mm. The cone angle tolerances in this standard are also applicable to the angle and slope of the prism given in GB/T 4096.
Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-
GB/T 8069-2024 in English
Geometrical product specifications (GPS)—Functional gauges
2024-09-29 -
GB/Z 24636.1-2009 in English
Geometrical Product Specifications(GPS)—Statistical tolerance—Part 1:Terms,definitions and basic concepts
2009-11-15 -
GB/T 4380-2004 in English
Assessment of departure from roundness - Two-and three-point methods
2004-01-01 -
GB/T 5371-2004 in English
Limits and fits - The calculation and selection of interference fits
2004-11-11 -
GB/T 17773-1999 in English
Tolerancing of orientation and location Projected tolerance zone
1999-06-01 -
GB/T 16857.1-2002 in English
Geometrical Product Specification (GPS) - Acceptance and reverification tests for coordinate measuring machines - Part 1: Vocabulary
2002-07-15 -
GB/T 1184-1996 in English
Geometrical tolerancing--Geometrical tolerance for features without individual tolerance indications
1996-12-28 -
GB/T 24635.4-2020 in English
Geometrical product specifications (GPS)—Coordinate measuring machines (CMM):Technique for determining the uncertainty of measurement—Part 4:Evaluating task-specific measurement uncertainty using simulation
2020-12-14 -
GB/T 5847-2004 in English
Dimensional chain--Methods of calculation
2004-11-11
