Crimp gun tubing
Crimp gun tubing, Total:95 items.
The international standard classification for "Crimp gun tubing" includes: IT applications in other fields .
The Chinese standard classification for "Crimp gun tubing" includes: Gas supply engineering , Lubrication and lubrication device , Social and public safety in general .
Professional Standard - Military and Civilian Products
- WJ/Z 303-1992 Barrel Design Rough Design
- WJ/Z 324-1994 Gun barrel straightening process
- WJ 1337-2005 Technical conditions for welding of firearms
- WJ 2559-2000 Firearm Interface Technical Requirements
- WJ/Z 298-1992 General provisions for barrel design
- WJ/Z 387-1995 7.62mm caliber rifle and submachine gun barrel inner hole processing time quota
- WJ/Z 300-1992 Barrel Design Structural Design
- WJ/Z 301-1992 Barrel Design Material Selection
- WJ 2654-2005 Specification for 5.8 mm velocity ballistic guns and pressure ballistic guns
- WJ 473-2005 Specification for 14.5mm and 12.7mm velocity ballistic and pressure ballistic guns
Professional Standard - Urban Construction
- CJ/T 433-2013 Press connection carbon steel tubes and fittings
Professional Standard - Light Industry
- QB/T 5943-2023 The division and determination ofthe quality grade ofthe piano
Group Standards of the People's Republic of China
- T/ZGWJHXH 4-2019 High pressure airless spray gun
- T/ZZB 2456-2021 Press bar type grease gun
- T/ZZB 1649-2020 Low pressure air spray guns
- T/CGAS 016-2021 Press connection pre-coated carbon steel pipe and fittings for gas supply
- T/CFPA 012-2022 Press connection coated carbon steel pipe and fitting for fire protection
- T/SDWJ 004-2022 Glue gun
- T/JSQA 162-2023 High voltage charging gun connectors for new energy vehicles
- T/ZZB 2044-2021 Press connection coated carbon steel tubes and fittings
- T/WLJC 28-2020 Environment-friendly spray guns
未注明发布机构
- DIN ISO 10656 E:2015-05 Electric resistance welding - Integrated transformers for welding guns
Professional Standard - Machinery
- JB/T 11750-2013 Pistol-grip hydraulic rivet driver
- JB/T 7942.1-1995 Lever type grease guns
Taiwan Provincial Standard of the People's Republic of China
- CNS 11154-1984 Grease Guns-Rush Type Hand Guns
- CNS 14715-2003 Electric resistance welding－Integrated transformers for welding guns
Professional Standard - Forestry
- LY/T 1054-1991 Shotgun Bottom Firearm
Professional Standard - Public Safety Standards
- GA/T 624.25-2006 Specifications for management information of firearms -- Part 25:Coding for holders permit of a firearm for domestic purpose
- GA/T 624.3-2006 Specifications for management information of firearms - Part 3: Codes for firearms
- GA/T 624.20-2006 Specifications for management information of firearms - Part 20: Coding for individuals holding firearms
- GA/T 624.19-2006 Specifications for management information of firearms -- Part 19: Coding for firearms
- GA/T 624.24-2006 Specifications for management information of firearms -- Part 24: Coding for holders permit of a firearm for offical purpose
- GA/T 624.23-2006 Specifications for management information of firearms - Part 23: Coding for certificate of a firearms for offical purpose
- GA/T 624.3-2013 Specifications for management information of firearms—Part 3:Codes for firearms
- GA/T 624.17-2006 Specifications for management information of firearms -- Part 17: Coding for offical institutions possessing firearms
- GA/T 624.2-2006 Specifications for management information of firearms -- Part 2: Codes for the management information of firearms and ammunition
- GA/T 624.6-2006 Specifications for management information of firearms - Part 6: Codes for license to possess a firearm for domestic purposes
- GA/T 624.1～624.28-2006 Specifications for management informatioin of firearms
- GA/T 624.1-2006 Specifications for management information of firearms -- Part 1: Basic data items for management information of firearms
General Administration of Quality Supervision, Inspection and Quarantine of the People's Republic of China
- GB/T 15820-1995 Test of resistance to pull out of joints between polyethylene (PE) pressure pipes and fittings
Indonesia Standards
- SNI 07-1453-1989 Low pressure oxy-acethylene welding torches
CZ-CSN
- CSN 39 5045-1992 The pistol and revover barrels
- CSN 39 5122-1985 Dimensions of ball cartridges (for rifled barrels)
- CSN 23 1462-1976 UniversaI hnnd-operated high-pressure grease guns
European Committee for Standardization (CEN)
- EN ISO 10656:2021 Resistance welding equipment - Transformers - Integrated transformers for welding guns (ISO 10656:2016, Corrected version 2016-08)
International Organization for Standardization (ISO)
- ISO 10656:1996 Electric resistance welding - Integrated transformers for welding guns
- ISO 10656:2016 Resistance welding equipment - Transformers - Integrated transformers for welding guns
- ISO 10656:1996/Cor 1:2000 Electric resistance welding - Integrated transformers for welding guns; Technical Corrigendum 1
- ISO 22829:2007 Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency
- ISO 3458:1976 Assembled joints between fittings and polyethylene (PE) pressure pipes ; Test of leakproofness under internal pressure
- ISO 3458:2015 Plastics piping systems - Mechanical joints between fittings and pressure pipes - Test method for leaktightness under internal pressure
- ISO 14236:2000 Plastics pipes and fittings - Mechanical-joint compression fittings for use with polyethylene pressure pipes in water supply systems
Association Francaise de Normalisation
- NF A82-043:1996 Electric resistance welding. Integrated transformers for welding guns.
Korean Agency for Technology and Standards (KATS)
- KS B ISO 10656:2005 Electric resistance welding－Integrated transformers for welding guns
- KS B ISO 10656:2021 Resistance welding equipment — Transformers — Integrated transformers for welding guns
- KS B 7105-2013 Dimensions of hose-connector of gun type nozzle assemblyfor power sprayers
- KS B 7105-2000(2009) Dimensions of hose-connector of gun type nozzle assemblyfor power sprayers
- KS C ISO 22829:2007 Resistance welding-Transformer-rectifier for welding guns with integrated transformers-Transformer-rectifier units operating at 1 000 Hz frequency
KR-KS
- KS B ISO 10656-2021 Resistance welding equipment — Transformers — Integrated transformers for welding guns
IN-BIS
- IS 10491-1983 Specifications for single and double barrel muzzleloading shotguns
- IS 10742-1983 Specification for metal rods and bars for casting guns
German Institute for Standardization
- DIN 1282:1990 Grease guns; push type-hand gun
- DIN 74304:1987 Compression coupling; hose coupling
SE-SIS
- SIS SEN 24 12 40-1960 av aluminium
U.S. Military Regulations and Norms
- ARMY MIL-DTL-001298 D (1)-2008 GUN, MACHINE; CALIBER .50, BROWNING, M2, HEAVY BARREL
- ARMY MIL-DTL-001298 D VALID NOTICE 1-2013 Gun, Machine; Caliber .50, Browning, M2, Heavy Barrel
- ARMY MIL-M-70542 (1)-1991 MUZZLE BORESIGHT DEVICE: 11785384 (M26 FOR 105MM GUN TUBE)
- ARMY MIL-M-70542-1985 MUZZLE BORESIGHT DEVICE: 11785384 (M26 FOR 105MM GUN TUBE)
- ARMY MIL-B-70448 VALID NOTICE 2-2013 Barrel, Machine Gun, Cal .50, Recoil Amplifier, Practice, M3
- ARMY MIL-B-70448-1987 BARREL, MACHINE GUN, CAL .50, RECOIL AMPLIFIER, PRACTICE, M3
- ARMY MIL-B-70448 NOTICE 1-1997 BARREL, MACHINE GUN, CAL .50, RECOIL AMPLIFIER, PRACTICE, M3
Japanese Industrial Standards Committee (JISC)
- JIS K 4818:1974 Percussion caps for shot gun
SCC
- MIL MIL-DTL-1298E-2019 GUN, MACHINE; CALIBER .50, BROWNING, M2, HEAVY BARREL
- MIL MIL-H-3868F-1985 HOSE ASSEMBLIES, NON-METALLIC: GREASE GUN HIGH AND LOW PRESSURE (S/S BY SAE-J517-2003)
- SAE MA2002A-1993 Impulse Testing of Hydraulic Hose, Tubing and Fitting Assemblies
- AENOR UNE 26030:1951 PRESSURE GREASE GUNS. FLAT HEAD TYPE
- MIL MIL-M-48640-1986 MUZZLE BORESIGHT DEVICE 9364909 (M27 FOR 120MM GUN TUBE)
- MIL MIL-B-70448-1987 BARREL, MACHINE GUN, CAL .50, RECOIL AMPLIFIER, PRACTICE, M3
- MIL MIL-DTL-001298D-2007 GUN, MACHINE; CALIBER .50, BROWNING, M2, HEAVY BARREL(SUPERSEDING MIL-G-1298A)
- AS 1477.6:1973 Unplasticized PVC (UPVC) pipes and fittings for pressure applications (metric units) - Rubber ring joints for UPVC pressure pipes and fittings
National Association of Pipe Fabricators (NAPF)
- PFI ES-26-2005 Welded Load Bearing Attachments to Pressure Retaining Piping Materials
- PFI ES-26-2002 Welded Load Bearing Attachments to Pressure Retaining Piping Materials
- PFI ES-26-2013 Welded Load Bearing Attachments to Pressure Retaining Piping Materials
HU-MSZT
- MSZ KGST 2515-1980 Drilling gun connecting piece
United States Navy
- NAVY MIL-G-21110 REINST NOTICE 2-1998 GUN BARREL, GENERAL SPECIFICATION FOR
- NAVY MIL-G-21110-1957 GUN BARREL, GENERAL SPECIFICATION FOR
RU-GOST R
- GOST R 56155-2014 Welding of polymeric materials. Extrusion welding of pipes, piping parts and panels
U.S. Air Force
- AIR FORCE A-A-58061-1996 SOLDERING - DESOLDERING STATION
Association of German Mechanical Engineers
- DVS 2207-4 Beiblatt 1-2006 Welding parameters for extrusion welding of welded pipes, fittings and panels of thermoplastics
- DVS 2207-4 Beiblatt 1-2005 Welding parameters for extrusion welding of welded pipes, fittings and panels of thermoplastics
- DVS 2207-4 Beiblatt 1-2003 Welding parameters for extrusion welding of welded pipes, fittings and panels of thermoplastics
- DVS 2207-4 Beiblatt-1991 Welding of thermoplastics; extrusion welding; welding parameters for sheets and pipes PE-HD and PP
PL-PKN
- PN M69162-1974 Welding torches for tungsten argon arc welding
British Standards Institution (BSI)
- BS ISO 22829:2007 Resistance welding - Transformer-rectifier for welding guns with integrated transformers - Transformer-rectifier units operating at 1000 Hz frequency
IT-UNI
- UNI 10521-2021 Welding of plastic materials - Electro-fusion welding - Welding of polyethylene pipes and/or fittings for pressure piping
