GB/T 11705-2009 in English
VALIDTest method for marine electric three-spindle screw pump
- Issued on:2009-03-09
- Implemented on:2009-11-01
- File Format:PDF
- Delivery:Via email within 1~3 business days
$233.00
本标准规定了船用电动三螺杆泵(以下简称泵)的试验项目、试验方法、试验结果的计算等。
本标准适用于船舶上输送燃油、滑油和液压油等清洁的润滑性介质(流量0.18 m3/h~720 m3/h、
出口压力0.2 MPa~25 MPa、轴功率0.25kW~600kW、净吸上高度+0.02 MPa~-0.06 MPa)的泵
的试验。
Scope
This standard specifies the test items, test methods, calculation of test results, etc. for marine electric three-screw pumps (hereinafter referred to as pumps). This standard is applicable to clean lubricating media such as fuel oil, lubricating oil and hydraulic oil on ships (flow rate 0.18m3/h~720m3/h), outlet pressure 0.2MPa~25MPa, Shaft power 0.25kW~600kW, net suction height +0.02MPa~-0.06MPa) pump test.

Loading PDF document...
Error loading PDF. Please make sure the file is valid and try again.
We also recommend
-

GB/T 35344-2017 in English
Marine mechanical brakes for shafting
2017-12-29 -

GB/T 47047-2026 in English
Marine structures—Mobile offshore units—Chain wheels
2026-01-28 -

GB/T 21483-2008 in English
Marine water jet pump
2008-03-03 -

GB/T 42687-2023 in English
Ships and marine technology—Marine cranes—Noise limits and measuring method
2023-05-23