GB/T 15820-1995 in English

VALID

Test of resistance to pull out of joints between polyethylene (PE) pressure pipes and fittings

Issued on:1995-01-02
Implemented on:1996-08-01
File Format:PDF
Delivery:Via email within 1~3 business days

Price(USD)： $60.00
$59.00

Standard No:	GB/T 15820-1995
Document status:	VALID
Title in English:	Test of resistance to pull out of joints between polyethylene (PE) pressure pipes and fittings
Title in Chinese:	聚乙烯压力管材与管件连接的耐拉拔试验
Language:	English
File Format:	Electronic (PDF)
Delivery:	Via email within 1~3 business days
Issued on:	1995-01-02
Implemented on:	1996-08-01
Professional Classification:	GB-National Standard
Related Keywords:	polyethylene pressure pipes pressure pipes fittings scopethis standard longitudinal tensile resistance test method
Related Topics:	GB/T 15820 GB/t+15820 gb t15820 Pull-out test of connections between polyethylene pressure pipes and fittings gb/t15820- GB/T+15820-1995 "Pull-out test of polyethylene pressure pipes and fittings" Pull test gb+t15820 gb 15820 gb15820 GB t 15820 gb+15820 Component tension Pull-off tester gb/t15820 Polyethylene pipe pressure Pipe Fittings Pipe Fittings Pull test Pull test GBT15820 Polyethylene pipe Pipes and Fittings pipe pipe fittings Pressure gauge connecting pipe How to measure the pull-out force of latex tubes Terminal pull test Plastic parts pulling force Pullout force test of lining embedded parts Wire harness pulling force test Welding pullout force test Hose voltage resistance test standard Connector pull test Connector pull test standards Tape pull-out force test Crimp gun tubing gb15820-1995

《GB/T 15820-1995聚乙烯压力管材与管件连接的耐拉拔试验》由TC48（全国塑料制品标准化技术委员会）归口，主管部门为中国轻工业联合会。
本标准规定了聚乙烯压力管材与管件连接后，耐纵向拉力的试验方法。本标准适用于直径不大于63mm的聚乙烯(PE)压力管材与不同材质，不同结构形式的管件的连接。本标准不适用于熔焊连接。

Scope

This standard specifies the test method for longitudinal tensile resistance of polyethylene pressure pipes and fittings after they are connected. This standard applies to the connection of polyethylene (PE) pressure pipes with a diameter not greater than 63mm and pipe fittings of different materials and structures. This standard does not apply to welded connections.

More samples: DL/T 368-2010 GB 18306-2015 JJG 21-2008

Sample only — not a preview of GB/T 15820-1995

Loading PDF document...

Error loading PDF. Please make sure the file is valid and try again.

We also recommend

GB/T 27622-2011 in English

Design specifications for animal manure storage facility
2011-12-30
GB/T 15314-2024 in English

Specifications for precise engineering survey
2024-05-28
GB/T 15057.10-1994 in English

Limestone for chemical industry - Determination of content of loss on ignition- Gravimetric method
1994-05-05
GB/T 25209-2022 in English

Commercial coal marking
2022-10-12
GB/T 7939.1-2024 in English

Connections for hydraulic fluid power—Test methods—Part 1: Connectors
2024-03-15
GB/T 4074.4-2024 in English

Test methods of winding wires—Part 4: Chemical properties
2024-04-25
GB 7300.802-2023 in English

Feed additives—Part 8: Preservatives，mildew preventives and acidity regulators— Propionic acid
2023-11-27
GB/T 100-1986 in English

Slotted countersink head wood screws
1986-07-02
GB/T 42467.2-2023 in English

Clinical terminology of traditional Chinese medicine—Part 2：External medicine
2023-03-17
GB 3800-1983 in English

Technical requirements for automobile frames being overhauled
-