GB/T 13924-2008 in English

VALID

Inspection code for accuracy of involute cylindrical gears

Issued on:2008-05-06
Implemented on:2008-11-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $930.00
$903.00

Standard No:	GB/T 13924-2008
Document status:	VALID
Title in English:	Inspection code for accuracy of involute cylindrical gears
Title in Chinese:	渐开线圆柱齿轮精度检验细则
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	2008-05-06
Implemented on:	2008-11-01
Superseding:	GB/T 13924-1992 Inspection code for accuracy of involute cylindrical gears
ICS Classification:	21.200-Gears
Chinese Classification:	J17-Gear and gear drive
Professional Classification:	GB-National Standard
Related Keywords:	single involute cylindrical gears involute cylindrical product gears involute cylindrical gears scopethis standard applies inspection code tooth pitch deviation
Related Topics:	rules capillary separation Roundness and Cylindricity precision test precision test How to check the gear Cylindricity detection method Gradually end GBT13924 GB/T 13924-1992 GB/T 13924-2008 Involute Cylindrical Teeth Involute spur gear Gear precision Involute Gear Accuracy Rack and pinion inspection Cylindrical gear Involute cylindrical gear drawing annotation din3974 tooth accuracy German standard involute gear Gear cylindricity GB13924 gb/t 13924-2008 Gearbox water test inspection gb/t13924

《GB/T 13924-2008渐开线圆柱齿轮精度检验细则》由TC52（全国齿轮标准化技术委员会）归口，主管部门为国家标准化管理委员会。
本标准是GB/T 10095.1《圆柱齿轮精度制第1部分：轮齿同侧齿面偏差的定义和允许值》、GB/T 10095.2《圆柱齿轮精度制第2部分：径向综合偏差与径向跳动的定义和允许值》的配套标准。
本标准是对GB/T 13924-1992《渐开线圆柱齿轮精度检验规范》的修订本标准适用于其法向模数（0.5～70）mm、齿宽（4～1000）mm、分度圆直径（5～1000）mm的平行轴传动的单个渐开线圆柱齿轮。其基本齿廊为GB/T1356-2001《通用机械和重型机械用圆柱齿轮标准基本齿条齿廊》规定的齿廊。本标准用于渐开线圆柱型产品齿轮精度的评价。

Scope

This standard applies to single involute cylindrical gears driven by parallel shafts with normal modulus (0.5-70) mm, tooth width (4-1000) mm, and pitch circle diameter (5-10000) mm. Its basic tooth profile is the tooth profile specified in GB/T 1356-2001. This standard is used to evaluate the accuracy of involute cylindrical product gears. This standard specifies the detailed inspection rules for items such as tooth pitch deviation, tooth profile deviation, helical deviation, tangential comprehensive deviation, radial comprehensive deviation and radial runout defined in GB/T 10095.1 and GB/T 10095.2.

More samples: YD/T 3934-2021 NB/T 47013.2-2015 GB 18306-2015

Sample only — not a preview of GB/T 13924-2008

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 1356-2001 in English

Cylindrical gears for general and heavy engineering--STANDARD basic rack tooth profile
2001-12-17
GB/T 30819-2024 in English

Harmonic drive gear reducers for robot
2024-09-29
GB/T 40729-2021 in English

Fatigue life test method for precision gear transmission
2021-10-11
GB/T 8542-2023 in English

High speed gear units technical specifications
2023-09-07
GB/T 10062.1-2003 in English

Calculation of load capacity of bevel gear - Part 1: Introduction and general influence factors
2004-06-01
GB/T 3374.1-2010 in English

Vocabulary of gear terms—Part 1:Definitions related to geometry
2010-08-09
GB/T 3480.1-2019 in English

Calculation of load capacity of spur and helical gears—Part 1: Basic principles, introduction and general influence factors
2019-12-31
GB/T 12369-1990 in English

Basic tooth profile of straight and skew bevel gears
1990-06-26
GB/T 15752-1995 in English

Terminology of circular-arc gear
1995-01-01
GB/T 2821-2003 in English

Gear—Symbols for geometrical data
2003-11-25