Principles and methods of dynamic triaxial testing

Principles and methods of dynamic triaxial testing, Total:285 items.

The international standard classification for "Principles and methods of dynamic triaxial testing" includes: Hydraulic energy engineering , Construction materials in general , Agricultural machines, implements and equipment , Plain bearings , Mechanical testing , Generators , Rotating machinery in general , Vibrations, shock and vibration measurements , Deck equipment and installations , Acoustics and acoustic measurements , Motors , Milk and milk products , Alcohols. Ethers , Rolling bearings , Natural fibres , Other standards related to analytical chemistry , Raw materials and raw glass , Construction equipment , Aerospace electric equipment and systems .

The Chinese standard classification for "Principles and methods of dynamic triaxial testing" includes: Water conservancy and water power engineering in general , Basic standards and general methods , Farm, livestock, by-product and fish vehicles , Rolling bearing , Mechanical vibration, impact equipment and dynamic balancing machine , Asynchronous machine , Engine body and moving parts , Compartment auxiliary machine , Acoustic Measurement , Synchronous machine , Food sanitation , Tooth paste, soap and detergent , Cotton textile in general , Forestry chemical raw material , Moving parts , Hydraulic and pneumatic device , Medical apparatus and devices in general , Insulator , Sliding bearing , Ceramic and glass in general , Architectural engineering construction machinery , Spacecraft control and guidance system .

Professional Standard - Water Conservancy

SL 119-1995 Calibrating Methods of Rock Treaxial Testing Apparatus
SL 237-032-1999 Code for test of soil - dynamic triaxial test
SL 119-2012 Calibrating Methods of Rock Triaxial Testing Apparatus
SL 118-2014 Code for calibration of strain-controlled triaxial apparatus
SL 118-1995 Calibration method for strain-controlled triaxial apparatus

国家市场监督管理总局、中国国家标准化管理委员会

GB/T 36495-2018 Test method for physical properties of raw material of sintered brick and tile
GB/T 23931-2021 Tri-wheel vehicles—Test method
GB/T 40961-2021 Calibration methods of rock triaxial testing apparatus

General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China

GB/T 22388-2008 Determination of melamine in raw milk and dairy products
GB/T 24607-2009 Rolling bearings—Test and assessment for life and reliability
GB/T 44401-2024 Tri-axis simultaneous electrodynamic testing system
GB/T 1032-1985 Test procedure for three-phase induction motors
GB/T 15371-1994 Torsional vibration of crankshaft systems－Measurement and evaluation method
GB/T 1032-2005 Test procedures for three-phase induction motors
GB/T 6103-1985 Test method for fault in raw cotton
GB/T 307.2-2005 Rolling bearings - Measuring and gauging principles and methods
GB/T 24607-2023 Rolling bearings—Test and assessment for life and reliability
GB/T 307.2-1995 Rolling bearings; Tolerances gaging practice
GB/T 22159.1-2012 Acoustics and vibration—Laboratory measurement of vibro-acoustic transfer properties of resilient elements—Part 1:Principles and guidelines
GB/T 22669-2008 Test procedures for three-phase permanent magnet synchronous machines
GB/T 23931-2009 Tri-wheel vehicles—Test method
GB/T 1032-2012 Test procedures for three-phase induction motors
GB/T 13216.13-1991 Test methods for glycerines--Test of reducing substances
GB/T 11705-1989 Testing methods for marine electric three-spindle screw pump
GB/T 15371-2008 Torsional vibration of crankshaft system - Measurement and evaluation method
GB/T 11705-2009 Test method for marine electric three-spindle screw pump
GB/T 1032-2023 Iron ores—Determination of specific surface area—Test method using air-permeability apparatus (Blaine)

国家林业和草原局

LY/T 1082-2021 Test method for analysis of raw materials and products of vegetable tannin extracts

Professional Standard - Railway

TB/T 3017-2001 Method of Enduring Test for Rolling Stock Axle-box Rolling Bearing on Axle Boxes Test Machine
TB/T 3000-2000 Method of Thermal Test for Rolling Stock Axle Box Rolling Bearing on Axle Boxes Test Machine

Military Standard of the People's Republic of China-General Armament Department

GJB 573.11-1988 Fuze environment and performance test methods vibration test
GJB 8530-2015 Endurance test method for bearing of areo-engine shaft
GJB 573.34-1993(XG1-2015) Fuze Environment and Performance Test Method Coaxial Line Test Modification Sheet 1-2015
GJB 573.34-1993 Fuze environment and performance test methods coaxial line test

Group Standards of the People's Republic of China

T/CAOE 52-2023 Triaxial shear test method for hydrate-containing sediments
T/CAMET 04026-2021 Urban rail transit—Rolling bearings— Testing methods on test machine for axle box bearings of metro vehicle
T/CAMET 04026-2021*T/CBIAT 10004-2021 Bench test method for urban rail transit rolling bearings and metro vehicle axlebox bearings
T/CMES 24001-2018 Servo-hydraulic vibration test system with three-axis and six-degrees of freedom
T/CAMET 04026-2021 T/CBIAT 10004-2021 Bench test method for urban rail transit rolling bearings and metro vehicle axlebox bearings
T/CSAE 308-2023 Performance and test methods of commercial vehicle pitman arm shaft type electrical power steering gear

Professional Standard - Coal

MT/T 593.7-2011 Artificial Frozen Soil Physics Mechanics Performance Test - Part7 - Artificial Frozen Soil Tri-axial Creep Test Method
MT/T 593.5-2011 Artificial Frozen Soil Physics Mechanics Performance Test - Part5 - Artificial Frozen Soil Tri-axial Shear Test Method
MT/T 593.7-1996 Physical and Mechanical Properties Tests of Artificial Frozen Soil Part 7: Triaxial Shear Creep Test Method of Artificial Frozen Soil
MT/T 593.5-1996 Physical and Mechanical Properties Tests of Artificial Frozen Soil Part 5: Triaxial Shear Strength Test Method of Artificial Frozen Soil

Professional Standard - Agriculture

GB/Z 44363-2024 Pyrogenicity—Principles and methods for pyrogen testing of medical devices

Professional Standard - Machinery

JB/T 5893.5-1991 Raw Materials of Electrotechnical Porcelain Test Method of Physical Property
JB/T 10860-2008 Spherical plain bearings—Test code for dynamic load and life
JB/T 7361-2007 Rolling bearings--Test method for hardness of parts
JB/T 14577-2023 Rolling bearings－ Test and assessment methods of bearings for automotive steering pivot
JB/T 7361-2023 Rolling bearings－Test method for hardness of parts
JB/T 7920-1995 Plain bearings -- Methods of dimensional control -- Peripheral length checking of thin-walled half bearings
JB/T 7361-1994 Hardness test method for rolling bearing parts
JB/T 10510-2005 Test method for contact fatigue of rolling bearing material

水利部

SL/T 118-2014 Calibration method of strain controlled triaxial instrument

Professional Standard - Automobile

QC/T 523-1999 Automotive drive-shaft assembly -- Bench test method

机械电子工业部

JB 5893.5-1991 Test methods for physical properties of raw materials for electrical porcelain

中华人民共和国国家质量监督检验检疫总局、中国国家标准化管理委员会

GB/T 34171-2017 Test method for flexural property of thin and ultrathin glass--Three-point bending method

Professional Standard - Aviation

HBm 66.22-1988 Mini-truck - Bench Test Method for Drive Shaft Assembly
HB 20042-2011 Test methods of rotor thrust for aircraft engine
HB 20041-2011 Shaft assembly fatigue tests of aircraft engine

Professional Standard - Construction Industry

JG/T 5049.2-1994 Vibratory pile hammer Test procedures for vibration resistat asynchronous three-phase motor

国家铁路局

TB/T 3017.3-2016 Rolling Stock Bearing Bench Test Methods Part 3: Axle Box Rolling Bearings
TB/T 3017.1-2016 Bench test methods for rolling stock bearings Part 1: Axle box rolling bearings
TB/T 3407-2015 Test method for EMU bogie axle box composition

工业和信息化部/国家能源局

JB/T 13353-2017 Rolling bearings-Test and assessment methods for automotive hub bearing units

工业和信息化部

JB/T 13864-2020 Tri-wheel vehicles-Braking performance specifications and test methods

Professional Standard - Aerospace

QJ 2463-1993 Test method for three-axis stabilized satellite control system
QJ 1965-1990 Principles and Processing Methods of Wind Tunnel Test Data Acquisition

Professional Standard - Nuclear Industry

EJ/T 1001-1996 Principles and Calculation Method Regulations for Classification of Ore Quantity in Uranium Mine

British Standards Institution (BSI)

BS ISO 1132-2:2002 Rolling bearings. Tolerances. Measuring and gauging principles and methods
BS ISO 21250-1:2020 Rolling bearings. Noise testing of rolling bearing greases - Basic principles, testing assembly and test machine
BS EN 82045-1:2001 Document management. Principles and methods
BS ISO 1132-2:2001 Rolling bearings. Tolerances - Measuring and gauging principles and methods
BS ISO 704:2022 Terminology work. Principles and methods
BS 3144:1968 Methods of sampling and physical testing of leather
BS 5711-20:1979 Methods of sampling and test for glycerol - Test for reducing substances
PD ISO/TR 12112:2018 Metallic materials. Principles and designs for multiaxial fatigue testing
BS ISO 15242-1:2004 Rolling bearings - Measuring methods for vibration - Fundamentals
BS IEC 62153-4-3:2013+A1:2024 Metallic communication cable test methods - Electromagnetic compatibility (EMC) related test method for measuring surface transfer impedance. Triaxial method
23/30440695 DC BS ISO 7544. Rolling bearings. Test and assessment methods for cleanliness
BS EN IEC 62153-4-15:2021 Metallic cables and other passive components test methods. Electromagnetic compatibility (EMC). Test method for measuring transfer impedance and screening attenuation. or coupling attenuation with triaxial cell
BS 4427-13:1982 Methods of test for sodium tripolyphosphate (pentasodium triphosphate) and sodium pyrophosphate (tetrasodium pyrophosphate) for industrial use. Condensed phosphates for industrial use (including foodstuffs) - determination of calcium content - flame at...
PD ISO/TR 14294:2011 Workplace atmospheres. Measurement of dermal Exposure. Principles and methods
BS ISO 3548-1:2022+A1:2024 Plain bearings. Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
BS 3518-1:1993 Methods of fatigue testing - Methods of fatigue testing - Guide to general principles
BS ISO 3548:2000 Plain bearings. Thin-walled half bearings with or without Flange. Tolerances, design features and methods of test
BS ISO 3548:1999 Plain bearings - Thin-walled half bearings with or without Flange - Tolerances, design features and methods of test
19/30364140 DC BS ISO 21250-1. Rolling bearings. Noise testing of rolling bearing greases. Part 1. Basic principles, testing assembly, test machine
BS ISO 22241-2:2006 Diesel engines - NOx reduction agent AUS 32 - Test methods

International Organization for Standardization (ISO)

ISO/DIS 7544:2023 Rolling bearings — Test and assessment methods for cleanliness
ISO 21250-1:2020 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
ISO/CD 7544 Rolling bearings — Test and assessment methods for cleanliness
ISO/TR 21582:2021 Pyrogenicity — Principles and methods for pyrogen testing of medical devices
ISO/TR 9274:1991 Rolling bearings; measuring and gauging principles and methods
ISO 21250-4:2020 Rolling bearings — Noise testing of rolling bearing greases — Part 4: Test and evaluation method NQ
ISO 5725-1:1994 Accuracy (trueness and precision) of measurement methods and results - Part 1: General principles and definitions
ISO 3548:1999 Plain bearings - Thin-walled half bearings with or without flange - Tolerances, design features and methods of test
ISO 15242-1:2004 Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals
ISO 15242-1:2015 Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals
ISO 20462-2:2005 Photography - Psychophysical experimental methods for estimating image quality - Part 2: Triplet comparison method

Indonesia Standards

SNI 2815-2011 How to test triaxial compression on stone in the laboratory
SNI 8070-2016 Metode uji kelulusan air pada tanah jenuh dengan menggunakan sel triaksial
SNI 13-6660-2002 Determination for shear strength of rock by using of multistage triaxial test method

RU-GOST R

GOST R 59597-2021 Soils. Laboratory method for triaxial test of frozen soils
GOST 34763.2-2021 Three- and four-axle bogies of freight cars. Acceptance rules and test methods
GOST ISO 4386-2-1999 Plain bearings. Metallic multilayer plain bearings. Destructive testing of bond strength between the bearing metal and the backing
GOST R 52545.1-2006 Rolling bearings. Measuring methods for vibration. Part 1. Fundamentals

Association Francaise de Normalisation

NF F19-501:1989 Railway rolling stock. Method of testing greases for axle boxes to rolling bearings. Enduring test on axle boses test machine.
NF ISO 1132-2:2002 Bearings - Tolerances - Part 2: principles and methods of measurement and verification by gauge
NF F18-202:1989 Railway rolling stock - Method of testing rolling bearings for axle-boxes - Enduring test on axle boxes test machine.
NF EN 380:1993 Structures en bois - Méthodes d'essais - Principes généraux d'essais par chargement statique.
NF E22-337-2*NF ISO 1132-2:2002 Rolling bearings - Tolerances - Part 2 : measuring and gauging principles and methods
FD S99-513*FD ISO/TR 21582:2021 Pyrogenicity - Principles and methods for pyrogen testing of medical devices
NF F18-201:1989 Railway rolling stock. Method of testing roller bearing axle-box cases. Thermal test on axle boxes test machine.

KR-KS

KS B ISO 21250-1-2023 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
KS F 2498-2021(英文版) Standard test method for cyclic triaxial strength for evaluating soil liquefaction
KS B ISO 21250-2-2023 Rolling bearings — Noise testing of rolling bearing greases — Part 2: Test and evaluation method BQ+

American Society for Testing and Materials (ASTM)

ASTM D7181-11 Method for Consolidated Drained Triaxial Compression Test for Soils
ASTM D7181-20 Standard Test Method for Consolidated Drained Triaxial Compression Test for Soils
ASTM F3415-20 Standard Test Method for Triaxial Shear Strength and Cohesion of Equine Sports Surfaces
ASTM D2850-03a Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM D2850-03 Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM D4767-11(2020) Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D2850-03a(2007) Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM D2850-15 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM D2850-24 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM D2850-95(1999) Standard Test Method for Unconsolidated-Undrained Triaxial CompressionTest on Cohesive Soils
ASTM D4767-02 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D4406-93(1998) Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression
ASTM D4406-04 Standard Test Method for Creep of Cylindrical Rock Core Specimens in Triaxial Compression
ASTM D4767-11 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D2850-23 Standard Test Method for Unconsolidated-Undrained Triaxial Compression Test on Cohesive Soils
ASTM D4767-04 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D5311-11 Standard Test Method for Load Controlled Cyclic Triaxial Strength of Soil
ASTM D6515-00(2009) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00(2004) Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D6515-00 Standard Test Method for Rubber Shaft Seals Determination of Recovery From Bending
ASTM D5202/D5202M-16 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemically Grouted Soils
ASTM D3568-03(2009) Standard Test Methods for Rubber8212;Evaluation of EPDM (Ethylene Propylene Diene Terpolymers) Including Mixtures With Oil
ASTM D2892-24 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-23 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM E1347-06(2011) Standard Test Method for Color and Color-Difference Measurement by Tristimulus Colorimetry
ASTM D4767-95 Standard Test Method for Consolidated Undrained Triaxial Compression Test for Cohesive Soils
ASTM D2892-20 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D5202-02 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM D5202-91(1997) Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM D6045-02 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D5202-08 Standard Test Method for Determining Triaxial Compression Creep Strength of Chemical Grouted Soils
ASTM D2892-16 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-03 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D6045-96 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D3999-91(2003) Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM D6045-04 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D6045-09 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM D2892-19 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-18a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM E1885-04 Standard Test Method for Sensory Analysis8212;Triangle Test
ASTM D2892-17 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D2892-03a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM C1514-08(2017) Standard Test Method for Measurement of ²³⁵ U Fraction Using Enrichment Meter Principle
ASTM E1885-97 Standard Test Method for Sensory Analysis-Triangle Test
ASTM D3999-11 Standard Test Methods for the Determination of the Modulus and Damping Properties of Soils Using the Cyclic Triaxial Apparatus
ASTM D6045-12 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method
ASTM E2610-18 Standard Test Method for Sensory Analysis—Duo-Trio Test
ASTM C1514-02 Standard Test Method for Measurement of ²³⁵ U Fraction using the Enrichment Meter Principle
ASTM E2610-08 Standard Test Method for Sensory Analysis x2014; Duo-Trio Test
ASTM D2892-01 Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)
ASTM D3443-00 Standard Test Method for Chloride in Trichlorotrifluoroethane
ASTM D2892-99a Standard Test Method for Distillation of Crude Petroleum (15-Theoretical Plate Column)

Japanese Industrial Standards Committee (JISC)

JIS B 1515-2:2006 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
JIS K 2601:1990 Testing methods for crude petroleum
JIS B 6217:1990 Test code for performance and accuracy of single spindle automatic lathes (Fixed headstock type)
JIS K 5101-1-6:2004 Test methods for pigments -- Part 1: Methods of dispersion for assessment of dispersion characteristics -- Section 6: A triple-roll mill
JIS A 1509-1:2008 Test methods for ceramic tiles -- Part 1: Sampling and basis for acceptance
JIS K 1556:2006 Polyurethane raw materials -- Testing methods for toluene diisocyanate

Society of Automotive Engineers (SAE)

SAE ARP5448A-2007 Plain Bearing Test Methods
SAE ARP5448B-2013 Plain Bearing Test Methods
SAE ARP5483-2003 Rolling Element Bearing Test Methods
SAE ARP5483/4A-2018 Rolling Element Test Method for Axial Limit and Fracture Load Testing
SAE ARP5483/5A-2018 Rolling Element Bearing Test Method for Radial Limit and Fracture Load Testing
SAE ARP5483/6A-2018 Rolling Element Bearing Test Method for Dimensional Stability
SAE ARP5483/4-2007 Rolling Element Test Method for Axial Limit and Fracture Load Testing
SAE ARP5483/6-2007 Rolling Element Bearing Test Method for Dimensional Stability
SAE ARP5483-2008 Rolling Element Bearing Test Methods
SAE ARP5483B-2023 Rolling Element Bearing Test Methods
SAE ARP5448B-2018 Plain Bearing Test Methods
SAE ARP5483/6A-2013 Rolling Element Bearing Test Method for Dimensional Stability
SAE ARP4249-2001 Bearing Corrosion Test Method
SAE ARP4249-2006 Bearing Corrosion Test Method

Korean Agency for Technology and Standards (KATS)

KS B 4044-1986 Test code for performance and accuracy of single spindle automatic lathes(sliding headstock type)
KS B 4044-2007 Test code for performance and accuracy of single spindle automatic lathes(sliding headstock type)
KS F 2346-2022 Test method for unconsolidated undrained strength of cohesive soils in triaxial compression test
KS B 4045-2007 Test code for performance and accuracy of multispindle automatic lathes
KS B 4043-2007 Test code for performance and accuracy of single spindle automatic lathes(Fixed headstock type)
KS X ISO 704-2020 Terminology work－Principles and methods
KS B 4043-1981 Test code for performance and accuracy of single spindle automatic lathes(Fixed headstock type)
KS K 0405-2015 Test method for kinetic friction of yarn：Yarn against steel
KS B 4045-2007(2012) Test code for performance and accuracy of multispindle automatic lathes
KS F 2498-2021 Standard test method for cyclic triaxial strength for evaluating soil liquefaction
KS K 0405-1984 Test method for kinetic friction of yarn：Yarn against steel
KS K 0105-2022 General principles of physical testing methods for textiles
KS C 4201-2002 Testing methods of three-phase induction motor characteristics
KS C 4201-1997 Testing methods of three-phase induction motor characteristics
KS C 4201-1986 Testing methods of three-phase induction motor characteristics
KS B 2031-1968 Inspection Method for rolling bearing
KS M 2116-2007(2022) Testing methods for crude petroleum
KS B ISO 12123:2016 Raw optical glass in bulk and preshaped forms－Bubblesand other inclusions－Test method and classification
KS B ISO 12123:2006 Raw optical glass in bulk and preshaped forms-Bubblesand other inclusions-Test method and classification
KS F 2346-2007 Testing method for unconsolidated, undrained strength of cohesive soils in triaxial compression
KS B 4919-1995(2010) Self-centering manually-operated chucks for machine tools-acceptance test specifications(geometrical tests)
KS B 7851-2007 Testing method for power take-off performance of agricultural tractors
KS E 3035-2008 Iron ores－Determination of reducibility
KS A ISO 20462-2:2007 Photography－Psychophysical experimental methods for estimating image quality－Part 2：Triplet comparison method

SCC

CAN/CSA-Z780-1992 Principles and methods of terminology
ABMA/ISO 15242-1-2004 Rolling Bearings - Measuring methods for vibration - Part 1: Fundamentals
AASHTO T 297-1994(2016) Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils (ASTM D 4767-88e1)
BS PD ISO/TR 12112:2018 Metallic materials. Principles and designs for multiaxial fatigue testing
BS DD 195-2:1991 Hydraulic couplings-Method of test for couplings intended for use in fluid power systems
BS 903-A33:1985 Physical testing of rubber-Methods of test for staining in contact with organic materials
DIN /TR 91143-1:2022 Rheological test methods - Part 1: Determination of the yield point - Fundamentals and comparative testing methods; Text in German and English
CAN/CSA Z780-1992(R2000) Principles and Methods of Terminology (Adopted ISO 704:1987)
NS-EN 14049:2003 Water application intensity — Calculation principles and measurement methods
AASHTO T 226-2022 Standard Method of Test for Triaxial Compressive Strength of Undrained Rock Core Specimens without Pore Pressure Measurements
DANSK DS/EN 14049/A1:2004 Water application intensity - Calculation principles and measurement methods
DANSK DS/EN 14049:2004 Water application intensity - Calculation principles and measurement methods
BS PD ISO/TR 14294:2011 Workplace atmospheres. Measurement of dermal Exposure. Principles and methods
BS 2000-168:1982 Methods of test for petroleum and its products-Rolling bearing performance test for lubricating greases
BS 6749-1:1986 Measurements and evaluation of vibration on rotating shafts-Guide to general principles
AASHTO T 296-2022 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
BS 2000-168:1987 Methods of test for petroleum and its products-Rolling bearing performance test for lubricating greases
AASHTO T 296-2005 Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression
AASHTO T 296-2010(2020) Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression

American National Standards Institute （ANSI)

ANSI/ABMA/ISO 15242-1:2011 Rolling bearings - Measuring methods for vibration - Part 1: Fundamentals
ANSI/SCTE 66-2008 Test Method for Coaxial Cable Impedance
ANSI/ASME B89.3.4M-1985 Axes of Rotation, Methods for Specifying and Testing
ANSI/SCTE 72-2002 Test Method for Axial Load Temperature

The American Road & Transportation Builders Association

AASHTO T 297-94(R2016) Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils
AASHTO T 297-1994(R2007) Standard Method of Test for Consolidated, Undrained Triaxial Compression Test on Cohesive Soils
AASHTO T 296-2010(R2020) Standard Method of Test for Unconsolidated, Undrained Compressive Strength of Cohesive Soils in Triaxial Compression

German Institute for Standardization

DIN ISO 21250-1:2022-12 Rolling bearings - Noise testing of rolling bearing greases - Part 1: Basic principles, testing assembly and test machine (ISO 21250-1:2020); Text in German and English / Note: Date of issue 2022-10-28
DIN 623-2:2000 Rolling bearings - Fundamental principles - Part 2: Graphical representation of rolling bearings
DIN EN 380:1993 Timber structures; test methods; general principles for static load testing; German version EN 380:1993
DIN ISO 21250-1:2023-09 Rolling bearings - Noise testing of rolling bearing greases - Part 1: Basic principles, testing assembly and test machine (ISO 21250-1:2020)
DIN ISO 21250-1:2023 Rolling bearings - Noise testing of rolling bearing greases - Part 1: Basic principles, testing assembly and test machine (ISO 21250-1:2020)
DIN 51819-3:2016 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils - applied test bearing: axial cylindrical roller bearing
DIN 51819-3:2005 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 3: Test method for lubricating oils, axial cylindrical roller bearing
DIN 51819-1:2016 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
DIN 51819-1:1999 Testing of lubricants - Mechanical-dynamic testing in the roller bearing test apparatus FE8 - Part 1: General working principles
DIN 623-2:2000-06 Rolling bearings - Fundamental principles - Part 2: Graphical representation of rolling bearings
DIN V 70071:2005 Diesel engines - NOx reduction agent AUS 32 - Test methods
DIN-Fachbericht 143:2005 Modern rheological test methods - Part 1: Determination of the yield point - Fundamentals and comparative testing methods

GSO

BH GSO ISO 21250-1:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
GSO ISO 21250-1:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 1: Basic principles, testing assembly and test machine
BH GSO ISO 1132-2:2016 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
OS GSO ISO 1132-2:2013 Rolling bearings -- Tolerances -- Part 2: Measuring and gauging principles and methods
GSO ISO 21250-4:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 4: Test and evaluation method NQ
BH GSO ISO 21250-3:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 3: Test and evaluation method MQ
GSO ISO 21250-3:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 3: Test and evaluation method MQ
BH GSO ISO 21250-4:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 4: Test and evaluation method NQ
GSO ISO 21250-2:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 2: Test and evaluation method BQ+
BH GSO ISO 21250-2:2023 Rolling bearings — Noise testing of rolling bearing greases — Part 2: Test and evaluation method BQ+
GSO ASTM D6045:2024 Standard Test Method for Color of Petroleum Products by the Automatic Tristimulus Method

BE-NBN

NBN-EN 380-1994 Timber structures - Test methods - General principles fpr static load testing

RO-ASRO

SR 7246-1998 Three phase asynchronous motors. Test methods
SR 7246/C1-1999 Three phase asynchronous motors. Test methods
STAS 7246/8-1974 THREE-PHASE INDUCTION MOTORS TEST METHODS Temperature-rise test
STAS SR ISO/TR 9274:1995 Rolling bearings - Measuring and gauging principles and methods

CZ-CSN

CSN 72 1031-1987 Laboratory triaxial shear test of soils
CSN 30 7075-1987 Front driving axle. Technical requirements and test methods

SAE - SAE International

SAE ARP5483/5-2007 Rolling Element Bearing Test Method for Radial Limit and Fracture Load Testing
SAE ARP5483B-2017 Rolling Element Bearing Test Methods
SAE ARP5448-2001 Plain Bearing Test Methods
SAE ARP4249-1994 Bearing Corrosion Test Method
SAE ARP4249A-2015 Bearing Corrosion Test Method

CN-QIYE

Q/GDYY 002-2011 General Principles and Methods of Tobacco Field Trials in Guangdong Province

Canadian General Standards Board （CGSB)

CGSB 4.2 NO. 9.1-M90-CAN/CGSB-1990 Methods for Textile Tests Resistance to Fabric Breakage - Frayed Strip Method - Principle of Constant Time Breakage
CGSB 4.2 NO. 9.2-M90-CAN/CGSB-1990 Methods for Textile Tests Resistance to Fabric Breakage - Pull-off Method - Principle of Constant Time Breakage
CGSB 25.1 NO. 29.1-95-CAN/CGSB-1995 Methodes D'Echantillonnage Et D'Essai Des Cires Et Encaustiques Decapage

Standard Association of Australia （SAA）

AS 1289.1.1:2001 Methods of testing soils for engineering purposes - Sampling and preparation of soils - Preparation of disturbed soil samples for testing
AS 2300.1.10:2008 Methods of chemical and physical testing for the dairying industry Method 1.10: General methods and principles— Determination of phosphatase activity